Unable to start my computer! 0xc0190036! 363/63561 (Explorer.exe)

Similar Questions

• Cannot enter 'log-in' page after the upgrade of VISTA SP1 x 32 SP2 with failure code 0xc0190036 340/47122 (explorer.exe)

  I was "forced" to upgrade my computer to SP1 to SP2 when I tried to download the latest msn who.

  The upgrade part wasn't serious and VISTA asked me to restart my computer after the upgrade. Then I REBOOTED.

  The problem came when the final stages of the upgrade, which took part after reboot. It was somewhere near STADIUM 1/3 or 2/3 and then suddenly all blackened. I'm POSITIVEMENT SAFE that my computer is connected to the power supply (mine is a laptop). And then when I start to restart my computer (the second time), I got this message

  0xc0190036 340/47122 (explorer.exe)

  Then I restarted and I got to a page where windows told me that my computer is not able to be marketed with success because of the recent changes I made.

  I did an upgrade from the night before, where I update the OFFICE GENIOUS sthsth (sorry, but I forgot the name). I need to upgrade this thing in order to be able to upgrade to SP2 (complicated huh? lol)

  I tried to use the recovery thing and save the thing but WINDOWS insisted that I do not have a recovery... I would say is quite disappointing...

  COMPUTER:

  HP 2133 NetBook

  VISTA HOME BASIC run x 32

  I ' ve done some searching on the web but found nth related code 340/47122 and VISTA HOME BASIC x 32 and SP2...»

  The last method I want to use is the method of parameters factory reboot, restore... so here I am, ask help from experienced users. I don't have any DVD or CD ROM for the restart or what. any method that can safe me to restart my computer?

  Million thanks,

  momikoo :)

  Hello

  Method 1:

  I suggest you to check if you are able to start in safe mode or last known good configuration. Follow the steps mentioned below.

  a. restart the system and keep tapping F8 until you reach the start menu.

  b. Select secure known mode/last good configuration in the list and press ENTER.

  Method 2:

  I suggest you follow the steps mentioned in the link given below and let us know if your problem is solved.

  Error code on a black screen when you try to install a Service Pack in Windows Vista: "0xc0190036."

  http://support.Microsoft.com/kb/975430

   

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Vista SP2 x 64 install error "0xc0190036 517/97646 (explorer.exe)" _

  I'm trying the upgrade of vista x 64 sp1 to vista sp2 x 64. When the system tries to restart, it crashes with the error "0xc0190036 517/97646 (explorer.exe). I have to hard start and do a restore.
  I tried several suggestions over a period of 3 days. One of the suggestions was to run chkdsk.  This is the error I get when I run chkdsk: "explorer.exe entry index in the index file 35 $I30 are incorrect."  If I run chkdsk /f it says it removes the entry and then explorer.exe is an orphan.  When I reboot and running chkdsk /f even once, I get the same messages.
  Is the vista sp2 x 64 install error and the error from chkdsk associated.  What should I do?

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009 (i.e. less than 2 weeks). Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Unable to start the computer by using the power switch - y480

  Recently, I bought the Ideapad Y480.

  I could not start the computer using the power button. I had to use the oneKey recovery to start the computer and restart the system in the recovery menu to restart the computer.

  What should I do now?

  
  

• Unable to start the computer after the installation of Windows updates

  original title: same problem with the other oddities.

  I also have a computer down the update.  Although I tried several times to start the computer from the installation CD re, when I get to the page where I have options to fix or exit, locks from my computer to the top and will go no further.  Suggestions how to get the computer to boot the CD and allow me to choose the repair option without locking up?  Thank you!

  I finally managed to get the reinstallation CD to load.  I also spoke with telephone tech support at Microsoft who helped me to descend KB977165 my system.  After that was removed the computer booted without error.  By MS tech, I am also running the anti-virals and malicious programs to see if they detect all the other infections.

