How to record on an output table iterated data

Similar Questions

• How to record a sound output on laptop

  Hi, I use to listen to the lectures online, meetings and music on my laptop (Compaq) with headphones or external speakers attached to it. I have WINDOWS 7 OS. I want to RECORD the audio output automatically in my newly created music folder on the E drive. How will it be possible?
  then it will be possible to record SIMULTANEOUSLY listening to headphones? WHAT IS THE METHOD? What changes to the required system? please give ankylosis of the caliper/changes of processes
  Thank you

  Three things:

  (1) unless your audio device is an option like "Stereo Mix", "what you hear" or similar, then you can not record audio streams on the web.

  (2) you can Google for "free virtual audio device", download and install any software takes your fancy. You then stream in the virtual and output device in your physical device. Use Audacity to record from a device.

  (3) you buy a second device to aucio. Audio stream using your default device, plug line of the second device offline, download and use Audacity to record the application (you can choose the device to recording here).

  See you soon,.

  Jerry

• How to record entries of UI with the data measured in a TDM file?

  Hello

  I built a user interface to monitor and control a pump test bench, I use the USB-6212 in a Windows PC with the new SW and readers.

  Now I try to collect all the measured data and control values in the UI, permanently at 1 kHz and write it in a single file of CT.

  The problem is that only the measured signals get connected, but only a few values at the beginning of the file are saved in the user interface; then all empty.

  I have all tried, producing waveforms, synchronize them with measured data for the same stamps, aling & resample and blocks of collector of the Toolbox Signal Express, but there are still some missing data in the user interface.

  In my original configuration, indicated in the post, I set up the block of analog to read continuously at 1 kHz with 100 samples, while output and analog digital on-demand writing. I have included the file complete, just in case some block causes disruption.

  

  

  Your express DAQ screws will probably be reading/writing of multiple samples for each run, then wire you a single value for your set points. The use of the data type of dynamic signals hides this information from you (that's why nobody is using them once they become more familiar with LabVIEW).

  You need to take only the last value of dynamic data, or touch your set points so they are the same size as your dynamic data. If you write 100 samples at a time, then you will have your set points only once by 100 values. You must create a table/waveform of 100 points with the same value.

• How to record a fixed time of dynamic data interval when acquiring continues?

  Hi, maybe someone has an idea how to solve this problem:

  I do the continuous acquisition of dynamic data and when I see something interesting, I would like to save some data (i.e. the last 90 seconds). I guess the first step is written data in a table? I can set up the table so that it always contains just the last N seconds (or last N points, discard the rest as the measure of the loin) so I can then save this data, for example by pressing a button (possibly without stopping the .vi, or maybe just a break it.) This last step is not necessary)?

  Thanks for all the suggestions!

  Hi Tomaz79,

  You can generate as a black box on an airplane. You can initialize an array with the size of your 90 s write all data in this table by crushing at the specified index. With Quotient & rest, you will get the correct index for the next value. If you find your compelling value, you can be sure you'll get the last dry 90.

  Mike

• How to add items to a table 1 d with each iteration?

  Hello

  I have a 3 loop iteration For which gives a table of 5 elements after his execution. At each iteration of the loop, how can I add each item to its previous value to form a final picture of the cumulative sum of the parts? For example:

  Array of values for 1st iteration: [A, B, C, D, E]

  Array of values for 2nd iteration: [F, G, H, I, J]

  Array of values for the 3rd iteration: [K, L, M, N, O]

  How can I make the Final table being a cumulative amount of IE: [(A + F + K), (L + B + G), (C + H + M) (D + I + N) (E + J + O)]?

  Your help will be apreciated, thanks!

  The Add function is polymorphic. So, if you give 1 2 tables you will get a table that corresponds to the sum of each item. With a loop, you must use a node registry or feedback shift to keep track of the sum of the currents.

  For example:

• How to save a graph after each iteration in a loop for?

  Hello

  I wrote the code that initializes a spectrometer. Once initialized, if the "Capture" button is pressed, the spectrometer takes a new spectrum three times (see loop for) every second. This spectrum is shown as a diagram in my front. My code works fine... it will update the spectrum every second.

  However, I would like to be able to record each of these three iterations in the form of separate graph. Basically I want to click on "Capture" and have my code to save three graphics to a specified folder. How can I do this?

  I have attached my VI.

  Thank you.

