Tables of Images with different heights, causing the removal of Menu

Similar Questions

• Image with width percentage causes the offset Y

  When I put an image spark or mx on a percentage width, or 30%, the image is shifted location Y expected / desired. I have the Image in a HBox and I wait until it is flush with the top, but it seems to keep the same focus as the image full-size adding padding to the top.

  Any suggestions?

  Try to do the following:

  1. PaddingTop set to the myBox 0
  2. PaddingLeft set to the myBox 0

  Image of the spark isn't horizontalAlign and verticalAlign, if the steps above don't work, try with a mx Image and setting the horizontalAlign and verticalAlign on the image for the top and left.  Looking at your picture, it seems that it is the scale of the image horizontally and vertically and the pixels of the image of drawing in the vertical center of the Image.  You must specify the Image in order to align the top and left.

• How to export a series of images in different proportions at the same height

  How to export a series of images in different proportions at the same height?

  I have a slider callery for my Web site. all images must be of 750 Pixels high, that width is not serious.  I have a mixture of images of pandscap and protraite square, I can do the thing as an export or what I have to do it twice?  Once for the long edge and once for shooting edge?

  Thank you

  Yes, you can, but there is a thing for her.

  In the export as dialog boxSelect Widdth & height.

  Then enter 750 pixels in height.

  Place the cursor in the width field behind all the numbers that appear there and with the BACKSPACE key delete the numbers. If you enter "0" it will not accept that. But she accepts when you remove just the field for the width with the BACKSPACE key. The field width will now be just empty.

  When you export then images will have a height of 750 pixels and width will fall variously according to height then / ratio.

  Or alternatively, you can enter 7.5 "in height at a resolution of 100 dpi.

• Why I get two files with different names but the same image when I save in 2015 CC Photoshop?

  Why I get two files with different names but the same image when I save in 2015 CC Photoshop?

  Try resetting the PS preferences - Preferences in Photoshop

  ~ Rohit

• Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the

  Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the move tool. They have become a composite of two layers which could be developed further with the mask tool.

  Hello

  Please go to the preferences > workspace and uncheck the option 'open the document in the tabs '.

  

  Now you can click on file and choose file > open and open the two images in two different windows which can be arranged side by side.

  Thank you

• Combine data sources with different granularity in the same fact table?

  I have two operating tables 'Incident (157 columns)' and 'unit (70 Colums) '. For all the "incidents" happening there could be one or more records in the table of the 'unit '.
  
  As part of my design of data mart, I have merged the tables in one "makes the incident (227 columns)" and insert records from two tables with a join condition between them [incident. IN_NUM = Unit.IN_NUM].
  
  Is this correct, is my question? or am I mix data sources with different granularity in the same fact table. Appreciate your help.
  
  Best regards
  Bees

  Bees,
  Are the measures of the 'Incident', repeated during an incident given, in more than one record in the table of the unit? If so, then the sum (indicent.measure) will give an incorrect result?

  What is there to merge physically tables set outside OBIEE? With OBIEE you might have a table of 'facts' logic to present the user with report, which from tables separated units and Incidents and would stop the occurrence of incorrect aggregations. A common piece of modeling in the same way would be arrested in OBIEE headers and lines of command, quite common to have a logical fact 'orders' which contained the two header orders and order line, this translates into the Incidents-> relationship of units.

  To do what I mentioned, is relatively simple, you need a "Dim - Incident" at two levels, unit, mapp and Incident unique identifiers as keys to level and then use these levels to define the content of the levels correctly in your 2 tables logic sources logic "done", IE the LTS Incidents at incident level LTS units as level of units.

  Hope this helps, let us know if you get stuck.
  See you soon
  Alastair

• Invalid SQL syntax causes the removal of the view

  I have found that when you change a view through SQL Developer, entering the syntax invalid SQL and hit 'Cancel' causes in my opinion should be deleted. Here are the steps that present this problem for me:
  
  1. create, save, and close a valid database view by clicking right "views" on the Connections tab and selecting «New view...» »
  2. open the view via a right click on the view and selecting ' Edit... »
  3 change to point to a non-existent table
  4 try to save, select "OK".
  5. when presented with an error message, click OK in the dialog box "Edit Error object.
  6. click on 'Cancel' in the window "Edit View".
  7. right click on the view, and then select 'open '. The "SQL" tab is empty, even though you can see the value in the "Columns" tab
  8. after refreshing, the view is a party.
  
