How to remove the software malicious hp.myway of the mac mini

Similar Questions

• 2012 the Mac Mini has sluggish 5 GHz Wi - Fi

  OK, this is weird.

  Suddenly, my Mac mini is to have WiFi connections intermittently slow on the 5 GHz band, a router Linksys WRT-1900AC.

  I have a 105 MB Comcast connection, and usually tests Speedtest.net Mini cede passage on 100 Mbps results, usually in the 120 Mbps.

  This morning, I started having intermittent slowness. Sometimes I would grind to a halt, or there would be a long time to connect to a website. Speedtest pings during these episodes would be too high that 990 - in general, they are about 14 ms.

  The 2.4 GHz connection, which generally gives me a slower rate in the range of 50 Mbps, is fine. The only issues I see are at 5 GHz, where I have the chance to get a speed in the range of 30 to 50 Mbps.

  All other devices - iPads, iPhones, MacBook Pro, 4th-gen Apple TV, Microsoft Surface Pro 4 - connect at 5 GHz very well. I get my gears zippy on other devices. Just not the Mini.

  I rebooted the router and the modem. I emptied the cache DNS on the Mini. I deleted the Linksys SSD in Network preferences then reconnected. I removed the Mac Mini map of the network of the Linksys firmware and restored. So far, nothing works.

  One thing to note: a few weeks ago, I installed a couple of SSD in the Mini, replacing a single stock of HARD drive. Which is to remove the antenna plate (and everything else inside the Mini). But I re-assembled very well, and it has been working fine since then. I think that if there is a problem with the antenna, it would affect the 2.4 GHz band, too.

  Also, we moved into a new apartment in the same complex, taking our Comcast service with us. It worked fine when I put in place Sunday and worked a lot since then. But the Mini is in a new location on the block.

  Any suggestions for what to do next?

  If possible, please connect to the router with Ethernet and see if there is an improvement.

• How to remove the malicious software that is causing the pop up ads "to go around the web"?  These pop ups appear on almost every page I open and I have bad non-kid-friendly images?  Apple instructions for the removal of the malware did not help.

  How to remove the malicious software that is causing the pop up ads "to go around the web"?  These pop ups appear on almost every page I open and I have bad non-kid-friendly images?  Instructions from Apple to remove the malware have not removed despite them a number of times.

  Click here and follow the instructions. If you would rather not remove it manually, you can run rather MalwareBytes for Mac.

  MalwareBytes is a removal tool and does not stop adware or other malware from entering the computer. It should not be invoked to prevent future incidents; Instead, avoid downloading software from sources other than the Mac App Store or Developer Web sites.

  (140621)

• any ideas on how to remove the software malicious zebrouss?

  any ideas on how to remove the software malicious zebrouss?

  This thing I replaces my setting of search in safari - can get rid of it - don't know who got it

  You may have installed ad-injecting malicious software ("adware").

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Save all data first.

  Some of the most common types of adware can be removed by following the instructions from Apple. But before you follow these instructions, you can try an automatic removal.

  If you are not already running the latest version of Mac OS X ("El Capitan"), update or upgrade in the App Store you could adware to automatically remove. If you are already using the latest version of El Capitan, you can still download the current update of the Apple Support downloads page and run it. Still, some types of malware will be deleted, not all. There is no such thing as the automatic removal of all possible malware, either by OS X third party software. That's why you can't rely on software to protect you.

  If the malware is deleted in your case, you will still need to make changes to the way you use your computer to protect you from new attacks. Ask if you need advice.

  If the malware is not automatically deleted, and you cannot remove yourself by following the instructions from Apple, see below.

  This simple procedure to detect any type of adware that I know. Disabling is a procedure distinct and better still.

  Some legitimate software is funded by advertising and may display advertisements in its own windows or in a web browser while it is running. It's not malware and it may not appear. In addition, some Web sites display advertising intrusive popup that can be confused with adware.

  If none of your web browsers work well enough to carry out these instructions, restart the computer in safe mode. Allows to temporarily disable the malware.

  Step 1

  Please triple - click on the line below on this page to select it, and then copy the text to the Clipboard by pressing Control-C key combination:

  ~/Library/LaunchAgents

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + v press return. Open a folder named "LaunchAgents", or you will get a notice stating that the file cannot be found. If the file is not found, proceed to the next step.

  If the folder opens, press the combination of keys command-2 to select the display of the list, if it is not already selected. Please don't skip this step.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. If necessary, enlarge the window so that all the content show.

