8.1 recovery error win

Similar Questions

• HP Pavilion 14-b017cl: follow-up on creating and using the USB key recovery to win 8 after replacing the bad hard drive

  I have 2 hp pavillion sleekbook model 14-b017cl'. I replaced the hard drive in my son after that she doesn't have the "optimized hard drive dst test '. I used my sleekbook work to create a USB stick recovery. I followed the instructions to use the recovery to Win 8 usb drive. When I started the laptop of my son, with the USB stick inserted, I got this message.

  PXE - m0f: exit pxe rom

  no bootable device-insert bootdisk and press a key

  Flash player Flash when I put under tension. I rebooted, you press F2, conducted an audit on the new hard drive, happened.

  Later, I inserted the recovery key in my laptop (that I used to create it) and it would not initialize to top. I checked the content to the flash drive and they seemed "Chargers", so it seems to be what I expected. It seems that the recovery USB STICK will not work if my own laptop dies. What I have to buy the HP flash drive, or I'm doing something wrong.

  Hi @gretschman7,

  Thank you for your query.

  I understand you are trying to perform a recovery from a USB flash drive, but you get the error "pxe - m0f: exit pxe rom.

  "no bootable device-insert bootdisk and press any".  You check the recovery media on your laptop as it is the same model and it seems fine.

  Looks like you may need to change the boot sequence. Here is a link to HP - performing a recovery system (Windows 8) HP computers that will help you.   Here is a link to a YouTube video which can also help:.  Performing a recovery of HP system on a laptop HP with Windows 8.

  Please let me know the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.

• hellohow can I boot my pc with USB {flash recovery}? Win 7 64 bit HP omni 100-pc5120

  hellohow can I boot my pc with USB {flash recovery}? Win 7 64 bit HP omni 100-pc5120

  Thank you.

  Start the PC and read the information on the Welcome screen.

  It should tell you which key press to the start menu.

  On Dell PCs it's F12 on my HP business overall it's F9 of the PC.

  Otherwise, press the F10 key, go into the BIOS and change the boot menu to boot from the USB device first.

• Recovery disks won't be finished reinstalling attract the Windows recovery error

  I have a HP pc only to return some malware a few weeks. Tried to remove it and restart got the Startup Repair. Who ran, but received a message that the problem could not be resolved automatically. Tried several times but without success.

  Then I tried the system restore, which seemed to work. It should restart the process and I got a screen that says Windows Recovery error. Gave me a few options but also safe mode start Windows normally. If so start normally, just screen becomes black and hangs there. I tried in safe mode, a list of drivers starts, then stops at crcdisk.sys and I get a box that says that I can't get into safe mode because Windows has not finished the installation.

  Then I tried the HP recovery disks to restore the factory settings. Crossed reinstall it without problems and clicked on Finish to reboot and continue. It goes through the process some, restarts a few times and the final reboot immediately comes the same Windows error recovery screen. I tried several times and made sure the only cool things are the monitor, the keyboard, the mouse and the cord. I also tried to remove one of the memory two sticks and the sound card that is not the original. Memory sticks are original.

  I thought it was the failure of hard drive and bought a new one last nite and was installed. Ran the recovery disks appeared once again, as he worked but got the same error Windows Recovery screen after a reboot.

  Any ideas of what I can do? I can't go in safe mode at all.

  Thank you!

  Edit - I forgot to mention that I have managed to get into the manufacturers menu and delete the original hard drive and tried to do the reinstall, but got the same error.

  Fixed it got! Found the answer in another thread here. It's a problem witht Nvidia Geforce card I have and the DVI output. Think an update or something hit malware but all I had to do was remove the video card, plug a VGA instead of DVI cable and I was able to complete reinstall it! Everything works except the sound now. Trying to get that fixed and reinstall the video card later today.

• Windows Recovery error screen: cannot get my computer to start!

