Dell XPS 13 stop during sleep after bios upgrade

Similar Questions

• MacBook Pro stops during sleep

  My MBP 15 "mid-2015 retina stop completely during sleep. Often when I get back to my MBP, I have to start from scratch because it stopped during sleep. There is no message in the log to indicate why it closed and no error messages or indications of kernel panic. Sometimes the power and battery and with or without the lid closed. Latest OS X with all updates applied.

  Reset the SMC (and NVRAM) does not help. Apple Diagnostics is no problem, and Genius Bar suggested I have first of all to make an OS X install excessive, then a clean install because they believe that it is a software problem. I tried to install too, and it made no difference. Pure install then, but I delayed, because it involves a lot of work in store again my work environment and data, it is not useless in current state - it's just a problem of waiting for the start up and then restore whatever, I was working on the last.

  Any advice?

  There is no message in the log to indicate why it closed.

  There could be.

  Wait until the Mac stops unexpectedly, and then check your system.log file to identify the numeric code associated with the stop. Read below.

  Locate the Console application - it is located in your utilities folder and looks like this

  

  You can find it by selecting utilities in the Finder go menu.

  Open the Console.

  If the list of newspapers on the left column is not already displayed, view journal list by selecting view list of newspapers on display menu of the Console.

  Locate system.log in the list, and then select it. Many date and time-stamped entries will appear, hundreds of them, and you need to find the relevant entries to your Mac problem.

  Do that type the word cause stop in the field filter on the top right of the Console window.

  Who will do all the log entries be hidden, except for entries that contain these words. There will be a numeric code associated with the entry of journal from «Cause of previous stop» What is this code?

• Meeting place for DELL Pro 8 - option missing sleep after updated

  I own a DELL Pro 8 meeting place. After updating drivers, the tablet will not sleep and pressing the power button is no longer in the Tablet 'SLEEP' mode.  SLEEP option is completely missing the Tablet remains on constantly even when not used.

  The updates that I applied are

  Pilot series Intel Atom Z3000

  Running reliable engine Driver Intel

  5570 WWAN and GNSS (GPS) Driver Wireless Dell Mobile Broadband

  I've found a workaround.

  I found that disable driver Wirless 5570 Mobile broadband device Windows re-activates the SLEEP feature Manager.  This would indicate that the problem is with the driver 5570 Wireless.  I tried to downgrade to a previous version of this driver, but Mobile broadband will completely stop working.

  I suppose that others have the same problem, if you have not applied the latest updates and a meeting place for Dell Pro 8 with a card 3G it would be a good idea to not update drivers at this time.

  In the end, I updated the Windows operating system files and installed A03.  Could not get A04 or A05 works not at all.

  It is clear that these updates have not been tested on the site of Dell Pro 8.  I highly recommend to avoid updating the driver for the card 3G until an adjustment for the driver of the object is released.

  The reality is that Dell has released a product with a digital pen that does not work properly and use a 3G card that does not work properly.  In general I would avoid Dell Windows tablets in the future, if you do not have to use Windows 8.1 I would recommend that you buy an Apple iPad.

  The iPad is a fantastic table.

• Dell XPS 15 SSD NVMe slow after updating the firmware July 2016 and papillonné CPU (Core i7)

  Edit: 9/2: title change intended to reflect issues of CPU throttling and discussion (second half of the thread)

  I noticed a huge performance drag after updating the firmware and drivers of my XPS 15 9550. The update took place August 4, 2016.

  Performance of my usual applications (Chrome, development tools and IDE, etc.) is dramatically lower. In general, I would say that things take about 3 times as long to arrive. I checked the CPU (normal), but also memory consumption (as normal) to discover that the problem is with the SSD drive.

  On this laptop: 500 GB NVMe thnsn5512gpu7 NV (toshiba). Attached are the results of a benchmark with AS SSD. All write speeds are appalling, to say the least... that explains a lot, but I have no idea how to solve this problem, and whether or not it really relates to the latest firmware + update drivers provided by Dell.