  Follow the instructions in this support article under the heading "take a screenshot of a window." An image file with a name starting in 'Screenshot' should be saved to the desktop. Open the capture screen and make sure it is readable. If this isn't the case, capture a small part of the screen indicating that what needs to be shown.

  Start a reply to this message. Drag the image file in the editing window downloading. Alternatively, you can include text in the response.

  Leave the case open for now.

  Step 2

  Do as in step 1 with this line:

  /Library/LaunchAgents

  The record which can open up will have the same name but is not the same as in step 1. In this step, the folder does not exist.

  Step 3

  Repeat with this line:

  /Library/LaunchDaemons

  This time the file will be called "LaunchDaemons."

  Step 4

  Open Safari preferences window and select the tab 'Extensions'. If the extensions are listed, post a screenshot. If there are no extensions, or if you cannot launch Safari, skip this step.

  Step 5

  If you use Firefox or Chrome browser, open the list of extensions and do as in step 4.

• How to remove the Microsoft software notification authentic to my pc

  How to remove the Microsoft software notification authentic to my pc

  Hello ShamimElyus,

  Welcome to the Microsoft community where you can find all the answers related to windows.

  According to the description, it looks that you are having problems with the removal of Microsoft software Notifications authentic.

  Perform the steps in the link and check.

  How to disable or uninstall the Microsoft Windows Genuine Advantage Notifications for Windows XP driver

  Answer to us if you are having problems with Genuine Advantage or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• How to remove the trial version of Acrobat DC 30 days that I have somehow on my MacBook Pro?  I don't want the dang thing, and it prevents me from using my Acrobat Pro 11 software.  Trying to access using the tree without end of support for Adobe is reall

  How to remove the trial version of Acrobat DC 30 days that I have somehow on my MacBook Pro?  I don't want the dang thing, and it prevents me from using my Acrobat Pro 11 software.  Trying to access using the tree without end of support for Adobe of really making me cranky.

  Hi thomh65004143,

  You simply drag the Acrobat DC application from the applications folder to the trash to uninstall.

  Then restart your system & install Acrobat XI Download Adobe Acrobat products. Standard, Pro | DC, XI, X.

  Let me know if you are still having a problem.

  Kind regards

  Nicos

• How to remove the printer driver under windows Vista software

  How to remove the printer driver under windows Vista

  Hello

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  --------------

  If you have an error spooler or service use these methods to make them disappear including having to re - install
  the same printer if you intend to remove it.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to remove the Exploit: Win32 / CVE-2010-3336

  Original title: Exploit: Win32 / CVE-2010-3336

  Does anyone know how to remove the Exploit: Win32 / CVE-2010-3336?

  Hi Bob,

  This may be due to malicious software or viruses on the computer.

  You have security software installed on the computer?

  If you have installed security software, I suggest you run a security scan and check if it helps to remove malicious software.

  In addition, you can also run Microsoft safety scanner to search for infected files.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  See the link to download and run the Analyzer:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Please let us know if the problem still persists. We will be happy to help you.

• How to remove the stdrt / MRT for Windows Vista

  How to remove the program "stdrt" from my Vista system? Is there a virus/program scan that will seek out and destroy as this guy plays hide and seek.

  Thank you

  Hi arjenhopman,

  MRT.exe is related to the malware Microsoft Windows. removal tool, while Stdrt can be a file associated with a program that is present on your computer.

  See the article for more information about Windows Malicious Software Removal Tool

  The Microsoft Windows malicious software removal tool helps remove specific malicious software and present on computers that are running Windows 7, Windows Vista, Windows Server 2003, Windows Server 2008, or Windows XP

  http://support.Microsoft.com/kb/890830

  Some virus disguises itself as system files or program so, I suggest you use Microsoft Security scanner (MSS) to any threat and try to correct

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: Infected files can be deleted from your computer; There is a chance of data loss.

• Please tell me exactly how to remove the AVG search function

  Please tell me exactly how to remove the AVG search function

  edited by a moderator for clarity

  You need not repeat dozens of times or use profanity to get help.

  (1) disable all non-essential or unrecognized extensions on this tab. Don't know what it does? When in doubt, turn off:

  Firefox orange (or the Tools menu) button > addons > Extensions category

  Use the links above a disabled extension to restart Firefox if some seem to.

  (2) restore your Google search engine:

  https://addons.Mozilla.org/en-us/Firefox/addon/SearchReset/

  (3) check a user.js file (before the release of Firefox, otherwise the parameters in this file can cancel your cleaning) as described in this article: How to fix preferences that will not save.

