How to reformat or restore the initial configuration of a toshiba laptop with vista WITHOUT a disk as my hard drive is defective

Similar Questions

• I have a toshiba laptop with vista, somehow, I managed to move the taskbar from the bottom to the side, I want to put down once again. How do I do that? Thanks in advance

  I have a toshiba laptop with vista, somehow, I managed to move the taskbar from the bottom to the side, I want to put down once again.  How do I do that?  Thanks in advance

  I have a toshiba laptop with vista, somehow, I managed to move the taskbar from the bottom to the side, I want to put down once again.  How do I do that?  Thanks in advance

  First, make sure the taskbar don't are not "locked"...
  Right-click on an open space of the taskbar > make sure there is no checkmark at "lock the taskbar".

  Now, make a left click inside of a space open to the taskbar and HOLD > drag the slider down until he goes back down > drop PREY > lock the taskbar. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• How to change the parameters of program on Acer laptop with Vista installed

  * original title - is something wrong with my hardware or is it me? *

  A year ago, I got this acer laptop with windows vista installed. Even when my microsoft word product ran out--I never could find the keycode - my phone still worked well enough, connection to the internet very well, are not slow or anything. I left my laptop at the home of a relative for almost a year and let their (and the other 2 people out there) to use. It worked fine when I come into their home and used - I forgot to bring it home with me - and I recently picked him up two weeks or two it y a. still, it connects to the internet, but I have problems to open all programs other than the control panel (the games, microsoft, Notepad, inkball (, basically everything that was already about this or even downloaded), because it always appears with and 'open with', program that was never on the computer before I reported. And when I try to open the program with its own program or any other thing, it won't work at all. And I can not change the open with screen because I have no idea what to do! Help, please! It's driving me crazy! Thanks to everyone who helps me with a viable answer!

  Thank you!

  Renee Meister

  A year ago, I got this acer laptop with windows vista installed. Even when my microsoft word product ran out--I never could find the keycode - my phone still worked well enough, connection to the internet very well, are not slow or anything. I left my laptop at the home of a relative for almost a year and let their (and the other 2 people out there) to use. It worked fine when I come into their home and used - I forgot to bring it home with me - and I recently picked him up two weeks or two it y a. still, it connects to the internet, but I have problems to open all programs other than the control panel (the games, microsoft, Notepad, inkball (, basically everything that was already about this or even downloaded), because it always appears with and 'open with', program that was never on the computer before I reported. And when I try to open the program with its own program or any other thing, it won't work at all. And I can not change the open with screen because I have no idea what to do! Help, please! It's driving me crazy! Thanks to everyone who helps me with a viable answer!

  Thank you!

  Renee Meister

  http://www.ehow.co.UK/how_5804857_set-file-associations.html

  and

  http://www.vistalessons.com/set_default_programs_vista.htm

• I downloaded service pack 3 and it changed and took some of my programs.how can fully restore the initial configuration and start over?

  I downloaded service pack 3 and it changed my programs taking some. How can I reset and delete and go back to factory settings and start over?

  Hi Daddyguy,

  Please read this article which gives detailed instructions on how to restore Windows XP to a previous state. http://support.Microsoft.com/kb/306084

  I hope this helps. Just reply to the results.

• During the initial installation of a new laptop with the software of Windows 8, I misspelled my email address. How can I change the e-mail address?

  So that the implementation of a new laptop computer with software of Windows 8, I accidentally typed in my wrong email address.

  What are the steps I have to take, in order to have the e-mail address not changed to reflect the right pair?

  Any detailed help will be greatly appreciated.

  So that the implementation of a new laptop computer with software of Windows 8, I accidentally typed in my wrong email address.

  What are the steps I have to take, in order to have the e-mail address not changed to reflect the right pair?

  Any detailed help will be greatly appreciated.

