How to reduce an image of 1600 * 800 to 200 * 200? and to expand it?

Similar Questions

• How to resize an image using PIXELS to define the width and height?

  I need make my image a certain number of pixels wide and high.  When I resize image I can't change the area that shows the pixels of width and height, and when I drop down lists it does not give option pixels.  When I choose "points" and "Pica" they are obviously not other names for the pixels because the given number is not the number of pixels above.  I used to be able to do it EASILY in elements 2.0, my previous version of elements.  I am now using 8.0.

  In fact, I just realized that nothing that I in image resize will change the number of pixels at ALL in question.  Size and pixel per inch are locked permanently in relationship to each other.  I had to download a new version not long because my computer hard drive has failed, and I think they changed the things that work so not now, because I would have noticed it before now if it's that way when I downloaded originally from that.  I begin to fear that I'll have to kludge with the crop tool, even if the resizing of the image SHOULD be able to.

  Make sure resample is checked:

  

• How to reduce an image?

  I'm looking for a tutorial on how to shrink and the image.

  So what I what to do is on the home page there is a big logo main when the page scrolls down it will move to the upper left corner (I know how to do this) then is will also shrink down or scale of a smaller image and then I'll get as sticky header. So let's say the logo is 350 x 250 and I want to cut it up to 150 x 75.

  Hope that makes sense... How can I achieve this?

  theDogger

  You can use animations with spirals, or place with the installation of scrolling image so that when the Page is scrolled down to a specific location, then the big logo hides on the page and small logo appears which can be done using movement of scrolling.

  Thank you

  Sanjit

• How to reduce an image online?

  A beginner question, I suppose, but I can't find the answer.

  I have an image of small line in the middle of a line. The lower edge of the image is on the baseline, but I need to lower the image slightly under the base level. I have searched for this in the character style, but have not found. How can I do this?

  You have two options. Select the image with the text tool and you can treat it as any character, which means that you can apply the vertical offset, or a character style that applies the vertical offset. Use the selection tool to select this option and you can use the arrow keys or the mouse to move it upwards or downwards.

• How to export the images from the Collection as a catalog and then merge with another catalog?

  How to transfer a version edited photo in a single LR catalog to a new LR catalog that has no editing.

  Tip! The Lightroom Catalog is a database file and contains no actual photo files, all it contains is information about the files that you have imported and info on the work you have done with the original image file.

  Please provide information on what you are trying to reach.

  The normal workflow is to create a catalog of the original files and then you can have virtual collections, smart Collections, Copies to make alternative options.

• How to display JPEG images only in a catalogue of ships and JPEG?

  Hey all,.

  I know that I have a very special case, but I hope I can achieve what I need.

  I manage a large database of photographs for a University. We work with freelancers and in-house photographers. Over the years, the University has had different systems regarding how to approach photography and I try to meet a standard for archival purposes.

  Use us Lightroom for photo management, not editing or import. I use Adobe Bridge and Camera Raw. Because of this workflow, we have a sophisticated file system organized by dates.

  As a sample, a tree view of file may look like this: C:/Photo/2015/201511_November/20151120_Event_Name/HR_JPEG /, with the final folder containing JPEG files high resolution for our customers throughout the University. In the HR_JPEG parent folder, we store the RAW files.

  Is it possible to import a catalog of several file like this and then only display JPEG images (be it through a filter or another method)? Our files JPEG is the pictures get to choose as 'approved' and it would greatly accelerate my workflow if, when you search for photos, I would need only to sift through the JPEGs and not pictures of duplicates or rejected.

  Thank you!

  David.

  Apply a metadata search filter, is another method.

  1. Select the folder of images to see. This could be "All photographs" in the Navigator Panel. A single file or several files - (Hold [Ctrl/Cmd] when you choose multiple files - as in the picture)

  

  2. click on [Metadata] at the top of the grid view

  3. place the cursor of the mouse on a column header, click on the arrows for menu drop down, choose [file Type]

  

  4. in this column, select "JPG" (and "all photographs" in other columns of metadata.)

  

  5. you can "lock" the filter to show only jpg files when you change folders by clicking to close the lock. Normally, the filter turns off if you select another folder.

  

  6. you can also save a "preset" search choice to use at any time in the future, by clicking on the arrows next to [no filter] and the padlock.

