How to read and write a text file to the folder of the user preferences?

Similar Questions

• How to read and write files .exe to soa using the file adapter?

  Hello

  I have a requirement, that I need to read and write files .exe to soa using the file adapter.

  Can someone help me.

  Thanks in advance,

  Divya.

  Hi Vijay,

  I tried with opaque. It works for me.

  Kind regards

  Adkins

• How to read and write attributes using the API?

  I'm trying attributes of access (read and write) of the following:

  SequenceFile

  Sequence

  The sequence steps

  When you look at the documentation of the API, TestStand, the following functions are available:

  PropertyObject

  Properties

  Attributes (read-only)

  HasAttributes (read-only)

  Methods

  DisplayAttributesDialog

  I tried to use the SetValString and GetValString commands using the reference of the attributes, but it does not seem that the data is stored in the file.

  I can't find the following information in the TestStand API:

  1. Where the attributes are stored in a property object?
  
  
  2. How can we access through the API?

  No advice and no information is appreciated!

  You must increment the number of changes to the file after that editing the sequence editor (or UI) won't refresh or mark the file, as amended. Use sequenceFile.AsPropertyObjectFile (). IncChangeCount().

  SequenceFile attributes are stored in the SequenceFile.Data, not the object of SequenceFile object. You can change them in the Advanced tab of the properties of the file sequence dialog box.

  Hope this helps,

  -Doug

• How to read and write FileGlobals with TestStand ActiveX control in c#

  Hello everyone,

  I'm trying to read and write FileGlobals with TestStand ActiveX control in c#.

  I tried with:

  SequenceContext contextOfTraceMsg = e.thrd.GetSequenceContext (0, out frameId);

  var filepara = contextOfTraceMsg.FileGlobals.GetSubProperties ("ProjectParameter.NestIsTested", 0). GetValue (1); (NestIsTested is an array of Boolean)

  but without success.

  Can someone tell me how to do it right?

  Thank you in advance!

  Concerning

  0049 wrote:

  Hello Doug,

  Thanks for the reply.

  It works to read a Boolean value. How to read the table of Boolean?

  Kind regards

  For a table you can either do:

  (1) myarray [] bool = contextOfTraceMsg.FileGlobals.GetValVariant ("myarray", 0);

  Or

  (2) using GetNumElements() and GetValBooleanByOffset().

  -Doug

• How to build and publish webhelp html files in another folder than the default folder

  Hi all

  I'm new to using robo. I have a requirement to build and publish webhelp html files in a different folder from the default folder.

  Could someone tell me please the steps to change the folder

  Thank you

  Rashmi

  You change the name in the first field in the first page of the wizard and the file to generate. It must be a folder on your hard drive.

  You change the publication record in the last page of the wizard. Wherever you want to.

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• Need help: UTL_FILE read and write in the text file

  Hello, I'm on version 11 GR 2 by using the UTL_FILE function to read a text file and then write the lines where it starts with the word "foo" and put an end to my writing in the text file where the line with the word "ZEN". Now I have several lines that begin with 'foo' and 'ZEN' allow a paragraph, and in this paragraph, there is a line that begins with "DE4.2". Therefore,.
  I need to write all of the paragraphs that include the "DE4.2" line in their beginning and end of lines 'foo' and 'ZEN '.
  
  FOR EXAMPLE:
  
  FOO/234E53LLID
  IT'S MY SECOND LINE
  IT'S MY THIRD LINE
  DE4.2 IT OF MY FOURTH LINE
  IT'S MY FIFTH LINE
  ZEN/DING3434343
  
  FOO/234E53LLID
  IT'S MY SECOND LINE
  IT'S MY THIRD LINE
  IT'S MY FIFTH LINE
  ZEN/DING3434343
  
  I'm only interested in writing the first paragraph tha includes line DE4.2 in one of the paragraph of lines not the second ther that does not include the "DE4.2".
  