  First of all:

  Switch to a Local, the switch back to a Microsoft Account account:

  You can choose between using your Microsoft Account or a normal user account by going to all PC settings, to the users section. :
  (1) immediately move your mouse to the lower right of the screen until the left menu appears, and then clicking settings (gear icon).
  (2) from there, click on the link "Change PC settings" at the bottom right.
  (3) now, you should be on the menu of the full-screen PC. On the left, go to the section "users."
  (4) on the right side, it will show you your current account with a button that says "switch to a local account. Clicking on this button and following the steps you will be able to sign in to Windows as you do with all other versions of Windows such as Windows 7, Vista, XP, etc.

  Then:

  Switch to Microsoft account using the new address:

  You can choose between using your Microsoft Account or a normal user account by going to all PC settings, to the users section. :
  (1) immediately move your mouse to the lower right of the screen until the left menu appears, and then clicking settings (gear icon).
  (2) from there, click on the link "Change PC settings" at the bottom right.
  (3) now, you should be on the menu of the full-screen PC. On the left, go to the section "users."
  (4) on the right side, it will show you your current account with a button that says "change your Microsoft account.

  Once you have configured your Microsoft account (it takes a Windows Live ID (Hotmail or MSN) account.

• Messed up the initial configuration of Win Vista on Satellite L40

  I can only think that I messed up when performing the initial installation of Vista Home Premium on my new Satellite L40.
  I finished to the high withComputer\Vista C:\Users/comet containing all my stuff AND - outside of Vista C: - a full mirror in Desktop/Chris...
  Can someone tell me if I can return to the initial configuration screen and how?

  I tried to back up the directories and then delete them and you try to restore a single directory, but the other reappears too!
  I'm obviously a complete dunce so please do not forget that and keep your simple instructions!

  If anyone can help then anyone know a number 0800 for Toshiba Technical Support?

  Thanks in advance.

  Hello

  What s your problem exactly? You can start the Vista?
  If so, what you want to change it or not?

  If you can not boot Vista and then take your Toshiba Recovery DVD and try to reinstall it again

• How to plant to restore the HP Envy M6

  My friend has an HP Envy M6 - 1114tx with the real OS WIN 8 round, how to facetory to restore the operating system

  Hello

  There are three main ways to restore your laptop to its 'Condition of the factory' - see the document at the link below.

  Performing a HP System Recovery - Windows 8

  Kind regards

  DP - K

• Accidentally selected 32-bit instead of 64-bit to the initial configuration

  I chose accidentally 32-bit instead of 64-bit to the initial configuration. The computer (Satellite L630) came with a disc. If I create a recovery disc it will allow me to select 64-bit or it will create just once for a 32-bit system? Is there another way that I can return to the initial configuration?

  What model of laptop you have (L630-xxx)?

  Create recovery DVDs and test. You should not wait for a response, just to test it.
  You can also try to start installation of recovery of HARD drive, just to see what will happen.

  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

• How to install xp home edition on the series 1000 HP from PC laptop with AMD processor

  Help...

  How to install xp home edition on the series 1000 HP from PC laptop with AMD processor.

  Thank you very much...

  Hello:

  Please read the info below AMD...

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

  I have attached the drivers that you need wake under attachment below...

• I have Photoshop CS5.1 Extended with free upgrade to CS6. How do I re acquire this upgrade?  I upgraded my laptop from Vista to Windows 7 and had problems with the way he ran I did a full clean install of Win 7 and am trying to re install all my

  I have Photoshop CS5.1 Extended with free upgrade to CS6. How do I re acquire this upgrade?  I upgraded my laptop from Vista to Windows 7 and had problems with the way he ran I did a full clean install of Win 7 and am trying to re install all my Applications

  Please refer to I have Photoshop CS5.1 Extended with free upgrade to CS6. How do I re acquire this upgrade?  I upgraded my laptop from Vista to Windows 7 and had problems with the way he ran I did a full clean install of Win 7 and am trying to re install all my

  (Double Post)

• My new Mac does not have the CS5 download, how to get around this problem?  I have th dvd however my Mac Pro doesn't have a hard drive.