  (Note: I checked the BIOS, it seems that the SSD is currently configured in RAID mode.) Never touched this option before.)

  Any idea? Other affected users in a similar way. Thanks in advance.

  

  I managed to get the performance back by going to the properties of the disc and turn off windows write cache flushing heat. The two boxes should be checked. Write speed then went to about 1400 MB/s.

• Output HDMI not working not not for Dell XPS L502X does not work after upgrade to Windows 10

  Hi all

  Good so I have this laptop Dell XPS L502X that I bought in 2012. The laptop provided with Microsoft Windows 7 Home Edition.

  His output HDMI for my Sony LED used previously to work properly.

  But there are a few months that those offered by Microsoft, I upgraded my OS from Windows 7 Home edition to Windows Home Edition 10 laptop.  Since the upgrade, everything worked fine except I don't get HDMI output to my TV.

  I tried to search for solutions online but do not know what could be the problem? Can someone guide me in the right direction please?

  Thank you.

  I am happy to update this thread, the problem of my laptop screen is displayed using HDMI on my Sony TV, solved on its own with the last update for Windows 10 which includes the OS 1607 version build: 14393.187

  To all of you who always fights for the configuration of HDMI output for their laptop to the television after upgrade to Windows 10, I'm sure that the last Windows Update will solve the problem.

• HP 500-210qe: errors of HP Active health after BIOS upgrade

  In October, I made a BIOS upgrade using sp73062.exe to 80.21 A.  Since then, I have acquired a series of warnings in the application log:

  1. event ID 3; COM exception running a command GET Casl EmbeddedController.AuditLog.JSON = return value from the BIOS, which indicates a value of command not valid.: one or more arguments are invalid (Exception from HRESULT: 0 x 80000003)

  2. event ID 3; Exception COM runs a command EXECUTE Casl Diags.ThermalDiagnostics = return value from the BIOS indicating that a proposed BIOS admin password violates password BIOS. policy: Exception from HRESULT: 0 x 80000028

  3. event ID 204; BatteryCheck.exe did not return result of 0.

  4 event ID 203; Not supported by the ACEF

  At least one and that 14 of the foregoing have occurred daily since the upgrade.

  I can't: a) ignore these events, or b) go back to the previous version, or c)?

  The solution is to install one version of HP Support Assistant, other than the 8.1.40.3 version (such as downloaded in sp72974.exe) which does not have State errors.  So far there are no other version available on the HP download site. For now, I uninstalled the support Assistant.

• No amber light in the button walk / stop during sleep, now no blue light when Windows is running.

  The first took place several weeks after a mysterious ailment judgment then "standby mode". Last night, "closing Windows" hung for 10 minutes until that I forced the closure in holding the power button. Now, Windows loads and runs - but without the blue light in the power button.

  I would like to know why, how to fix it and - especially - if it's dangerous. I count on my computer for all of my business account.

  Any help will be greatly appreciated.

  Now, Windows loads and runs - but without the blue light in the power button.

  -> If Windows runs as it should then light is only an indicator of power. You're probably dealing with a faulty LED. Nothing to worry about.

  I count on my computer for all of my business account.

  -> It would be a case of all stored inside the computer records and no external backup? A big accident waiting to happen? If Yes, then this would be an ideal opportunity to review your backup strategy. How your business would suffer if you lost a value one day of data? Value of a week? The lot?

• Why BT stops during sleep

  I have a laptop of Win8.  I am trying to use a Blue Tooth (BT) mouse.  Everything goes fine until I close the lid for the evening preparing to take the computer into sleep mode.  When I wake it up the next day BT turns off.  I look at the menu of "turn wireless on or off" Win8 and find that the BT switch is disabled and grayed out.  I look in Device Manager and find that there is no entry of BT to the next level. the day before, he was there and in the control of windows to tab of the device power is unchecked.  I can reboot and everything is restored.  So, I lost the advantage of fashion "Eve".  What's wrong?  Which setting I'm missing?

  Hello

  Thank you for keeping us posted.

