How to read the report of the unit for HP Deskjet 1510

Similar Questions

• How to read the worksheet for setpoint speed using the speed control (Closed Loop)

  My VI is able to go through a series of speed reference points that lie in a sort of constant matrix. I have to be able to go through a series of hundreds of game points, and fill in the constant table whenever I have a new profile to test don't will not work.

  I tried to use a reading of block of spreadsheet and table of Index to read values from a worksheet, but when I run the program, it does not seem to read the values in the file.

  The path must be correct, but I don't know if there may be a problem of formatting with file worksheet regarding the delimiter. Or maybe not all the parameters are filled with reading block of spreadsheet.

  Anyway, any help with my problem would be appreciated. I'll give the VI as an attachment to this post. Nine set points which worked with the VI are in the constant blue table, which was previously set to where the entire Long block is now fixed.

  Brandon

  Hi Brandon,.

  That's right, I withdraw my previous response. I apologize to this topic.

  I noticed that in your code, you select the line at index 0 instead of the first column. When you use the table to Index out of the loop block, make sure that you select the column at index 0 so you can enter the first column in the input file. This should get you 1 d table you're looking for.

• How to read the raws for sony ILÇE 7M 2

  I do not see the raws of sony nex 7 II in lightroom 5.7

  You must 5.7.1.

  Camera Raw plugin | Supported devices

• How to read the Statspack report in Oracle 11.2 g Standard Edition

  Dear all,
  
  I use Oracle 11.2 g Standard Edition in the laboratory.
  
  For the performance tuning, how to read the Statspack report?
  
  Please note I cannot use the feature of Oracle AWR due to the Limitation of the license. Thus, as if I will generate report AWR with Oracle Standard Edition, it will be not correct error and printing "time DB is equal to zero for any report interval."
  
  Sumit-
  Bangalore, India

  The CWA requires additional licenses - Oracle's Diagnostics Pack.
  http://download.Oracle.com/docs/CD/E11882_01/license.112/e10594/options.htm#CIHIHDDJ

  This is only available for the Enterprise Edition licenses on top. I don't know anyway to the CWA standard edition licenses, so I recommend against using it even where it does not on its own.

• M127fn MFP: How to read the meter of pages on m127fn mfp

  How to read the total number of pages printed on this m127fn MFP?  In status screen supplies, it shows only "pages printed with this offer.

  Due to another problem, a technician from HP told me through a hard reset, after which I had to get all of my preferences. So this mave have reset the NVRAM that is associated with the page counter as you suggest. I installed the latest firmware today but the page counter is at 104 and supplies report 634 and "basket is very low" message that is expected since it is a life of aprox 700 starter cart.

  Thank you for your insight and suggestions. I'll keep an eye on the config. page counter when I start a new shopping cart.

• How to read the files on time capsule

  How to read the files on time capsule from iPad?

  Thank you

  Using an application like navigation on the iPad. More info here:

  Stratospherix - FileBrowser - overview

• How to read the status of User1 DIP-switch with a cRIO FPGA chassis?

  How to read the State of the DIP switches on a FPGA cRio chassis?

  I work with a cRIO 9022... My idea is to put the system in "service" mode with USER1 switch to IT and communicate with the FPGA via the FPGA - GUI (VI) on the host computer instead via the RT module that is used in normal conditions.

  Any ideas? Unfortunately, I don't have an unused channel on the left... .and (as I know) cannot use the interface RS232 of FPGA.

  Many thanks in advance,

  Luke

  Hi, this is the correct information. You cannot read the FPGA of DIP-switch status. The only thing you could do is to use the function of Reading Switch.vi located under the range of functions-> real-> utilities RT time

  It's how you probably know side host RT and not the FPGA.

  Cordially Virginia

• How to read the value of list boxes by iteration in a loop For?

  I have a lot of list boxes on the front of my VI. I want to know how to read the value of this combo with a loop boxes For. The point is that I don't know how to get the reference of each combo box in a loop.

  Any information would be welcome. Thank you!

  su27 wrote:

  I have a lot of combo boxes on the front of my VI [...]

  

  Be sure to close the references that you have finished with them.

• How to read the VI Analyzer config file?

  Hello

  How to read the analuzer vi configuration file? I'm getting a lot of errors on the size of the front panel and I don't know what should be the size you want. Where is the maximum expected size of the specified front panel?

  Kaspar says:

  Hello

  How to read the analuzer vi configuration file? I'm getting a lot of errors on the size of the front panel and I don't know what should be the size you want. Where is the maximum expected size of the specified front panel?

  If you have VI Analyzer installed, you can load the configuration file and look at the section select the Tests. There is a test for the maximum size of front under front-> User Interface. The default value is the resolution of the current monitor of the PC (including multiple monitors). You can change to the desired option.

• How to read the date and time of a file by labview information

  How to read the date and time of a file by labview information? for example, time created and updated time.

  The similar question had already spoken here (this is the old thread but still seems topical):

  http://forums.NI.com/T5/LabVIEW/file-date-created/TD-p/109836

• How to read the host name or serial number cRIO locally

  I have not worked with cRIO and decided to ask for help.  (o).

  I don't know about the screws that allow to access this information from a connected Windows machine, however, I want to retrieve and display this information on remote panels.  But I cannot determine how to read the cRIO hostname or the serial number of the software running on the cRIO?

  Thanks for the help.

  James

  This could help.

• How to read the two columns of data from the Port series

  Hello

  I'm reading two columns of data from the serial port.

  Example:

  52439 52430

  52440 52437

  52209 52214

  51065 51070

  52206 52390

  I use the serial of Visa service and I can read the first column of data from the serial port, but I can't understand how to read the second column.

  I want to both sets of chart data.

  I enclose my VI.

  Thank you for your help.

  The analysis of string function takes a "Format string" on top (with the right button of the function and choose Help, which explains all the entries).  In particular, you can say 'Give me two numbers separated by a tab' and the output will be two numbers (whole or floating, depending on the chosen format).  In particular, %d\t%d specifies a decimal integer, , whole decimal.

• How to read the color table in a subvi?

  How to read the color table in a subvi? Is it made by a reference to the table or with a global variable? For a better understanding of the problem, I added to vi. Run the "run.vi." I want to see

  the background color of the table "run.vi" in the subvi called "read color.vi".

  How can I do?

  Thanks in advance

  Norick

  pop up on the wire table refernece and establishes 'control '. Add this control to the icon of the sub - VI decision-making and then wire ref of the appellant to this Terminal VI so the calling VI move the ref to the Subvi.

  Ben

• How to read the 32-bit depth .bmp image

  How to read the image, 32-bit depth using LabVIEW .bmp?

  
  

• How to read the analog inputs of one Board of R for (PXI-7851R) series

  You can guide me please with the steps for reading of the analog inputs of a series a. card I use as the target fpga PXI-7851R.

  Have you looked at the examples provided with LabVIEW? There are examples showing how to read the analog inputs.