  Here is my code so far:
  
  CREATE OR REPLACE PROCEDURE my_app2 IS
  Utl_file.file_type INFILE;
  outfile utl_file.file_type;
  buffer VARCHAR2 (30000);
  b_paragraph_started BOOLEAN: = FALSE; -flag to indicate which required paragraph is started
  
  BEGIN
  -Open a file to read
  INFILE: = utl_file.fopen ('TEST_DIR', 'mytst.txt', 'r');
  -Opens a file for writing
  outfile: = utl_file.fopen ('TEST_DIR', "Out.txt", "w");
  
  -Check the file is open
  IF utl_file.is_open (infile)
  THEN
  -lines in the file in loop
  LOOP
  BEGIN
  UTL_FILE.get_line (infile, buffer);
  APPLICATION STARTING POINT-
  Buffer IF LIKE 'foo %' THEN
  b_paragraph_started: = TRUE;
  END IF;
  -SEARCH FOR GRADS APPS
  IF b_paragraph_started AND buffering LIKE '% 4% ' THEN
  UTL_FILE.put_line (outfile, buffer, FALSE);
  END IF;
  -REQUEST FOR ENDPOINT
  Buffer IF LIKE '% ZEN' THEN
  b_paragraph_started: = FALSE;
  END IF;
  UTL_FILE.fflush (outfile);
  
  EXCEPTION
  WHEN no_data_found THEN
  EXIT;
  END;
  END LOOP;
  END IF;
  UTL_FILE.fclose (INFILE);
  UTL_FILE.fclose (outfile);
  EXCEPTION
  WHILE OTHERS THEN
  raise_application_error ("-20099, ' UTL_FILE unknown error");
  END my_app2;
  /
  
  When I run this code I get only one line: DE4.2 it ME LACK THE WHOLE PARAGRAPH
  
  PLEASE ADVISE...

  I agree with reservations of Justin on the length of a "paragraph" and the number of users that are running at the same time, so here is a version without the collections.

  CREATE or replace PROCEDURE my_app2 IS
     infile utl_file.file_type;
     outfile utl_file.file_type;
     buffer VARCHAR2(30000);
     b_paragraph_started BOOLEAN := FALSE; -- flag to indicate that required paragraph is started
     b_toprint BOOLEAN := FALSE;
     l_para_start pls_integer;  -- start of "paragraph"
  BEGIN
     infile := utl_file.fopen('TEST_DIR', 'mytst.txt', 'r');
     outfile := utl_file.fopen('TEST_DIR', 'out.txt', 'w');
     LOOP
        BEGIN
           utl_file.get_line(infile, buffer);
           IF buffer LIKE 'FOO%' THEN
              b_paragraph_started := TRUE;
              l_para_start := UTL_FILE.FGETPOS(infile) - (length(buffer) + 1);
           END IF;
           IF b_paragraph_started and buffer like '%DE4%' THEN
              b_toprint := TRUE;
           END IF;
           If buffer like 'ZEN%' THEN
              IF b_toprint THEN
                 UTL_FILE.FSEEK(infile, l_para_start);
                 utl_file.get_line(infile, buffer);
                 while buffer not like 'ZEN%' loop
                    utl_file.put_line(outfile,buffer, FALSE);
                    utl_file.get_line(infile, buffer);
                 end loop;
                 utl_file.put_line(outfile,buffer, FALSE);
              end if;
              b_paragraph_started := FALSE;
              b_toprint := false;
              utl_file.fflush(outfile);
           end if;
        EXCEPTION
           WHEN no_data_found THEN
              EXIT;
           END;
     END LOOP;
     utl_file.fclose(infile);
     utl_file.fclose(outfile);
  END my_app2;
  

  Test:

  SQL> !cat mytst.txt
  FOO/234E53LLID
  THIS IS MY SECOND LINE
  THIS IS MY THIRD LINE
  DE4.2 THIS IS MY FOURTH LINE
  THIS IS MY FIFTH LINE
  ZEN/DING3434343
  
  FOO/234E53LLID
  THIS IS MY SECOND LINE
  THIS IS MY THIRD LINE
  THIS IS MY FIFTH LINE
  ZEN/DING3434343
  
  FOO/234E53LLID again
  THIS IS MY second SECOND LINE
  THIS IS MY second THIRD LINE
  DE4.2 THIS IS MY second FOURTH LINE
  THIS IS MY second FIFTH LINE
  ZEN/DING3434343 again
  
  SQL> exec my_app2;
  
  PL/SQL procedure successfully completed.
  