• Does anyone know how to crop an image in alternating vertical lines (1px apart) and combine them?

  Hey guys! I'm having a hard time to create a custom image for my research project and I was wondering if you guys might lend a hand .

  For my project, I want to take a picture that is 1920 x 1080 and alternating lines of cultures (1 px outside) and then combine them in 960 x 1080 picture.

  Is this possible on Adobe Photoshop? I need to make at least 100 images of this size.

  Thank you!

  I appreciate if you could help me.

  Try this script. He actually chooses a wide band of 2px, but he moves so that they overlap, and you really get a pixel in the final version. There is a bug with PS script than the mess to try to move a layer of a pixel. I'll have to report it. Save the code in a simple text with the extension .jsx below file. Place it in the subfolder of Photoshop Presets\Scripts. Restart Photoshop and it should appear in the main menu > file > Scripts. You can call it as you want. Here's a sample:

  #target photoshop
  
   var doc = activeDocument
   var curLayer = doc.activeLayer
   var odd = 0
   var count = 0
   var sWidth = 0
   var dLayer = false
   var dlg = new Window('dialog','1 PX')
      dlg.even = dlg.add('radiobutton',undefined,'Even');
      dlg.odd = dlg.add('radiobutton',undefined,'Odd');
      dlg.even.value = true;
      dlg.ok = dlg.add('button',undefined,'Ok')
      dlg.ok.onClick = function(){
          if(dlg.even.value){
              odd = count = 0}
          else{odd = 1
              count = -1
              }
          dlg.close()
          makeSel ()
          }
      dlg.show()
  
   function makeSel(){
  
      for (var i = odd;i
  		   

• BlackBerry Z10 reduce an image file to be attached to an e-mail message on a new Z10

  Hello there, recently got a new Z 10, love it by the way.   Does anyone know how to reduce the image files that you take with the Z10 to attach one or more to an e-mail message.   There is no prompt in the options to reduce the size and the process that notifies you that the files are in the large shipment.  I tried all the visible change icons popping up, but none of them are associated with the reduction of file.

  I would appreciate a well-informed response.

  Thank you, Joseph

  the picture in the z10 editor does a great job with Cup, effects, sharpness, etc.  but there is no re-size. There are two or three free photo editors in appworld that accomplishes this task for you.

  http://supportforums.BlackBerry.com/T5/BlackBerry-Z10/change-picture-file-size/TD-p/2168885

• How to merge 2 images

  Hi, I'm very new to photoshop.  Can someone tell me very simply how to merge two images together.  I'm an artist and I have a picture that is too large for my A4 scanner.  I scanned in two parts, but how I put together them.  I had a search for tutorials that talk to me only to create a panorama.  Thank you

  

  Assume that Fig 1 is your art.

  1 sweep half as superior of art; then further analyze the half of art (Fig 2 & 3)

  2. create a new file large enough to hold the art of full size. It's ok to make it a little bigger

  3. Select > copy and paste the top and bottom images into your new file. They overlap and not line up. (Arrow fig. 4, note)

  4 use the move tool, or choose the move with the arrows on the keyboard tool to coax the two segments in alignment (Fig 5)

  5. If necessary harvest and female t flatten layers

• How to reduce the size of an image to send as an attachment to e-mail

  Sending photos as attachments to emails

  How can I reduce the size of photos for me to email it more?

  How can I reduce the size of photos for me to email it more?

  ===============================================
  In Windows Live Photo Gallery... Select (highlight) an or
  more inches and left, click the e-mail button in the toolbar...
  The "Attach a file" dialog should open and you can choose
  one size by opening the drop window "size of the picture.
   
  Also... in Windows Live Photo Gallery... Right click on one or more
  selected inches... Choose... "Resize" in the menu. Choose
  one size, navigate to a folder to save in left click the ' resize
  Save "button. (I suggest that you save the resized pictures
  in a new folder to prevent the replacement (replacement) the originals)

  Take a look at the following link:

  Resizing Photos in Windows Live Photo Gallery
  http://blogs.msdn.com/PIX/archive/2007/11/30/resizing-photos-in-Windows-Live-Photo-Gallery.aspx

  And... you'll love the next free loop:

  VSO Image Resizer - (Windows XP/Vista/7)
  http://www.VSO-Software.fr/products/image_resizer/

