Satellite A50 112: F1 not work key to enter the Bios

Similar Questions

• Satellite Pro L300 will not answer F2 to enter the bios

  Hello
  one of my clients sent me to fix a toshiba Satellite Pro L300...
  Windows completely froze so they are off which makes windows unbootable.

  im having the problem now is that pressing F2 does not enter setup and F12 does not display the start menu.
  is there another key that I have to press on as well as F2 in the Fkeys allows access to bios?

  Thanks in advance

  Hey Lodore, that of great! :)

  Thank you for your comments.

• Satellite Pro L300 will not start - cannot get into the BIOS

  Dear,

  I got a satellite Pro L300, width a HARD drive partitioned, with Win XP installed C and D with Windows 7 installed, the problem is the following:

  Days when I turned on my laptop, the OS splash screen appears, stop boot on Toshiba logo process.
  In addition, I can't enter the BIOS with the F2 key or the Boot Manager by using the F12 key.

  Help, please.

  > stop boot on Toshiba logo process
  This means that the laptop can not pass the POST (power on self test) properly and it would mean that a hardware problem has been detected on the motherboard.

  Remove one of the modules RAM (check both) and try to turn on using a single module of RAM.
  It is possible that one of the RAM modules is defective

  It would also be possible that the motherboard is malfunctioning, as you can see, it is hard to say what role could be wrong, but what looks like a serious hardware failure

• Satellite L500-1ZP - key to enter the BIOS version 2.10 and the upgrade of RAM

  Hello

  I have two questions:

  1. I recently updated my bios version of laptops to 2.10 and replaced the hard drive with an SSD.
  However, it seems that I can't enter the BIOS more.

  I tried several buttons, but it just won't let me get bios of the laptop more.
  Which button to use to access the BIOS?

  2. I want to upgrade the standard amount of memory from 4 GB to 8 GB.
  Are there recommended RAM sets should I use because of compatibility issues?

  Thanks in advance for any help.

  Kind regards.

  > 1. I recently updated my bios version of laptops to 2.10 and replaced the hard drive with an SSD.
  > However, it seems that I can't enter the BIOS more.

  To access the BIOS press F2 at the beginning of the order started immediately after you have switched on the device, press F2 (press several times on the line)

  > 2. I want to upgrade the standard amount of memory from 4 GB to 8 GB.
  > Are there any sets recommended RAM should I use because of compatibility issues?

  Toshiba Satellite L500-1ZP laptop takes the type of RAM SODIMM SDRAM PC3-8500 DDR3-1066 MHz 204pin. I would recommend the manufacturer Kingston modules.
  Value report great price

• Satellite M40X-112: WLAN not working not

  Hello

  I got a M40X-112 and had some problems recently with my wifi connection. The router works (tested with other customers) and the regular LAN on laptop computer makes it work. But 2 weeks ago I wanted to access the internet and it stoped working.

  I just tried to reinstall my OS but nothing has changed. Always the connection works occasionally for 2 seconds max.

  What could be the problem?

  Hello

  First check in the area to network adapters Device Manager if the wireless network card is correctly recognized
  If not, download the latest Wlan driver and install it...

  Then check all of the WLan settings on your laptop.
  I recommend checking the encryption and the validity of the key.

  Try disabling encryption on the router and try to connect to the WLan without security settings.
  If everything works, you can set the rear security settings.

• M6-1205dx: some keyboard keys do not work in windows or the bios

  I recently bought a HP Envy m6-1205dx laptop and I have noticed that some of the keys do not work on the keyboard. None of these special keys work under Windows or on the BIOS screen. I'm on my second replacement keyboard, and I'm having the same problem. The main keys that do not work are the 'asdf' and ' jkl: "in addition, the Enter key does not work." The fact that on the numeric keypad. Given that I have trie multiple keyboard with the same result, I have to assume that it is quite something else. Please help, it drives me crazy.

  Hey!

  I'm so glad that the solution I provided you with worked!

  Please mark my post who has worked for you as an acceptable Solution. This will allow others to find what works, if they fall into the same question. To say thank you, please click the thumbs up button!

  Thanks for letting me know that the suggestions worked.

  Have a wonderful day!

• Equium M40X does not work properly after upgrading the BIOS

  OK, well... I'm not a computer scientist, but I have a bit of trouble on my hands and I don't know where to go for the right help, so I came here.

  Today I started my lappy to confront an illuminous Green Office... not all it is green just of great spots here and there. Happened to me before, but it disappears after about 15 minutes, but today his guarded it usually hours and is still as he.

  I looked everywhere on the net for a possible fix but nothing helped, even though I've heard somewhere that an update of the BIOS might do the trick, so natually, I did... I came here and searched for my Equium M40X, found, downloaded and installed the latest version...

  but now I have a screen with a resolution of half of what it should be, it went from 1200 x 800 or something like that... to 1024 x 786 and I always get the green screen problem... the program toshiba provided for the update of the BIOS does a backup file (BIOS. (BAK)...

  I can't restore the old BIOS would set the screen resolution, but I'm just helpless as to how I go about it. I find the file, but I have no way to open/run it

  I've had this laptop for about 2 years now, I know probably just getting old and a bit tempermental, but if theres no way you people out there can help, I would much apreciate it :)

  Thanks a bunch - Ash

  Hello

  I Don t think the biosupdate is the reason for the reduced screen. It does not sound like a software thing, but rather a hardware malfunction.

  Is your normal screen during startup? If so, I'd say just remove your existing display drivers and install the new. But if it s like you described then it must be a hardware problem and the machine should be checked by a technician or at least a service partner.

