How to restore from a backup

Similar Questions

• How to restore from a backup after creating a new Raid 0?

  OK so I have time machines of my old hard drive, installed my new and raid 0' ed them. Now I Steelworkers my bootable thumbdtive (who was be Yosemite) to start my el capitan backup and it crashes at the end. After the restoration, the computer stops and recharge, but then crashes to the screen with the apple logo. Someone knows the right way that I should be restore? I tried just do a plain redownliad of my bootable disk but it says it did not work and may have been corrupted. I tried deleti g and recreate my raid 0, the same message... Looks like that because raid 0 for Mac will not create a recovery partition, I do a recovery Internet now just to recharge the mac from scratch... Any ideas on how I should address?

  Hi Isakale,

  I understand that you're having trouble for OS X installed and restored from your Time Machine backup. In a situation where you work with a configuration of non standard volume for your OS X installation, you can consider installing OS X of the recovery of the Internet, the upgrade to the desired version of Mac OS X via the App Store, then your Time Machine data migration using the Migration Wizard, rather than recovery.

  Migration Wizard copies all your files to your new Mac so that you do not have to the do it manually. If your files are currently on a Windows PC, follow the steps in the migration of the PC instead. If your new Mac uses OS X Mountain Lion or earlier, follow the steps of Mountain Lion instead.

  Move your content to a new Mac
  https://support.Apple.com/en-us/HT204350

  Recent Macs include the ability to run directly from a Web OS X Recovery version. Your Mac will automatically use this feature when the recovery on the startup disk system is not available. For example, if your boot drive is a problem, or if your boot drive has been replaced or deleted. Recovery of the Internet allows you to start your Mac directly from Apple servers. This system starts running a quick test of your memory and the hard disk to check for hardware problems.

  Recovery of the Internet initially asking you to select a Wi - Fi network and enter a password for the network if necessary. Then Internet recovery downloads and starts from a system recovery image. From there on, offers the same options and utilities like system recovery on a startup disk.

  Some Mac shipped with OS X Snow Leopard can use Internet after installation of OS X Lion or later and a software update.

  OS X: on OS X Recovery
  https://support.Apple.com/en-us/HT201314

  If you want to reinstall the version of Mac OS X included with your Mac, store the command-Option-R at the start instead. This starts your Mac recovery of the Internet.

  How to reinstall OS X on your Mac

  https://support.Apple.com/en-us/HT204904

  Sincerely

• Help restore from iCloud backup iPod touch iOS 6.1.6

  Do to restore an iPod touch from backup, using iOS 6.1.6?

  Yes, as long as the device that does the backup iOS 6.1.6 and during restoration iOS 6.1.6 or later

  To restore backup see:

  Restore your device from an iCloud or iTunes backup - Apple Support

  https://support.Apple.com/en-us/HT204184

  If you restore from a backup of iCloud apps will be automatically downloaded. If you restore from backup iTunes, applications and music must be in iTunes since synchronized as music media library and apps are not included in the backup of the iOS device what iTunes does.

  You can re-download most of iTunes purchases by:

  Download after purchase from the App Store and iTunes Store iBookstore

  https://support.Apple.com/en-us/HT201272

• Restore from iTunes backup application corrupted

  I have an update application that can be bad and want to restore from a backup iTunes just that App. Is this possible and if yes, what is the process?

  Thank you. Best regards, R.J. Wilson

  Synchronize the iTunes app.  You may need to remove the application on the device first otherwise iTunes may think it's already there.  If it is a current application, you can also re - download it directly from the iTunes Store with your device via iCloud.

• Cannot restore from a backup

  I cannot restore from a backup and don't know why.

  I have a Crucial SSD of BX100 in my mid 2010 MacBook Pro. It is divided into two partitions. I got Snow Leopard on a partition and Yosemite on the other. For some reason any I've never understood the Snow Leopard guarded beachballing partition. This happened if often that I decided to wipe the disk and reinstall from my backup, do it before the beachballing began to occur.

  But I can't restore. I wiped the drive of a Snow Leopard system, repaired and reformatted. The drive is not Core Storage, this is Mac OS extended (journaled). When I try to restore the restore on it works for about two minutes and then stops. Finally, I get a message saying that the disc has been ejected incorrectly.

  I noticed that when I receive information on the drive, an element appears different from other readers and which corresponds to the element, owners enabled: no each other drive I've seen says owners enabled: Yes. Is it all just because there is no system on the partition?

  Also "ignore ownership on this Volume" must be checked or unchecked?

  Suggestions welcomed, I am baffled by this.

