How to re-enable automatically stop mode "sleep" after a full recovery
I had to do a full restore without back up and now I can't find Eve self-closing.
I had to do a full restore without back up and now I can't find Eve self-closing.
If you are referring to what you want your power button to be pressed, then right-click your ORB 'Start', select 'Properties' and click on the Startup tab. See power settings, click Start 'orb' and type 'Power'. Select the one that best matches the bet you try to change in the list.
Tags: Windows
Similar Questions
-
How can we enable the html mode of the e-mail to the 9800 blackberry Simulator
How can we enable the html mode of the e-mail to the 9800 blackberry Simulator?
When I sent messages html Simulator, it only shows text.
the Simulator does not support html emails
-
Satellite P10 automatically goes to sleep after 15 minutes
My Satellite P10 automatically goes to sleep after 15 minutes. This is a setting that is controlled by Toshiba or the Console of Toshiba power management settings.
When I change the settings it the system will always standby after 15 minutes. When I go into Control Panel control/Performance and Maintenance/Power Options, it tells me to go to the Toshiba power management to change the settings, but I still see the parameters in grey indicating the standby time of 15 minutes.
But in the Toshiba power management, I can't seem to be able to adjust the sleep settings, so that they work effectively. There must be something for her...
Can someone help me understand?
Thank you very much
LerakHello
The fact is that if Toshiba energy saving is installed on the laptop Toshiba, the Microsoft OS power management doesn't work. You must use the Toshiba power saver to change settings.
In power save you will find different modes.
If the power supply is on if you need to change the power mode in the power section. Here, you simply mark the mode full power and click for details.
You can now find mode properties. Select the Power Saver tab.
You will find various controls that are responsible for different functions. Change the settings on the standby system controller. -
PowerShot SX510 HS automatically stops video recording after 10-15 minutes in the record.
PowerShot SX510 HS automatically stops video recording after 10-15 minutes on continuous recording. Is there a way to disable this option? I would like to record videos up until I press the button stop recording or the battery is low. I've disabled all the setting of energy saving, at least, I think I have.
The camera has some limitations for registration, as do all models of Canon. Here's how you can extend your durations for registration to a maximum of about 1 hour, but there is a limit of 4BG regardless so once he hits 4 GB recording stops and has to be restarted.
Also, the memory card has to be at least a class 6 rating or recording will stop as soon as possible regardless of the size of the clamp.
It comes to page 161 of your manual
-
Satellite A100: How do I enable SATA NATIVE mode
Hello, my laptop Satellite A100 PSAA9 and the southbridge is an ICH7M
I put an SSD in my laptop and the drive controller is locked-> Ultra DMA 6 IDE compatible mode.
I would switch to the native SATA-1 to increase the bandwidth (from 110 MB/s-150), but I can't find any setting so that, in the last BIOS 6.00I think that maybe in the past, Toshiba has enable this feature, but I suppose they might have turned it off for beginners who don't know how to install the SATA drivers during the installation of Windows.
I found Toshiba BIOS database, but it is locked by a password.
I'm willing to test any BIOS that could re - enable native SATA mode+ The message was edited: link has been removed - unauthorized +.
Hello
You need the native SATA controller?
The laptop was equipped with a controller SATA interface supports the Serial ATA Rev. 1. 0a.
Some laptop models take a BIOS that contains a SATA mode option.
This option can be changed on AHCI or in compatibility mode.But as far as I know a100 BIOS does not contain these settings
-
Original title: I just bought Microsofts model 3000 wireless keyboard
I can't find a function key that I can spend my laptop mode 'sleep and/or standbay '. How can I make this wiith this probuct?
Hello smilingron,
You have a sleep button separated from the keyboard that you can use to put the computer to sleep. You can consult the manual that came with the keyboard gives you will help you to find the right key.
Thank you
Irfan H, Engineer Support Microsoft Answers. -
How to keep your computer in mode 'sleep'
You want to put the computer in standby mode during the night. Click sleep with only stay menu but will start in the mode "sleep" for a minute or so and then comes back on. Why? How do I so he could sleep till 02:00 anti-virus at startup?
