Two "wait for Notification" with notifier unique?

Similar Questions

• A Raw of Canon S120 file is supported in Lightroom 4.4 or am I being forced to upgrade or wait for support with this version?

  Use and love Lightroom 4.4.  Tried to open the RAW of Canon 120 format. CR2 and get error / unsupported messages. On Adobes great little table, I see that I need a newer version to use my S120. Am I obliged to being upgraded to use my camera in RAW, or is there some support or correct to use my camera and the version without an expensive and useless upgrade. If I wait for support will be added or available somehow?  If so how do I know or get it? What about Tom

  Support for the camera will be added natively 4.4 Lightroom. This version is now history and is is no longer updated by Adobe. Lightroom 5.3 or newer version is required to open raw files. However, Adobe provides a free DNG Converter that will allow you to create copies of these raw images that can be opened in the Lightroom that you now DNG. So, Yes, there is a method that is provided for you to work on this camera raw image data.

• Update download is not download... continues to wait for hours with no done download?

  Running Windows 7.  More recent batch of updates of windows (the current number is 87) pass not on my computer.  Check the internet connection is good.  Is there something in my system which must be enabled (or disabled) to allow downloads to get out?  Running PC Matic, protection against viruses and tried with the two up as well that suspended protection but no change or affect.  At a loss for what to do to allow upgrade downloads to get out.

  Windows 7 update problems? First read this.

  :)

• Envy 17: update waiting for download with windows 10

  I have many updates Windows download up to 1 day. My PC is new and using Windows 10.

  Could you please help?

  OK, let's make sure I understand the problem...

  You are already using Win10 and you try to make the Office updates, but stops the download of updates to half way through and is not complete - you with the error message.

  Right so far?

  There is nothing you can really do about updates in Win10 regarding control of who you get or when you get them.  MS took these feautures away from us with Win10.  With the Home version, you have no control; but with the Pro version, you can delay, but not indefinitely.

  All you can do is keep going by train.  Finally, the PC will download all Office one updates apply to them.

• What waiting on Notification (of all types) is currently pending?

  I may have a blockage of the waiting on the notification. Until I use the marine method (beat to adapt, to match the paint) by changing a lot of Wait-on-Notification-with - history of WoN, it would be great just to be able to see who is currently waiting to be WoN. In this way, perhaps I could see who WoN were involved in the deadlock and therefore rethink my model of data flow. I have not found a nail tool WoN the list won, etc.. But it would be really handy.

  Info or ideas?

  The execution trace toolkit can show you who is waiting (or at least in which VI). I haven't used so I'm not sure.

  Another possibility to process this code is to use a timeout and do nothing if the timed out is true, but it is most likely that's going to be a hack instead of a real solution in your case.

• Waiting on Notification of the Multiple is the same with or without history

  I'm running this VI on a cRIO-9066, and two functions "Wait" the same behavior. After reading the help of LV, I expect with "notifier history" one to return an array of two elements, not one. Is this a bug?

  (Attachment is LV 2014 SP10

  Staab_Engineering wrote:

  When he comes back is less interesting than what it returns with. I expect the entire purpose of "with the story declaring" that he would return a value for each registrant, to condition, not only a value for the first hit. The first is the behavior I want, so I can write a loop to wait at a time on two filers and find out who shot first.

  It returns a value for each alert system who shot between waiting for him. If one of the authors of the provided notifications does not fire, then it will not have a value.

  To determine the one who fired first, you can use the notifier out output and status. (i.e. the first element of the notifier out output is the declarant who shot first)

• Extend my extreme network with another extreme - waiting for internet access

  Hello - I have a new generation Airport Extreme (let's call it Extreme1) connected to a Comcast modem and it works very well. The extreme will be the router that the modem has no router function. I'm trying to expand my network to another room with another extreme (let's call it Extreme2). I have a connection cable between two rooms. Extreme1 has an ethernet cable from one of its LAN ports connected on port WAN Extreme2. When I try to create a new network with Extreme2 (in aid of the same name, passwords, etc.) it does not work. He was suspended at the end when he is looking for a connection ("Waiting for internet access")-I did the following things based on what I read here:

  1. Changed IPv6 link local parameters
  2. Tried the whole upward on my Macbook and tried on my iphone
  3. The Wan first and then tried to change the configuration after you done for Extreme2 by creating a network
  4. Tried to create a network with Extreme2 connected directly to the modem
  5. Extreme2 factory reset after every attepmt

  And nothing works. Kicker is, I also have a reasonably new airport express and the same thing happens to her as well.

  Do I need to adjust some parameters of network that I'm not aware of? Is it possible that my LAN ports are disabled on Extreme2? It is brand new.

  Thanks for any help.

  Have you used the Apple Setup Assistant?  If you did, it had notified you that the extreme second was being configured "add using Ethernet. The wizard will automatically configure the second airport with the appropriate settings for you.  All you have to do is enter a name of device for the second AirPort Extreme.

  Here I'm assuming that you reset the second extreme to parameters by default until you set it up again and that your second Extreme is the current version of the "tower" or that of previous versions "flat or square.