  It seems that you must register the Service of Support Bluetooth services.msc. You can go ahead and open the services as suggested in my previous post.

  I suggest you to remove any power management if you have currently created and re - set.

  Hope this information helps.

• Dell XPS 8500 does not start after the interruption of system restore

  It was one thing to do, but I turned off my PC during the restoration of the system because he took time to complete the process.  The next day I couldn't boot into windows.  I tried the automatic repair feature, but it does not work.  I tried to repair windows using the orignal installation disk, but it does not work.  I tried to install Windows 8 all over again, but I got an error message - media pilot is missing.  I opened the box uninstall the RAM, videocard unplugged and both drives and reinstall, but without success.  I noticed that there is an orange/orange light on the motherboard.  I thought it was the hard drive at the beginning, but now I hope that this is not the motherboard.  Any help will be appreciated.

  RB

  You have damaged the image beyond repair.  You need to reinstall from scratch.  Windows to say that an optical drive driver is missing, bad copy of DVD-RW, DVD + R or DVD - R media that was not burned at 1 X 2 X or 4 X, so is not readable.  This is why USB Flash Drive 16 GB or more is recommended rather than the DVD player to the installation media.

  Why doesn't my CD or DVD drive?

  Troubleshoot installation of Windows 7 Service Pack 1

  A required CD/DVD drive device driver is missing
  A media computer driver needs is missing
  error message when you install Windows

  https://support.Microsoft.com/en-us/KB/2755139

  This problem occurs for the following reasons:

  The installation DVD is removed during the installation process.
  A bad quality DVD has been used to create the installation DVD.
  The speed at which the installation DVD is burnt was too fast.
  The DVD drive cannot read media.
  The ISO file is corrupted.

• How to re-enable automatically stop mode "sleep" after a full recovery

  I had to do a full restore without back up and now I can't find Eve self-closing.

  I had to do a full restore without back up and now I can't find Eve self-closing.

  If you are referring to what you want your power button to be pressed, then right-click your ORB 'Start', select 'Properties' and click on the Startup tab. See power settings, click Start 'orb' and type 'Power'. Select the one that best matches the bet you try to change in the list.

• XPS 8700 does not start after the upgrade memory RAM

  Dear members of the Forum.

  I have a XPS 8700 with the following specifications:

  Core i7 4770 k

  2 TB HARD DRIVE

  16 GB of Ram (4 x 4 GB)

  NVidia GTX 660 (1.5 GB)

  BIOS version A10 (later).

  RAM sticks in my current system are all Micron Tech (here) 4 GB DDR3 SDRAM PC3 12800 240pin 1.5V 1600 MT/s.

  I had two RAM modules of tech Micron (here) 8 GB DDR3 SDRAM PC3 12800 240pin 1.5V 1600 MT/s so that I can move on to a total of 24 GB.

  After the discussion here and here, I installed the modules in slots 1 & 2 (both white) so that the system is not able to start. Not even got the bios screen. I also tried 3 & 4 configuration (both black) I ran my computer with the two 8 GB sticks only, with the same unfortunate results.

  I also saw that it is a normal problem of compatibility problems between the types of ram, but I consider that this is not the case. In addition, bad positioning of the modules is not also the case because if I put my old ram glue the computer starts normally.

  I used tape you will static isolation.

  Is the problem, a problem of compatibility between my computer and the RAM modules?

  If the RAM is damaged does these effects (do not start)?

  How can I check if the RAM modules are damaged?

  What would be your suggestions?

  I thank very you much in advance!

  Mauricio

  Hmm, I'd say you two bad sticks of RAM.  If the system POST even with them, I would swap them if you can.  We know that the RAM slots work because you have 4 x 4 sticks without any problem and your computer can take up to 32 GB of RAM.  Your admission that you bought the right kind of RAM, voltage, and speed, etc., so that shouldn't be a problem.  I would say as bad RAM.  When you do not install, just check that you make pairs in each of the colored slots, for example. matching pairs in the slot of white and black.

