How to replace the gutter while using fluid layouts grid?

Hello

My problem occurs when I try to take two of my divs in the checkerboard to fluid and make them so that they are all built-in. I removed the left margin of the div on the right side and makes the two divs side by side in the designer view. However when I take a glance on the site in IE or Chrome a gap remains between the div where the gutter is to.

I don't know exactly what we call this technique, but I'm trying to get the look that it is beveled and it separates the columns. problem w divs.png Two areas of the circles are where I want the divs to be routed via line side by side with the other. It is supposed to look like this.

correct.png

As I mentioned above, I use the grid to fluid. I don't know there must be a way to move the div is above. However, I believe that the problem may have to do with the "locked" for Gates div. I tried to remove the left margin which had some divs, this seems to solve the problem in DW, but isn't actually once I have test.

I'm fairly new to DW but I was able to pull this off so far and this is the only problem that keeps me from this site to complete.

Another idea I had was to just wrap the 3 layers of content I want to be together and put them in a div that surrounds all 3 and set the background image of the main div to this image. However, the problem with this is that as scales the image down the page is cut and then before you know I do not have the look I want. If there is a way to make the background image to maintain its width and the scale of the page, I think this might be an easier solution.

If anyone has any ideas on how to fix it please let me know.

Thanks in advance

Hello again,

So after a few hours messing around I was able to solve my problem. I'll just tell you guys what I have any pack that is facing the same problem, I got in the future.

After that I had this moment where I expected to find, how have I not think of this before?

Basically if you look at the first image I posted above I put 1 part of the dark line on the left image and the white line on the Middle image. This caused a problem when the page has been updated to the scale about because the sides of the Middle image might get cut and so I lost the look indented.

To solve this, I have simply returned to Photoshop, took all the lines out of the Middle image, and then I put the two lines on the left and the right image. Once I inserted the pictures in DW I had lined up on the left edge (for the photo on the right) and the right edge (left on the photo). This made sure that, even if the sides got "cut" as page scaling, the other would stay in place.

My page is now able to scale properly with the background image remains in the right place.

In addition to "spend addition" gutters and remove rules space, I found that I had to just go into my CSS in each of these boxes and set light to the times, left or right. This definition seems to forget that the gutters were there and so my divs go next door.

Thanks for all the help guys gave. It got me thinking and helped me to find this solution.

Tags: Dreamweaver

Similar Questions

  • How to avoid the brain while using external redundancy.

    Hi all

    When Oracle creates disk to vote who is in external redundancy he writes only in a single drive even if we provide 3 disks for the disk group. In this scenario, what will happen during the expulsion of node. Is there a scenario of split brain.

    Ajay

    Ajay Vijayan wrote:

    I would like to know more about it. How do the multiple vote available in external redundancy disk?

    You can not. If you want three voice files, use a group configured for normal redundancy.

  • How to replace the title of forms using Call_FORM?

    I have two forms, a form and form-b. Form-a call form-b using Call_FORM, and form-a title now is replaced by form-bs' return to form-a. How to replace the wrong title in form - a?

    Jinlan,

    Please read on [Forums label | http://forums.oracle.com/forums/ann.jspa?annID=719].

    Kind regards

    Manu.

    Published by: Manu. September 30, 2009 23:28

  • How to replace the contents of the settings/passwords backup server / current browser bookmarks?

    Classic scenario: after the bookmark long manual organization Firefox Sync adds trash of its server to my laptop or tablet.

    Where can I find how to replace the content of the backup of the server by settings/passwords / current browser bookmarks? Stupid me, I put a new synchronization and lost this ability.

    It is not recommended to go back to the old version of Sync

    The old version is removed he'll stop being available soon, it takes getting used to using the new version.

    IIRC, it is actually possible to force synchronization of the old working with Fx29 & Fx30 using an old profile or preferences of piracy, but I don't think I should encourage users to try this, but it would be better than using an older version of Firefox which is really bad. In fact using an old outdated version of Firefox is so bad, that it is customary to recommend using a browser on alternative day of someone else instead.

