Impossible to get multimedia work center Audio/concentrateur USB 5.1

Similar Questions

• Impossible to get my work song go full screen. Worked well at the same time, and I click Ctrl

  I have windows 10 on a Lenovo laptop. I downloaded the images from the internet and using them as work for each song in iTunes. The use of ability "full screen" to work properly, but now it is (in gray), and I can't get the photos in full screen to come. The small images at the top still are appearing, but I no longer use (CTRL + left CK) to enlarge. Help, please.

  CTRL + click piece works here.

  Because you're running Vista what version of iTunes, you're running? You should be on 12.1.3.6.

  TT2

• Impossible to get apps working on Dev Alpha WebWorks

  I was not able to get any application WebWorks has been working successfully on my alpha dev device.

  I downloaded the bbjs.ui repo and you want to run a few samples. Therefore I replaced the WebWorks js with the last 1.0.1.17 file in the source for the project and made the index file to the new js file. Same thing as even the other sample applications, I tried.

  He goes to the grey start BlackBerry screen and is there, doing nothing.

  The construction is successful, but I have the following warnings:

  out: [WARNING] can't find the feature with id: blackberry.message.sms
  [WARNING]    Could not find the feature with id: blackberry.ui.menu
  out: [WARNING] can't find the feature with id: blackberry.system.event
  out: [WARNING] can't find the feature with id: blackberry.app.event

  Any ideas?

  Found the problem. Ripple has a bug long pending that deploys the bar Simulator instead of the bar of the unit regardless of whether the IP of the target is for a device or a simulator.

  See question on github: https://github.com/blackberry/Ripple-UI/issues/441

  Apparently be fixed soon. Disappointed but it was a problem open for more than 2 months.

  Until then, I'm exclusively command line to package and deploy.

• Impossible to get WebVPN working on chassis VPN 3030

  This v4.1.7P chassis works perfectly for our installation of the client vpn Cisco, no problem. We have decided to extend its usefulness by turning on and configuring WebVPN.

  I did it on a router IOS, Cisco 1841, works very well, so I'm following the same basic procedure to activate it on our vpn 3030.

  But when trying to connect to the vpn 3030 to the public interface of an internet ISP, I even don't get a login window, error, same no nothing. Finally the browser times out and stops.

  I did all the usual steps to enable WebVPN, yet nothing seems to work. I can't admin the box fine internally via https, so I know that work self-signed certificates.

  Any ideas where the attack of this of?

  Thanks, Jeff

  Hi Jeff,

  Try to upgrade to 4.7.x

  This generation of OS is fully operational with WebVPN.

  Check http://cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a008055641a.shtml

  You can ignore the Client SSL part and troubleshoot why didn't not now works for your environment.

  For a complete list of commands/options check:

  http://Cisco.com/en/us/products/HW/vpndevc/ps2284/products_configuration_guide_book09186a00801f1c6d.html

  Please rate if this helped.

  Kind regards

  Daniel

• Impossible to get Gallery working on the web server

  http://codadesign.NET/NewSite/design.html

  When you click the button on the design, the Gallery does not work. The thumbnails here, but when you click on it there is be a picture in full size at the top. Ideas?

  Your click audio file is not accessible.

  http://codadesign.NET/NewSite/sound/click.MP3

  It has not been uploaded to the web server or the file type is not allowed on the server.

• Toshiba Audio/concentrateur USB does not work on Equium A100

  I bought a Toshiba Audio/USB hub in March but only tried to install it today. Nervously, I followed the instructions. My Equium A100-related bits.

  The screen says "new hardware found". The Installation Wizard appeared, I clicked on cancel according to the instructions and inserted the installation disk. This produces a message to the effect that "met a hardware problem and the unit will not operate properly. The hub is now in its box.

  Is there anything reasonable I can do to remedy the situation? I have a Toshiba external connected to the laptop drive.

  Any notice received with gratitude by the novice.

  Hello

  You can try to download the LATEST drivers for this hub, because between March and are NOW many months and many updates have been released.

  Go here:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
  Search for an update and if a newer version is available then take it and try again.