Hello
You are not interested more trying to get your PC in mode 'sleep'?
Try to get the information that I requested and also try this.
1. click on start.
2. click on Control Panel
3. click on Click System
4. click on Device Manager.
5. click on the plus sign on NICs droping it down and right-click your network controller, click Properties.
6. go in the tab power management, uncheck "allow this device to wake the computer".Do the same for the mouse and keyboard as well...
Report if it helped to solve the problem!
Thank you
-
until someone says "its been answered" and "look at other messages ' u try these directions and let me know if it works. cause I did, and if you're smart enough, I'm sure you can understand my result of posting me my question as well. I had older versions of windows (xp and 98) and when the computer was put in mode 'sleep' it wouldn't keep turn on/off devices. Now in windows 7, it's a totally different story. What ould iw as is for the usb power switch off appliances like the old way. Francis IS at ALL possible? because of everything I've seen here, it DOES not work. No, changing the thing selective usb to allow disabling power management GOLD DOES not work. NO, by checking or unchecking the checkbox in the Device Manager, etc., for the USB ROOT HUB to "allow the device to turn off the power" or whatever it says DOES NOT work either. All what I want to know is, is possible to do this, turn off the power for something as simple as an external fan or a hard drive will be TURNED OFF like it USE TOO. Please do not post instructions on how to do the 2 steps that I mentioned. Really annoying because it's what keeps popping up for everyone to do and then you see inside people answer "N" T WORK." And also do without consulting me the manufacturer for support, cause this is the problem of MICROSOFT, is not a problem of the Lim. A lot of people have this problem, microsoft turns, find something here...
It is also for period of SLEEP mode. Yes I know he doesn't put into hibernation, and judgment, to my question here. That's the mode 'sleep'. Thanks for all who have comments/instructions USEFUL. Nice day
See the responses on this thread
If you want to manage the setting through the registry, you can paste the following text in Notepad and save to a .reg file and import or manually create the keys.
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\USB]
"DisableSelectiveSuspend" = DWORD: 00000001-Sumesh P - MSFT.
-
Dell XPS 13 stop during sleep after bios upgrade
Recently updated my BIOS Dell XPS 13 L321X-the worm 8. Since then, whenever I close the lid and put the laptop to sleep for several hours, the processor seems to come and the backstory is very hot. When the cover is opened, the screen remains blank and no wake mode 'sleep'. The only recourse is to make a hard stop with the power button and then restart. The laptop restarts then black screen troubleshooting, or select the normal startup of windows. Since then, I tried to update all the drivers, but still no luck. He continues to run hot and won't start after placing the phone in sleep mode.
Any help is appreciated!
Divider ~.
Thanks for the quick response!
To review, my problem started when I updated the BIOS to ver. A08. Before reading your solution, I ended up flashing my BIOS downgrade - worm. A07.
I started a series of applications and then closed the lid, let go in mode "Eve". After a long period of time, I opened the lid and the wake of the computer normally with no issue. No screen cases, no empty overheated. And not need a hard stop and restart with the power button.
Hope that this remains the case, I will record your steps suggested in case reports of problem, but so far, it seems that BIOS upgrade vA08 was the problem and a reflash with v A07 was the solution.
-
I installed the HP4620 wireless printer, now OSX you waking up from his sleep after about 15 minutes, it didn't happen until I installed the HP4620. So I opened a terminal and did a search for why the printer wakes up, the result was:
Wake up the reason: GLAN HDEF EHC2
I couldn't find any information about it, so I turned off and unplugged the printer, then turn on the computer sleep (which "now takes about a minute to sleep), now OSX wakes up after 45 minutes. So with the printer off and it's wake up yet, I think it must be something to do with the HP software installed?
Does anyone else have this problem? Any suggestions to correct sleep would be appreciated.
Thank you
Thanks for the reply but reset the SMC did not work, I have reinstaled 10.8.3 OSX then the printer and sleep works again. Forgot to mention, I am running a Hackintosh on a Gigabyte H77N-wifi Board but never had any problems with sleep or HP printers, it not was not up to what I have installed the HP4620 sleep has become is down with insomnia.