  Snow Leopard erase and install

  1. Insert the Snow Leopard DVD in the optical drive and restart the computer.
  2. Immediately after hearing the chime hold down the C key.
  3. Release the button when the Apple logo appears and wait for loading to complete.
  4. After the installer loads, choose your language and click on the continue button. When the menu bar appears select utility drive in the Utilities menu.  After disk utility charges select the entry out-bumpy in the list aside (mfgr. size ID and disc drive.)  In the right side of the disk utility window, click the Partition tab.  Set the number of sheets to (1) on the menu drop down. Click the Options button and select GUID, click on OK, the value of the Mac OS Extended journaled format type. Finally, click on the apply button.
  5. Once the format is complete, quit disk utility.  Continue with the installation of OS X and follow the directions.
  6. Once installation is complete, the computer will restart in the installation wizard. After completing the Setup Wizard, you will use a new installation of Snow Leopard. Open the software update and install updates recommended.
  7. If you plan to sell or to give to your remote computer, then proceed as follows: once you reformat your hard disk and reinstall Snow Leopard, the computer restarts with a welcome screen. To leave the Mac in a State OOTB (Out Of The Box), do not continue with the Setup program. Instead, press the command and Q keys to stop the computer. The installation wizard will guide you the new owner through the installation procedure, after that it turns on the computer.
  8. Download and install Mac OS X 10.6.8 v1.1 updated Combo. If necessary. It is not necessary if you are selling or giving your computer away.

• How to restore a previous backup on a new install of XP Pro and HARD disk?

  I have experienced HARD drive failure last week and has spent a lot of time trying to retrieve the data. I have a previous backup on an external drive, but when I try to restore the files to a new HARD disk with a new installation of XP Pro - files copy them all, but none of the programs or features network work?

  I was going to just to reinstall everything from scratch and just use the recovered data and log files after all the programs I use for my business back... Is there an easier way? Why Windows does not support a backup feature when it does not replicate the system on a new HARD drive correctly or I do something wrong? I can access is no longer the disc HARD death after that I got everything I could out of it (2 x backup and a copy of all important files) before it just completely fried.

  I bought a new HARD drive and installed XP then tried restoring the system to a new HARD disk and all the files are there, but not where they all should be (My Documents is empty and aka 'Of Joe Documents' are stored in a separate folder elsewhere in the new HARD drive) and none of my programs work properly - my antivirus software (CA Security Suite 2009) is , but continues to tell me that none of this is installed. Microsoft Office does not work - tells me that it's just a trial - and Outlook will not retrieve my emails, Outlook looks like not even the same. None of my networks will work with other office machines, but somehow, I have access to the internet through the network...!

  I have to format the new HARD drive in the same directory that the backup was of? (he's currently: / instead of C: / for some reason any) And the name of the account PC should be accurate? (he is currently Documents of Pete Peter's Documents instead).

  I feel blurred by microsoft because I myself prepared for something as it happens and now my company is still paralyzed because the backup does not restore the functionality of my system. Please tell me if I did something wrong and I don't have to buy all my software licenses again after reinstalling ALL my software that has already been restored from a backup. I spent the last few days to Google search without result.

  Hello
  the only problem with restoring a backup, it's that the hd would be slower than a new installation
  you bring all the baggage (junk, dup files, etc.) as well as the good things with it...
  If this post can help solve your problem, please click the mark as answer check on this page it helps people who need quick access to answers THANKS AND GOOD LUCK

• I did a clean install of Mavericks and CC restored from a backup, and can not get one of the applications to load at all.

  I did a clean install of Mavericks and CC restored from a backup, and can not get one of the applications to load at all.

  properly install adobe products.

  at this point, just uninstall cc on your computer, clean by use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6 then install the application of office cc, https://creative.adobe.com/products/creative-cloud

  Use the desktop application to install your programs of cc.

• How can I backup files, and then restore from that backup AFTER reformatting?

  in the past, I tried to restore files from a backup, I did just before reformatting. but when I tried to restore the files, the last backup information obviously wasn't there, so I could not restore the backup on my external hard drive files. I don't remember the exact message I got, but I think it went along the lines, "unable to find a current or previous backup for this computer. You might have changed hard drives or computers or devices to backup since your last backup, or files you want to restore are from another computer. ». Fortunately I saved stuff that was really helpless as my photos, music and game configs.

  so is it possible to run a backup, reformat the computer, and then restore the backup Dome before reformatting?

  I hope someone can help!

  -Graham

  Hello

  ·          You did a normal backup or was it a complete PC image backup?

  Clean boot the computer and then try to restore

   

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual by following step 7 of article.

• Restore from a backup

  Hello

  I'm new to UCS and I currently see how to restore a Cluster FI from a full-State backup.

  After that I have clear the configuration on both primary and secondary, I import the configuration of my file backup successfully.

  But now, I wan´t to add the secondary FI. After start of the console configuration and answered to the question if I have wan´t at the END added to the cluster with Yes, nothing happens. She takes one our to complete the installation of the second home. It seems that there is a timer or something like that.