  The example below shows an AirPort Express as the device which is the extension of the network, but you will see the name of your network and AirPort Extreme on your configuration screen.

  Post back if you need some tips on using the "Wizard" for your configuration.

  

• remote desktop hang at 'Please wait for the system event notification' during logoff

  When I disconnect a remote connection, sometimes the GET logoff screen stuck at "Please wait for the system event notification" next time I try to open a session.
  This can also happen if that I disconnect the user, but the user seems to weigh on this same screen as well.

  There is a particular difficulty for this?  I can connect as long as administrator to another account, I can't kill connection attached somehow to be registered in the next time?

  Thank you

  Hello

  I suggest you to take a look at the answer in this thread and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/Sens-could-not-connect-to-the-system-event/4e5a04e9-88f8-4017-9416-2ca67c5ce7c5

  Hope this helps,

• Wait for the update not associated with the previous update

  Just something VERY disturbing happened on Windows 7 PRO.

  When I started my machine today I received the notice:

  "Waiting for update complete"

  100%

  Do not log off the coast... (Sorry was not able to copy the exact message)

  The problem is that I shut down my computer early Sep 30,2015.

  My last update was the Sep25, 2015

  and it's around 23:00 UT 30 September 2015.

  Nothing should be changing my machine without telling me he'll do

  AND it identifies...

  On my way to this page, I noticed several very suspicious activity reports,

  as [random character string] as an ID for a Windows update.

  What is going on?

  We deserve a real explanation...

  A person found a weakness in the process of "updating" windows and exploited it?

  Member of the ACM 3622339 since 1990.

  Hello

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  According to the description, I understand the problem installation of updates on the system.

  Certainly, I understand your concern and will try my best to help you.

  There could be a possibility that this issue would have intervened if the updates were not installed correctly on the system.

  I can really imagine the disadvantages suffered by you during the installation of Windows updates. Sometimes it is really frustrating when things do not work correctly with the machine that we are planning and wait. So, we need find the root cause of the problem and I would definitely you help solve the problems in the right direction in order to get this fixed number.

  The question arises if the Windows Update package is not configured properly, or because of incomplete installation. I would say so, you remove any external media connected to the computer and try to crash restart your computer 2 or 3 times and check if you get through this error message.

  In addition to this, I suggest you try the following methods if you are able to boot to the desktop and check if the problem persists.

  Method 1:

  I suggest you run the Windows Update Troubleshooter to check if it works. Please follow the link given below.

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-in/Windows7/open-the-Windows-Update-Troubleshooter

  Note: The troubleshooter above checks if the network card and Windows Update services work properly.

  If the problem persists, follow method 2

  Method 2:

  I suggest you to reset manually the update of Windows components. Please follow the steps outlined in the article below and check if it works.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Now, you can try to run the Windows updates and check if the steps above to solve the problem.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

  Jayant

• So, my cousins both got two netbooks for Christmas so I took it upon myself to put in place. However, I seem to have problems with getting Homegroup to work.

  original title: incorrect Homegroup password

  So, my cousins both got two netbooks for Christmas so I took it upon myself to put in place. However, I seem to have problems with getting Homegroup to work.

  All computers:
  Have enabled IPv6
  Use Microsoft Security Essentials with the last update
  Are connected to the same router (Linksys WRT54GX2)
  Have no other third-party firewalls or AV installed and have been neatly eliminated via their respective tools when they had their
  Can be seen in the network and can access any other files via 'network '.
  Have the correct date and time and are all in sync with time.nist.gov.
  Have the same network sharing settings (network discovery on, files and printers sharing folders public, sharing, streaming, wide, 128-bit encryption, sharing password protected, to allow windows to manage the homegroup connections)
  Network is set at home, not in public

  The computer that has implemented the homegroup is connected via ethernet to the router while other computers use to access the router 802.11 g I tried to delete and redo the residential group as well.

  Despite all this, it is said that the homegroup password is incorrect for both netbooks (where it says it has encountered an error). I realize that it is case sensitive and I entered the password correctly. I also ran the resolution of the problems of the homegroup on all 3 machines and still no luck. I also tried to change the password and restarting of machines.

  Any suggestions? I was _really_ hoping it will work right out of the box. Maybe it's something with the router? I don't really know. Any help is appreciated. Merry Christmas! : D

  Hello

  check out this link.

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-create-a-HomeGroup

  http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup

• 4.0.3.16.84 - x 64 - hangs with "Waiting for Editor initialize."

  Hello

  Just downloaded latest sqldeveloper with included JDK and works in this question every time I open.

  4.0.3.16.84 - x 64 - hangs with "Waiting for Editor initialize."

  Not sure it's bug or something is altered in the preferences directory.

  I've downloaded again and again open directory, still getting the same error.

  Does anyone have a work around?

  Thank you

  Ken

  Hi Ken,

  If you think that the migration of user settings was wrong somehow, try to rename or delete these files (or use the -Dide.user.dir thing noted below), then restart without a migration of user settings...

