How to remove the shadow of the screen and the fonts?

Similar Questions

• Satellite M35 Pro - how to remove the screen bezel?

  Hey everybody,

  Please help me, I was able to disassemble the computer laptop everything and now I have the screen and the top cover out as well. I don't know how to remove the display frame to remove the hinges.

  Can you please help me with this!

  Thanks in advance!

  Hello

  Well my friend, in my opinion you should not try to disassemble the laptop if you n t have the necessary experience and don t know to do this!
  You could damage other parts that you know

  You're stuck on the LCD mask?
  As far as I know the LCD mask is covered by two screws that are hidden under the joints.
  You will need to remove both seals of mask LCD, and then you could remove the two screws hidden under the seals mentioned.
  Then, you could put your fingers between the mask and the LCD screen in order to release the LCD mask plastic locks.

  But note; Be careful, don't use any force!

• How to remove the frame of the screen on HP G62-340US

  I have a broken screen I want to replace but I'm not sure how to remove the framing safely. There should be a few screws at the bottom, but I don't see any. There are plastic flat points where I thought I'd find screws. This model don't live on the bezel, so burst you just off the coast at the base? I watched a few videos on the internet, and each similar to mine model has screws on the bottom.

  HP G62-340US

  Edit: The plastic parts is proved be stickers. I used a sewing needle to take them off.

  Hello:

  If you have not read the help manual, I suggest you do so.

  Please refer to Chapter 4 for R & R procedures component.

  http://h10032.www1.HP.com/CTG/manual/c02641795.PDF

• How to remove the SEND the COMMENTS tab on the bottom of the screen in 10.02

  One with ideas on how to remove the pesky "Send Feedback button in the lower r/corner of the window of Firefox 10.02.

  Hello

  Please try this: click on the "+" after the last tab and Customize. You can now click, hold and drag the widget customize. Customization of

• Portege M400 - how to remove the condensation of water?

  I received a second hand toshiba portege m400 mail and saw there probably a condensation of water trapped between the external display and touch screen behind her. because the screen in the upper left corner looks whitish. and the sender of the laptop said he wasn't there when he sent it. I have a picture of trapped moisture, for those who want to see it.

  so, I opened the screen by unscrewing. and I saw that most of the moisture is stuck between the external screen glas and one other layer behind him, which I guess, is the part of the touch screen. who looks inaccessible. These 2? the layers form the upperpart of the screen.

  the lcdscreen with all the electronics in this layer, form the lower part of the screen or if you want, cover. This part is now oke. He also had a condensation of water on it and I was able to gently wipe the little moisture of the lcdscreen without problem. This helped a bit with this problem.

  but moisture remains trapped between the part of the touchscreen layer and this layer of glass in the upperpart of the screen/cover.

  hoping to evaporate the moisture, I left the enlightened a bit more open for a day, I broke even the upperpart and the lowerpart of the screen. I applied a little of an infrared lamp, a remote backup heat. anything that did not help.

  * so, how can I remove the condensation of water? *

  * is there a way to remove a layer in the upperpart of the screen to reach the humidity? *

  Hello olekike

  Please don t get me wrong, but I'm afraid, you need professional with this Mr. help as I see that your question is not answered for days now, and I think that nobody here has a lot of experience with this stuff.
  View replacement OK but how to remove the condensation of water on the touchscreen is perhaps too heavy for us.

  I recommend strongly to contact the nearest Toshiba service provider and ask for help. talking with the guys what we can do about it.

• any ideas on how to remove the software malicious zebrouss?

  any ideas on how to remove the software malicious zebrouss?

  This thing I replaces my setting of search in safari - can get rid of it - don't know who got it

  You may have installed ad-injecting malicious software ("adware").

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Save all data first.

  Some of the most common types of adware can be removed by following the instructions from Apple. But before you follow these instructions, you can try an automatic removal.

  If you are not already running the latest version of Mac OS X ("El Capitan"), update or upgrade in the App Store you could adware to automatically remove. If you are already using the latest version of El Capitan, you can still download the current update of the Apple Support downloads page and run it. Still, some types of malware will be deleted, not all. There is no such thing as the automatic removal of all possible malware, either by OS X third party software. That's why you can't rely on software to protect you.

  If the malware is deleted in your case, you will still need to make changes to the way you use your computer to protect you from new attacks. Ask if you need advice.

  If the malware is not automatically deleted, and you cannot remove yourself by following the instructions from Apple, see below.

  This simple procedure to detect any type of adware that I know. Disabling is a procedure distinct and better still.

  Some legitimate software is funded by advertising and may display advertisements in its own windows or in a web browser while it is running. It's not malware and it may not appear. In addition, some Web sites display advertising intrusive popup that can be confused with adware.

  If none of your web browsers work well enough to carry out these instructions, restart the computer in safe mode. Allows to temporarily disable the malware.

  Step 1

  Please triple - click on the line below on this page to select it, and then copy the text to the Clipboard by pressing Control-C key combination:

  ~/Library/LaunchAgents

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + v press return. Open a folder named "LaunchAgents", or you will get a notice stating that the file cannot be found. If the file is not found, proceed to the next step.

  If the folder opens, press the combination of keys command-2 to select the display of the list, if it is not already selected. Please don't skip this step.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. If necessary, enlarge the window so that all the content show.

  Follow the instructions in this support article under the heading "take a screenshot of a window." An image file with a name starting in 'Screenshot' should be saved to the desktop. Open the capture screen and make sure it is readable. If this isn't the case, capture a small part of the screen indicating that what needs to be shown.

  Start a reply to this message. Drag the image file in the editing window downloading. Alternatively, you can include text in the response.

  Leave the case open for now.

  Step 2

  Do as in step 1 with this line:

  /Library/LaunchAgents

  The record which can open up will have the same name but is not the same as in step 1. In this step, the folder does not exist.

  Step 3

  Repeat with this line:

  /Library/LaunchDaemons

  This time the file will be called "LaunchDaemons."

  Step 4

  Open Safari preferences window and select the tab 'Extensions'. If the extensions are listed, post a screenshot. If there are no extensions, or if you cannot launch Safari, skip this step.

  Step 5

  If you use Firefox or Chrome browser, open the list of extensions and do as in step 4.

• Satellite A350 - how to remove the password?

  Hello world
  I am neck and I joined just the website
  I have a problem with my Satellite A350

  I bought this laptop from an auction of trust, not on the net, with the attached unfortunately password that don t work of password, but clams House auction that he does,
  What happens is when I turn on the first screen you see is looking for a password, I put in the so-called password that was given to me, but it won't work. When I try to enter the BIOS setup, he still wants the password to continue.

  This computer using Vista and I can't even replace the Vista disc in the DVD player because will not work because the op system is not started
  I hope someone knows how to pass the password or can help me. I tried to remove the internal battery but no go, my email is [email protected] if you want to explain myself better things

  Thank you to everyone
  Col

  Hi neck!

  It's not so good news

  I m not a Satellite A350 owner but if you want to remove the password you must contact an ASP and ask for help. Laptop technicians are know how to remove the password and so I think they can help you best.
  On the Toshiba site, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• How to remove the support contact at screenshot using the "home" button

  guys, please help, how to remove the support contact at screenshot using the "home" button? I use 6 s ios 9.2, but when I take screenshot with the menu help key, the help key disappear on my photo, but the problem is, I want to take screenshot with my home button, please help... Thank you

  What turned the problem into a screen with the home button? Quickly, you press the power off button and home together and release - if the sounds are enabled - you should hear the camera shutter sound and have the capture in your app screen shots. The help key is not displayed

• How to remove the DV6-7029WM flange to replace the LCD

  For the life of me I can't understand how to remove the front panel. I got the top removed, but the lower part will not move around the hinges. It seems to be not overlooked, but at this point I'am not sure. I removed the front screens and I didn't have any problems, but it baffled me.