  I looked under the problems known and searched the forum to see if it had been reported. Please let know us if there is some setting I can change to avoid this problem. I hope it's a bug, because I can't imagine the changes not saved, causing the removal of the view would be the desired behavior. Please find below my contact information of the environment.
  
  -Matt
  
  Details of the environment
  ==============
  
  The version of SQL Developer: 3.0.04 build HAND - 04.34
  DB version:
  Oracle Database 10g Release 10.2.0.4.0 - Production
  PL/SQL Release 10.2.0.4.0 - Production
  "CORE 10.2.0.4.0 Production."
  AMT for Linux: release 10.2.0.4.0 - Production
  NLSRTL Version 10.2.0.4.0 - Production
  Java version:
  Java version "1.6.0_16.
  Java (TM) SE Runtime Environment (build 1.6.0_16 - b01)
  The Client Java VM (build 14, 2 - b01, mixed mode, sharing)
  OS: Windows XP Pro SP2

  Yes.
  Changed to Bug 12334150: EDIT DELETED THE VIEW DIALOG box ON entering a not VALID AND the CANCELLATION of THE DIA SYNTAX

  -Rambeau

• working capital with images of different sizes in the table

  Hello, I have a table with images of different size.  I want to use a bearing on each Panel, but my image is not the same size.  When I roll over the image the first image disappears.  Any suggestions?  I use CS5.5 Show map to the bottom.of page.

  Kappa Delta Pi

  Thank you

  Also I have never been able to use the "Preview in browser" globe icon  I don't seem to be, any suggestions on how to add this?

  A very simple solution is to make a second image that contains the image superimposed on the map. You must have 4 total images for this (all images have the same size):

  1. the plan with no photos

  2 - 4. The card with a unique image on the desired region (i.e., 3 additional images).

  In your access points, you exchange the entire map with the map of the desired region.

• table of facts with different granularity

  I have a table of facts, the measure with different granualrity, for example, there is a fact table named project and in the project, there is a certain columns as project, value of opportunity, (an opporuntity have many project). So I add the value of the project and the value of Opportuntity
  per month, how the sum of the value of opportuntity? (I want the sum of the separate Opportuntity value). someone at - it Suggetions. Thanks in advance.

  It is a problem of command in the Planner. We have solved like this
  Add a flag column in the fact table to identify the unique opportunity. Let's say that

  OPP project val FLAG

  1 1 100
  100 1 0
  200 1 1
  200 1 0

  The value - SUM (project value) of the project
  OPP brush - Filter (sum (opp) indicator = 1) gives you the value of the separate opp.

  Another way is to divide your fact LTS1 and LTS2... You can try, but I feel THAT FLAG is acquisitions.

• Space evenly movieclips with different heights?

  I have the following code, which works well when all the boxes have the same height. The fundamental point is that I have three boxes on the stage, 10 pixels apart. If you click and drag the boxes above or below the other, they reorganize.

  // based off Dynamic Stacking AS3 @ http://blog.soulwire.co.uk/code/open-source/dynamic-stacking
  
  var mcArray:Array = [mcA, mcB, mcC];
  var mcSpacing:int = 10;
  
  goStart();
  
  function goStart() {
       for (var i:int = 0; i < mcArray.length; i++) {
            mcArray[i].y = (mcArray[i].height + mcSpacing) * i;
            mcArray[i].addEventListener( MouseEvent.MOUSE_DOWN, boxPress );
            mcArray[i].addEventListener( MouseEvent.MOUSE_UP, boxRelease );
       }
  }
  
  function boxPress(e:MouseEvent):void{
       e.currentTarget.startDrag();
       e.currentTarget.parent.addChild(e.currentTarget);
  }
            
  function boxRelease(e:MouseEvent):void {
       e.currentTarget.stopDrag();
       moveBoxes();
  }
  
  function moveBoxes():void {
       mcArray.sortOn( 'y', Array.NUMERIC );
       
       for (var i:int = 0; i < mcArray.length; i++) {
            mcArray[i].x = 350;
            mcArray[i].y = (mcArray[i].height + mcSpacing) * i;
       }
  }
  

  How to do it if the boxes are different heights, while keeping the same functionality? I know that magic is in this line:

  mcArray[i].height + mcSpacing
  

  But I'm not strong enough math skills to understand.

