How to read and understand the information in the event logs

Similar Questions

• Error message: problem loading parameters and check the event log or ask the administrator

  My wallpaper, the desktop icons and most of my documents are gone.

  I have Vista Home Premium and a couple of days and I connected my desktop background was changed. Several desktop icons are missing, and a message came up saying there was a problem loading my settings and check the event log, or ask the administrator (me) for more details. All my "Favorites" were missing in the sidebar and my documents and recorded images folders are empty. Microsoft customer service tells me there is an error in my code for the identification of product (from the Windows Activation in systems and Maintenance) so I can't help out.

  Any thoughts? Thank you!

  Hello, G25

  It is likely that your user profile is damaged. I would advise to create a new user account and test if you get any errors. If everything works as expected under the new user account, you can start to recover your account profile by following the steps on the following link: difficulty of a user profile is corrupted

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cant't save and clear the event logs to a folder on the hard disk

  I have a new hp laptop under windows7. When I try to erase and save the event logs to a folder on the hard drive, I get a message saying that it cannot save the file to the network location despite the fact that I'm not saving to a network location.  I can record the events first and then to clear the logs.  But can not use the option "save and clear."  What could cause this problem?

  Hello

  1 when was the last time save and clear option has worked?
  2 have you made any changes to the computer before the show?

  Run the System File Checker and check if it helps.

  Follow the steps in this link: http://support.microsoft.com/kb/929833

• How do I know that the event log are reported to any server

  Hello

  I can see all the event logs and error logs using the event viewer. But I want to know if newspapers are reported to some server just we report about a bug or non-response to application/software using the reporting window.
  I want to check if the event errors are reported on some server or not, if yes, to which server it is reported. Is this possible?
  The observer of events, or any application in the windows operating system keeps track of these reported error logs.
  Thank you
  Pankaj

  Hello

  As mentioned by Palcouk, Event Viewer records all events and activities on your computer but does not send it to any server. The call you have received is wrong / will call that could come from a potential hacker.

  I suggest that you go through the items listed below.

  http://www.Microsoft.com/security/online-privacy/prevent.aspx

  http://www.Microsoft.com/privacy/default.aspx

  http://privacy.Microsoft.com/en-in/fullnotice.mspx

  http://www.Microsoft.com/security/online-privacy/overview.aspx

  I hope that helps!

• How to read and display the .ai file in CS4 SDK?

  Hi all

  I drew an own and saved the socument as file traingle.ai.

  Now, I want to read/open the traingle.ai file in the plugin.

  [Lets say, I want to read this file based on GoFilter ()]

  Is there an API to read file .ai in CS4 SDK? and display as well?

  If you mean autonomous (outside Illustrator) the answer is no. The SDK is reserved for the plugins loaded into Illustrator. If you want to open a file from Illustrator that is perfectly doable if. I think that AIDocumentList:: open() that will handle.

• BlackBerry smartphones helps understand the event log created by JL_Cmder 1.9.3

  Hello

  I get an error screen when I start my BB (bold 9700) saying: error 102 JVM

  I have used JL_cmder 1.9.3 to extract the boot log, but I do not understand...

  Could someone décrypte for me?

  Here is the log:

  Hello Boomer!

  Thanks for your reply.

  I think I should have tried to follow the procedure here.

  And, in my case, try to delete the file net_rim_crypto_cms.cod.

  I have not tried if I understood during the reinstallation of the BB OS net_rim_crypto_cms appear to be associated .cod files.

  In my case, the error as soon as I restarted my BB; the company I was working for that cancelled my subscription. First of all, I had no network and after a reboot I got the error.

  Maybe this will help you to others...

  And the usual thing: back up your data!

  See you soon,.

• Please read and understand the following question: When can I find pictures of screen shots of Vista ([i.e. the file where are stored the images])

  I need to see the image of screenshot of Vista.  Don't want to take them or save them or print them.  I don't have Vista.

  http://www.bing.com/
  http://www.Google.com/

  Go ahead!

• How to permanently remove it from the event log in the CSA MC

  I run the Cisco Secure Agent 4 deployed on 4 PCs I have enabled documented logging just because it's a test environment & I wanted to see how many events it would generate. Well, last I checked CSA MC (under summary of events) it has more than 300,000 (it's just 300 000) events recorded. I have modified the event handler and applied the new rules, but the machine™ is slooooow both because of more than 300,000 events. Please see the screenshot joint. How do I permanently purge the event log. I used the purge within the CSA MC command but it removed only 10,000 events. The machine is slow so that I can do nothing about it.

  Well, I wanted to send the screenshot, but the machine is slow I can't even attach the file. But in all cases, the problem is that the window summary displays message of more than 300,000 events & I need for permannently remove events.

  Thank you.

  Was the only one I know how is to use "events" and click all events. From there, you can click or purge the events of your choice.

  Also, what are the specifications of server you use?