  Probably the easiest is to take the data of the for loop and pass out in a tunnel that is indexed.  Manipulate the resulting data table you want.  You could also do a producer/consumer and write files as the data comes out.

• Cannot query the records to a temporary table

  Hello. I have a procedure that fills a temporary table. After that, I need query the records from the temporary table. I tried to run a report after the execution of the procedure, but it doesn't show any output. I checked the procedure and it works very well cause I can query the records when I tried passing the output of an 'ordinary' table But I need to move to a temporary table and need to interview there. How can I do this? Help, please. Thank you.

  Now, it works. I found the solution. Instead of using the text of two elements, I used global variables. I thought I already did, but I guess it was at the beginning, when I have not used the query in the From Clause. Thanks a lot to you Abdetu, Inol, and Andreas for assistance. I learn a lot from you guys. I couldn't solve this without your help. Keep it up and God bless you.

• Qosmio F10: How to record audio and video and use QosmioPlayer

  I am owner of a Qosmio F10-122 with TV tuner and I really need HELP. I'm Italian.

  The questions are:
  1 QosmioPlayer version 4.0.1 (2005022812) (according to the procedure of the forum) has installed fine but the sensitivity is poor; in any case the question is: is is possible to record videos? Also is it possible to record audio?

  2 input and video output are stupid; I can see Windows and QosmioTV on HDTV via DVI/SCART but I can't input in MCE TV or QosmioPlayer any signal IN Composite; so the question is once again how can record AUDIO from my Home stereo or VCR VHS VIDEO?

  3. I only use VIDEO IN to WATCH is not to save: where is my fault?

  Thanks, Marco

  Hello Marco

  I did some testing and I can tell you about my experience on Qosmio G20.

  1. as far as I know early versions of Qosmioplayer did not have the registration option but now I hope that your preinstalled version has REC option. If so, please be sure that you have about 5 GB of free space for the recorded material.

  It is not important what signal is sent to your Qosmio (TV or VCR VHS-connected) you can find it if you look at the channels. With REC option, you can save what you want. I tested it with my VCR VHS and I recorded some old movies. This material was recorder und great quality was the same as on cassettes. After recording, I started Windows MCE and transferred the material recorded in Windows using Qosmio player utility.

  I have not tried, but I put t think you will be able to record audio using only Qosmioplayer.
  2. you can record movies VHS if you connect your VCR VHS on the Qosmio using the antenna cable. Launch Media center Edition (TV option) and scan channels. In my case, I could watch movies VHS on MCE on channel 31. Using REC option you can save all documents of video cassettes. Later, you can change the recorded material and create own DVDs. It really isn't a problem.

  Your audio Home Audio recording can be a bit more problematic, and if you want it to be on the professional path you will need a device external and of course some professional recording software.
  3. I don't know what to write here. Just try to do what I already descriebed under 1 and 2.

  Good bye

• How to record video in or of port S-video on Qosmio G40?

  Can someone tell me how to record video or S-video ports, because I tried the Ulead DVD factory program and only capture device, he could see was the webcam, and he did capture her

  After that, I downloaded the file to update provided by the support Web site
  That the program could see the devices are the TV tuner and the webcam (which he could not access more for some reason any)

  After that, I downloaded a more recent update simply is identical to the last updated and seems that someone in the support Web site made the link to the new update which they do not have to file the previous update that doesn't really matter.

  Hello

  There are 2 ports s-video; s-video output port is not designed to pick up signals from an external source. This port name says it all; It s an OUTPUT port!

  S-video-in port must be placed on the right side of the laptop. Don't mix the two ports. But note; This port receives only video signals. To hear the sounds, use a video cable to connect the audio terminals of the device and your computer.
  Red: audio right channel
  White: channel left sound
  The Ulead DVD Movie factory can be used to capture this signal.

• How to record producer in an AVI file

  How to record producer in an AVI file

  How to record producer in an AVI file

  ===========================================
  If you are running Movie Maker 2012 you can save as WMV
  or MP4. Then you can convert the file to AVI format.

  ===

  Already posted by: Leonard_Su

  1. Open Movie Maker and open the project file, you (.wlmp)

  2. in the window of the program, press these keys on your selection of keyboard ALT + F
  Save Movie and choose recommended for this project.

  3. once choose your preferred destination where you want to save the
  film.

  4. change the name of the movie file and the file format of the film. (You can
  choose. WMV or MPEG-4 If you are using the latest version of Movie Maker
  2012 if you choose. (WMV)

  5. click on the button Save.