-
How to turn sound when switching mode sleep?
Hello
I got my 13 edge two days ago and have now installed all updates and upgrade the BIOS (how can this amount of updates it will take a new PC? Not surprised a lot of people have problems with their computers...)
But I can't find out how to make the boring 'BING' when the computer goes into sleep mode. Looked in system sounds and the Control Panel, but I can't. Ether in power options...
It's embarrassing during the day, but if she wakes up on LAN alert during the night I want it to be QUIET.
Everyone knows?
See you soon,.
johfo
Power Manager (Advanced mode)-> global settings-> power management options to
Uncheck "beep when power state changes.
-
How to re - enable automatic updates as an administrator?
On my machine, I have 3 users and I am the only administrator. I noticed last night that I didn't check for updates since March 1, 2010, and that automatic Upadtes is "disabled by the administrator.
Okay, all right. However, I'm unable to change the settings. The drop-down list to select the behavior of AU is grayed out & set to off. I checked the service and is has been started and set to automatic (delayed start).
Is there a registry entry, I'm missing? I didn't create a strategy group (AFAIK), but also do not know how to get that in Win 7 to check.
Any suggestions?
Thanks for responding.
I run AVG Free and he is current. It was a clean install - not an upgrade of the operating system preinstalled. Never had Norton or McAfee - too heavy on resources.
However, I found the source of the problem. My manufacturer had installed a kind of active management software that 'managed' my updates. I removed that and was able to change the setting again.
-
System of automatic starting Mode sleep
Vista Home Premium SP2 - system out of the Mode after a short period of time.
Maybe something here will give you a few clues:
TaurArian [MVP] 2005-2011 - Update Services
-
HOW TO GET RID OF THE MODE ADDRESS BAR IN FULL SCREEN WITHOUT MOVING THE MOUSE
When full screen toolbar address and tabs only lift and disappear after moving the mouse. It should automatically disappear after a few seconds, even if you do not move the mouse. Is there anyway to achieve this goal? Thank you.
Thanks for your reply. Safe mode made no difference. However, I know how you feel. If you are in normal mode (with a Web site open), and then you press F11 for full screen, it will automatically hide the address bar. However, if WHILE in FULLSCREEN MODE, you enter a new address and go to another Web page it will hide the address bar after moving the mouse.
-
We put the mode 'sleep', after 3-4mints that we are once again, sleep mode does not
Windows 7 Home Premium 64 bit,
When you click on SLEEP MODE, after 5mints we take again the laptop.
works do not laptop Reboot to start,.
Thanks for giving me something to Solutions.Thank you
RubyHi Ruby Singh,
I suggest you try the steps from the following link:
Windows 7 is not going to sleep
http://support.Microsoft.com/kb/976877See also: a computer that runs Windows 7 seems to sleep, but then he wakes up immediately
http://support.Microsoft.com/kb/972664Hope it will be useful. Incase if you still have any other queries please respond with more details and we will be happy to help you.
Maybe you are looking for
-
My shift key will not work help quickly
My shift key does not work and I do not really like that. Whenever I'm trying to do an emote it won't work as a simple smiley face now that I can do is; D, but im really D;. Help, please.
-
dfsvc.exe has stopped working
whenever I'm going to run an installer for the game client from curse for a game the dfsvc.exe error has stopped working. all said debugging is to install windows dates but ive that has already done and nothing again. tried to completely delete all f
-
How can I get the temperature on ASA55xx
Hi all Anyone know how I can read the temperature for the asa55xx. I need this for reasons in critical environments. concerning Klaus
-
Where is the best place to go to install the driver for printer hp 1320?
Where is the best site to get the printer drivers? I have a hp 1320 printer and cannot get it installed correctly.
-
Itineraries other nets will be lost when using the vpn client?
I have a very general question. I intend to implement a security solution for the extranet partners to connect to our intranet using VPN client. IPSec will close on the external interface of the Cisco PIX firewall v6.3. Now, my consirn is, I download