How to restore windows firewall, vista home edition, IE - 9, HP
How can I download for vista home edition, IE 9 windows firewall
Hello
You say you have a problem with your firewall, not with the Defender
We need to know what Antivirus you have installed.
If it is an Internet Security Suite, it will usually its own firewall.
And it allows to disable the default Windows Firewall.
The Windows Vista firewall is part of the Vista operating system and is not available for download.
This can help you, too.
"How to turn on the firewall enabled or disabled in Vista Windows '
http://www.Vistax64.com/tutorials/92697-Windows-Firewall-off.html
"How to disable or enable Vista Services"
http://www.Vistax64.com/tutorials/59910-services.html
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
And malware can interfere with Windows security features, including the firewall.
Scan of Malware in Safe Mode with network.
http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
Once in Safe Mode with network, download and run RKill.
RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.
http://www.bleepingcomputer.com/download/rkill/
Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:
http://www.Malwarebytes.org/products/malwarebytes_free
See you soon.
Tags: Windows
Similar Questions
-
How to restore Windows Firewall rules to the default settings
* Original title: Win7 firewall rules have disappeared AND the HKLM\System\CurrentControlSet\services\SharedAccess\Defaults also went
How do you get these restored once a virus (or what did it) delete them? He has not only deleted the incoming power and outgoing traffic rules, he removed the DEFAULT values is that all the default settings of the Control Panel-Windows Firewall-restoration netsh uses to perform a restore from a known set of the default initial settings. If none of these options work, and I don't have another machine to get something to copy. This may not be so rare lately, like virus get more aggravating at the time. All viruses that wants to do a thorough job of * you off clearly would remove the default values as well as the current rules precisely to do evil to restore. There must be a way to get a standard set of default values for initial return, either: - a low-level - canonical list of repair operation - fixit utility - Microsoft has to right Win7?
Hello
I suggest you to upgrade in Place on Windows 7 and check.
How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
http://support.Microsoft.com/kb/2255099Important note: I would like to explain that the upgrade in place is a tool to repair the system. Thanks to the special upgrade process, we will be able to repair the system. The upgrade in place will not affect the settings like photos, movies, documents, etc. that are saved on the computer. However, it is recommended that you first back up your important information and files of other partitions or other disks.
For more information, see the link.
Reset the default settings in the Windows Firewall with advanced security
Please post back with the results and we will be happy to help you further.
-
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Hello
Welcome to the community of Windows Vista answers.
First of all, we will try if we can start in safe mode.
Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.
Steps to start your computer in safe mode with networking
1. to start mode safe mode with networking, restart the computer and press the F8 key for about four to five times. You will see "Safe Mode with network" listed in the advanced options of Windows.2. Select "Safe Mode with network" and then press ENTER.
Access the link below for more information on how to start in "Safe Mode with Networking":
http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspxThe system restore.
http://support.Microsoft.com/kb/936212Method 1:
The restore of the system of Windows Recovery Environment (WinRE)(a) Insert Vista DVD and boot from the DVD.
(b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.
(c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.
(d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box
(e) select the Vista installation you want to repair.
(f) in the system recovery options, click on system restore to restore the system.
Method 2:
Run the disk check Windows recovery environment to correct the bad sector on your hard drive
(a) Insert Vista DVD and boot from the DVD.
(b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.
(c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.
(d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box
(e) select the Vista installation you want to repair
(f) in the system recovery options, select command line and enter the command chkdsk/r.
For the above two steps, you can see the link below.
http://windowshelp.Microsoft.com/Windows/en-us/help/95b4c03a-ac42-49a4-a90d-8f3736a995271033.mspxOnce you perform the restoration of the system, download the updates and install them manually one by one, this should help you knowing what update causes this problem.
Concerning
Amrihta. -
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas: 2 Questions actually & I have Windows Vista Home Edition...:
(1) I begun to change some permissions under the Security tab of the properties, and now they are screwed... How can I reset just all permissions to the default settings? Help, please! Boy, I'm arrested for murder... My laptop about to be thrown through the window of a building-sky.
(2) is there a way to reset or restore my system? I don't like to lose anything it all. I saved what I want or need. I just want to start from scratch...
In fact, I have 1 other question... Whole reason I messed my permissions first is because I've had this laptop second hand and I did EVERYTHING to get rid of the old owners as a user name and I IMPOSSIBLE... It drives me crazy. I am the owner / administrator and there is no other user accounts, but still all my programs and files have this other names of people on them.
* Thank you very much to all those who can help me!
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
You must always wipe a used computer and start over.
How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.
They will tell you how to do this.
Every computer manufacturer has their own way of making recovery disk/s.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
Save all data, because it will be lost during a clean installation.
See you soon.
Mick Murphy - Microsoft partner
-
Can I get a restore CD from HP for my Windows Vista Home Edition?
My hard drive crashed. It is in a Compaq Presario SR2150NX PC running Windows Vista Home Edition,
that was pre-installed. I do not have the installation diskettes; but I do not have the sticker
always on the side of the computer that has the product key. The player does not even start.
It is quite dead. If I buy a new hard drive and install in the machine, will I be able
to get a disk of software to replace Microsoft or HP for Vista Home operation
No fees + port, of course, since it is a genuine copy of Vista system? I still have
have purchase receipts original for computer, indicating the serial number, etc..
Sorry, I'm not computer savvy and don't know how everything works. I would of course
Appreciate any help in recovering my Vista. The error I get on my screen that says: "Reboot and".
Select proper boot device or Insert Boot Media in selected boot device and press a key"Frank post replacing > you can order a disk recovery for $27 the value of ComputerSurgeons.com .
-
- I can't share internet and file simultaneously? If I share internet file sharing and disappear on the other PC if I share folder and run I can't share internet...
- 2. I have Windows Vista Home edition is possible with Windows XP prof sp2 Remote Desktop connection?
- othervise how?
Remote Desktop connection is not available in Vista Home: http://www.howtogeek.com/howto/windows-vista/turn-on-remote-desktop-in-windows-vista/.
I need more info on how your network is configured to answer the question on the other. How is the computer connected to the internet? It connects wireless or cable to the router or modem or through ICS from another computer or what? How do you change between the sharing of internet connection currently? What happens when you try to enable both connections at the same time (or do not have two connections)?
Thank you. The answers above, I can be able to understand the problem, because right now I really don't know how you setup and I need as much information as you can provide about it.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I use a Windows Vista Home Edition on a laptop. The system connects to the Internet through a cellular router EDGE (via Ethernet) and receives the data by linking receiver DVB - S2 satellite broadband connected via a USB interface. The connection is through a VPN. Windows Vista loses the symbol of the "blue planet", as soon as the VPN connects. Authentication and connectivity is OK. DNS also works OK by the way VPN, with pointing to the VPN IP address 0.0.0.0. The diagnosis indicates an error where Vista says that she finds multiple active dial connections. Y at - it a configuration option that allows me to bind the interface transmission (VPN) with return channel satellite? The same software and configuration under Windows XP SP3 works OK.
Thanks in advance for your advice.
Hello
Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/category/w7itproYou can also check the links below for assistance.
http://TechNet.Microsoft.com/en-us/library/cc728078 (WS.10) .aspx
http://TechNet.Microsoft.com/en-us/library/cc737767 (WS.10) .aspx
Hope that helps.
-
Original title: Netbook Licensing
Can someone give me an answer to confirm if netbooks with Windows XP Home, Vista Home Edition, Windows 7 starter (these BONES other than professional or company) be used in a business, connected to the server environment to share files?
I read somewhere that these permits cannot connect to a domain, is this true?
Of coz these OS has not input parameters are even to join a domain, how can they connect?
CAN, that my understanding of that statement means that it cannot be connected to a domain server, means that the netbook cannot be connected to the server to access files shared server?
Can the netbook share files with other computers (vice versa), other than a domain server, on a network of companies?
So what my final question is a netbook can exist in an enterprise environment? What's a standalone machine?
I'm not able to get an answer very Microsoft Singapore confirm after the call to them.
Hello
Computers running Windows 7 Starter Edition cannot connect to a domain.
Reference: Networking in Windows 7 Starter
-
Why am I not able to download any of the service packs for windows vista home edition
Why am I not able to download any of the service packs for windows vista home edition
Windows Vista and Windows Server 2008 service Pack is not available for installation via Windows Update
http://support.Microsoft.com/kb/948343How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
http://support.Microsoft.com/kb/947366Learn how to install Windows Vista Service Pack 1 (SP1)
http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspxLearn how to install Windows Vista Service Pack 2 (SP2)
http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx -
How to restore Windows Vista to how it was this morning?
original title: how to restore windows
Hello
I installed windows vista ultimate on my desktop xps1 and and want to go back to the way the system was this morning and the needs of hep to how.
Note: The system was purchased with Home pemium then I upgraded to ultimate using a cd in 2009. but some problems recently and I was asked to upgrade or re - install the windows that I tried this morning but many of my programs installed is not there so I want to do back and then try upgrading insteead of custom installation, I did.
all he said it back to step I got it this morning
Hello Jack 76.
"I asked me to upgrade or re - install windows.
There is a big difference between an upgrade and a reinstall.
"How to restore a computer to a previous Windows installation after you install Windows Vista"
http://support.Microsoft.com/kb/933168
As you say that you did a Custom Installation, see if you have a windows.old folder that is available and the formalities required for use according to the instructions above on how to 'dismantling' to an earlier version of the operating system.
If you do not have the above, there is nothing that can be done about it.
-
Printer Spooler service removed from Windows Vista Home Edition
I have Windows Vista Home Edition and I don't know when, but in some sort my printer spooler service has been removed, whenever I try to install my printer it gives an error message that there is no printer spooler service, please help I did not one backup drive that I have to buy windows vista home edition to return to my printer spooler service?
Hello
1. What is the error message or an exact error code?
2. what security software do you use?
3. have you made any change before this problem?
4. What is the serial number and model of the printer?
5. you have all other printers installed on your computer?
6. How do you install the printer?
7. do you have a software CD to install the printer?
8. in the printer works well before?
Try the following and see if that helps you.
Method 1:
Use the services console to check the status of the print spooler service and make sure that it is started and set to automatic
Try this link to check the status of the print spooler service:
Method 2:
Disable the security software and check if that helps you.
Disable Vista security software:
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Method 3:
Try to add a printer and check if that helps you.
Add or remove printers in Vista:
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer
Method 4:
Try this link to solve printer problems in Windows:
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
I hope that helps!
-
Windows Vista Home Edition not accessible PC in network
Hello
I have Windows Vista Home edition installed on a PC. I shared a few folders on the network. I gave all security and permission to everyone to read and share share the contents of the folder.
But when someone from the network wishes to access a shared folder on this computer by writing (\\abc-PC) in the Run dialog box, system gives an error "network path was not found".
I disabled the firewall and anti-virus to this PC.
Network is configured by a network of professionals expert. So no question of network.
Some people said that this is a limitation of Vista Home, but I do not.
Please help me.
Thanks in advance.
Thanks Krish
Hi Krish,
Work on a domain network?
Make sure that the computer is turned on and that you have enabled file sharing and printers on your network
Follow the steps mentioned in the link below
Solve the problems - and printer-sharing files
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing
Make sure network discovery is on
1. open the network and sharing Center by clicking the Start button, clicking Control Panel, clicking Network and Internet, and then click Network and sharing Center.