  SQL> !cat out.txt
  FOO/234E53LLID
  THIS IS MY SECOND LINE
  THIS IS MY THIRD LINE
  DE4.2 THIS IS MY FOURTH LINE
  THIS IS MY FIFTH LINE
  ZEN/DING3434343
  FOO/234E53LLID again
  THIS IS MY second SECOND LINE
  THIS IS MY second THIRD LINE
  DE4.2 THIS IS MY second FOURTH LINE
  THIS IS MY second FIFTH LINE
  ZEN/DING3434343 again
  

  You may need to change the length (buffer) + 1 depending on your platform and if you want a blank line s NLE out paragraphs, add another call to put_line after that outside of the loop in the fi l_toprint block.

  John

• How to open all the text files in a folder at a time so that they cross my VI in good order and the VI should only be run once per file?

  Hello

  I am currently looking to browse hundreds of text files my VI to run the VI once and having labview to open each text file in the order numberical that are contained in a single folder.

  In general, I ran each file one at a time through the VI, hours to browse all text files. I'm wondering if there is a way I can specify a target folder and then open each text file in the target folder and walked through my VI in numberical order (each file is located in the order that is MM_01, MM_02, MM_03...). Currently I open a file at the same time, through "the spreadsheet read", then the index table, and then run through filters etc to get the data I need. I hope there is a way to do it, because he will save days of work.

  Thanks in advance for your help.

  

• How can I hide the page thumbnails navigation bar initially to the top of Adobe Reader and open a pdf file?

  How can I hide the page thumbnails navigation bar initially to the top of Adobe Reader and open a pdf file? I couldn't find this option on the Preferences tab? Thank you

  Under Edit - Prefs. - Documents check the box that says "Restore last display settings when reopening documents." Hide the Pages panel manually, and the next time that you open the file it should have disappeared.

• I read and write English but my husband reads and writes in Russian. How can I activate the taskbar of the Russian language?

  My husband is from the Russia.  It reads and writes in Russian and I'm having a problem turning on the Russian keyboard.  I went many steps of the menu start, Control Panel, regional and language options, languages, details.  I added the Russian.  under the Russia, there is a symble of a keyboard than Russian (typewriter) Russia and the United States.  acorrdign at every stage, there should be a tab in the bar of tasks showing that I can switch bewteen eglish and Russian.  who does not come to the top.  I have check the tab bar of language and made sure all the boxes are ticked, but I still can't find the language bar. what I am doing wrong?

  I don't need a translator who is the other thing that I still find.  I need for my husband who bought the computer to be able to type in Russian, his mother tongue.

  Thank you for your time,

  Heather

  See if that helps you

  http://Office.Microsoft.com/en-GB/Outlook-help/switch-between-different-languages-by-using-the-language-bar-HA010362283.aspx

• Lsass.exe on Vista constantly reads and writes three times. How can I stop this please?

  After starting calm down.  Task Manager indicates that LASS. EXE continuously reads and writes.  It shows three readings and three written a couple of times per second.  The readings are still 204 bytes and the writing are always 132 bytes.  This action stops.

  I searched the web for answers and tried all the suggestions and nothing worked.

  Any ideas please?