  ===

  There are to many converters available on the net...
  Some are free, some details... the following freeware
  is but one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7 / 8)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

  When you have installed Freemake... Open Freemake
  and drag and drop your video files on the main screen.

  Or... Click left on the video button and navigate to the
  your video files are saved in the folder.

  Select (highlight) the files you want to import into
  Freemake and left, click on the button 'open '.

  When video files are imported into Freemake,
  On the left, click the icon of the AVI at the bottom of the screen.

  The 'AVI output settings' screen opens.

  Choose a folder ' save in ', so you can find the
  converted files.

  On the left, click the "Convert" button and wait for the files
  to convert.

  ===

  If you install an earlier version of the Vista Movie Maker... you
  can record in DV - AVI.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows Movie Maker 6.0 on Windows installation 7 or 8
  http://movies.blainesville.com/2010/05/installing-Windows-Movie-Maker-60-on.html

  Windows Vista Movie Maker 6... record to DV - AVI

  Reach... Folder / publish movie / this computer.
  Enter a file name and choose a save location.
  Next / additional settings / DV - AVI (NTSC) / Publish.

  The following chart shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

• How the records are selected in the database

  Hello

  How the records are selected in the database

  
  

  Thank you.

  Read articles on JDBC, here is what I understand...

  If I set LignesMax = 1 (in out select adapter DB) and I have 30 record in the table that satisfy the select query then what line is picked up? the first in the table or randomly any folder?

  The query returns the first line of the result set.  Not just a random line.  However, to get the rows to return in the result set in a specific order, you must include an order by clause, or the query will return rows in random order.

  And if I set LignesMax = 0 (unbounded, means any number registration) in this case if my select query satisfy 100 million documents so all million records will be picked up once, in one cycle?

  The answer to this depends on the size of the extraction of the query.  If the size of the extraction is > = 100 million, everything goes back in a single cycle of the DB.  If< 100="" million,="" then="" it="" will="" be="" divided="" into="" multiple="" trips="" to="" the="">

• FETCH ONE RECORD IN THE SECOND TABLE OF CORRELATED SUB QUERY

  Hi all

  I have provided the script below, I want to single fecth record in the second table in the join query,

  based on the example below, I want to go get one record of the table emp2 what matches with the emp_id of table emp1, please note emp2 may contain more record for the emp_id emp1 which respects

  all records can be selected in the table emp2.

  DROP TABLE emp1.

  CREATE TABLE emp1 (emp_id NUMBER);

  INSERT INTO emp1 VALUES (1);

  INSERT INTO emp1 VALUES (2);

  COMMIT;

  DROP TABLE emp2.

  CREATE TABLE emp2 (emp_id NUMBER, emp_name VARCHAR2 (100));

  INSERT INTO emp2 VALUES (1, 'Name1');

  INSERT INTO emp2 VALUES (2, 'Name2');

  INSERT INTO emp2 VALUES (1, 'Name3');

  INSERT INTO emp2 VALUES (2, 'Conjoint4');

  COMMIT;

  SELECT * from emp1.

  SELECT * from emp2.

  SELECT T1. EMP_ID, MIN (T2. EMP_NAME)

  FROM EMP1, EMP2 T2 T1

  WHERE T1. EMP_ID = T2. EMP_ID

  GROUP T1. EMP_ID;

  My output should be the same as the result set of query above, but I don't want this logic, please provide the solution by using a different logic, thanks in advance.

  2811876 wrote:

  Thanks for your comments :-)

  My business logic will change to 'Fetch N second timeline table', that's the reason why I asked for a different approach, if I use max, min to achieve this does not allow me to evolve dynamically.

  Although logic has not been expressed at all in your original question, so good job I asked.

  You could do something like:

  SQL > ed
  A written file afiedt.buf

  1 with emp1 (select 1 as the emp_id of union double all the)
  2. Select 2 double
  3               )
  4, emp2 (select 1 as emp_id, 'name 1' as emp_name double union all
  5. Select "name 2' Union double every 2
  6 select 1, 'name' 3' from dual union all
  7. Select 2, 'name 4' double union all.
  8 select 1, 'name 5' from dual union all '.
  9 select 2, 'name 6' from dual '.
  10               )
  11-
  12. end of test data
  13-
  14 select emp_id, emp_name
  15 of)
  16 select t1.emp_id, t2.emp_name
  17, row_number() over (partition by order of t2.emp_name t1.emp_id) rn
  emp1 t1 18
  19 join t2 emp2 (t1.emp_id = t2.emp_id)
  20       )
  21 * where rn<=>
  SQL > /.