  Is there any command that I can use on my primary FI to reconnect to the secondary or do restore much faster?

  Thanks for your help

  Frank

  Hi Frank,.

  You do well, the process to add a second FI after the restore of a backup can take time sometimes.

  The last time I have made I've waited almost an hour without any message until finally complete the process. Unfortunately, there is no command to display a progress bar or status messages.

  Richard

• restore from RMAN backup

  Hello
  
  We communicated in code. For this we will have option rollback is that take a full RMAN backup and restore the backup in the database. This is to check if we can able to recover the database before the output of code.
  
  10.2.0.4 database
  AIX OPERATING SYSTEM
  
  There is no change in the locations of the files (control file, file data, all). on the same server and the same database.
  
  Just to recover from a backup.
  
  can you tell me how we can get there.

  Hello;

  RMAN point to the recovery time.

  Example of

  Connect to RMAN
  
  RMAN> startup mount;
  
  RMAN> restore database until time "to_date('5-NOV-2012 11:23:00','dd-mon-rrrr hh24:mi:ss')";
  
  RMAN> recover database until time "to_date('5-NOV-2012 11:23:00','dd-mon-rrrr hh24:mi:ss')";
  
  RMAN> alter database open resetlogs;
  
  Note:
  
  You should perform a full backup.
  

  Best regards

  mseberg

• How to restore the rman backup file

  Hello world
  
  I have the rman backup file by cutting the rman full backup of a file week rman to orginal path to another disk because of disk space is low. I need to know how to restore this file to the database. Can someone help me please.

  Hi, try as

  RMAN target sys/pass
  Catalogue start with 'rent' (which you moved from backup files)
  restore the database;
  recover the database;
  ALTER database open;

• You forgot to turn off pairing Apple Watch - I can restore from a backup of Icloud?

  Hi, I have a 1st generation Apple Watch Sport 38mm.  Recently, I sold my 6 s Iphone in anticipation of the arrival of the Iphone 7.  In my haste, I forgot to turn off my Apple Watch match before sending it away.  I have been using a loaner phone while I was not able to restore from Icloud because it doesn't have enough memory so I have just set up as a new phone.  When I paired my watch with her that I had to reset as I was not able to select a backup (because it's not because I didn't have it odd).  I'm afraid now that I've lost all my previous data.  Do you know that if I can restore my Apple Watch from a backup to Icloud - I won't be able to try this until I get my new phone, but just pray that I can choose a backup for my watch from my phone when I put in place?  Thank you very much

  Hello

  When you pair your watch with your new iPhone (after restoring your backup to iCloud), you can choose the option to restore from backup if he is offered throughout the entire upward:

  Set up your Apple Watch - Apple Support

  (There is no backup separate from your watch - it is part of your iPhone backup).

• If I buy a 6s and restore from a backup on computer, I also get old iOS?

  I have 8.3 on my current iPhone 6. I'm considering upgrading to a 6 s iPhone, but I don't particularly like iOS9. If I restore from the back up on top of computer, will I have the old iOS? I don't think that it really works it, but I'm not positive. Thank you!

  No, you will not get the previous iOS, only data from the backup.

  See you soon,.

  GB

• Could not open the photos restored from a backup

  I can't open the photos restored from an external hard drive.  Error message says I don't have permission to do so.  I have check everything that I can think of and I am also the administrator of the computer.  Can anyone help?  I spent at least eight hours trying to solve this problem.

  Have you thought to take possession of the files?

  Check the permissions of the file or the folder that the file is saved in. Here's how:

  Right-click on the file or folder and then click Properties.

  Click the Security tab.

  Under group or user names, click your name to see the permissions you have.

  To open a file, you must have the read permission. For more information on permissions, see permissions are?

  Ref: http://windows.microsoft.com/en-AU/windows-vista/Troubleshoot-access-denied-when-opening-files-or-folders

  or: http://technet.microsoft.com/en-us/library/cc753659.aspx

  or: http://support.microsoft.com/kb/308421

  Please indicate in the future this operating system of Windows that you are using etc.

  And to post on this forum, please visit: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/1467f44b-ee27-4f7d-98d7-f1c4b35b3395

  Thank you.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• How to restore from unspecified error

  original title: restoration does not end because of the unspecified error-how I restore?

  Cannot restore to an earlier date when I did not / had no problems. For instance - where I had an icon on the home page so when iwas going to e-mail back to the home page that I could click on it and the homepage would come to the top. Can't do this nw - my address book has also addresses in it, but when I try to send an email and click on the bar addresses appear not. I thinkif I could restore to an earlier date, everything would be ok, but can be a problem.

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the workSafe Mode with network.

   

  To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner