How to reformat Satellite A50 112?

Hello
Can someone tell me how to reformat a Toshiba Satellite A50 112
Thank you
Gazza

Hi Gazza,

To reformat your laptop, you must insert the recovery CD into your optical drive and restart the laptop computer while pressing the C"" key. This will cause your laptop boot from the recovery CD which will then launch the process of re - install.

Note that this process will be completely reformat your laptop and go back to its original state with the loss complete of the any of your own data and programs not original. Please make sure that you have a backup of your data before doing this.

Kind regards

Tags: Toshiba

Similar Questions

  • What memory uses the Satellite A50 112

    My wife has 'lost' the paperwork on this model and need to know the specifications, can anyone help?

    I think that should help you:

    Have a look here:
    [Memory for Toshiba Satellite A50 112 | http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=26424&ft=m&st=3]

    You must use the 200-pin PC2700 (333 Mhz) DDR SODIMM

  • Satellite A50 112: registration problems

    I have a type of satellite SA50-112. When I chose to save my laptop with toshiba this type does not appear in the list. Any ideas?

    Hello

    After a few problems with the registration, I got some info from a Service partner.

    There are toshiba serveral registration Web pages. You have to find of the Toshiba site specific to the country, where your laptop has been purchased. On this site you may register your laptop.

    Another tip: If you take a look at the warranty booklet (it has been delivered by your laptop) there is a full explanation on registration!

    It should help you!

    Bye Bob

  • Satellite A50 112: F1 not work key to enter the Bios

    My toshiba Satellite-SA50-112 do not enter in the BIOS or CMOS settings because of the F1 key is not working what I can do to change the boot sequence for CDROM in an alternative way.
    Please help us to work better

    Hello

    I hope you had success with the start-up of the device with a bootable CD/DVD, but it will be interesting to know is F1 key works well under Windows operating system.

  • How to reformat Satellite L640

    Hello... I'm john julius... I have a question, please answer as soon as possible... how reformat toshiba satellite L640 using a c/dvd? and what is the start menu default settings, when I click on the f12... thank you and GodBless

    If you have recovery DVDs or if you want to use Microsoft installation disc start Notepad and press F12 to get into the boot menu. When the boot menu appears on the screen, place the recovery in the optical disc drive disk, choose CD/DVD in the menu and press ENTER.
    ODD will start to read the installation disc, and you need to do is just follow what's happening and menu on the screen.
    > what is the start menu default settings, when I click on the f12
    There is not a kind of default settings. When you use F12, you will see listed bootable devices.
    If you want to define which device must be the first or second botable feature you must do it in the BIOS settings.

    If you have any other questions you are welcome.

  • How to reformat Satellite C660?

    Hi all

    My C660 is just over a year & slowdown etc, I thought I'd reformat it with the 4 discs recovery I did when I got it, the problem is, for some time now, the cd/dvd drive does not start as soon as a disc is inserted, & I have to open it manually. In any case, I put the first disc of recovery in & as usual nothing happened, I'm going to 'My Computer' & open from there thinking it would start to do what its supposed to, he did nothing but open & view what's on the disc :-(

    How do I get it to work so I can go through the other 4 disks & redo my lappie like new?

    Start your laptop and press F12 to get into the boot menu.
    When the boot menu appears on the display open optical drive and put the first disc inside.
    Choose the CD/DVD drive on the list and press ENTER.

    ODD will start to read the data stored on the disk and recovery facility should begin. It starts with the main menu.

    How it looks like you can see on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
    Just follow the menu and proceed with the installation.

    If you have any other questions you are welcome.

  • Need recovery disc for Satellite A50 112

    Hi I lost the recovery disks for my computer toshiba SA50-112 model num = PSA50E-00E00T7H
    Is there anywhere I can download files/disks?

    Hello

    There is unfortunately no server download where you can get the images. You will need to contact a partner of service approved for the recovery disks.

    To find one that is closest to your country, you must visit the following link:

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

    Welcome them

  • How to reformat Satellite L645-S9412D using the recovery media creator?

    This is my first laptop and I do not know. I already burn disc of recovery media creator, but I don't know how to use it. Could someone teach me how to? Thank you. And yet something, do I have to re - install the operating system when I used the recovery disk?

    Thank you for your help... :)

    With recovery disk, you can install recovery image and game for laptop to factory settings. Please note: when you do this backup data will be deleted so before that, you back up all your important data.

    When you want to use the recovery disk to do on this way:
    Start your laptop and press F12 to get into the boot menu
    When the start menu is shown on the screen, place the recovery in the optical disc drive disk
    Choose the CD/DVD in the menu and press the ENTER key
    Just follow the menu on the screen.

    Do it, test it. Check alone, how it works.

  • Satellite A50-522 - how to remove BIOS password?

    Hello

    I have a Toshiba Satellite A50-522 of Spain and there a startup password.
    How can I recover the password? Or how can I reset the password to start?

    Thanks in advance!

    Hello

    It is not possible for a common user if the BIOS password is unknown.
    You will need professional help of Toshiba ASP in your country.
    Only the ASP technician can remove this!

    Good bye

  • Satellite A50 - BSOD - how to change wireless network card

    Hi all, I have the same problem,.

    I tried with several hard drives and the same thing, always the BSOD before connection in the window, just once I could stay for a while in windows.
    So I decided to install a win XP pro edition, a new facility, not a recovery system, and it worked fine, I started to install all the drivers from the support cd and when I get wireless driver, I myself agais BSOD, so I tried to restart the power off of the radio and it works perfectly.