  Originally, the CD would load to the point of being able to choose between the options: continue to fix or exit.  At this point, the computer froze upwards and would not all repairs in order to remove KB977165.  Microsoft launches a call again tomorrow in order to install safety free bug so far.

  Thanks for your reply.

• Unable to start the computer

  Original title: help me get this to start please!

  I turned on my computer last night. Got the following:

  1. the engine started, I can hear the fan, the little yellow light was on for anout 6 to 8 seconds.

  2 Gateway logo etc. have shown and then a cursor blinking.   Tried the F8 diet... no response.

  Operating system is Windows XP.

  Any ideas please.   I am in my 70s and you wish I could talk to someone direct!

  Hi StewartSimpson,

  Follow these methods.

  Method 1: Start your computer in last known good configuration.

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  Method 2: Follow the steps in the article.

  Advanced Troubleshooting for General startup problems in Windows XP

  http://support.Microsoft.com/kb/308041

• I can't do an update of windows in safe mode and unable to start my computer in normal mode?

  Home premium Window7 on Asus laptop

  I want to install antivirus McFee, and it's at a standstill with some problems.  He asked me to do a windows update.

  When I start the computer in normal mode it fails and offers you the following message "a problem has been detected and windows has shut down to protect your computer."

  So I can open only in my local library with the safe mode with networking

  Unfortunately, I can't do an update of windows in safe mode?

  I spent hours trying to solve this problem without the chance and the library is due to close so I'll for now I just ask if anyone can help: -.

  So, how can I do because the computer does not allow me to open in normal mode and I need to install windows updates?

  REMOVE McAfee.  Download your computer up to date and works well.

  Do a scan with ADWcleaner http://www.bleepingcomputer.com/download/adwcleaner/

  AFTER that, install McAfee.

• No start menu, icons... Explorer.exe problem... can't fix it somehow, it seems! :/

  I tried to reset my computer to make it faster... backed up all the files. went to put the CD in but not implemented the menu came when I rebooted? so I watched that I needed to uninstall SP3 cos the CD was service Pack1, so I did, it went well. While the CD is still working so I found that I now had service pack 2, I was able to remove easier with "run" in service pack 3 then I uninstalled the 2 files I found on a website. Restarted then went 2 log on my account and now the error of normalidz.dll rises... I can obviously get on Task Manager, which I tried to launch explorer.exe but he just said that he could not be found. I tried to restore to the last known good configuration and safe mode and there has been no luck there. :/ so yes... any guy of ideas? Please, I beg you! ? :(je tiens que le CD travaillerait maintenant mais nope.) any help would be grateful! Thanks :)

  I found another solution on another site that suggested I have the file normalitz.dll get off my other computer and copy it to C: > Windows > System32 which solved the problem.

  Thanks for your help :) and I hope this can help others.

• Unable to start the computer - boots of BSOD

  Dell Dimension 210/9200c Windows XP Pro SP3 desktop

  Here's what I spent...

  Start-up, enter the admin password.

  Floppy drive seek failure

  Strike F1 key to continue, F2 to run the utility series

  If I choose the F1...

  Loading PBR for descripto 2... In fact.

  Playing a disc error has occurred

  Press CTRL + ALT + DELETE to restart

  I press CTRL + ALT + DEL and it leads to FAILURE to SEEK the FLOPPY DISKETTE.

  If I choose to F2, it goes to creating useful and I don't know what to try to change the problem.

  If I press F12 and go to the start menu...

  SafeMode to start the BSOD

  I tried to boot from the CD and use my recovery CD and the result was...

  Window, set up ran with the establishment is responsible (file exchange...), then he went up to the game starts windows.

  Here's what came...

  A PROBLEM HAS BEEN DETECTED AND WINDOWS HAS SHUT DOWN TO PREVENT DAMAGE.

  IF IT IS THE FIRST TIME YOU'VE SEEN THIS STOP ERROR... RESTART YOUR COMPUTER

  CHECK FOR THE PRESENCE OF VIRUS.  REMOVE ANY NEWLY INSTALLED HARD DRIVES OR HARD DRIVE CONTROLLERS.