    Firefox ESR is aimed at corporate users, definitely, at the moment, it will use the synchronization of the former. Who will update soon to use synchronization well again, and this time, I guess the synchronization of the former will probably totally frowned upon for example are not available at all.

    It is possible to use the feedback system to leave a short comment on Sync. I would recommend this making, but at least to make very many people of spirit comments that I doubt will have no effect.

  • Satellite Pro L50 - a: how to replace the memory, HARD drive and battery

    I just uploaded 2 new video from Youtube on the L50 - A. Satellite Pro

    The first is a tear down showing how to replace the memory, hard drive and battery (you can also clean the fan if it detects overheating).

    http://www.YouTube.com/watch?v=IG0lW7t92bI

    BTW why they made it so difficult to get just to the battery in this model?

    WARNING - proceed at your own risk and don't forget static precautions!

    Hope they help and if you have any questions let me know.

    + The message was edited: link has been removed ad channel may not +.

    Thanks for these videos. It may be useful to replace the memory, but I think that the owners of the laptop should not open the case. This may void the warranty.
    Be careful about this.

  • Qosmio G50 - 10J: how to replace the optical disc drive (ODD)?

    Hello

    the optical drive of my Qosmio G 50 does not work properly, it reads only some movie-DVD, but unfortunately not videogameDVDs at all, so I can't install any games.
    The guarantee is also outdated. So I wanted to ask if it is possible to change the disk myself, if it is then how I had to do and if by the laptop would be in
    risk to get damaged?

    I would be very grateful for each tip and all the help guys can give me!

    Best regards
    a.z.

    Hello

    In various cases the ODD replacement is very delicate.

    If you wish, you can consult this forum category.
    Here you will find some videos how to replace the ODD on the different laptop models:
    http://forums.computers.Toshiba-Europe.com/Forums/Forum.jspa?forumid=115

    This is also a nice Youtube Channel which provides the instructions how to replace the ODD:
    http://www.YouTube.com/user/toshibaeuropesupport

    But the ODD laser lens may be dirty. In my case I could solve similar problem, cleaning the lens of the laser by using a cotton ball and alcohol tip.
    But make sure that this!

  • How to replace the HDD on Satellite 1130?

    How to replace the hard drive in this notebook?

    Hello

    If I remember well HDD is under the optical media drive. Optical media drive is fixed with a screw that you see above the player. Remove the screw and remove the drive from the Bay.

    HARD drive is fixed, I think, 4 screws (probably black). When the screws are removed you can use two fingers to remove the HDD from the connector plug. I hope you now know how to put the new HARD drive.

    Good bye

  • Portege M400: How to replace the pen plastic top?

    How to replace the plastic "pen" at the top of the "pen" (the tool that you use for writing that is specific to this computer).
    I can't find any instructions.

    PS: I want to say that I had to rephrase the question so many times that I get the following

    you mean p * n? He told me that whenever I wanted to write aswell EP *.

    I don't know what exactly you want, you want to replace the tip?
    (if you actuall refers to the Act of writing)

  • How to replace the CPU on satellite A110-252

    I have a satellite A110-252 and need to know how to replace the cpu, hope someone can help you.

    Doug

    First of all there if the new processor would be compatible with the BIOS.
    Second, you should know that a plu CPU produce more heat and this would lead to overheating.
    Are you sure that your laptop would deal with the new CPU?
    I don t think so

    In any case, I found this page:
    http://www.irisvista.com/tech/

    There may be some useful pic and instructions for you

    But once again; If I was you, I wouldn't try it.

  • Satallite A100: How to replace the keys?

    Is there a manual on how to replace the keys once they come out?

    My Satallite A100, a year, lost two keys a few weeks ago, and I am unable to replace them, even if I have all the parts (little). It got even worse when some more broke recently, when my grandson some peeled off, using exhibit created by the keys already disappeared.

    Thank you!

    Hello Mike

    Read your ad I don't understand exactly what is wrong with your keyboard but deleting and creating keycaps (plastic with written symbol) is not problematic. You have to just put this right into place and push it gently. You will hear a click and the key CAP will be back to the square.