  Hello

  I suggest you go through the link that talks about a similar problem.

  http://social.technet.Microsoft.com/forums/en-us/itprovistasecurity/thread/03638144-f4da-4349-B246-a27ec3727e70

  You can also post your question to:

  http://social.technet.Microsoft.com/forums/en-us/itprovistasecurity

• Simple BPM with file read and write immediately to new file

  Hello
  
  I am trying to create a very simple process of BPM, with reading a file which is simply written again.
  For this I use a "task receive" calling the task of reading and a "service mission" to call the writing task.
  
  The composite.xml generated for the son looks like this:
  
  < component name = 'Process' >
  < implementation.bpmn src="processes/Process.bpmn"/ >
  < / component >
  < name of reference = "WriteFile" ui:wsdlLocation = "WriteFile.wsdl" >
  < interface.wsdl interface = "http://xmlns.oracle.com/pcbpel/adapter/file/Playground/Project1/WriteFile#wsdl.interface (Write_ptt)" / >
  < binding.jca config = "WriteFile_file.jca" / >
  < / reference >
  <>wire
  < source.uri > < source.uri > Process/Services.Externals.WriteFile.reference
  < target.uri > < target.uri > WriteFile
  < / thread >
  "BOLD"
  <>wire
  < source.uri > < source.uri > Process/References.Externals.ReadFile.service
  < target.uri > < target.uri > ReadFile
  < / thread >
  "BOLD"
  <>wire
  < source.uri > < source.uri > ReadFile
  < target.uri > < target.uri > Process/References.Externals.ReadFile.service
  < / thread >
  < / composite >
  
  When you try to deploy an error message is generated:
  Error (33,17): could not find the reference name 'References.Externals.ReadFile.service' in the 'Process' component for thread definition
  
  for the code shown above to
  <>wire
  < source.uri > < source.uri > Process/References.Externals.ReadFile.service
  < target.uri > < target.uri > ReadFile
  < / thread >
  
  Once I have remove this part of the process is ok and runs as expected.
  
  As it is generated code and I did nothing on the wiring, could someone tell me what I'm doing wrong?
  
  If you need additional information, please let me know.
  
  Thank you and best regards,
  ISA

  I see nothing wrong here...

  without doubt, recreating the process and I feel you should nt get that again...

  Sharma

• Writes a text file from a network computer to another computer on the network.

  It is possible to write a text file from a computer on the network to another computer on the network through labview without using FTP?

  Hi bebo_lm,

  It depends on how they are connected. If you have a 'normal' access to the pc and you can write on a hard drive of the other computer, you can use the writing functions of files or the copy of the file. If they are not connected like this, then you need another service. Why you do not use FTP?

  Mike

• Read and write data to the content repository.

  Hi all
  We use the content repository to store a document and images on the web server in the Center.
  So we have created/setup a repository of content on the web center.
  Please proivde me some might document page to get an idea of how I can read and write the date
  content repository.
  You are most welocme to provide some idea /suggestion.
  Thank you
  Arun.

  You are using webcenter spaces or you create a custom application webcenter?

  When you create a custom application webcenter, you can make use of the workflow Documents. Jdeveloper resources catalog, you will find a few flows of Documents job that will allow you to add some components to manage documents in a folder structure.
  You must first create a connection to your content from your application server. This can be done in the Application resources, right-click on the connection and in the context menu, select "content repository". Them you must filll in connection to your content server details. Make sure you have selected "Set as primary connection for document service" because otherwise the document taskflows you deposit on your page will not find a connection.

  Once you have added the connection, you will also find a datacontrol to the content repository. In this way, you can use the datacontrol place the taskflow and you can create several custom tables.
  I'm not sure but I think the datacontrol also include surgery to create the document but I'm not sure...

  And if not enough, you can always do use the webservices provided by content server. In Jdeveloper you can easily create a datacontrol from Web services by providing the wsdl file. UCM provides for services so that you can import the wsdl into your application and you can easily create your own forms checkin, tables...

  Here is some information on how to integrate services document:
  http://sqltech.CL/doc/oas11gR1/WebCenter.1111/e10148/jpsdg_doc_lib.htm

  and here are some others:
  http://sqltech.CL/doc/oas11gR1/WebCenter.1111/e10148/jpsdg_content.htm#BABCCFJH
  http://sqltech.CL/doc/oas11gR1/WebCenter.1111/e10149/documents.htm#WCSUG2635
  http://sqltech.CL/doc/oas11gR1/WebCenter.1111/e12405/wcadm_documents.htm#WCADM205

  Published by: Yannick Ongena on Oct 8, 2010 08:23

• Satellite M30X-165: Mat * a UJ - 831 S is not read and write any DVD

  Hello

  the next problem is sticky on the laptop Satellite M30X 165 with the burner Mat * a UJ - 831 S: it can read and write CDs, but is not able to write them to DVD or even read some of the ones I've burned and also read in the same drive. Even at the start of the DVD, it does not start from the recovery DVD, the player starts and slows down very quickly.
  Without doubt, it must be put at the service of repair or someone has other suggestions?

  Could you please tell me how long the repair takes (I know what it takes to install the desktop temporarily used).

  Thank you

  Post edited by: DerSeher
  Using burning software, it detects the DVD, but invite you to an "error of calibration power (037303).

  Hello

  If you cannot use recovery media, I guess that the drive is defective and must be replaced.

• Problem with digital I/o read and write in CVI

  I have a PXI with PXI 6225 Renault installed box. For some uses, I wired 4 lines of digital port 0

  for its 4 top lines so that the output digital on bottom lines can be read as a digital input on the top lines.

  In the CVI program I have set up two input and output of tasks as follows:

  Enter task:

  DAQmxCreateDIChan (digitalInputTask, "PXI1Slot5/port0 / line4:7","InputLines", DAQmx_Val_ChanForAllLines ");

  DAQmxCfgSampClkTiming (digitalInputTask, ' AI/SampleClock ", 4000, DAQmx_Val_Rising, DAQmx_Val_ContSamps, 2000" ");

  Output task:

  DAQmxCreateDOChan (digitalOutputTask, "PXI1Slot5/port0 / line0:3","OutputLines", DAQmx_Val_ChanForAllLines ");

  DAQmxCfgSampClkTiming(digitalOutputTask,"ai/SampleClock", 4000, DAQmx_Val_Rising,DAQmx_Val_ContSamps, 2000));

  DAQmxCfgOutputBuffer (digitalOutputTask, 2000);

  I also started a task of analog input to ensure that the analog "IA/SampleClock" sample clock is running, and I check

  as I interpret the correct analog data of my analog lines.

  Here's the problem:

  I write 2000 identical samples of zero for the 4 lines (port0/$line0... (3) with the following command:

  DAQmxWriteDigitalU32 (digitalOutputTask, 2000, 1, 10, DAQmx_Val_GroupByChannel, sampleArray, & writing, NULL);

  After a while, I try to read the 4 lines (port0/4... (7) using the:

  DAQmxReadDigitalU32 (digitalInputTask, 2000, 10, DAQmx_Val_GroupByChannel, scanArray, 2000, & read_num, NULL);

  but the values returned in scanArray are nil!

  If I replace the digitalInputTask by digitalOutputTask in the above function call, I get the good samples rewritten

  (do not know how the 4 lines below that are configured in output mode can be read back! could it be just read buffer?)

  I don't know that the hardware configuration is correct, because when I try to emulate this feature in Labview, it works.

  (I use an output data acquisition assistant to write down the 4 lines of port 0, using a digital wave of entry, then)

  top reading 4 lines with the help of one Assistant DAQ to enter a digital waveform VI.

  In another test, I have 4 lines below in CVI, put on stop my CVI program, start a simple Labview VI to read from

  upper 4 lines and I can see the values I just write in CVI).

  Any idea what could be causing DAQmxReadDigitalU32 to read only zeros in CVI?

  I compared my settings in CVI with parameters DAQ assistant in Labview and tried to make them identical, but nothing helped.

  Thank you

  Try to use these examples to see if you can read and write in CVI