  This line contains the problem, but you can call it magic if you're a glass - half-full type.  If you have different heights, you have to stack things starting with 0 and adding to the height of each object (plus 10) each time.  This line as expected assumes that the height never varies, so it's just multiplying the same height for each new position.

  Try...

  function moveBoxes (): void {}
  mcArray.sortOn ("y", Array.NUMERIC);

  var YCourant: Number = 0;

  for (var i: int = 0; i< mcarray.length;="" i++)="">
  mcArray [i] .x = 350;
  mcArray [i] there = currentY;

  currentY += mcArray [i] .height + mcSpacing;
  }
  }

• How to remove the malicious software that is causing the pop up ads "to go around the web"?  These pop ups appear on almost every page I open and I have bad non-kid-friendly images?  Apple instructions for the removal of the malware did not help.

  How to remove the malicious software that is causing the pop up ads "to go around the web"?  These pop ups appear on almost every page I open and I have bad non-kid-friendly images?  Instructions from Apple to remove the malware have not removed despite them a number of times.

  Click here and follow the instructions. If you would rather not remove it manually, you can run rather MalwareBytes for Mac.

  MalwareBytes is a removal tool and does not stop adware or other malware from entering the computer. It should not be invoked to prevent future incidents; Instead, avoid downloading software from sources other than the Mac App Store or Developer Web sites.

  (140621)

• How to watermark multiple images with different dimensions in Photoshop?

  Is there a way I can place a watermark on the bottom right of the multiple images, any size images? I tried to use Photoshop Scripts > image processor, but it only works for images of the same size. I want to put the watermark on multiple images of different sizes. It is the output I got.

  For the first image watermark placed properly, but for the second picture watermark is distracted. As you can clearly see the dimensions are different. Please suggest me a solution.

  

  

  As this video should help you.

  How to watermark multiple images in Photoshop CS6 - YouTube

• Both adf shares VO even with different params on the same screen

  Hello everyone,
  My current problem is that I need to create a screen with several sharing the same VO graphics but with different settings for each of them.
  Lets assume I want to use EmployeesVO to show the 2 graphs on the same page jspx.
  A chart will display all the salaries of employees for the "Marketing" Department and the other will show all the salaries of employees for the Department 'IT '.
  Remember, I want them both on the same screen.
  The read-only VO will look like this:
  SELECT First_Name
  Salary
  Employees
  WHERE department_id =: p_dept
  
  To do this, I did the following:
  For each graph, I created an iterator.
  For each iterator I created an ExecuteWithParams. (a receiver "Depto Marketing" and anther receive "IL Depto")
  For each ExecuteWithParams, I created an InvokeAction.
  
  When executing the application all the graphs show the same information. All of them show only one (the last in the list of executables InvokeAction) Department.
  
  The question is: how to keep each graph has their own parameter on the same screen?
  
  I use Windows 7 x 64 SP1 JDeveloper 11.1.2.1.
  
  Thanks in advance!

  Why not add 2 instances of the same original version of AM. For each instance of defined the different VC.

• Sign up between 2 tables without correspondence with values and keep the number of rows in the first Table

  Hello Experts,

  I have a problem that is a little tricky. Requirement is if 2 columns (region and Code in the tables below) match exactly, then it is Best Fit, if one of the columns match while it is average in shape, if the two columns do not match then it's worse to adapt.

  Create Table Table1 (varchar2 (10), varchar2 (10) of the filter region, Code varchar2 (10), revenue Number (15), owner varchar2 (5));

  Table1:

  Insert into Table1 values ('Test1', 'Midwest', '0900', 3000286, 'P1')

  Insert into Table1 values ('Test1', 'Midwest', '0899', 36472323, 'P2')

  Insert into Table1 values ('Test1', 'Midwest', '0898', 22472742, "P3")

  Insert into Table1 values ('Test1', 'West', '0901', 375237423, 'P1')

  Insert into Table1 values ('Test1', 'West', '0700', 34737523, null)

  Insert into Table1 values ('Test1', 'West', '0701', 95862077, "P3")

  Insert into Table1 values ('Test1', 'South', '0703', 73438953, 'P4')

  Insert into Table1 values ('Test1', 'South', '0704', 87332089, 'P1')

  Insert into Table1 values ('Test1', 'South', '0705', 98735162, 'P4')

  Insert into Table1 values ('Test1', 'South', '0706', 173894762, "P9")