    So, try to disable your wireless card and say here what is happening.
    Now, a friend of mine gave me his old satellite A50, because he got a new one, and its screen is broken, so I could try to change the wireless card,

    Could someone help me how to put an end to the black and white wires that are in the jury of the ipw2200?

    Thank you for all.

    Thanks for the comments!

  • How to configure the BIOS to boot USB on Satellite A50-110?

    Hello.
    I own a Toshiba Satellite A50-110 and I have a USB bootable Flash drive, but I don't know how to boot from the USB key.
    I guess I need to access and configure the BIOS. How can I do? Where can I get information on this subject? What are the steps to perform this task?

    TIA

    Hello

    As far as I know in the BIOS cannot be configured anything. As much as I now on this old notebook you can use just USB floppy for boot drive (U key at startup), but not the USB flash drive.

    Enter BIOS settings with the ESC key at first upward and check that all listed bootable devices.

  • How to replace the RTC (CMOS) battery in the Satellite A50-452 (PSA50E-01700WGR)?

    I need to replace the Satellite A50-452 CMOS battery, but can't find any instructions online on how I would go about this procedure. Does anyone know how or where I could find instructions?

    Thanks in advance for any help.

    Manual maintenance is not public record, so you can not find it for download.
    Here in the forum isn't easy to post description step by step how you can disassemble your laptop and there are always risks that can damage some small piece of plastic or plastic media.

    I put t really know what to say. Try to use google and find a page where you can find a description how to do this.

  • Re: Satellite A50 - how can I change the boot with BIOS password priority?

    I have a Satellite A50. I need to restore to factory default to recover DVD, how do I boot from the DVD?

    The default boot priority is the HARD drive and is more bootable has been formatted. My BIOS is password protected, how can I change the boot priority? After having inserted the password, its always boot from the HARD drive.

    Thank you

    The boot priority, that you can change in the BIOS.
    Go into the BIOS with ESC, enter your password and then you can change it.
    But don t forget to save the changes.

    That s all and then you can boot from the CD.

  • Shared Satellite A50 - upper memory. How to do this?

    I recently upgraded my Satellite A50 - 492: 256 MB to 1024 MB memory. It is a sharing of memory for the video card and when I look at how many MB is used by the video card, I saw only 20 MB. I wanted to increase that to 128 MB, but I don't know where to find them in the BIOS, how to do this. Could you please send me the procedure to do?

    Hello Marlon.

    The use of sharde RAM for your graphics card will be controlled by the graphics driver and it will be of course specific to your graphics card. ATI has provide a useful utility which is accessible from the Panel of control-> Display Properties-> advanced. Within this utility is an option to change the value of the AMU which will change the RAM allocation shared to the graphics card. On my A30 is adjustable between 16 MB, 32 MB, 64 MB and 128 MB.

    I believe that Intel provides a similar utility but I've never seen so I can't comment on that.

    Save your advanced display settings to see if there is a similar option.

    In addition, Phoenix BIOS displays the value of the AMU in the settings menu of BIOS and it can also be change here.

    HTH

  • Satellite A50: How to use a 1440 x 900 on external monitor?

    I have connected a 1440 x 900 LCD monitor to my satellite A50. Unfortunately the graphics card does not support this wide screen resolution.

    I tried to download the latest driver for the card intel 82852/82855 chart to:
    http://downloadfinder.Intel.com/scripts-DF-external/Detail_Desc.aspx?AGR=N&ProductID=922&DwnldID=10099 & strOSs = 45 & OSFullName = Windows * 20XP % 20Home %
    20Special & lang = eng. But it was not possible to perform the installation. Some messages can not install... Contact your service provider.

    I found in a forum: http://forums.computers.toshiba-europe.com/forums/search! execute.jspa? dateRange = last90days & objID = & q = 1440 x 900.
    someone with the same problem, but het had a satellite A120.
    Accourding to this thread it is posible by changing some .inf files?

    Can I do the same thing with my laptop?

    Hi Raimond

    Thank you very much for the feedback solution and unposted. This is very useful information and I hope that your ad will help other users with the same problem.

    Good luck!

Maybe you are looking for

  • AppleScript to add computers to a computer list

    I would use AppleScript to add computers to a list of computers to ARD. Every morning I get a list of Mac that are supposed to work automation, but the automation server has lost contact with some. Then I understand why. Some mornings there are three

  • HP Pavilion dv6 3110ez: problem with video drivers

    Best regards to all,Can someone post a links to drivers for these graphics cards with switchable?I tried different drivers, and it does not work on Windows 8 Pro x 64and Windows 8.1 Pro x 64. The laptop is HP Pavilion Dv6 3110ez. Manufacturer: Hewlet

  • Dell printer will not print

    Why can I not use my dell printer to print?

  • After reinstalling I can no longer connect to DAH.

    I have a gateway with xp windows 2ooo & ok printer hp4500 got a d-link to bind web & printer with Qwest int & 2nd comp with xp.  I reinstalled etc so I lost or can't get connected DAH? I installed a 2nd computer card reader & it works but only transf

  • Send tips to microsft windows

    I would like to send a notice to Microsoft (windows) to develop a new tool/aspect of the use of the window. Who can I send? Thank you