  Otherwise, go to the store where you bought it and try with the replaced hub.

  Welcome them

• Impossible to get to work recovery disks

  I'm not 100% sure which series is my laptop, but I thought that it wouldn't really matter much since it should have the same type of system recovery.

  I have 2 recovery discs. The instructions are to insert disk 1 and on the power of the laptop to hold key "C" to "Toshiba" appears on the screen. I've done it 3 - 4 times and I'm not getting the Recover menu.

  All I want to do is restore my laptop to its factory settings.

  If anyone can help it would be greatly appreciated.

  -Hydranis

  Hello

  Are you sure you are using the right drive?
  Usually the old procedure of recovery supports two modes; standard and expert mode.

  But first you need to boot from the disk right.
  Maybe you should try first with the second drive if the first disk does not start the lining check it out.

  If you want to boot from the CD/DVD drive and press F12 key immediately after cell ahs been powered. Then you could choose the ODD of the start menu.
  The CD must be inserted and then the procedure should star upward!

• Impossible to get to work when exporting to PDF page transitions

  Hi all

  I tried to apply page transitions to a document that I realized. I tried to apply the two side of the cover and push passes to each Board in the booklet but when I export to PDF does not work with either, I've seen full screen in Acrobat Reader DC, DC Acrobat and Foxit reader with no joy. With this in mind, I think it might be something to do with how I export as much research, that I've done was referenced InDesign CS6 was so different from what I look at in InDesign CC. Can anyone advise me as to what I can hurt?

  Thanks in advance

  You use file > export > Adobe PDF (Interactive) the Page Transitions defined from Document?

• Impossible to get "rdcmndGotoSlide" work in CP4, but this market on the CP3, why is this?

  Hello!

  We have this project where we do some tutorial for this CMS with Adobe Captivate. I develop a videoplayer personalized to control the Captivate SWF files. I tried to make these buttons that the user can use to jump forward and backward between slides. All the tutorials are made with CP4. I tried to put the code rdcmndGotoSlide for buttons but it doenst work. I had a few tutorials CP3 earlier and tried to fight them with my drive and it worked fine! The thing is that the tutorials are ready but done under CP4 and I can't open the files with CP3 so that I could publish them with it and try if it will help. It's really annoys me because we have 2 weeks left and after that the project should be completed.

  You're welcome; (o)

  Good to hear, it worked. Be sure to mark your post as answered the other to take advantage of the solution as well.

  / Michael

• Impossible to get to work right tree

  I have written a sql to create a tree but I am now getting the error:
  ORA-20001: read_meta_data error: ORA-01436: CONNECT BY a loop in the user data
  
  Here is my sql

  select case when connect_by_isleaf = 1 then 0
              when level = 1             then 1
              else                           -1
         end as status, 
         level, 
         d as title, 
         null as icon, 
         r as value, 
         null as tooltip, 
         null as link 
  from (select 'Employee: ' || SUB_NAME d, SUB_NUM r, TASK_NUM parent from SUBTASK
         union all
        select 'Taskss: ' || TASK_NAME d, TASK_NUM r, PROJ_NUM parent from TASK 
         union all
        select 'DPI Projects: ' || PROJ_NAME d, PROJ_NUM r, null parent from PROJECTS)
  start with parent is null
  connect by prior r = parent
  order siblings by d

  Any help would be wonderful.
  Thank you
  
  Published by: KySarge1981 on August 17, 2010 14:32
  
  Published by: KySarge1981 on August 18, 2010 07:42

  You can try the NOCYCLE statement:

  select case when connect_by_isleaf = 1 then 0
              when level = 1             then 1
              else                           -1
         end as status,
         level,
         d as title,
         null as icon,
         r as value,
         null as tooltip,
         null as link
  from (select 'Employee: ' || SUB_NAME d, SUB_NUM r, TASK_NUM parent from SUBTASK
         union all
        select 'Taskss: ' || TASK_NAME d, TASK_NUM r, PROJ_NUM parent from TASK
         union all
        select 'DPI Projects: ' || PROJ_NAME d, PROJ_NUM r, null parent from PROJECTS)
  start with parent is null
  connect by
   NOCYCLE
   prior r = parent
  order siblings by d
  

  But first you have to find whence this loop.

  Kind regards
  Lev

• Impossible to get to work with HP Laserjet Pro CM1415fnw Airprint

  I recently bought the HP Laserjet Pro CM1415fnw and installed on my wireless network.  He appeared for updating the printer software, but none of my iPhones or iPad can find all printers on the network.  Help, please.

  The 1415, you download an application that runs on your computer and then installs the new firmware in the printer. You can find this program firmware here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=us&product=4089468&

  I hope this helps.

• Impossible to get a sound, message no Audio output device is installed, download message that some adapters do not work with error 31.

  Original title: get a message "No Audio output device is installed".

  Worked very much later than last night - pop up on the taskbar during the night - had earlier this week, but a reboot can fix this - now stuck - Machine is HP Pavilion dv2736us - I tried to reload the sound driver from the HP site - says NO Available MEDIA - device also device manager says 6TO4 and a bunch of other "adapters" works do not (Code 31) - is this a MS or HP problem? -Help appreciated - Tks - has

  Hello

  1 did you do changes on the computer before the show?

  2. What are the other devices for which you receive the error code 31?

  Addressing the issue with the sound:

  Method 1:

  See the site:

  Error in Vista: No Audio output device is installed

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01695430&cc=us&LC=en

  Deal with the issue with message on 6T 04:

  Method 2: Update the wireless drivers

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Method 3: Install the latest drivers wireless

  You can get the latest driver wireless on the site:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3650837

  If the problem persists, I suggest you obtain help on the site of HP support forum: http://h30434.www3.hp.com/t5/Notebook-Computers/ct-p/Notebook

• Error message try install drivers for Toshiba Multimedia Center Audio/USB Hub

  Hello

  I use a Toshiba Satellite P100-102 and a Toshiba Multimedia Center Audio/USB Hub SB0500 with the new Windows Vista Ultmate.
  When you try to install the drivers for the multimedia center the following error message appears:

  A service install article this INF is invalid.

  I also tried to install the Center Multimedie with the installation CD, but it doesn't, because the installation program could not identify the USB hub even if the USB cable is connected to the Media Center and the laptop.
  I also tried to find drivers for Vista on the Internet, but without success.

  How can I solve the problem?

  I would be really happy if you could help me!
  Thank you!

  You are 100% sure that this driver was designed for Vista?
  Maybe it s is not compatible with the new Vista operating system and it works only with XP

• Satellite P200 - 1 K 8 - could not get the display and audio drivers to work

  Hello.
  I'm getting desperate. I tried everything I could imagine.

  First of all - do not get the control center catalyst to work, I don't have the graphics driver installed now (I tried both - Toshiba and Mobility Modder modified driver ATi - none works.)
  Second - when I install the audio driver Realtek audio Manager is encoutering the problem and needs to close every time at startup. And Yes, I updated the BIOS to version 5.20 installed XPSP3, chipset driver installed (the most recent Intel homepage or one of Toshiba, anyone, always the same question).

  Help, please. I don't want to spend the rest of my life trying to get XP on my laptop.
  Thanks in advance.

  Can you please send the number of full model of your laptop?

• When you try to watch tv in Windows Media Center, I get black screen and audio sometimes and sometimes does not.

  Black screen in Windows Media Center during the TV

  When you try to watch tv in Windows Media Center, I get black screen and audio sometimes and sometimes does not. Any fix for it?

  TV works on the other program I have and has been workign on MC last week, but now I don't?

  Some success with this issue (its OK, but BLACK) video for live/recorded TV

  ' 1) ' disabled ' tuner card (Ati HD 650 PCIe) TV [via right click] in the Device Manager
  (2) restart Win7 64-bit
  (3) Win7 located & reinstalled the drivers
  (4) VOILA!   Real video and audio live & recorded TV

  BTW - before above fix in Device Manager:
  Notice anything in his video & Game Controllers
  'Properties' reported 'this device is functioning.
  "Update drivers" reported "... software driver...»
  ... and no updates of WMC anywhere in sight

  Go figure!