How to remove toolbars that can not be uninstalled as usual?

Similar Questions

• I found the show/hide button toolbars, but you should know how to REMOVE toolbars that appear on this list?

  I found the show/hide button toolbars, but you should know how to REMOVE toolbars that appear on this list?

  Is attached a screenshot of my screen with the context menu to show/hide tabs. I want to delete some of them and let others. Please help me to know how. Thank you!

  Hmm, maybe this "one-time" imported into the new preference? Try this:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste the cust and make a pause so that the list is filtered

  (3) double-click the preference of browser.uiCustomization.state and the content must be highlighted in a small dialog box.

  (4) copy the whole line and paste it into Notepad and save it as a backup.

  (5) in Firefox, click on the button '3-bar' menu > developer > Notepad. Remove the comment that appears and paste data preferably, that must appear on a long line. Click on the "Pretty Print" button to make it more readable.

  So I hope that you can spot the extra toolbars and change them out, taking care to preserve the commas between the elements.

  I don't have the extra toolbars in mine, but I copied and pasted back this spaced format and Firefox was able to handle it well. I went into customize and moved a button, and when I left, Firefox has rewritten the preference set as a single line. Assuming that yours works fine, then you can get rid of the backup from step (4).

• Under XP how to remove programs that do not show a button 'Delete' on screen ' Add/Remove '?

  Under XP how to remove programs that do not show a button 'Delete' on screen ' Add/Remove '?

  Hi cengstro,
   
  -What are the programs that you have this problem with?
   
  Visit the site of the manufacturer for the program and search for uninstall/removal tool uninstall the program.

  How to change or remove a program in Windows XP

  You can only remove a program with the add tool / remove programs if the program is written for Windows. If you don't see the program you want to remove in the currently installed programs box, view the program documentation for instructions on how to remove it.

  How to manually remove programs from the add tool / remove programs

• How to remove photos that are NOT on the photo stream

  I downloaded pictures from my camera to the computer, then on my iPhone.

  I cannot delete them now.

  The only way is to delete them from my computer I DON'T want to do.  I want to just delete from my iPhone because they take up far too much space.

  Help please.

  Hello Dolek,

  Welcome to Apple Support communities.

  It sounds, you want to know how to remove the pictures that have been synchronized to your iPhone, but you want to make sure that these photos are not deleted from your PC. Try to take a glance at the article below, the link that describes the process of synchronization of photos to a folder on your PC to your iPhone, and remove photos from the selected folder or choose a different folder that you want to synchronize the photos since.

  Sync photos from your computer to your device via iTunes - Apple Support iOS

  So long.

• How to remove programs that are not in the folder "programs". Especially must delete Incredimail and Blekko other programs.

  I would like to uninstall programs Blekko like Incredimail and others.

  Hello JEFoulke,

  In addition to information from SC Tom, you can try the uninstall from the FixIt Solution Center:
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  If this does not help, you can search the Internet for programs uninstall 3rd party software.

  Let us know if that helps.

  Thank you!

• Relocation of bar EARLY and how to remove software that will not delete when you click Change/Remove

  I tried every icon on "my control panel" and nothing I have a discovery tells me how to move my OE or START bar to remove a program that won't be not clear.

  I tried every icon on "my control panel" and nothing I have a discovery tells me how to move my OE or START bar to remove a program that won't be not clear.

  What is a start bar? The Windows taskbar? What version of Windows are you using?

  Try this to remove programs.

  Utility Windows Install CleanUp:
  http://MajorGeeks.com/Windows_Installer_CleanUp_Utility_d4459.html

  Bruce Hagen MS - MVP [Mail]

• Apps that can not be uninstalled

  How to uninstall an apps which is no longer in my installed applications, but is still on my xoom

  If you downloaded and installed yourself then you should be able to remove from

  Settings > Applications > manage Applications >

  From there, you should be able to find your application and select this option and then Unistall it on the next screen.

  If you're talking about a pre-installed application or system, then you cannot uninstall this way, but I suspect that the first instructions you should sort out.

  If this isn't the case, then let me know that you are trying to uninstall either the app.

• Anyone has an idea how to manually remove items that do not appear in the Collection, but take place on the device. Specifically, an audio book downloaded via Overdrive?

  Anyone has an idea how to manually remove items that do not appear in the Collection, but take place on the device.  Specifically, an audio book downloaded via Overdrive?

  Hello
  
  1. what type of files are in the audio book? Could you provide me with the file extensions?
   