  I have been involved with MCs with more than 2 x what you have & this server is satisfactory product.

  Hope this helps,

  Peter

• Hi, I want to know how to extract and save the text highlighted on Acrobat Reader.

  Hi, I want to know how to extract and save the text highlighted on Acrobat Reader.

  Hi Eli Marto,

  I'm sorry, but it is not possible to extract text from a PDF file using the player.

  It can be done using Adobe Acrobat.

  Ref: export the comments AND highlighted text?

  Kind regards

  Ana Maria

• I get the message saying launch adobe reader and accept the license agreement for end. How can I do this

  I get the message saying launch adobe reader and accept the license agreement for end. How can I do this

  : Windows in C/Program Files (x 86) /Adobe/Reader11.0/Reader and doiuble click on the file eula.exe .

  Mac: Go to Mac HD/Applications and double-click the Adobe Reader.app

• How to read continuously from the rs232?

  Hello

  I'm new to LabVIEW and my questions would be obvious for some for you. So please help if you know the solution.

  It's for my school project. For your information, we need to schedule a Committee of Altera DE2 to control traffic lights (something like that) and at the same time, the Commission shall forward the States of enlightenment to a computer with LabVIEW installed via an RS-232 cable.

  The rest of the project was fine except for the part of LabVIEW, because as I said earlier, I'm new to LabVIEW.

  We use the "basic series write and Read.vi" in the folder examples of NEITHER. The problem is that we do not know how to change the vi in order to receive the data that come the DE2 Board permanently. Each time, the vi stops reading after receiving 24 bytes of data.

  So, the first question is:
  1.) how to read continuously from the RS-232 port? (We tried to use while "loop" but without success, maybe we were doing it the wrong way.) If you know the solution, please enlighten us for us in a detailed manner.

  (2) Secondly, once we have received the 'chain', how can convert us to bits (0 and 1) so that we might be able to manipulate the bits, for example turn on the LEDs that correspond to the bits.

  Thank you.

  Instead of reading the bytes of the port so to read that many bytes (which may be zero), just do a VISA read for 1 byte.  He will wait for this next byte.

  To get an array of Boolean out of this byte, use this code.  He turns the characters into a byte array.  Takes the first and the only element of this array, and then converts this single U8 number into an array of bytes.

  

  Which country are you?  I've never seen or heard lights orange before.  Only the yellow lights.

• How to compile and install the kernel modules after nation and nipalk for installation of Gentoo 64 bit?

  We are trying to install a PCIe 6251 DAQ card in a box of Gentoo 64 bit running Linux kernel 2.6.28 - gentoo-r5 4.3.2 - gcc and glibc - 2.8.  We have installed RPM utilities to manage the installation.  The current problem is that we are not able to compile and install the kernel modules: nidmxfk, nimsdrk, nimstsk and nipxirmk.  Here's a summary of what we have done so far, and to what extent we got.

  First of all, we have changed the configuration of the kernel that we could export the init_mm unused symbol by changing the configuration option of the CONFIG_UNUSED_SYMBOLS = o kernel and recompile the kernel.  Then we installed LabView 8.6.1.  Then we ran the nation 1.9 installer who has installed the source code in vain on the compilation.  To resolve this problem, we have changed the function of pte_offset to pte_offset_kernel by editing the file/usr/local/natinst/nation/configures following the instructions here:

  http://decibel.NI.com/content/docs/doc-4511

  We were then able to compile and install the kernel nation module thanks to:

  . / configure
  do
  make install

  lsmod said that nation has been properly installed.  Then we ran the installer for DAQmx 8.0.1 by:

  . / INSTALL - nodeps

  To do this, we have received errors indicating that LabView support could not be installed because check addictive (incorrectly we think) stated that labviewbase86 has not been installed; This caused the installer to have an abortion.  Therefore, we refused to install support for LabView 8.6 and revived the installation program which produces the output:

  Installation of the driver NOR-DAQmx Distribution of Linux Installer version 8.0.1f0...

  Already to jump Edward - 1.9.0 - f0.noarch.rpm installation, same or newer
  installed.

  Pre Installation...

  Preparing... ########################################### [100%]
  1:nitimingi ########################################### [ 4%]
  2:nipalki ########################################### [ 7%]
  3:nipali ########################################### [ 11%]
  RC0.d directory not found, startup script is not accredited with init levels.
  4:labview80 - rte # [14%]
  5:ni653x ########################################### [ 18%]
  6:nicdigi ########################################### [ 21%]
  7:nidaqmxcapiexmp # [25%]
  8:nidaqmxcapihelp # [29%]
  9:nidaqmxcapii # [32%]
  LN: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory
  10:nidaqmxcfgi # [36%]
  11:nidaqmxef # [39%]
  12:nidaqmxhelp # [43%]
  13:nidaqmxinfi # [46%]
  14:nidaqmxswitch # [50%]
  15:nidimi ########################################### [ 54%]
  16:nidsai ########################################### [ 57%]
  17:nimdbgi ########################################### [ 61%]
  18:nimioi ########################################### [ 64%]
  19:nimru2i ########################################### [ 68%]
  20:nimxdfi ########################################### [ 71%]
  21:nimxpi ########################################### [ 75%]
  22:nimxs ########################################### [ 79%]
  RC0.d directory not found, startup script is not accredited with init levels.
  23:niorbi ########################################### [ 82%]
  24:nipxirmi ########################################### [ 86%]
  25:nirpci ########################################### [ 89%]
  26:niscarabmm # [93%]
  27:niscxi ########################################### [ 96%]
  28:nistci ########################################### [100%]