  After using my computer for a long period of time, I set it down for a few hours. When I put it up again, the screen was blank and I couldn't get out of hibernation. I manually turned off and restarted. Reboot, I had the Windows recovery error screen, where I was given the opportunity to 'launch Startup Repair' or 'start windows normally '. At the launch of the repair, the screen empties for a few seconds and returns to the error page. When you try to start windows normally, the system rebooted and returned to the error page. I did nothing durastic which would result in this error. Windows was preinstalled and came with any disks. How can I fix my computer and recover my files? My computer is a laptop Gateway MD.

  Have you tried from disk running of all of the above programs.  Of course, some of them managed from the disk as the Startup Repair and system restore.  Others such as SFC and chkdsk or event viewer can be run from the disk by using the command line option (and instructions above on orders to enter).

  Startup Repair and system restore has nothing to help?  Try these other options from the command prompt on the drive if you can't even in Mode safe (which is not a good sign).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• computer laptop dv4 1430 cannot start window and recovery ERROR 1002

  Sorry my English not just

  I have a problem to start my laptop.

  OK, when I turn on the power it lunch START REPAIR > system recovery options > Next > Startup Repair is checking your system for ploblem >... long... when I select restart or shut down , but STILL go to > LUNCH new STARTUP REPAIR

  or when I choose the Recovery Manager >> System Recovery > factory image recovery > ERROR 1002 Please contact HP support...

  Now, I need to open the window and how to do it.

  Please take care of my issue and I hope you understand my question.

  Thank you very much

  Jak

  Hello

  This process will allow you to do a Vista repair disc. This isn't an installation disc, but will allow you to use the Vista Recovery Console that is available on commercial versions of Vista.

  Download the file from the link below.

  Vista 64-bit

  It is a zipped file.  If you do not have an extraction utility installed, download and install 7-Zip, when installed, right-click on the zipped folder, select extract files and then click Ok.  You should now see another folder containing the ISO file.

  You will need software to burn the ISO to a CD.  If you don't have that guy on the software installed, download and install ImgBurn and use it to burn the ISO to a CD.

  Once you have created the Vista repair disk, follow the guide on the link below to see if it undertakes to repair your installation - you may need to run this several times.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html#

  Kind regards

  DP - K

• If I get the dvd of recovery to win s 7 of the manufacturer, what problems is I meet when I try to boot from a usb dvd player

  Separated from this thread.

  OK here is what I was asking.  If I get the dvd of recovery to win s 7 of the manufacturer, what problems I will get when I try to boot from a usb dvd player.  I worry because my computer is uefi firmware. should I disable secure boot, make sure the dvd usb drive first in the boot order.  What other bios setting I would be worried.

  You will get a facility better if you find the ISO to create such media as discussed in step 1 of the clean reinstall Windows 7 follow these steps to get the best possible installation.  You can even create flash media if that's easier for you.

  Regard to Recov disks that reinstall all the bloatware factory, Yes, you must disable Secure Boot in firmware that doesn't support UEFI to install Windows 7, and then start the media as a UEFI device.

  After installation, you can pick up some performance and optimize the installation by following Clean Up Factory Bloatware .

  You can also do a Clean install Windows 10 improvement using the Windows 7 product key, as this is explained in this link.   You can at any time change to Windows 7, even move back and forth until only is installed at the same time.

  Let us know if there are any questions and how it goes.

• Rescue and Recovery to WIN 7 - T510

  There is a Rescue and Recovery to WIN 7 (32 bit) - T510?

  I need to back up data, but there is none that program!

  Can I use one for vista?

  Anyone? ]

  DS, welcome to the forum,

  Rescue and Recovery® 4.3 by Lenovo on the TVT matrix site.