  If you delete the information or files audio books could not show some information. I wouldn't recommend allows you to delete the files. If you want to remove them, you can contact overdrive support.
  
  Hope this information helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Removed USB controllers: can not return - "this device cannot find enough free resources that it can use. (Code 12)

  Original title: removed USB controllers: can not return

  Hello

  So today I tried to connect to a printer, and it wouldn't work (separate the issue, I don't want to worry about that now)

  I've seen several messages saying: you need to uninstall the USB controllers in Device Manager and then restart your PC. The pilots would then automatically reinstalled.

  It didn't happen, and now my Dell touch screen does not work. I can miss several other USB controllers too, I uninstalled about 3 of them, but I don't know whether or not it has been reinstalled.

  I currently have:

  -Hub USB generic

  -Enhanced host controller USB Intel (R) 8 series #1-9C 26

  -USB root hub

  -Host controller compatible xHCI USB

  Note that the last of them was a symbol of error on it and reads as follows:

  "This device cannot find enough free resources that it can use. (Code 12)

  If you want to use this device, you will need to disable one of the other devices on this system. »

  Can someone please tell me how much USB controllers I should have and how to save them?

  Thank you very much

  Hi Shalini.

  Thanks for the reply, but if you read through the posts on this thread, I think you will find that it has already been suggested that I do these two things - what I've done many times without result.

  Fortunately, I managed to fix it myself.

  To satisfy your curiosity and help someone else who could see this thread with a similar problem, here are the steps I took finally solve the problem:

  ______________________________________________

  I was always convinced that the problem is basically with the xHCI USB controller that I saw always reported as not working not properly in the device (Code 12) Manager. With this in mind, I set out to see if I could determine what the device was supposed to be in conflict with. I ran msinfo32 and began to examine the conflicts/sharing section. After a while, I decided I could not see anything obviously problematic or direct me to the controller xHCI, so I gave up on that front.

  Well, if I couldn't fix the problem with the current installation, maybe that I could find another way to install the xHCI USB controller that could circumvent the flaw that seems to be caused when windows reinstalls automatically it when restarting after the abduction. So I started trying to learn more about this "xHCI USB controller" - since Googling this term has given no end of problems not related.

  In Device Manager, I found a way to isolate the details of this driver in device (somewhere under the properties I believe) Manager. This has created a custom device showing in view only a select few connects the Manager. I have spent some time in the analysis of these and found the time during which the camera has stopped working properly. Suddenly a pattern emerges. Over and over again, see you the following series of when I was hoping that allowing windows to reinstall automatically the driver would to fix:
  • Device PCI VEN_8086 & DEV_9C31 & SUBSYS_05F91028 & REV_04\3 & 11583659 & 0 & A0 has been removed

  [Rebooted PC]

  • Device PCI VEN_8086 & DEV_9C31 & SUBSYS_05F91028 & REV_04\3 & 11583659 & 0 & A0 has been configured
  • Device PCI VEN_8086 & DEV_9C31 & SUBSYS_05F91028 & REV_04\3 & 11583659 & 0 & A0 had a problem starting.

  Under each newspaper was referring to a driver name, I didn't already had access to: driver name: usbxhci.inf

  Now I got some new information about the xHCI USB controller, I took to Google. After much research (and not find something relevant), I found 2 obscure references to the driver who seemed at least somewhat relevant.
  The first reference has been a post on the forum where someone's USB ports stopped working. very similar problem to mine! There is little of any particular use in the nets, with the exception of the reference to a couple of windows updates: KB 2823516 or KB2822241

  It is not clear exactly what usbxhci.inf capacity was tied to these updates, but I made a note of them and moved.

  Another article contained no mention of specific ports USB not working does not and was centered around a different problem entirely. However, he has mentioned an another windows update: KB2919355-x 64.msu

  This one (as I remember) was clearer on the relationship between the update and changes to the usbxhci.inf file.

  Now, I had three updates which could make changes to usbxhci.inf at one point. With their name on a piece of paper, I started looking through my updates installed to see which ones I had installed. I soon discovered that Ko 2823516 or KB2822241 were not present on my PC, which saved the penalty to guess who would be the right to uninstall first.

  KB2919355 has been installed, and I made the decision to uninstall it, because as far as I knew, this update changed something in usbxhci.inf. After the initial uninstall was completed, but before the mandatory reboot for changes to take effect, I went into Device Manager and removed the xHCI USB... because I was afraid that if the new, "defective" was always present during the reinstallation of the update, it doesn't change anything.