    Under this cap is placed small plastic mechanism. It contains two small plastic parts. If they are deleted from the bottom, you can put them inside once again. To see how it looks like to remove any other key cap and see how it is placed.

    I did the same today, and with a little patience you can put it in the right position again.

  • How to replace the missing wireless internet connection icon in the network connections?

    How to replace the missing wireless internet connection icon in the network connections?  My Windows XP installation from the CD on a replacement hard drive did not include this icon to connect to another successful install...

    Hello

    The following article might be useful: How to troubleshoot missing icons in Windows Server 2003 and Windows XP network connections
    http://support.Microsoft.com/kb/825826

  • How to replace the motherboard on the Pavilion p6550z

    How to replace the motherboard on the Pavilion p6550z

    Depending on where you have acquired your replacement Board Aloe, it may be 'tattooed' with the name of the model, product number and the serial number of your computer.

    Use these HP guides as needed.

    (1) unplug the computer and hold power in 5 to 10 seconds.

    (2) on the side of the cover (see guides above)

    (3) place the case on the closed side with the open side facing upwards

    (4) take a photograph detailed inside your computer... take more if necessary

    (5) unscrew the restraint of external expansion card (see guides above)

    (6) disconnect the power supply connections to the motherboard and all devices... tag and/or take more pictures

    (7) remove the... rock expansion cards cards gently just pulling up

    (8) unplug data cables from the motherboard and readers... tag and/or take more pictures

    (9) disconnect remaining USB switch, connections etc... once again, the label or take more pictures

    (10) remove all motherboard screws on the case and remove the motherboard

    (11) reverse the steps, starting with #10 and working #1

    Good luck

  • How to replace the back of device on BB10 button

    I need to replace the device back button (hardware) in one of the pages of my application, that is, I will not allow the user to return to the previous screen, a particular screen - how to replace the action of the button back?

    Thanks in advance

    use a sheet

  • How to replace the 'full' Menu Option and "close".

    Hi all

    I need to know how to replace the full menu option and the narrow, while I don't have a menu option in my class of the screen, and also I do not call superclass «super(DEFAULT_MENU |)» defult builders DEFAULT_CLOSE); »

    can someone give me some samples?

    Thank you very much

    Override the makeMenu() method in your form class and leave it empty.

  • How to replace the battery Microsoft laser 7000 mouse

    I have microsoft laser mouse 7000 battery was dangerously low. I replaced and now used to sync with receiver of ideas?

    keyzoid

    Hello
    You can read the following article and check if it works:
    How to replace the battery Microsoft laser 7000 mouse
    You can check out the following link and check:

    How to replace Microsoft software or hardware, order service packs and replace product manuals
    http://support.Microsoft.com/kb/326246

    I hope this helps!

Maybe you are looking for

  • Trying to update my iPhone 6. It says updated requested 24 hours now. Will not update.

    Trying to update my iPhone 6. The message I get says requested updated. It has been like this for more than 24 hours with no updates.

  • 8.1 recovery error win

    Hello! I'm migrating a spinning disk to a SDS in my HP laptop. I created a USB stick with Ms Windows 8.1 rescure 64-bit and swapped disks. Start on the USB worked like a charm, and the HP Recovery Manager began. I chose the resumption of the factory,

  • Print Spooler service

    Hi when I try to print to a printer network, the error message that comes is "the print spooler service does not. I tried run services.msc and reformulating the spooler but its still does not work, what should I do?

  • My photo files disappeared before my eyes.

    Windows & mcafee scans don't tell me no problems found. After that they disappeared, I had added a few more photos. I ran a defrag, now these files cannot be found or the other...

  • Document library in a confused mess

    Have custom built Scan 3XS, i7 - 2600K, Windows 7 Home Premium and Office 2010 Home and Business. Recently, forced a re - install for Windows 7. Since then, my documents seem to be duplicated (sometimes tripled) and finds it difficult to decide which