  (4) If AVG search took over your page to the new tab (Ctrl + t), which changes as follows:

  (A) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (B) in the filter box, type or paste newtab and make a pause so that the list is filtered

  (C) double-click the preference browser.newtab.url and enter the desired value for your favorite page:

  thumbnails (i) (default) Page = > subject: newtab

  (ii) blank tab = > subject: empty

  Firefox homepage integrated (iii) = > topic: welcome

  (iv) any other page = > full URL of the page

  IMPORTANT: If you have AVG software in your Windows Control Panel, you need to remove it.

• How to remove the virus boostspeed.exe

  How to remove the virus boostspeed.exe

  Hi Laurence,.

  As far as I KNOW, you're talking about Auslogics Bootspeed, and it is a program (even if some consider how he acts and what he does to be very similar to how the system will react as if he was infected).  For technical support, see: http://www.auslogics.com/en/support/.

  If it's this product, there seems to be any special product online removal process (but perhaps custom support can help). If it isn't this product or there is nothing like it on your system, then why do you assume that it is a virus - are guessing you or some AV programs, told you that (and if so, which) and how locate you the file name as being the problem?  What is the full path to the file (for example, C:\Program Auslogics... or other)?    What security software you have installed (all names and the exact version of each)?  What version of Windows are you using?  Indeed, please see http://support.microsoft.com/kb/555375 for ideas on other information that will help us.  The more we know, the better we can help and the more focused we can make recommendations.

  I would try the following: start by creating a system restore point, and then back up the registry as well (just to be on the safe side).

  Download the free Revo: http://www.revouninstaller.com/revo_uninstaller_free_download.html and use it in advanced mode to completely remove Auslogics Bootspeed.  If it does not work because it says it is running (which is possible if there is probably not), then start safe mode and try again to remove use Revo in Mode safe.  The chances of success are much higher now that it is not likely to be running in Mode safe.

  I hope this helps.  Please get back to us in all cases, and if it haunts you again, please answer these questions as well as what happened when you tried to remove it as suggested.  On this basis, we will have a better idea if we treat just a difficult program to remove or legitimate an infection of any (or possibly both) and take the necessary measures from there - but we need to learn more and to see if the simple answer works (or why it failed).  We desperately need your help here (provision of information) to be able to help (with recommendations and options and courses of action - or more questions).

  Thanks and good luck!

  Kosh

• password on HP pavilion home pc used I'll start PC how to remove the password of owner he ask to log

  I bought a pc at a yard sale and the guy gave me a password, but it does not work what can make the password on HP pavilion windows xp home edition and it won't let me boot pc how to remove the owner password it asks to connect to windows? is there a jumper to remove the old?

  Hello

  Welcome to the Microsoft Community and thanks for posting the question. I understand that you want to remove the password on computer xp. Let me help you with the issue.

  1. were you able to get to the desktop screen earlier?

  2. what security software is installed?

  3. have you made changes on the computer recently?

  4. have you SP 3 installed update?

  To resolve this issue, let us try these methods:

  Method 1.

  Start the computer in safe mode and try to connect to the admin user account.

  To start the computer in safe mode: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2.

  You can create a new admin user account and check the status.

  You can create a new user account and check. Once the new user account works fine, then copy the data from the old user account for the user account.

  How to copy data from a user profile damaged to a new profile in Windows XP: http://support.microsoft.com/kb/811151

  I hope this helps. If you need further assistance on this particular issue or any other related issue Windows let us know and we will be happy to help you.

  Thank you.

• How to remove the default for a limited only account gateway (with static ip address)

  I have 1 pc with 4 accounts 1 account administrator and user the rest is limited accounts. I use a static ip address and the question is how to remove the default gateway on these limited account so that they cannot access the internet

  The entry door is fixed to the adapter and selectively cannot set properties of the different adapter for different users, all users use the same adapter.

  With Internet Explorer (does not work with other browsers), you can configure a proxy server with a fake address, you can do this through Group Policy, or you can do it manually for each individual user through the Internet Options settings.  You can set the proxy server address map of loopback (127.0.0.1) or you can set it to a bogus address of your private address range (usually the range 192.168.xxx.xxx)

  If you are using other browsers, you can use NTFS permissions to deny access to the Explorer or the program directory or you can use software restriction policies to deny access to specific programs.