  The device is removed once more, I rebooted the system. He drives for a considerable period, uninstall the update and then seems to have some sort of hitch; declare something in the sense of "we could not complete the operation. Changes to undo. " He stayed like that for a while before the system became operational again and began to "prepare windows. Once it was over, I discovered that my touchscreen and USB ports worked very well.

  Investigation later showed that the compatible USB xHCI host controller was is no longer marked with warnings. In addition, a series of USB controllers appeared that had not been there when the xHCI device was defective. I was also pleased to note that the update of windows for KB2919355 had already been reinstalled without messing up anything.

  _________________________________________________

• There are 3 files on my flash drive that can not remove any point I try

  Good night, there are 3 files on my flash drive that can not remove any point I try. What can I do?

  I hope this seven Forums tutorial can help you a lot:

  http://www.SevenForums.com/tutorials/79699-Undeletable-file-delete.html

• I have 3 I paid and you want to delete all the information that a a them. How to be painful that will not delete fron the 2 that I paid I want to use

  I have 3 I paid and you want to remove all the information ONLY one of them. How to be painful that will not delete the other

  You can go to settings > General > reset > erase all content and settings and will erase the iPad that you perform this action on. It has no effect on another device.

  See you soon,.

  GB

• Please wait while Windows configures FAX"... this process stops and I get another message that says:"the component you are trying to use is on a CD-ROM or another removable disk that is not available. "

  Original title: widows installation problem

  I have Windows XP Professional running on a desktop older.  I cleaned the disk and I would use it only as a 'internet '.  It works well and response times are pretty fast, but when I connect I get a box that says "Please wait while Windows configures FAX"... this process stops and I get another message that says "the component you are trying to use is on a CD-ROM or another removable disk that is not available", "put the 'FAX' disk and click OK. , "" Use Source: '1' "»

  The first question is I do not use a fax application and never did, I have tried every disk I can think of to complete the process, but I get the same message with each one 'the path '1' is not found. "Make sure you have access to this place and try gain or find the installation 'FAX, MSI' package in a folder from which you can install the FAX product." .. then "error 1706 - FAX." Valid any source not found for the FAX product.  Windows Installer cannot continue. »

  This will take place two or three times at the beginning upward.  How can I prevent Windows Setup tries to install something that I do not use or do not seem to have?  I deleted any fax program, that I could find on the computer, and nothing seems to work.

  Hello

  1. have you done any change in software on the computer lately?
  2. are you able to install other applications and programs successfully?

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state. There is an application which is set to start when you start the computer and which launches the installer of Windows.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• "The feature you are trying to use is on a CD-ROM or another removable disk that is not available. Insert the disc "TrayApp".

  OT: TrayApp disk?
  I get a message after my computer starts "the component you are trying to use is on a CD-ROM or another removable disk that is not available. Insert the 'TrayApp' disk then I have another box that says please wait while the window configures TraApp. They're going away the screen, I'm sure it's something on my beginning of preety menu up which should be removed, but don't know what it is. Please can someone help?

  Hi sandirose,

  1. using HP printer?
  2. don't you make changes to the computer before the issue occur?

  TrayApp disk is a HP printing software, I suggest you perform clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

• Cannot install Silverlight error: the component that you are trying to use is on a CD-ROM or another removable disk that is not available.

  Original title: Cannot install siverlight wants cdrom

  When I try to install from a download of Microsoft Silverlight, I come me next survey on my screen:

  The feature you are trying to use is on a CD-ROM or another removable disk that is not available.

  Insert the disc of "Microsoft Silverlight" and click OK

  Use source:
  Installation of Microsoft Silverlight 1

  I killed the associated files of SilverLight with REGEDIT.  In Add or remove programs to audit, it has returned.

  Please help as I can't watch videos COMCAST without installed.

  Frank K.

  Hello

  I suggest you go to the link below and post your question in the Silverlight forums for help on this issue.

  http://forums.Silverlight.NET/

  Hope this information is useful.

• somehow my trash has been removed and I can not find a way to recover it, can someone help me.

  somehow my trash has been removed and I can not find a way to recover it, can someone help me.

  Hi Don,

  I believe that the following tutorial will solve your problem: http://www.vistax64.com/tutorials/168608-recycle-bin-restore.html.  Note down this (before the items) the many associates tutorials related to the trash if either it doesn't work (but I bet it will be), or you would like more information about this.

  Good luck!

  Kosh