How to recover previously received mail after you have reinstalled the software?
This question is similar to another, but there are key differences.
I had to reinstall Windows 7 (32 bit) on my laptop due to the corruption of several files. In doing so, I lost all the profile data stored on the computer and the backup that I produced prior to the relocation does not copy files App Data, even if given the instruction to do so.
I can see the files in the Inbox for each e-mail addresses that I followed, and by looking at the content of these files indicates emails dating from when I went to Thunderbird, but these messages are not displayed in Thunderbird itself. How can I get Thunderbird to display the details of the emails put into these INBOXs before reinstalling?
based on the 3 last lines. right click on the folder, select Properties, and then on the button repair.
Tags: Thunderbird
Similar Questions
-
The configuration of the fax fails after you have reinstalled the software
I have an Officejet J4680 AIO and for some reason the pilots disappered? then I reinstalled the drivers using the full software download. Now, the fax configuration will not say that the cordis phone connected to the "EXT 2" which is the way it works for years and it's that way because it is connected to a DSL modem and because the phone has an answering machine on it. That's how I was told to connect to HP tech and the cable operator. Now that I have re-installed the software, he spends more fax test. The telephone cable from the modem is connected to line 1 and the phone is connected from 2 - EXT because it has an answering machine. Can someone explain to me why this is happening?
Hello pwforever
I have a few articles that can help you. You receive specific errors or codes?
Fax on a PBX, ISDN or ADSL product or assistance with an HP all-in-one phone system
-
"There was an error downloading this update. Quit and try again later. "In the past, I had to contact Adobe CS5 was a problem with the upgrade, even if it was legal and had to press a few buttons and enter a special code generated at Adobe.
I'm on Mac with Yosemite
How can I get my software to update?
Daniel.e.Weber please download and apply updates directly from updates.
-
After you have uninstalled the trial version of Captivate on our shared computer, I signed up for try Adobe Captivate in my Adobe account. After the relocation of the trial version with my account it tells me there is 00days for me to try the product. Why?
If it is to be installed on the same machine that will explain why assuming you already exhausted the trial with the original installation.
-
How can I recover my old email after you have reinstalled Windows 7?
Under the direction of the MS Support, in order to solve a problem, I had to reinstall Windows 7. After installation, all my old email was absent. Support MS staff member told me that he was not trained to retrieve my email and sent me a link to try it on my own. I failed miserably. I managed to get a few email (Comcast) but only from the date of the re - install and none of my old stuff. In fact I managed to do it in triplicate. As you can see I'm not a computer person. Can someone help me? I need step by step instructions.
Thank you
Bill
Please see the next post to see if can help recover your e-mail:
How to recover Documents, music, and e-mail after the upgrade -
Microsoft Money 2004 cannot open my previous .mny file after you have reinstalled my PC!
I used a .mny file with my MS Money 2004 without problems.
After having reinstalled my PC (Windows XP) and reintall with the same version of money, when I tried to open my file it asks for my password but delivers so the following error (after trying to convert the file!): "money cannot locate 'path\file.mny' or cannot open, possible because this is the file read-only or you are not allowed to change or your hard disk is write protected".
Needless to say, none of these conditions are met. I tried to restore from a backup file, but the error was just the same.
His face wit agonizng this kind of problems in Microsoft products.
Can someone help me please?
Francisco
14.0.120.805 is no money 2004 Money 2005, and must be updated to 14.0.120.1105 if your old file is to open.
Right click on the shortcut to launch the money and select run as administrator. You need an update online at 1105 and this will allow money to install it.
-
How move to a specific folder after you have obtained the key to the pop list?
Hello
I have a non tabular form. I provided a Lov POP to display and returns the primary key of the table.
When a particular record is selected in the list, I want the page to pick up that particular line of the table and fill in the fields. It is an essential feature that I need in most forms, so use can easily pick any folder of choice.
Can someone help me?
Thank you
SEBHello
Create an element as a popup lov (: p1_key)
create a button to send the page to refresh the query (named query)
create a request that form where clause with the element: p1_key as a filteryou click on the context menu and have a value, and then click the named query button
and then you have filtered recording... -
I have reset my mozilla firefox. as I was in trouble, watch videos before you reset it, I downloaded mozilla but it had the same problem, so I reset it. the problem is after this new windos open in my default browser as shaadi.com etc... They annoy me a lot
please help to stop those windows from popping
Hello, this looks like a problem maybe caused by adware on your pc. Please go to firefox > addons > extensions and remove any suspicious entries (toolbars, the things that you have not installed intentionally, I don't know what purpose they serve, etc.). also, go to the windows control panel / programs and remove all toolbars or potentially unwanted software from there and run a full scan of your system with the security software you have in place and various other tools such as the free version of malwarebytes & adwcleaner.
Remove a toolbar that has supported your Firefox or the homepage search
Fix Firefox problems caused by malicious software -
Satellite A200-1AS - after you have reinstalled the blinking cursor
Sorry for my English.
Hello people
I have a laptop Satellite A200 - 1AS PSAE0E - 025006GR,
now, I wanted to format everything because I find very slow.Unfortunately I don't have the recovery cd not, and the 0 key does not work.
Also new vista dvd buy code (recover partition not resolved vista partition) fine. But when you restart all black blink single slider.
Downloaded drivers robson - unpacked 20070919162555.zip and during the next installation vista driver is loaded (which was eye appear as incompatible but no matter) Intel 82801 GR / GH SATA AHCI and still nothing...Could someone give me a tip?