  VSO Image Resizer (tutorial)
  How to resize my images and photos?
  http://www.VSO-Software.fr/products/image_resizer/how-to-compress-photos/how-to-resize-images-Guide.php

  Prish Image Resizer - PowerToy for Windows XP/Vista/7
  http://prishcom.spaces.live.com/blog/CNS! 6A6A204ABDF15411! 128.entry

  
  Prish Image Resizer tutorial)
  http://www.Winhelponline.com/blog/Prish-image-resizer-PowerToy-Windows-XP-Vista/

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to reduce the size of an image

  Hello

  Here is my link

  http://BHC.edu.in/GJC/index.html

  Its loading very slowly. I think that the problem would be in the picture. How I could reduce his image of good quality size but have. I tried in photoshop by using ' Save as web. But the quality is not that much good. And as the site loads slowly.

  How can I solve this problem? Please help me.

  Thanks in advance.

  Your images are huge - I downloaded choir.jpg-5456 x 3632 pixel to reduce the pixel dimensions to save for Web.

  When it is maximized on your web page, the images appear about 1336 pixels wide, so I suggest you use this width.

  Quality 60 will be sufficient in most cases. Also be sure to check the Embed profile and convert to sRGB.

  See screenshot below.

  

• How to reduce the size of the font of the images on the screen?

  I don't know how I did it, but the images on my screen are very big and I don't know how to bring them back to normal.
  I understand that it is good for people with visual impairments.

  Try this:

  Right-click on your desktop.
  Choose Customize
  In the left pane of personalization, click on 'font size to adjust it (CIO).
  Click 'Continue' on the control of user Accoount
  On the scale of IPR, check on the option button before 'Default scale (96 DPI) - fit more information'
  Click 'Apply', and then the buttons "OK".

• How to stop the image automatically re-sizing of a sequence

  I have a sequence CS5 as of:

  HDV 1080i and 25 f/s

  It is therefore 1440px by 1080px and the aspect ratio is 1.3333

  I have an image in the project which is 1600px x 1067px

  And when I pull on the sequence it is automatically reduce my image to the size of the sequence...

  How can I stop it this?

  Sorry if it's super simple

  Thanks, victoria

  Ah, brain lapse...

  Even if the dimensions of your HDV clip are 1440 x 1080, full frame, it is actually 1920 x 1080. So, your file 1600 x 1067 (probably with square pixels) is going to 'float' in the middle of your monitor for the program. You will have to step up or redraw your chart to be at least 1920 x 1080 with square pixels (or 1440 x 1080 with a 1.333 NORMAL) to completely fill the screen.

  Note that you cannot interpret just your 1600 x 1067 with a NORMAL 1, 333 - well, you could, but you will get stretching distortion.

• How to reduce the amount of storage to free up more space

  How to reduce the amount of storage to free up more space

  There are several things you could do.

  Save your iPad to iTunes on a computer or create an iCloud account, find out how much storage space you need for data and if you need to buy storage space monthly, to do. Then save your iPad to iCloud.

  HOWEVER the data backup on your iPad using WiFi or Bluetooth wireless, local devices such as portable hard drives or small flash memory drives designed for use with mobile devices, like the iPad.

  Remove the applications that you use is no longer. If you start to use them in the future, you can re-download them the iOS App Store.

  Thin out / remove the amount of music and movies you have on your iPad.

  If you make a backup of your iPad, you can thin out / delete all images stored in the iOS App Photos.

  Thin out / remove all books electronic, iBooks, eMagazines, and PDF documents, you have stored on your iPad. Magazines and e-books can be redownloaded at a later date.

• How to cut an image to several party's limits.

  Hai me Barach... im making robot in library. the vision of the robot system is so very important. How to segment or to reduce an image into several parts of cunning edge detectors (which limits image) of the King... im using vision assistant this work... here, I download the image... give someone idea please comment...

  Hello

  Have you tried using 'IMAQ find brods 3.vi' ("Stirrup" under LabVIEW or "Advanced straight edges" palette in the Vision Assistant)?

  It should allow you to detect each vertical edge of the book.

  Select a rectangular KING, in the middle of the image (above the book request numbers), then search for the vertical brods using 'the left toward the right direction. "

  Please see screen capture from the Vision Assistant, attached.

  Best regards.

  JC Benoit

  The vision engineer

  Alliance Vision

  www.AllianceVision.com