How to read the video stream directly with Flex?

Similar Questions

• How to read the 16 bytes directly from the Modbus?

  Hello

  I got problem about the modbus register.

  Means I have call serial No. Which is given the address of 5000 and series not is 16 bytes and each has high and low-bit bytes.

  When I call using Modbus, so I can read the only first two bytes of address 5000 (4 bits) can you guide me please how I can read my serial No. bytes. Directly using modbus.

  Maybe I'm not good enough explanation so here I have attached a diagram that redbox right side indicate serial no.which I gave.

  LHS it not show the address of the register and the 12594 value is decimal maybe and then 16 bytes bytes.each has high and low bits.

  I want to make Vi the help that I can see my # of series directly on the front.

  right now I can only see 12594 value I want, I want to no.which series, I gave side pic HHR.

  Can you please guide me how I can do...

  also, I enclose example vi that I got from forum of NOR.

  Thank you in advance...

  It's basic Boolean math.

  Read the byte.  If you want to determine the value of a particular bit, you AND another value.  For bit 0 AND it with 1 for bit 1 AND 2.  ANDing with 128 will give you the value of bit 7 (bit 8 and higher).  If the result is 0, then the bit is set to false.  If the result is > 0, then the bit is true.

  Even easier is to take the number and convert it into a boolean number table function Boolean Array in the palette of the Boolean.  Then, you can index the particular Boolean you want from the table.

• How to read the videos recorded using the FLVPlayback component?

  Hey guys,.

  I recorded video using fms and I want to play using the FLVPlayback component. I did some research but I can't find something

  useful, I tried this code:

  FLVPlayback.source = "rtmp://localhost/appname/instancename/video";

  This code does not work. Did I do wrong or something? Can someone tell me please on track!

  Thanks in advance!

  Randy

  You may probably want to use something like a text box can be changed in your swf file, where a path is entered could be played by the FLVPlayback component in the swf file.

• How can I set up a network in the car for the video stream to iPad?

  Hello

  I'm looking to determine the best way to stream video to iPad in the car.

  The children had a mini iPad each with only 16 GB of HD.

  This does not need to store lots of video material.

  So, I'm looking for the best way to allow the video stream in the car.

  I have about 1 TB of films in different formats on a mobile HD and I was wondering what would be the best way to give children access to this material when driving. My car has no other connectivity or any what built-in Wifi.

  There is no need of the Internet, I just they are able

  I've searched the Internet to find solutions, but much to my surprise, there is only a limited amount of info

  Thanks in advance

  There is no way that transmit video for example:

  YouTube, netflix, BBC iPlayer, Hulu more demanding and Internet connection

  If you live in the United Kingdom:

  EE (A Mobile to the United Kingdom network provider) a WiFi car service go to the site

  or you could get the cellular iPads and start a hope of data plan that allows to

• How to read the status of User1 DIP-switch with a cRIO FPGA chassis?

  How to read the State of the DIP switches on a FPGA cRio chassis?

  I work with a cRIO 9022... My idea is to put the system in "service" mode with USER1 switch to IT and communicate with the FPGA via the FPGA - GUI (VI) on the host computer instead via the RT module that is used in normal conditions.

  Any ideas? Unfortunately, I don't have an unused channel on the left... .and (as I know) cannot use the interface RS232 of FPGA.

  Many thanks in advance,

  Luke

  Hi, this is the correct information. You cannot read the FPGA of DIP-switch status. The only thing you could do is to use the function of Reading Switch.vi located under the range of functions-> real-> utilities RT time

  It's how you probably know side host RT and not the FPGA.

  Cordially Virginia

• 23 envy d027c All In One with the card mother Lavaca3-SB IPISB - NK. How to upgrade the video card?

  I have a HP Envy 23 d027c All In One with the card mother Lavaca3-SB (pegatron) IPISB-NK.  It has a PCI slot available for upgrade of the video.  I want to do this.  I intend to use the pc for video processing and maybe a few games.

  How to pass the video?

  What cards are best for this system?

  What has changed in the BIOS or other settings I should do?  How can I get them?