Thanks in advanceThe robson - 20070919162555.zip driver contains the SATA driver in the folder
Robson Winall Driver packageYou will find the .ini, .dll files that must be added during the installation of Vista Setup.
But first you must make sure that the HARD drive is recognized in the BIOS (first page) -
After you have reinstalled the family system, xp, can't update to sp1?
Re installed OS, now can't update all sp1. Help
Hello
SP3 - download from http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=24
Don't worry about the bit of network installation in the text, it does the job for all environments.
Also, if you have already tried Windows Update, you pourrait have need to follow this link after installing SP for windows update to work
Tricky
-
Unable to reinstall vista ultimate upgrade disk after you have reinstalled the system
error "this disc is too old to reinstall" but I had it only for a few monhs
On your installed operating system Service Pack level cannot be greater than what is on the disk to upgrade.
Click Start > right click on computer > properties > system > it will tell you which SP you have install.
http://support.Microsoft.com/kb/948537
"How to uninstall Windows Vista service packs"
If the OS installed Service Pack 2 and Service Pack 1 upgrade disk > uninstall SP2 installed operating system > install the upgrade > reinstall SP2.
And run the upgrade of a Vista operating system.
See you soon. Mick Murphy - Microsoft partner
-
Re: Satellite A100 - after you have reinstalled the NIC is not appear
Hi guys
A friend reformatted my hard drive (100 satellite) and everything is good except the card network does not appear and it is preventing connect me to the internet.
Do I have to download the drivers for this problem, if so which ones?
Lost connectivity doctor, this is also downloadable. Is there anything else I need to do too?Thank you
DingoHello!
Yes, I think you should download the drivers for the network card. :)
Search on the Toshiba site. You will find all necessary drivers:
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download driversGood bye
-
body in title...
Hi gettaclue2002,
· What is the service pack installed on your computer?
· You have another outside Norton Security software?
Try the methods below:
1. I would say that you stop and start the service on the computer Security Center.
a. Click Start, click Run, type services.msc in the Open box and then click OK.
b. in the list of Services (Local), click on Security Center and then click Properties.
Make sure that you stop and start the service, then check if the problem persists.
2. you can also uninstall and reinstall Norton Security software, and check the results.
Link, please refer to: download and run the Norton removal tool to uninstall your Norton product:http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20080710133834EN&ln=en_US
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I had to reinstall my printer. When I click on the "print" button, a small window appears in the upper left corner of my screen that would show what was going on in print. When I reinstalled my printer, I lost this feature, & he would come back. What should I do to get this back?
It is usually a function of the software printer provided by the manufacturer. A little app like the following, a small applet popup for you tell the printer's paper, or to offer you the opportunity to buy ink.
These pop ups are very common with inkjet printers. Some popup only if necessary (you have low ink), while others appear whenever you print. These pop - ups come from the printer itself driver software
-
I feel myself neglected. Microsoft refer only to buy new ones. But when I got the real key to software and activation then why it is not answered correctly.
I formatted my HP laptop due to virus. Reinstalled by a few other cd seller but I want to leave it enabled properly by my real key. Please help regards.
How to activate Windows XP
http://support.Microsoft.com/kb/307890/en-usSee the section titled: "how to activate Windows XP by phone.
Also, make sure that you do not confuse the product key numbers and letters
(number 8 for the letter B, etc.)===================================================================
Blank page to activate Windows in the wizard of Windows Product Activation
http://support.Microsoft.com/kb/314935How to contact a Microsoft Product Activation Center:
http://support.Microsoft.com/default.aspx/KB/950929/en=usMicrosoft Activation centers worldwide telephone numbers:
http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
(This site is for activating Volume License, but if you call, they will help you)The phone number is not working:
Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspxOnce Windows activated / Genuine Advantage Notifications:
http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
(This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)J W Stuart: Http://www.pagestart.com
Maybe you are looking for
-
I always love this printer and do not want to give up yet. I was able to scan and save to PDF in the window 8 but after upgrade, I am unable to find a driver upgrade to be able to scan and save to the PDF format. I can only managed to save. TIF, PN
-
Impossible to get multimedia work center Audio/concentrateur USB 5.1
Hello I wonder if someone could help save my sanity... I used a laptop Toshiba Tecra A8 now for awhile with no problems. This forum works with Windows XP. I love it, its great, all except for one thing. I REALLY miss my Creative 5.1 speakers for list
-
A315 satellite - DVD does not recognize DVD
Having a problem with my DVD on my Satellite A315 drive. He will recognize CDs and data discs, but is unable to recognize the DVDs. When I insert a DVD, the disc spins like crazy, but nothing happens. If I go to Windows Explorer and try to expand the
-
Need driver WLAN Win7 for my Satellite P200-LD3
I just installed windows 7 on my Toshiba laptop (PSPB3C-LD803C and I can not find drivers for the laptop wifi as it was originally installed with Windows Vista. Anyone know where I can get drivers for Atheros CJ6PA3613WL wifi? Any help here on this i
-
SWR10 appears on SmartConnect but do not work or display settings
Hello I just bought a Sony SWR10 was trying to make it work with a Huawei Ascend P1 (4.4.4 Android), and even if I can get the Smartband pair, and it appears on SmartConnect, nothing appears when I click on the Smartband icon settings are not display