• ORA-01033 and ORA-01113: file 1 should support recovery errors

  I ORA-01033 and ORA-01113: file 1 needs media recovery errors, I tried using the Recovery Manager to without result I got after a long wait of cataloging files... is ORA-19870: ERROR READING BACKUP PIECE, ORA-19501: READ ERROR ON LINE, ORA-27070: ASYNC READ/WRITE failed, OSD-04016: ERROR QUEUING ASYNCHRONOUS IO YEAR ASKS... then... switch to the previous backup... then RMAN-00571. 00569; 03002; 06026; 9 06023: I've exhausted all the advice that I know... PLS HELP

  Start rman and connect to the database

  rman target /
  

  Once connected, run

  list backup;
  

  If you don't find listed backup, you can use the catalog command to manually add information rman backup in the rman repository
  http://docs.Oracle.com/CD/E11882_01/backup.112/e10643/rcmsynta008.htm

• Dv7-6b57NR system recovery error ' The Recovery attempt failed.

  I hope someone can help me with the following problem.  I bought a DV7-6B57NR of a sale by auction online (not Ebay) and they said that they removed the BONE using a program called 'Blanco', because it is a returning customer and they wanted to clean up before data of re - sale.  I ordered recovery disks from HP by product and serial number in order to restore the operating system.

  SN - [removed for privacy]

  PN - A1785UAR #ABA

  I received three recovery DVDs.  2 DVD system recovery and recovery of Driver and Application 1 dvd.

  I tried to restore factory reset.  The process took 30/40 minutes and installed all three discs.  Then the laptop has rebooted and started to load windows, windows 7 logo came and went through more than a few steps.

  Finally it came to a window (Recovery Manager) with the following msg

  "The recovery attempt failed.  Select one of the following buttons"

  There are three buttons

  Save log |  Details |  Retry

  The following is details.  Something attracted my attention is, see below in red (my version of Win 7 should be Home Premium 64-bit).  HP sent me DVDs bad?  Any help will be greatly appreciated.

  --------------------------------------------------
  [11:46:24.29] enter audit OS Edition...
  ----------------------------------------
  [11:46:24.31] check RStone.ini file to determine the required edition.
  [11:46:24.36] out of checking OS Edition...
  --------------------------------------------------

  --------------------------------------------------
  [11:46:24.37] controls if the upgrade to Windows 7 is required.
  ----------------------------------------
  [11:46:24.39] current edition is [HomeBasic]...
  [11:46:24.39] [start] necessary. Don't need to upgrade...
  [11:46:24.40] [Starter] needed...
  [11:46:29.08] necessary [Starter] edition. But is not the case of the [Starter] OS...
  [11:46:29.08] OS edition upgrade might have a problem...

  Management and maintenance of deployment images tool
  Version: 6.1.7600.16385

  Image Version: 6.1.7601.17514

  The current edition is:

  Current edition: HomeBasic
  The operation completed successfully.

  Component: TDC Preinstall diagnosis Tools for Windows 7 - TDC
  --------------------------------------------------------------
  Error: no OS flag not set on the device, please use EEPROM to set ~ OS SKU ~ value = 2
  [11:47:20.87] ------------------------------------------------------------------------------------------
  ...
  CTO error condition has been undergoing dtected [update Factory]! ***
  [11:47:20.87] Suggest create PIN-journal and send to TWN PDC NB-PreinPM for further analysis...
  ...
  [11:47:20.87] ------------------------------------------------------------------------------------------

  [11:45:23.44] Start BBOffline.cmd...
  UPDrv = [C:]
  [11:45:23.45] value UIA 951 error Code
  [11:45:23.77] WinPE is 32-bit.
  [11:45:23.78] start [corrections].
  [11:45:23.80] ---------------------------------------------------------------------
  [11:45:23.80] FixUps.cmd...
  [11:45:23.81] create overall progress information...
  [11:45:25.42] complete FixUps.cmd...
  [11:45:25.42] ---------------------------------------------------------------------
  [11:45:25.42] start [Tweaks for SDRD].
  [11:45:25.42] ---------------------------------------------------------------------
  [11:45:25.42] SDRD Tweaks to change the regional settings default user...
  [11:45:25.43] copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES. DLL.
  [11:45:25.54] Run "Dism.exe image:C:-/ Set-SKUIntlDefaults: en - U.S.-image: C:
  [11:45:33.16] ---------------------------------------------------------------------
  [11:45:33.16] start PININST.exe for offline...
  Housing starts [11:45:47.17] [Sleep 10 sec].
  Starting price [11:45:57.23] [creation RStoneFUpdate.INI].
  [11:46:09.94] start [create 1 GB Pagefile for offline].

  Volume in drive C has no label.
  Volume serial number is 945 B-A81C

  Directory of C:\system.sav\bbv

  05/10/2012 11:46 1 073 741 824 pagefile.sys
  1 file (s) 1 073 741 824 bytes
  0 44,736,749,568 dir bytes free
  [11:46:10.02] the mark detection.

  [11:46:10.28] ---------------------------------------------------------------------
  [11:47:01.27] Start SysID Check...
  [11:47:01.98] Start Option control code...
  SKU_DEF_COUNTRY = [244]
  SKU_DEF_SYS_LOC = [en]
  ------------------------------
  Reset the country in administrator...
  ------------------------------
  ------------------------------
  Reset the default user countries...
  ------------------------------
  ------------------------------
  System reset located
  ------------------------------

  Management and maintenance of deployment images tool
  Version: 6.1.7600.16385

  Image Version: 6.1.7601.17514

  Statement of the international settings offline.

  By default system UI language: en-US
  Settings system locale: en-US
  Default time zone: Pacific standard time
  The settings for the default user regional: en-US
  Location: United States (GEOID = 244)
  Active keyboard (s): 0409:00000409
  Keyboard layered driver: PC / AT Enhanced Keyboard (101/102-Key)

  Installed the language (s): en-US
  Type: Fully localized language.

  The operation completed successfully.
  ------------------------------
  Updating the system locale info...
  ------------------------------
  [11:47:15.98] Start PIN Tweaks...
  [11:47:16.01] ---------------------------------------------------------------------
  [11:47:16.01] PIN Tweaks to hide all for BurnBoot PBO and BBV2 on restored image...
  [11:47:16.01] ----------------------------------------
  [11:47:16.01] Tweaks to Unattend.xml of OOBE
  [11:47:16.01] to pick up the right file...
  [11:47:16.01] ----------------------------------------
  [11:47:16.01] rename unattend.org to unattend.or_
  [11:47:16.04] ----------------------------------------
  [11:47:16.04] without light sensor...
  [11:47:16.05] ----------------------------------------
  [11:47:16.07] it is restored by SDRD [SSRD.flg] image...
  [11:47:16.07] ---------------------------------------------------------------------
  [11:47:16.10] Start MIR Tweaks...
  [11:47:16.15] ---------------------------------------------------------------------
  [11:47:16.15] [MIR Tweaks]...
  [11:47:16.15] ---------------------------------------------------------------------
  [11:47:16.18] starting factory updates...
  [11:47:18.02] installation start QFE offline...
  [11:47:20.69] PININST_OFF: PAST...

  [11:47:20.73] Type C:\System.sav\Logs\BBFindEr.log...

  [11:47:20.75] Type C:\System.sav\Logs\BBFindE0.log...

  -C:\SYSTEM. SAV\LOGS\PININST_OFF. JOURNAL
  Result = PAST

  [11:47:20.78] Type C:\System.sav\Logs\BBFindEr.log...

  [11:47:20.78] Type C:\System.sav\Logs\BBFindE0.log...

  -C:\SYSTEM. SAV\LOGS\BBFIND4QFE. JOURNAL
  [11:47:20.80] FUList.log to check if there are double Desc...
  No duplication.
  [11:47:20.86] duplicated No. Desc is located... PAST.
  [11:47:20.87] there was no update from the factory...

  You are the very welcome.

  You will only be able to install programs available on the page of the driver and support for your laptop.

  Use the Windows backup tool to create a system image and save it on a portable hard drive.

  Use the dvd or flash drive bootable do you reinstall windows from the recovery image by selecting the repair option you will find on the installation screen.

• Error Win 7 - display driver stopped responding

  Windows 7, 32 bit, during normal use makes the sound of a detached USB device and then the screen goes black.

  After a few seconds the screen back again, but the computer responds to nothing; then the screen goes black again. This error message is displayed: "driver Intel Graphics Accelerator display drivers for Windows Vista (r) stopped responding and has successfully recovered."

  He has no option but to manually shut down the computer.
  I've updated the display driver and bios, but it happens still 3 to 4 times per day.

  Hello

  You have a Windows 7 preinstalled on your laptop

  But the error message means that:
  > Intel Graphics Accelerator Drivers for Windows display driver Vista (r) is no longer

  Seems to graphics card driver Vista is installed on Win 7 OS.

  Maybe you should remove the Vista display driver and install a graphics driver for Win 7.

  Welcome them

• # 500-164 HP model: backed up my files in 2 external hard drives, and then made recovery, came back and recovery error

  I saved my files to two external hard drives and then did a recovery.  After the end of the recovery, it says error recovery and no change to the computer.    I left that screen and booted up, but the computer does not go to the lock screen.  Circle of HP logo lights up and goes, but nothing happens.

  How can I get to the lock screen?   I have tried F11 and Esc.

  BreBruce-Tampa

  Your post shows your PC than the execution of win10, but it comes preinstalled with Win8x.  This means that at some point, you've done setting at Win10 level, and unfortunately, that corrupts the information of HP recovery: HP Recovery Manager blocked after Windows 10 Upgrade - HP Support Forum's - 5170752

  Once you do this upgrade, the ONLY way to perform a recovery after that use HP recovery media.

  Ordinarily, I advise to use HP recovery media to restore your PC to its original state. That would erase the entire disk, format the drive and install the operating system, drivers and utilities HP.
  
  Unfortunately, there is no support of HP recovery related to HP for your PC Product Page. This could be an oversight by HP, or it could also mean that HP stock is no longer the recovery media for your PC.
  
  You can try to contact the HP customer directly, using the links below, to see if you can order them if:

  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

  ---------------------------------------
  However, HP customer care is generally not available on weekends, so you will have to wait until Monday to contact them.
  ---------------------------------------

  If HP no longer provides a recovery media for your model, a few other sites, you should check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  Good luck

• Recovery error on the L955D-100 Satellite 00003

  Hello
  I tried the recovery procedure, but when it comes to 31% it gives error recovery 3.

  (1) what can I do?
  (2) if I change the hd will be the recovery procedure still works fine?

  Thank you

  Post edited by: mevangelista

  A question: did you create recovery media and try to install the recovery DVD or USB recovery image?

  In my opinion you shouldn't change anything. I assume that your laptop is guaranteed valid so I think you should contact Toshiba service provider and ask for help. If there is a problem with the HARD drive, you should get a new one for free.

• recovery error code: 0xe0ef0003

  When I tried to recover windows 7 recovery DVD that I created from the recovery partition, I got the error code: 0xe0ef0003 and the PC did not run windows again, so I can't start it anymore, the model is HP G62-121EE... Please help. I think that the problem is not a software problem.
  
  Thank you

  It could be other material causing the closure downwards during the test, unfortunately there is no good way to understand what it is, you may have to send in repairs or try another hard drive to see if that solves the problem.

• Drive HARD on Satellite L750-22Z recovery error

  Hello

  I tried to do HARD drive recovery. It was fine until instaliation. And after the 1% error message (1117) maybe someone knows what is a problem?

  How do I recover HARD drive without errors L750-22Z?

  > How to HARD disk without errors L750-22Z recovery?
  Very interesting question. If the recovery image is ok there is no reason for the message error.

  Did you create the recovery disk?
  If so try to install the recovery image using the recovery disk.