  %AppData%\SQL Developer\system4.0.3.16.84

  %AppData%\sqldeveloper

  My standard advice on this kind of thing...

  1 see if behavior persists after the removal of the settings and restart SQL Developer without migrating settings.

  2. see if (assuming that (1) does not help) allows to reinstall SQL Developer.

  If the fault cannot be placed on a migration of settings / download / installation corrupt, then we can start to consider...

  3. possible problΦmes with older JDK.

  4 OutOfMemory possible problΦmes that may be hidden by running only no Developer SQL from a command line console.

  5. a new bug.

  So try (1) and (2) If you have not already.  Ignore (3) because you have the provided JDK.  Point (4) can be a problem if you have many windows to restore and did not mount the Xmx values in the file product.conf - especially if you use a 64 bit JDK.  And (5), if you have the urge, see...

  http://www.thatjeffsmith.com/archive/2012/06/how-to-collect-Debug-Info-for-Oracle-SQL-Developer/

  And if you want to try (1) in a clean 'sandbox' unaffected by existing directories of user settings, you can always add one

  AddVMOption - Dide.user.dir =

  line to your sqldeveloper.conf file.

  Kind regards

  Gary

  SQL development team

• Mobile Lightroom. Stuck with "Waiting for Connection".

  Mobile of Lightroom cannot synchronize because "waiting for connection" status. Was working fine before. Also cannot synchronize with LR Mobile in the Collections switches - they used to work very well.  What's Adobe up? Need a fix.

  Problem fixed (maybe).  I disconnected LR-Mobile on iPad, then logged on. Initially, it looked like LR - M in lost iPad. Then I closed the application and reopened. All the images previously synchronized and collections are back. Then I opened LR on my iMac and to my surprise, the "waiting for connection" had disappeared. It was replaced by "sync 22 photos. Of course, all seems good now. Don't know if this will work for everyone, but fingers crossed it stays fixed.

• Error with Conversion Util Web Page: "not able to access installation of Acrobat Capture Web. Acrobat may be busy or waiting for input. »

  Hello

  I get the following error message when you use the Page convert to PDF module in Internet Explorer: "not able to access installation of Acrobat Capture Web. Acrobat may be busy or waiting for input. ».

  I use Acrobat X (with latest updates) on Windows 8.1, 64-bit and IE 11 (both with all latest updates).

  When I click on the button to convert the top of IE, I'm asked to select the file location and name.  When I click on save, I'm presented with this error.  The utility creates a file, but it is unreadable - opening it gives an error in Acrobat, saying that the file is not a supported file type and it was damaged.

  I have seen this error in the forum and took the advice given to run the repair via Add/Remove programs.  I have run the repair and restarted twice, but to no avail.

  I also uninstalled, rebooted and reinstalled, but again, no luck.

  Please let me know what to try next.

  Thank you

  -Jody

  Hi Jody,.

  Please post on the Adobe forums.

  Internet Explorer (and even other browsers) sometimes finiky when used with a program in administrator mode.

  So, please right click on the Acrobat icon and choose ' properties > Compatibility tab "and uncheck the"Run this program as an administrator"option.

  Let me know if this helps.

  Kind regards

  Ana Maria

• While trying to see Planner installation and operation, the test in local mode, the EXECUTION fails with message "Waiting for the number of virtual machines to register.

  While trying to see installation and operation Planner, the test in local mode with only 1 VM the EXECUTION fails with message "Waiting for the number of virtual machines to register.

  There may be a lot of problems in the desktop VM. Agent service see Planner is not running in VM Office. You can check in the event viewer to see what kind of error occurs. The most usual error missing file IP.txt c; drive or harness IP in the IP.txt produce if there is.

• Wait for the event begins with SQL * Net message from client-time wait 178577 units

  Hello
  
  I'm watching events waiting for a request from long time in TOAD.
  I start the query on an instance of TOAD, and open the browser to log on to another instance.
  But I am surprised to see that in "TOtal expected" on the RIGHT part->
  SQL * Net message from client is the longest time and is already - > 178577 units while I just to start the query.
  
  Considering that, in the current waiting she shows DB file scattered read correctly for a few seconds.
  
  Please suggest.

  user8941550 wrote:
  Hello. No explanation for this... :-(

  Hello

  people work here, you don't know?
  I think Tom Kyte explains it well enough. This wait event is linked to your session database waiting for the guest to say to do something.

  So it is not related to the database, but to your application.
  Also as it is a wait of session event you might have had your session inactive for some time (do nothing)

  If you want to check the waiting events correctly I suggest using tkprof and start a new session in SQL more as shown by Tom Kyte in the link I posted.

  Then, run your query in sqlplus setting track and pull it out as soon as your statement is completed.
  that is to say:

  -- myest.sql
  alter session set events '10046 trace name context forever, level 12';
  SELECT ... -- your query here
  exit
  

  Run in sqlplus in this way:

  sqlplus user/password@db @mytest.sql
  

  Then check with tkprof.

  Kind regards.
  Al