2. If network discovery is off, click the arrow to expand the section, click turn on network discovery, and then click on apply. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
For more information, see the link below
Network connection problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
Networking of computers running different versions of Windows
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I have windows vista business edition is installed on the desktop and Vista home edition on my laptop I can't access files on the laptop and vice versa, I am using a d-link adsl router can u help me solve problems
Thank you
PeterHello
The easiest way is with a crossover cable - a special wire to connect the two systems.
You can get one at your local computer store - they are not expensive.Also check with the site of the manufacturer of your router, because they will have in-depth details on how to
set up the network.====================================
Or you can set up a wired or wireless network.
Setting up a network home
http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-networkHome network, wireless network and computer networking Made Easy
http://www.home-network-help.com/Windows Vista tip: How to install and connect to a wireless network
http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.htmlAd-hoc networking
http://windowshelp.Microsoft.com/Windows/en-us/help/0e158c21-4C70-4235-879d-0c9133218e561033.mspx
Set up a computer-to-computer (ad hoc) network
http://windowshelp.Microsoft.com/Windows/en-us/help/293c504f-b944-4d5d-835c-f080129bd5dc1033.mspxHow to set up an Ad Hoc wireless network in Windows Vista
http://www.home-network-help.com/ad-hoc-wireless.htmlCreate an ad hoc WiFi network secure on Windows Vista
http://www.Intel.com/support/wireless/WLAN/sb/CS-025386.htmNetworking tutorial home
http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
Practically networked - everything you could possibly want to know.
http://www.practicallynetworked.com/I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Hello
I tried to download and install Service Pack 2 using Windows Vista Home Edition, or anything like that on the internet without success. According to me, the key word is internet or a block of Vista from the internet to install anything. Many people here get the same error 80070005 for SP2 as I am, but I think that the problem is with Vista, how the system allows any installs or blocks installed from the internet. I suppose that some are able to go through the download process, but installation is where it does not pass through. There are moments where it seems that the installation of SP2 works, but it will fail eventually. Other times what ever happens to the installation process. The same goes for all other downloads and installs from the internet. I am able to install a program that already exists on the computer, so I know that installs works just not the Internet. Do not send me a link to install because it probably won't last through. I may be able to download but installation will not pass by so that the program will not work. I used the words installation and internet a lot for some reason please take account, when responding.
Thank you
https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1
Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.
Microsoft free support for Vista SP2 at the link above.
See you soon.
Mick Murphy - Microsoft partner
-
I have vista home edition and have lost internet how do I get it back?
I hava a HP that is 6 years old. I tried to remove google crome as my internet option and use internet exlporer. Now, I can not all internet options? I have Vista home edition.
Help!
Internet explore for Vista is not safe and should not be used. Google Chrome or FireFox is much safer. The method used to remove chrome, it would be possible to recover. Examines settings system restore back to a date before that Chrome has been removed.
Maybe you are looking for
-
How can I change the email associated with my account of Firefox on my computer?
In the right corner where my drop-down list is - it's showing an old email address that I am about to cancel. I have a new email address I'd like to enter but I can't seem to find the right place to enter. I found the place to change the password, bu
-
What is the cover/housing or the coating of the ThinkPad T540p?
Hi all I wonder where is the cover/box of the Thinkpad t540p? Is there any coating? I can't find this information on the Web site. I ask this question because I have a chemical sensitivity Multiple and plastic gives me problems. Thanks in advance!
-
Automatic updates will not download to Windows XP SP3 or Microsoft Security Essentials.
I had the Choicepoint Virus a few weeks there and I think you, I took it. I reinstalled SP3 and got IE8 running. Taken from old CA antivirus program. used to get rid of all traces of Norton or Symantec removal tools. MSE installed and everything work
-
The touchpad on my HPG60 moves is not the cursor around
Original title: my cursor is stuck. I have a laptop HP G60 running Vista. My cursor is stuck. He can't move with the touch of the finger or the arrows. Cap lock is off. It started on my Vista so I reinstalled the original backup files from CD to work
-
How can I type exhibitors?
How can I type exponents, like a 2 X in a square?