  Would be better if your bring your machine to an ASP for a checkup of material.
  If you need assistance to find the ASP closest, try this link (the ASP index):

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Welcome and good luck

• Satellite A100 - line number on the keyboard does not work when you enter the password

  I have an A100 / Pro A100 series satellite laptop, what ever that means.
  Anyway, when you turn the laptop on and asked for a password, I am unable to put in number.
  It appears to the integer line, including BACKSPACE don't work.

  I can use the mouse to select and remove, but that leaves a mark of character in the password box.
  Other buttons work except the row number.

  If I need to connect an external keyboard to verify where I connect (if I can)?
  Any help would be great.

  Can I change the keyboard?

  Hello

  trying to connect a keyboard external usb to check it out. Yes, you can change the keyboard of laptop and it is not a complicated procedure.
  Details how to change keyboard, you can find here

  irisvista.com

  Welcome them

• M100 satellite disk restore will not work, keeps on rebooting the laptop

  Hello

  I have a M100 I need to restore to out of box state. XP is running too slow and after getting some internet pop ups of facebook, the laptop is having issues.

  Now, I tried to run the program of restoration of the drive and it happens with ramdisk boot, then the f6 press to install an aditional drivers, then wait.
  The mouse cursor appears on the screen and it can be moved around, then the laptop restarts just.

  I tried this several times and with main power and with and without the battery while on the grid.

  I suspected it was a problem of hard disk or a boot sector virus, which prevents the program of restoration of the race. However, I tried a new hard drive and it still does the same thing.
  I changed the RAM and still does not. About a year or two ago I had to restore the laptop as the HARD drive died and I replaced it with another hard drive on a different Toshiba laptop and it worked fine.

  Any help would be greatly appreciated as I need this laptop for school

  Thank you

  Hello

  Sorry, but one thing in this story is strange. Why load additional driver?

  If you want to have out of the box to install OS, you must use the Toshiba CD/DVD facilities sent. Using this disk, you do not need to load anything, just start the recovery procedure, let it run and when you're done just restart your laptop. That all s that you do.

  So, if you have this original Toshiba drive please do as follow:
  Start your laptop and press F12 repeatedly
  When the boot menu appears recovery disc into the optical disc drive
  In the list, choose the CD/DVD device and press ENTER
  Follow the menu on the screen

• The product key on my Satellite Pro P300 does not work

  The product key on my Satellite Pro P300 does not work.
  I entered the key from the sticker on the back of the computer. What I am doing wrong?

  Hello

  Why use this product key?

  Firstly the Toshiba recovery image is already enabled and you don t need this key more activations.

  Second, it's an OEM key and it will not work with other versions of Vista!

  Cheers mate

• Satellite L300-215 - Webcam not working not

  The webcam on my Satellite L300-215 did not work because I downloaded the new software of Toshiba months ago.
  The Chicony webcam is not yet recognized, and it will not install the Toshiba software.

  Two hours with Toshiba technical staff, including their having access remote to my computer, does not solve the problem.
  It seems that this is a very common problem and I tried some of the suggestions on the assignments, but without result.

  Anyone out there have the answer?

  I have two laptops Toshiba, Satellite P200D and Satellite A300, both with webcam and everything works fine. I agree therefore with statement on the very common problem.
  Webcam works well if your laptop is preinstalled with recovery image Toshiba (factory settings)?

  > I tried some of the suggestions on the assignments, but without result.
  What you have tried to solve this problem?

• Satellite L500 - keyboard does not work

  Hello

  I have Vista L500 with a dead keyboard. This machine has not been abandoned or anything it is spilled on it. I plugged USB keyboard external that works. The laptop keyboard does not work. I flashed the BIOS, update drivers, held shift for 10 sec (read on another forum), reset computer, check the updates of Windows Vista and ran 3 checks of Virus.
  Everything is perfect, just no keyboard?

  What should I check? What is a motherboard problem?

  Thanks for any help :)

  Hello

  Can enter you the BIOS (F2 key) with internal keyboard?
  If it isn't the internal keyboard seems to be defective and must be replaced

  I don t think you can do more. I mean you've tried everything what is possible and if an external keyboard works the installation of the OS should be ok.

  The keyboard can be ordered and replaced from an authorized service provider. Do you know how to contact the guys?

• How to enter the BIOS on Satellite U200 settings?

  How can I get into the BIOS menu until windows has started?
  When the laptop starts up, I press F2 so he give chose device which need to read.

  In my other pc I push DEL and the BIOS is here.

  I have the Satellite U200. I have software called and write BIOS version 1.10.04/03/2004

  There must be key to enter the BIOS settings.

  To wear? s manuals I na? find information about entering the BIOS settings.

  [email protected]

  Hello

  To enter the BIOS settings, please press the ESC key at startup upward. After that, press F1.

  By the way: when you start the laptop for a moment you can see the message how to enter the BIOS settings. It is displayer downstairs left at first upward.

  Button led will be used on desktop computers, not on laptops.

  Good bye

• How to enter the BIOS on the new Satellite L300?

  Hello

  Just bought today... I can't wait to install other operating systems, but can not understand how to enter the BIOS to boot from the CD.
  Any help appreciated

  Daka

  When you start your laptop (Toshiba homescreen) Please check the white bar at the bottom and read what is written there.

• How to reformat Satellite A50 112?

  Hello
  Can someone tell me how to reformat a Toshiba Satellite A50 112
  Thank you
  Gazza

  Hi Gazza,

  To reformat your laptop, you must insert the recovery CD into your optical drive and restart the laptop computer while pressing the C"" key. This will cause your laptop boot from the recovery CD which will then launch the process of re - install.

  Note that this process will be completely reformat your laptop and go back to its original state with the loss complete of the any of your own data and programs not original. Please make sure that you have a backup of your data before doing this.

  Kind regards