  CHECK THE DRIVE FOR THE CORRECT AND COMPLETE CONFIGURATION

  RUN CHKDSK/F TO CHECK FOR HARD DRIVE CORRUPTION, AND THEN RESTART

  TECHNICAL INFO:

  STOP: 0X0000007B (0XF78DA63C, 0XC0000034, 0X00000000, 0X00000000)

  I can't the system to start.  I haven't added hardware or software.  I think that the computer has restarted after downloading some updates, but I can't to start or restore system. What can I do?

  Yes, I can get to this screen.  After you have clicked on enter, it looks like this:

  SET UP WINDOWS

  __________________

  __________________

  downstairs "SET UP IS LOADING FILES (*)...

  Then it turns down in "SET UP START WINDOWS"

  Then, it goes straight to the BSOD.

  I tried several times and he always goes for the BSOD.

  In the menu Setup, I ran a hard drive diagnostic and it showed this:

  "RUNNING HARD DRIVE DIAGNOSTICS, PLEASE WAIT...

  DRIVE 0: ST3320620AS

  IN CASE OF FAILURE.  RETURN CODE: 7

  Is this to say that the HD is shot?

  Your hard drive may or may not be at fault. Error code 7 could mean just corrupted hard disk controllers. This could also be the reason for the bsod.

  Enter your bios and follow the instructions below.

  1. start-up (Dell logo), press F2 to enter the BIOS

  2. expand the section "readers".

  3. go in "SATA Operation."

  4 change that "RAID Auto/AHCI" to "RAID Auto / ATA.

  Furthermore, if your bios does not have this option simply switch from SATA IDE mode.

• Unable to start the computer after completing the system scan using Microsoft Security Essentials BSOD error (: 0x0000007B)

  Original title: I cannot restart my computer and start windows after the analysis of the system running and the removal of any bad programs with Microsoft Security Essentials.removing
  I cannot restart my computer and start windows after the analysis of the system running and the removal of any bad programs with Microsoft Security Essentials. I have rebooted, tried to finally start work configiration and back still an error for windows startup. Attempted to enter the mode by F8 safe failed I then chose without auto restart in F8 and get the BSOD - he tells me to search for viruses and run chkdsk/f, but I can't access it. I tried to restart and it still does not work. technical information on the BSOD readings * STOP: 0x0000007B (0xF7ae9528, 0xC0000034, 0 x 0, 00000000 000000000. Please help it is essential to address them ASAP edition)
   

   

  Hello

  You can try the troubleshooting provided in the links below steps to fix the problem.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  http://support.Microsoft.com/kb/324103

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

  http://support.Microsoft.com/kb/316401

• Error message states that Windows cannot read the Service Notification of system events. Unable to start the computer.

  Original title: System Event Notification Service does not connect.

  Computer will not start.  Error message states that Windows cannot read the Service Notification of system events.

  Hi DACL.

  ·        What is the full error you receive when you try to start the machine?

  ·        You did it all change hardware or software on your machine before this problem?

  You can restore the system to the Windows recovery environment and check if you are able to boot to the desktop. Follow the steps in this link to boot into the Windows recovery environment and select the system restore option.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Repairs to the system of Windows recovery environment

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to start my computer from sleep mode

  Usually, I put my computer on mode "Eve". But whenever it try to launch once again he doesn't wake up rather starts it CPU but no display appears on the monitor and the cpu constantly emits a beep. What should I do?

  I use Win 8, 2 GB of RAM (if it helps)

  Hi Pete Modi.

  I can certainly understand your concern. I would like to know the brand and model of your computer. This can be caused because of a problem with the power settings.