• HP Mini 210: Palm Desktop (see 6.2.2) lost address book during and after the upgrade to Windows from December 10

  The problem is not with the HP Mini. This computer is running Windows 7 Starter and he Hotsyncs perfectly with my Tungsten C handheld. The problem is with a Dell Vostro, but because it is a problem of Palm, I hope you can help.

  My Dell Vostro has been upgraded to Windows 10 in September. I had a few problem get the Palm to synchronize at this time, but I thought her and successfully synched bases Memo, address and the Date of all the way up to 10 Windows update that Microsoft pushed around Christmas.

  The first Hot Sync attempt after the update given my address book disappear from desktop ONLY (running version 6.2.2) and I was not able to find a way to restore the address book on the desk.

  Handheld still works fine. As I said the HotSync with the HP Netbook (Windows 7 Starter Edition) and I would like to continue to use it as long as ITO still works.

  Try using the Import/Export built-in in Palm Desktop.

  On the PC that contains the data, go to File/Export (while the address book is open and being viewed).  This will produce a file that you can copy to the Dell PC.  Use a flash drive, Cloud Computing service, card SD - it doesn't matter.

  On the Dell, go to file/import and locate the file.

  Windows 10 has caused some 'quirks' to appear in Palm Desktop.  We learn that we will!

  WyreNut

• Problem keys NB100 after BIOS upgrade

  Hello

  After I updated the bios to version 1.60 than some quick keys, such as the brightness setting (fn + f9/f10) or the 'secret' (fn + f6) don't work anymore when the operating system starts, they work rather before loading the operating system. I use Windows Vista atm. I tried to reinstall too, but nothing has changed.
  I really hope to receive some help then thanks in advance ;)

  Best regards

  What have you tried to reinstall?
  Which utility?

• The Magic Trackpad stopped working properly after the upgrade

  Hello. I tried to solve a problem with my magic trackpad for two weeks now, and I'm running out of ideas, so I thought I'd see if anyone has any. I have a Macbook Pro 2011 who bought second-hand, and the trackpad has never worked properly in this respect, he was always nervous. Fortunately, I wanted to use my magic trackpad with her anyway and have done so since then. I had problems over the years where he selects or done some weird things, but I just had to press the power button / stop, then esc to get back to work. However, now, I have a serious question that I can't solve since I've upgraded to the latest version of El Capitan.

  Now the magic trackpad and the laptop trackpad work very well at the start, but when my Mac wakes up from sleep, I can no longer tap or 'left click' on the magic trackpad, or the built-in trackpad. I can't select the programs or click on anything whatsoever. The only way to get my mac works again is to switch off the magic trackpad, and that integrated then starts working again. I can't simply turn the other back a new if, it does the same thing again until I turn it off.

  I tried the following and had no change:

  -Removal of all bluetooth devices and add the trackpad again

  -Deleting files plist bluetooth

  -Reset the SMC

  -Reset the PRAM

  -Turn off bluetooth devices in addition to the macbook

  -Disconnect the magsafe adapter

  Someone at - it any other suggestions?

  Thanks in advance

  Hello scarlette,.

  Thank you for using communities of Apple Support.

  I see that your Magic Trackpad is upward. The following article provides the steps necessary to resolve the devices wireless on your Mac.

  If your Apple wireless mouse, keyboard or trackpad doesn't work as expected

  Best regards.

• HP Pavilion 17: keyboard problem after BIOS upgrade

  This isn't a terribly troubling problem, but I will mention it if HP is the reform of systems of thought from these forums.  I recently downloaded and applied the update of the BIOS HP with HP Support Assistant.  After, my keyboard does not work on the login screen Windows 10.

  I connect using a PIN code but can no longer enter the PIN code using the keyboard.  The figures of the 'line' number work very well, however, and as soon as I'm connected, the keyboard works normally.

  And, Yes, I have switched Num Lock

  Plug the power adapter.

  Press the power button and then press the ESC key.

  Now, press the F2 key to enter the interface of PC Hardware Diagnostics UEFI.

  

  Select the Firmware management

  At the next screen, choose BIOS Rollback.