  Thank you

  Art

  The PCIe MXM slot is for HP install graphics cards in some models CTO (configure-to-order). Without the card installed when you purchased the computer, there the fan and radiator bad sets. You will need to buy a graphics card and the heatsink / fan of HP to try to upgrade the GPU in your computer. There is an extensive disassembly involved in this procedure. All-in-One computers have much more in common with laptops than they do with traditional desktop computers.

  Honestly, if you want to do video processing and games... you should get a traditional desktop with enough CPU and GPU for these activities.

  Please click the White Star of KUDOS to show your appreciation

• How do I export video on DVD with over the loss of its quality

  How do I export video on DVD with over the loss of its quality

  Comparison of video screen photo sizes http://forums.adobe.com/thread/1120039

  When you change HiDef video and down the size to the size of 720 x 480, a DVD, you will lose a quality of image... but your DVD will look always 'good' considering the mandatory resolution of a DVD-video

  Export of the body using the MPEG2-DVD preset and import are still the TWO files (audio and video) for the creation... If you stay in the 'legal' to create a DVD, yet will not transcode again

  CS5-thru-CC body/Encore tutorial list http://forums.adobe.com/thread/1448923 has many links to help learn

  Instructions again, cloud or version https://forums.adobe.com/thread/1992717 serial number

  -a of notes on different versions of cloud and step by step on these differences

  -contains information about the separate library download which is necessary

• Flex, AIR and the video streams remotely

  Lets say I want to connect two AIR applications, running on two computers of different work and video stream directly from one to the other. How could I go about this? Would it not possible to use the NetConnect and NetStream classes?

  Documentation of NetConnect said basically, that if its not connect to FMS, it can connect to a local file or a file on a Web server. However, the same documentation also says that the command of the connect method parameter is of the following form:

  protocol:[//host][:port]/appname[/instanceName]

  so, I wonder what protocols are supported? would be TCP: UDP or: work? (I doubt it because it seems that it requires a file name for access instead of just a port)

  
  Since the support lock frame writes to a file, I thought it might be possible to connect two clients with the help of the Socket classes and then write the incoming stream to a file, which could then be read by NetConnect + NetStream.

  It seems to me terribly backwerds and he brings on another problem on the client sends the stream, if I use NetConnect + Netscream to connect to a file and uses the features of transmission/dissemination, he actually write to this file? And besides, wouldn't be a writer of blocking? Ffrom looking at this part of the framework, I really suspect adobe wants me to use FMS full stop (I mean, how it would be difficult to offer a generic binary stream?) ... which is fair play, but it has no presence for any AIR application that needs to send his our video directly to another customer. You might think, why not 'just' to use FMS, but the thing is:

  Why would a: I? It's 1-to-1 very simple 'power' flow? Why put a server between two clients just for fun?
  B: video could stick as a Bloodsucker a little bandwidth on the server, the bandwidth costs money, internet bandwidth of customer connection are free of charge in most cases.

  All that being said, I don't know much on FMS... He would let a customer enroll in a stream on the server, and then have other clients connect directly to that customer by subscribing to the feed? or steam should go well the server?

  Anyway, any input would be appreciated, the question is really quite simple. Direct video connection between two clients of the AIR... thoughts?

  Hello

  You can use RTMFP and stratus FP10 for this.

  http://labs.Adobe.com/technologies/Stratus/

• How to split a video for use with Windows Movie Maker

  movie maker help?

  my video is too long, so he used open, does anyone know how I can divide or shorten it so I can open it in movie maker?

  Thanks :)

  my video is too long, so he used open, does anyone know how I can divide or shorten it so I can open it in movie maker?

  Thanks :)

  ===============================================
  Are you sure that is the problem and not an incompatible format?

  In any case... the following freeware might be worth a try:

  VirtualDub
  http://www.videohelp.com/tools/VirtualDub
  (left click of he who said):
  "Download from mirror (direct link) (1.3 MB)")
  (installation is not necessary... just unzip)
  and run it by clicking left VirtualDub.exe)

  VirtualDub: Splitting AVI files
  http://www.Afterdawn.com/guides/archive/cut_avi_with_virtualdub.cfm

  VirtualDub: How to split the video
  http://www.ScreenVirtuoso.com/VirtualDub-split-video.html

  Video editing tutorial - using VirtualDub
  http://www.astahost.com/info.php/video-editing-tutorial_t11655.html
  > not compatible with .wmv or .asf files

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to get the video intro off my google home screen I already saw it, where is the firefox logo used to be.

  How to get the video intro off my google home screen I already saw it, where is the firefox logo used to be. I started with the last update that I rebooted.

  Hello
  to change the homepage when opening firefox-press 'Alt' and click on tools-> Options.

  Main menu, you can change the URL.

  If the problem persists, you can follow these simple steps:

  Enter about: config in the address bar and press ENTER. Accept the message of 'dragons' to see the Advanced preferences screen. Use the above search box to enter the below pref.
  

  You can assign an empty string to stop your Firefox to retrieve "extracts" and brandLogo changes the browser.aboutHomeSnippets.updateUrl pref. Right-click this pref and select Edit then clear the value as pref in the box that appears, and then click OK. Who will also disable "snippets" that appear under the container of the research on the default home page.

  Then you must open the folder of your profile, via help > Troubleshooting Information > profile folder > > button view folder. Then close Firefox. Your profile file open with Firefox closed (Firefox '3-bar' menu key > exit/Quit), wait or two minutes, then remove the storage\moz-safe-about + home folder in the Firefox profile folder to remove the brandLogo and stored in IndexedDB code snippets to make Firefox use the default brandLogo and a defined default code snippet.

  If you later change your mind about these changes, you can reset the pref browser.aboutHomeSnippets.updateUrl via the context menu and Reset allows to retrieve the default value using the storage\moz-chest-fort-about + home folder again.

• When I'm not able to use the video stream on the BBC website.

  At the same time, I was able to use the video stream on the BBC website. I am more able to do. However, I use the video streams on other news sites.

  If the videos are Flash videos, you have disabled an option in Flash preferences to not allow sites to store Flash cookies on your machine. Made BBC videos in Flash are expecting to be able to store cookies Flash, so videos can not work with this option off Flash.

  Go to Storage Global Flash Settings Panel which serves as Adobe/Macromedia site and check the box «Allow third-party Flash content...» ", where you can then manage the sites you have already visited. You will need to reload the page from the BBC after you change this setting.

• How to read the value of list boxes by iteration in a loop For?

  I have a lot of list boxes on the front of my VI. I want to know how to read the value of this combo with a loop boxes For. The point is that I don't know how to get the reference of each combo box in a loop.

  Any information would be welcome. Thank you!

  su27 wrote:

  I have a lot of combo boxes on the front of my VI [...]

  

  Be sure to close the references that you have finished with them.

• How to read the host name or serial number cRIO locally

  I have not worked with cRIO and decided to ask for help.  (o).

  I don't know about the screws that allow to access this information from a connected Windows machine, however, I want to retrieve and display this information on remote panels.  But I cannot determine how to read the cRIO hostname or the serial number of the software running on the cRIO?

  Thanks for the help.

  James

  This could help.

• How to read the two columns of data from the Port series

  Hello

  I'm reading two columns of data from the serial port.

  Example:

  52439 52430

  52440 52437

  52209 52214

  51065 51070

  52206 52390

  I use the serial of Visa service and I can read the first column of data from the serial port, but I can't understand how to read the second column.

  I want to both sets of chart data.

  I enclose my VI.

  Thank you for your help.

  The analysis of string function takes a "Format string" on top (with the right button of the function and choose Help, which explains all the entries).  In particular, you can say 'Give me two numbers separated by a tab' and the output will be two numbers (whole or floating, depending on the chosen format).  In particular, %d\t%d specifies a decimal integer, , whole decimal.

• How to read the color table in a subvi?

  How to read the color table in a subvi? Is it made by a reference to the table or with a global variable? For a better understanding of the problem, I added to vi. Run the "run.vi." I want to see

  the background color of the table "run.vi" in the subvi called "read color.vi".

  How can I do?

  Thanks in advance

  Norick

  pop up on the wire table refernece and establishes 'control '. Add this control to the icon of the sub - VI decision-making and then wire ref of the appellant to this Terminal VI so the calling VI move the ref to the Subvi.

  Ben