  Alternatively, you can use a logon script to activate the network connection service when you open a session and the other to turn it off when you log, but if you do this you will disable the entire network for limited users if it cannot be a solution for them.  The script can be a simple two-line script:

  Logon script:

  SC config Netman start = demand
  net start netman

  Logoff script:

  net stop netman
  SC config Netman start = disabled

  These can be useful:

  http://www.howtonetworking.com/Internet/restrictie11.htm
  http://www.christianblog.com/blog/abelajohnb/disable-Internet-access-in-Windows-for-specific-user-accounts/

  John

• How to remove the units listed in the window of the autorun program

  Does anyone know how to remove the automatic launch of units? Earlier, I installed several of my old mobile phones, which I don't use anymore, but when I open the autorun program, they are listed (some several times) and I can't seem to uninstall. Would be very happy if someone knows how to solve my problem. :)

  Original title: Wireless units in autorun

  Hi Bijei,

  • It is a program to AutoPlay or AutoRun?

  I suggest you open the editor from the registry on your computer and check in below location if the old mobile entries are listed. To open the registry editor follow the steps below:

  a. Click Start.

  b in the start search box type regedit and press to enter.

  (c) in the registry editor, navigate to the following location.

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\AutoplayHandlers\KnownDevices

  or

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\AutoplayHandlers

  d. Locate the old entries from mobile device to the above address.

  If you are able to find the entrances to the location above, you can click with the right button on the mobile device entries and remove entries. After you delete the key, restart the computer and verify if they appear in the list of AutoRun again. Before you remove the key make sure that you back up the registry keys.

  Registry warning:

  Sometimes, this problem is due to two Windows that have been corrupted registry entries. To resolve this problem, you must use the registry editor to delete the corrupted registry entries.

  However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, proceed as in the KB Article:

  http://support.Microsoft.com/kb/322756/

  Hope this helps and let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Prime Minister 9. I made a mistake when I did drag an audio file in the line of the image. How to remove the audio file. I tried ctrl z and shift delete nothing done.

  Using Adobe Elements 9 first, I made a mistake when I did drag an audio file in the line of the image.

  How can I delete this audio file? I tried ctrl z and shift delete. software has the ' delete the scene and all of the properties in gray. Just "delete scene only" it and it does nothing to remove the audio file.  I had to drag the line from the soundtrack.

  Who can help me?

  LinFos04

  What you wrote, it seems that you are in the scene of Premiere Elements 9.0/9.0.1 workspace.

  Please see screenshot showing you how to remove the audio immediately after you dragged in the film that had been marked "Drag the next clip here"

  

  Moving forward consider working in the workspace of timeline that gives you a better view of what is happening and therefore gives you more control over the flow of work. Please click chronology to watch how this audio present in the workspace of chronology after what you did in the space of the stage line.

  Please let us know if it worked to get rid of the audio unwanted in the Premiere Elements 9.0/9.0.1 workspace sceneline.

  For any question or need more information on the above, please ask.

  Thank you.

  RTA

• How to remove the Tables of HFM Application in SQL

  Hi gurus
  
  1. how to remove the HFM Application Tables in SQL?
  Its manual removal but each application having 120-150 tables? How to do this in one fell swoop?
  
  I deleted some applications using the workspace / shared services, but still its display under HFM under the Tables of SQL Server.
  
  Please help me
  
  concerning
  Smilee

  Hi Smilee,

  1. If the application opens in the web management interface, go to Taskflows management module and make sure that no taskflows exist yet for this application. Remove any existing taskflows.

  2. If demand exists in Shared Services, right-click on the demand for Shared Services and try to remove the application from here

  3. stop Hyperion Shared Services and all the Windows of financial management processes and backups of the relational database of the two patterns.

  4. check the relational database of Hyperion Shared Services repository, in the "ces_apps" table and make sure that there are no lines containing the appname "EXAMPLE." If the line still exists you should enlist the help of Oracle Global Support software to clean Hyperion Shared Services before proceeding.

  5. it is possible to remove all content removed from the relational database of financial management application. Must be very careful when handling manually tables database that permanent damage can be done at the application and other applications if the wrong content is removed.

  (a) first remove all tables, indexes, sequences, and the package objects that begin with the name of the application
  (b) remove all tables starting HSV_appname_xxxxxx
  (c) remove all rows in tables referring to demand HSX_CLUSTER_xxxxx.
  (d) delete all the HSV_ACTIVITY_KILL_USERS, HSV_ACTIVITY_NO_ACCESS, HSV_ACTIVITY_SESSIONS and HSV_ACTIVITY_USERS and HSV_USERS_ON_SYSTEM lines that refer to the name of the application.
  (d) remove the line containing the name of the application from the HSX_DATASOURCES table.

  6. the next time that all Hyperion services are restarted, the application must be removed safely from Windows client.

  You can contact your DBA to write a query on how to remove it.

  Hope this helps,

  Thank you
  Charles Babu J