  My new Mac does not have the CS5 download, how to get around this problem?  I have th dvd however my Mac Pro doesn't have a hard drive.

  Download from products of CS5 download

• Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  This has two questions:

  1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

  2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

  3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

  Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

  The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

  Then there is the BootCamp partition on the HARD drive partition #2.

  Is there a way to get what I need?

  That is what has been described in this notice of two canoes?

  Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

  n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

  Thank you.

  After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

  Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

  A. take backup

  1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

  B. fuse out of the merger in two physical disks drive: SSD + HDD

  1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

  Cs diskutil list

  2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

  I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

  Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

  and repeat for disk1/dev/disk1 which is the HARD drive in my case).

  This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

  2 create independent partitions (non-fusionend) for the installation of OSX.

  Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

  3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

  C. install on the HARD disk as drive didier autonomous not fusion.

  1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

  D. use BootCamp Yosemite f5 to install windows.

  1. launch Yosemite bootcamp.

  2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

  3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

  4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

  -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

  -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

  -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

  5. open Boot Camp Assistant again and only select the third option, install Windows 7.

  It will show you the screen to select what installation disk, select HARD drive.

  Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

  For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

  Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

  6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

  7. once the installation is complete, check that windows is functioning correctly.

  E. Si you want to upgrade to windows 10 Windows 7.

  1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

  2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

  F. reinstall OSX El Capitan

  Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

  1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

  6 type the 'diskutil list' command to list all disks and partitions.

  The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

  The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

  G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

  1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

  Cs diskutil list

  6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB SSD 121.0 disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS 1.7 Untitled TB disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 503.0 GB disk1s4

  5: Apple_HFS 801,4 Untitled GB disk1s5

  8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

  diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

  Note: Mark the group id of logical volume shown in the results.

  In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

  So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

  9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

  diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

  10 command "diskutil cs type list" to check the resulting fusion drive created.

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

  =========================================================

  Name: LVG

  Status: online

  Dimensions: 1815635525632 B (1.8 to)

  Free space: 90112 B (90.1 KB)

  |

  +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 1694646673408 B (1.7 to)

  |

  +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1809780178944 B (1.8 to)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

  12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

  13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

  14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

  15. yet once please take personal responsibility on damage if you follow the instructions in this article.

• I bought a laptop with vista and I was told I have to upgrade to windows 7 free. How do I do that?

  I bought a laptop with vista and I was told I have to upgrade to windows 7 free. How do I do that?

  http://www.Microsoft.com/Windows/buy/offers/upgrade-option.aspx

  Above Microsoft link has info for the Windows 7 upgrade Options from the various participating computer manufacturers.
  Read the info here to see if you qualify.

  http://www.Microsoft.com/Windows/buy/offers/upgrade-FAQ-option.aspx

  FAQ about the upgrade is at the link above.

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  Railways upgrade to Windows 7 at the link above.

  For any other question of Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 forum for questions on windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• If my laptop broke & I had to buy a new hard drive, how to make Windows 7 on it? Do I have to buy a disc?

  My laptop broke & I had to buy a new hard drive, how can I get Windows 7 on it? Do I have to buy a disc?

  If you create recovery discs when you got the computer, you will need to ask the manufacturer for their recovery disks.

• I can not install the KB2530548 update on laptop with Vista SP2

  I use a laptop with Vista SP2 - cannot update and install the following KB253 548 and switch of IE8 to IE9

  Hi DericKemp,

  1. what happens when you try to install the update?

  2. you receive messages or error codes?

  You can check which version of Internet Explorer is installed on your computer.

  Find out what version of Internet Explorer you are using

  Step 1:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  Step 2:

  You can also check out the following link and try to install the stand-alone update package.

  A security update cumulative for Internet Explorer 9 on Windows Vista (KB2530548)

  Hope this information is useful.