  Thanks for any help.

  Hello

  It is the last link:

  http://h10032.www1.HP.com/CTG/manual/c03582006.PDF

  I hope this helps.

• password on HP pavilion home pc used I'll start PC how to remove the password of owner he ask to log

  I bought a pc at a yard sale and the guy gave me a password, but it does not work what can make the password on HP pavilion windows xp home edition and it won't let me boot pc how to remove the owner password it asks to connect to windows? is there a jumper to remove the old?

  Hello

  Welcome to the Microsoft Community and thanks for posting the question. I understand that you want to remove the password on computer xp. Let me help you with the issue.

  1. were you able to get to the desktop screen earlier?

  2. what security software is installed?

  3. have you made changes on the computer recently?

  4. have you SP 3 installed update?

  To resolve this issue, let us try these methods:

  Method 1.

  Start the computer in safe mode and try to connect to the admin user account.

  To start the computer in safe mode: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2.

  You can create a new admin user account and check the status.

  You can create a new user account and check. Once the new user account works fine, then copy the data from the old user account for the user account.

  How to copy data from a user profile damaged to a new profile in Windows XP: http://support.microsoft.com/kb/811151

  I hope this helps. If you need further assistance on this particular issue or any other related issue Windows let us know and we will be happy to help you.

  Thank you.

• ST2220T repair? How to remove the shell back and standing?

  Hi all

  I just took my beautiful ST2220T and I need to remove the stand in order to have the screen adjustment / layout that I need. I tried to find a service manual, or some instructions on How to remove the back cover. I have a lot of experience with the hardware, and that's why I'm looking for it :) Because each new device has some trick in his bag and I really don't want to accidentally do something I might regret later :)

  Thus, any help is very appreciated :)

  Thanks in advance,

  Voja

  Cave of dwarf,

  Dell does not open any monitor to fix them. We will send them the manufacturer to do this kind of work. This is why we do not have any "Service Manuals" for Dell monitors. The ST2220T is not designed by us to have the base and back cover. Any damage caused while attempting this is not covered by the standard Dell warranty.

• How to remove the corners rounded for windows explore

  as well as to explain how to remove the effect of line and shadow thin white border just after the white line for windows explore

  Which cannot be changed unless you change your Windows Classic theme.

  If you increase the size of your window, that you would never notice it.

  

• How to remove the logo from the Oracle of tableFirstTemplate?

  How to remove the logo from the Oracle of tableFirstTemplate?

  Dear aJohny!

  My worm jdeveloper is 12.1.3.0.0.

  For Jdeveloper code would be

  and the screen would be like this

  

  I think it's the correct process and the best answer to my question

  Concerning

• How to remove the top bar of the Ipad

  Hello everyone

  I want to kow how to remove the bar that is located on the top of the screen of the Ipad and contains the signal status, clock and battery of WIfi. Is possible to remove this bar of any views on the app?

  PS. : I am usign a company of the DPS version

  Concerning

  This is part of the operating system. You can't do anything with it.

  Bob

• How to remove the rear work plan in photoshop CS6

  Hello

  I'm trying to find how to remove the rear work plan in photoshop CS6?

  I always looking for the "preference", but I can't find the solution.

  I really prefer to have no background as the CS5 because I always work with "drag & drop" and now, it is impossible to see my office.

  

  Thank you

  Concerning

  You could ask on the cs6 forum, but I think thre an option under window or view to remove the frame of the application.

  http://forums.Adobe.com/community/Labs/photoshopcs6?view=discussions&start=0

  I have a question if you don't mind. What resolution is your screen?

• How to remove the permission of pc

  How to remove the permission of pc

  On the latest version of iTunes: account > permissions > Deauthorise This Computer (store > Deauthorise computer on older iTunes) on this computer: Deauthorize your computer using iTunes - Apple Support