  Enter the value for rows_required: 1
  21 Alumni: where rn<=>
  21 news: where rn<=>

  EMP_ID EMP_NA
  ---------- ------
  1 name 1
  2 name 2

  SQL > /.
  Enter the value for rows_required: 2
  21 Alumni: where rn<=>
  21 news: where rn<=>

  EMP_ID EMP_NA
  ---------- ------
  1 name 1
  1 name 3
  2 name 2
  2 name 4

• Insertion of records in two different tables at the same time?

  Hello everyone, I have question about inserting records in two different tables at the same time, I'm looking for is by the way a unique id, which is created in the first statement insert to the second insert statement. Example of this problem:

  < cfquery name = "addRecords1" datasource = 'test' >

  Insert Into Table1 (name, Date, age)

  Values (< cfqueryparam cfsqltype = "cf_sql_char" value = "#arguments.) "Name # ' >.

  < cfqueryparam cfsqltype = 'cf_sql_date' value = '#arguments. "Date # ' >.

  < cfqueryparam cfsqltype = "cf_sql_int" value = "#arguments. Age #"(>); "

  Select SCOPE_IDENTITY() as RecID;

  < / cfquery >

  < cfquery name = "addRecords2" datasource = 'test' >

  Insert into Table2(Company,City,Date,ID)

  Values (< cfqueryparam cfsqltype = "cf_sql_char" value = "#arguments.Company #" >,)

  < cfqueryparam cfsqltype = "cf_sql_char" value = "" #City # ">,"

  < cfqueryparam cfsqltype = 'cf_sql_date' value = "" #Date # ">,"

  ( < cfqueryparam cfsqltype = "cf_sql_int" value = "How to pass RecID to insert in this table?" >).

  < / cfquery >

  In this example, I'm inserting records in table 1 and creation of IDENTITY SCOPE as RecId. I would like to pass this id and insert it in my table 2. This Id, I'll use in my second table as an identifier. If anyone knows anything about this please let me know. Thank you.

  );
  

  QueryName - DOT - ColumnName, so it should be:

  );
  

  HTH,

  ^_^

• How to record sound with 176, 4 kHz, and 192 kHz with hearing?

  How to record sound with 176, 4 kHz and 192 kHz with hearing on a MacBook Pro (Late2011, OS 10.10)?

  I bought an ADICON SSB audio analog digital converter (ssb-SEO).

  This device supports 44.1, 48, 88.2, 96, 176,4 and 192 kHz 24 Bit Audio sample class 2.0.

  Sampling by hearing works perfectly between 44.1 and 96 kHz. Soon, I have try 176,4 or higher, hearing said that the input and output device is not the same sampling frequency.

  Saying this, the Mac output device is the build in audio and is limited to 96 kHz. In my case, I do need nit an output device, because I want only to save my music in the highest available sample rates, transfer to the PONO of Neil Young player and want to be happy.

  Can someone help me solve this problem?

  Thanks a lot for your answer. Products like AUDACITY can enjoy Audio with 192,000 Hz and they also support listen-true. I'm a fan of ADOBE and do not want to throw my up-front investments.

  Hope you understand what I mean.

  BTW:, I'm an actor PONO and work with files without loss. Sample notes 192 kHz 24 bit and love the freedom to hear music.

• Recon GTC - How do I know how many records have been successfully treated?

  Hi all
  
  I'm under OIM11gR2 BP3.
  
  After running a recon GTC trusts:
  
  - How do I know how many records have been treated with success and failure of how?
  
  For example. My flat_file.csv has 1000 users.
  
  For this reconciliation specific execution 990 have been treated with success and failure of 10.
  
  Where can I find this information in the IOM?
  
  OBS. The event handler only gives me information on the level of event by event. Also, it does not inform what events belongs to which performs the reconciliation.
  
  Thank you
  ADR

  You can create your report on the RECON_EVENTS table. You will see columns like RB_KEY (Recon batch)< rj_key="" (recon="" jobs).="" there="" are="" few="" more="" tables="" with="" prefix="" recon_.="" these="" tables="" will="" give="" you="" all="" the="" information="" which="" you="">