  After Installation...

  At this point, after reading this report, we used the Gentoo rc update utility to add several scripts for the boot runlevel initialisation:

  update of RC - a boot nipple
  update of RC - a bunch of nipxirmu
  update of RC - a bunch of mxssvr
  update of RC - a bunch of nisvcloc
  update of RC - a bunch of nidevldu

  When the computer reboots, you get an error message indicating that the following kernel modules are not: nidmxfk, nimsdrk, nimstsk and nipxirmk.  lsmod shows that the nation and nipalk are installed, but no other kernel modules NOR are present.  modprobe-l shows that only nation and nipalk are available.

  So we have several questions:

  1. we install drivers in the correct order?  Should use us NI-VISA 4.5 or NOR-488. 2 rather than DAQmx 8.0.1?

  2. What kernel modules should be loaded for this equipment run?  How to compile and install the ones that we have yet, specifically nidmxfk, nimsdrk, nimstsk and nipxirmk?  Are there others?

  3. How can we get the installer to properly recognize that we have installed LabView Core and install support for LabView?  Are there additional kernel modules related to the support of LabView?

  4. What is the symbolic link that was not created in the DAQmx installation report? (ln: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory)?

  I apologize for so many questions, but these seem to be the last obstacles to obtaining OR runs correctly on this system.  Is there other information that we can provide that would be useful?  Thanks for any help or suggestions you can offer.

  Craig

  Hey Craig,.

  Given that you use 64-bit Linux all kernel modules must be compiled for 64 - bit.  User mode binaries can be 32-bit, assuming that you have installed the 32-bit support libraries.

  NOR-DAQmx is a complex architecture and requires several kernel modules to support your PCIe card.  Most of these kernel modules have not been brought to support 64-bit Linux.  Some kernel modules are components infrustructure that are shared with other pilots OR as NI-VISA and NOR-488. 2 and have been brought to support 64-bit Linux.  Unfortunately, you need all the modules to use your hardware.

  I hope that answers your question.

  Shawn Bohrer

  National Instruments

• A snapshot could not be created. Check the event logs "VSS" and "SPP" application for more information

  Original title: a snapshot could not be created. Check the event logs "VSS" and "SPP" application for more information. Details: shadow enough storage to create the copy storage file or other shadow copy data. Error code: 0 x 81000019

  I tried to back up my files using an external hard drive (which I have done before with Windows 7 64-bit), but recently I get the same error code. I have re-formatted external hard drive, run diagnostics on it, restarted the computer, etc and nothing seems to work. I also tried both options posted in another forum with the same error and too, they were not successful (external is already NTFS and now that it has been re-formatted is completely empty). Windows has more suggests? I hope not to have to use drag and drop my files whenever I want to save my computer.

  Thanks for the help!

  Read this article because I believe that the amount of free space in the 100 MB partition is too small. Article is a different error code, but the technique to increase the size of the 100 MB partition is the same.

  Note: Backup of your hard drive as described in the article.

  How to fix error code: 0 x 81000033
  http://www.PAGESTART.com/win7br0x8100003301.html

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• How to read data from the unit to acquire data with LabVIEW

  Hello everyone, I'm new with LabVIEW and I need help. How to build LabVIEW program to read and store the data acquisition unit temperature data. the data can be any store such as Excel or a text file? Thank you.

  Start passing by examples of LabVIEW.  Go to help-> find examples.  There are several examples here just for the analog input and then even more for logging data to a file.  After that, show us what you have and we can guide you a little better that way.

• How to read and display a my a miccrontroller (MCB1700) on labview signal connected via a port on a PXI machine CAN

  How to read and display a my a miccrontroller (MCB1700) on labview signal connected via a port on a machine PXI CAN?

  I tried using a DAQ Assistant, but the port is not included as one of the physical channels supported, even if all his drivers are up to date.

  Help, please...

  Thank you.

  If you can read it in MAX, then you should be able to run the NI CAN example.

  Help-> find examples

  Find the CAN and watch CAN Receive.vi.

  Basically, set up the network, open the object, read in a loop close object when it is done.

  If you have any questions about the example, go ahead and post your vi and we can work from there.