  Method 1: Please click the link below to run the troubleshooter of power on your computer (link provided is applicable to windows 8.1):

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Method 2: Check if the network adapter is configured to save energy. If this isn't the case, please follow the steps mentioned below:

  1. Go to the Control Panel, select Device Manager.

  2. In the Device Manager, choose network adapters.

  3. Under network adapters , right-click on the specified adapter and choose Properties.

  4. Under the power management tab, uncheck allow the computer to turn off this device to save power and allow this device to wake the computer.

  Method 3: You can try to reset and restore all the Plans preferred power to their default settings. To do this, please follow the steps mentioned below:

  (a) press Windows + X key.
  (b) select prompt (Admin).
  (c) at the command prompt, type powercfg - restoredefaultschemesand then press ENTER.
  (d) at the command prompt, type exit to quit the command prompt.
  (e) restart the computer and check with the question.
  You also, try to install the latest version of drivers for chipset on the site of computer manufacturer and check.

  You can also see download and install drivers option mentioned in the link below:

  http://Windows.Microsoft.com/en-CA/Windows-8/all-drivers

  For more information, do not hesitate to contact us. We will be more than happy to help you.

• Error CRITICAL_PROCESS_DIED in a blue screen; Unable to start the computer in Mode safe.

  Original title: Critics of the process is dead

  Hello

  Yesterday, my Acer Aspire given bsod with the critical error process is dead.  I am on Windows 8 and cannot enter the old f8 for safe mode to fix.
  I don't have a disc of Windows 8, I downloaded Microsoft 8.  Acer not supplied with Windows 7 preinstalled, so once again no disc.  Microsoft when I asked how do to access safe mode tried to charge me $ 99 more taxes to do this.
  Does anyone know how to access the mode without failure under Windows 8 in does not?
  Thank you

  I usually access SafeMode in this way. Go to made CMD.exe right click and run as administrator. Then type msconfig. When it opens, go to start at the top and then click safe mode. You might be able to do this if you are able to get an installation media for windows8. There is a command-line option when you go to fix your computer. You might be able to do it here because you cannot start windows.

• After downloading a Uniblue program to speed up my computer, I am unable to start my computer normally, I can't move from safe mode

  I downloaded a program to speed up my older computer, the name of the program is Uniblue Power Suite 2011 German society of Cologne.  The program is listed as Microsoft Partner and have been on the Microsoft web site at least I thought.

  I now can not connect to the computer I get an error message when I boot my computer is in Mode without failure for many of my drivers are not working properly.  I deleted all Uniblue programs, but the problem is not going away.

  Error I get is C:\ProgramFiles\Uniblue\SpeedUpMyPC\PYTHON26. DLL

  Because I'm in safe mode, I can't get windows security to work.

  Any help me get out of Safe Mode would be appreciated.

  Hi Apple,

  You can try to boot from your Installation of Windows Vista disc and try to do a restore to system restore point before you installed Uniblue and check what is happening.

  You can read the following article to do the same thing.

  What are the system recovery options in Windows Vista?

  Hope this information is useful.

• Error message when starting the computer in normal mode: btdna.exe

  I get this error during start-up:

  WSA startup failed or if you have the wrong version of the installed Winsock.

  I tried the command prompt, run as an administrator and reset but it not taken care of the problem.  Help, please!

  Hi Amy Shane,.

  Welcome to the Windows Vista answers Forum!

  You can check the following link and analysis online on your computer to verify if your computer is infected with a virus.

  http://OneCare.live.com/site/en-us/default.html

  Step 2: Manually remove BitTorrent from the PC

  1 open the Task Manager by pressing the Ctrl + Alt + Del or Ctrl + Shift + Esc key combination.

  2. go to the processtab.

  3. search btdna.exe and right-click on it.

  4. Select end process.

  5. click Yes when the warning sign is displayed.

  6. close Task Manager.

  7 Click Start then start search

  8. enter C:\Program Files\DNA\btdna.exe / UNINSTALL.

  9. use the search function for all other instances of btdna and also remove them.

  If you are prompted to restart the computer, then restart and reinstall the btdna.exe.

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think