  Insert into Table1 values ('Test1', 'South', '0902', 72642511, 'P6')

  Create Table Table2 (filter varchar2 (10), region varchar2 (10), Code varchar2 (10), plafond1 Number (15), Limit2 Number (15));

  Table2

  Insert into Table2 Values ('Test1', 'ALL', ' 0902', 15000, 10000)

  Insert into Table2 Values ('Test1', 'ALL', 'ALL', 20000, 12000)

  Insert into Table2 Values ('Test1', 'Midwest' ' 0900', 10000, 5000)

  Insert into Table2 Values ('Test1', 'Midwest', 'ALL', 18000, 8000)

  Insert into Table2 Values ('Test1', 'West', 'ALL', 16000, 6000)

  Insert into Table2 Values ('Test1', 'West', '0901', 10000, 5000)

  Final output

  Filter the income Code region owner plafond1 Limit2

  Test1 0900 3000286 P1 10 000 5 000 - Best Midwest (region because both Code Matches)

  Test1 0899 36472323 P2 Midwest 18 000 8 000 - way (because the region corresponds to only), we consider 'ALL' for the Code

  Test1 0898 22472742 P3 Midwest 18 000 8 000 - way (because the region corresponds to only), we consider 'ALL' for the Code

  Test1 West 0901 375237423 10 000 5 000 - Best P1 (region because both Code Matches)

  Test1 West 0700 34737523 16 000 6 000 - medium (because the area corresponds to only), we consider 'ALL' for the Code

  Test1 West 0701 95862077 P3 16 000 6 000 - way (because the region corresponds to only), we consider 'ALL' for the Code

  Test1 South 0703 73438953 P4 20 000 12 000 - worse (because region both Code DON T Match ' "), we consider option as worst 'ALL', 'ALL '.

  Test1 South 0704 87332089 P1 20 000 12 000 - worse (because region both Code DON T Match ' "), we consider option as worst 'ALL', 'ALL '.

  Test1 South 0705 98735162 P4 20 000 12 000 - worse (because region both Code DON T Match ' "), we consider option as worst 'ALL', 'ALL '.

  Test1 South 0706 173894762 P9 20 000 12 000 - worse (because region both Code DON T Match ' "), we consider option as worst 'ALL', 'ALL '.

  Test1 South 0902 72642511 P6 15 000 10 000 - way (because the Code corresponds to only) we consider 'ALL' for the region

  In the final result, we should have row count equal to Table1, and as soon as there's game (best first, then middle, then the worst), then if is once again, that we should ignore.

  There are other columns in the tables as well.

  Thank you very much!

  As you wish...

  select filter, region, code, region2, code2,
  revenue, owner, limit1, limit2, match
  from (
    select filter, region, code, region2, code2,
    revenue, owner, limit1, limit2, match,
    row_number() over(
      partition by filter, region, code order by match
    ) priority
    from (
      select a.filter, a.region, a.code, a.revenue, a.owner,
      b.region region2, b.code code2, b.limit1, b.limit2,
      case
        when (a.region, a.code) = ((b.region, b.code)) then 'Best'
        when a.region = b.region or a.code = b.code then 'Medium'
        else 'Worst'
      end match
      from table1 a
      join table2 b
      on a.filter = b.filter
      and (b.region, b.code) in (
        (a.region, a.code),
        (a.region, 'ALL'),
        ('ALL', a.code),
        ('ALL', 'ALL')
      )
    )
  )
  where priority = 1
  order by region, code;
  

• I'm a noob and have problems with several buttons on the pages of menu bar

  Hi all

  I'm building a site of basic database for my local community, and everything is fine until I try to add more script for the command buttons on the pages in the menu. The menu has 7 buttons that work, then on each of these pages are more than 6 buttons. The first page works fine but when I add the code to the following page to control its buttons access of undefined prop. error and continues to play through any chronology. It's the im code using control buttons on the pages in the menu. If someone could help that would be great.

  Nothing particularly wrong with the code you show it, it is more likely a matter of trying to affect a bad code.  If you can view the actual error message you get can narrow the problem... before that if you go in your publish the Flash settings section and select the option to enable debugging, the error message will have a bit more info in there.

  If you can describe this scenario where you have other buttons on other pages as well as how these pages differ from each other, which can be useful as well.  What are all the labels image linked to... the main timeline?  Is - this code on the main timeline or in the pages?