How to run a 'test' clean sheet & heads

Similar Questions

• How to run a test from Unix script

  Hello
  
  Can someone guide me how to run a test case of (created in SQL Developer) unit from unix.
  
  Thank you
  Lifexisxnotxsoxbeautiful

  You should be able to run your tests using the command line interface:

  http://docs.Oracle.com/CD/E25259_01/AppDev.31/e24285/unit_testing.htm#BCGFBIDD

• 7520 photosmart all in one. How to disable auto clean print head

  I have the HP Photosmart 7520 and I am running Windows 7. How can I disable auto cleaning feature print head?

  Using function Thi my ink so that I am not the same impression.

  Hello

  To answer your question, unfortunately you can not disable this function where the print head will not clean itself. The printer is made to do to keep the printhead to collect ink on the inside contacts.

  I hope that answers your questions.

• Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

  Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

  Suggest you read the following: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/virus-recovery-error-codes-0x80070424-and/28ed2ede-076c-4955-bb49-44d0c2ee1ed3

  I hope this helps...

• How to clean the head on DeskJet 1000

  Hello!

  I have a DeskJet 1000 printer. Sometimes I have vertical lines on the printed image (dirty head) but I can't find the head cleaning tool. How can I clean the head on this printer? I found nothing in the menus.

  I use Windows XP Professional.

  Thank you. I found the problem. carrtidge not loaded correctly.

• Windows 7 + HP Deskjet 1460 - how to clean cartridge heads before use?

  Use refillable cartridges and instructions are to clean the heads of the cartridge before use. Despite the reference the printer user's manual, am unable to locate thiis ease.  AM getting printing missing lines, so obviously cleaning is necessary it is no "toolbox" anywhere on the tabs of the printer.  Help!

  Go to the HP website, select Support and drivers, enter your printer model number.  You can find drivers and software for your printer, but also specific advice on how to proceed to daily use and maintenance on her tasks.

• I want to re install with a clean sheet. I have install, but my old catalog loads again. How do I delete catalog and where it is stored. I lost some of the media that came with my drive by accident so I need to re install

  I want to re install with a clean sheet. I have install, but my old catalog loads again. How do I delete catalog and where it is stored. I lost some of the media that came with my drive by accident so I need to re install

  HI ATR

  Just update you 13 windows 7 items... I sat until midnight and found the program data and ended up finding the catalog. I deleted the catalog now. and uninstalled items 13. I hope that when I reinstall it will be like new, and I can go back again. I had messed up I saw when viewing the photos in the media, it was media files and thought they shouldn't be there so I deleted them. Maybe thinking about now I get an error. Before, I made a slideshow with the media from the drive. I just started using elements 13 I used windows live previously for videos. Can you let me know also what photoshop elements or first, you use the most.  Also if I import video files in why do I see them I think of thumbnails. That's where I went wrong and thinking, they shouldn't be here. I brought a few books and trying to go through the learning process. What camera do you use?  Many questions sorry. Thanks for any help.  Russell

• How can I uninstall pc cleaner from my computer?

  When I try to uninstall it, a window appears and cannot delete, block the complete uninstall

  Hello

  "' Have one of these:

  PC Cleaner and PC Cleaner Pro are malicious software and must be eliminated.

  How to remove PC Cleaner<- check="" the="" removal="" methods="" here="" however="" be="" aware="">
  malicious software can turn so it's maybe not accurate.
  http://www.ehow.com/how_5003975_remove-PC-cleaner.html

  PCclean - also check the methods of hair removal here
  http://www.Symantec.com/security_response/writeup.jsp?docid=2008-032714-2234-99&tabid=2

  --------------------------------------------------------------------------------------------------------------------------

  This tool troubleshooting for Windows 7 - Vista is very similar - use XP RUN instead of start.
  Search

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others

  
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
  MALWARE IS STILL PRESENT).

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 for virus and spyware help
  infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
  international information, see your subsidiary local Support site.

  Microsoft support - Virus and Security Solution Center
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How to disable the test mode on Windows 7?

  Hello

  I read an article on how to get rid of the test mode on windows 7 and the suggestion was to download fixit from windows.  My problem is that the slider runs constantly and I can't click on anything to start the download.  Any suggestions?

  Hi Mona,.

   
  Thank you for visiting Microsoft Community.
   
  I understand that you have found a water test mode on the Windows 7 computer brand.
   
  Test mode is a mode that aims to install drivers that are not tested.
   
  For several build of windows 7, that this mode and disable this, you can follow the article below:
   
  http://support.Microsoft.com/kb/2509241
   
  To fix the rotating cursor around constantly please follow the suggestions below:
   
  This problem may be caused for the following reasons:
   
  Third-party applications.
   
  Temp folder is full.
   
  1. What is the number of brand and model of the computer?
   
  2 have you recently made any changes to the computer?
   
  To resolve this problem follow the methods below:
   
  Method 1: Clean boot
   
  Put your system to the clean boot state helps determine if
  any third-party applications or startup items are causing the problem. You
  need to follow the steps in the article mentioned below to perform a cleanup
  Boith
   
  How to perform a clean boot in Windows
   
  http://support.Microsoft.com/kb/929135
   
  Note: After troubleshooting, see the section "how to reset the computer to start.
  "normally after a boot minimum troubleshooting.
   
  Use this procedure to disable all the third-party application and Microsoft services will be activated.
   
  Method 2: Disk clean
   
  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7
   
  Following this article, you can delete the temporary files that is on the computer.
   

  Additional information:

  How to disable the "Test mode" message that is displayed in Windows

  http://support.Microsoft.com/kb/2509241

  Hope this information helps. For all other windows-related assistance,

  Do not hesitate to contact us and we will be happy to help you.

• How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  Pure how to install OSX on a Fusion drive and keep the recovery disc function

  These instructions assume that your iMAC partitions or file systems has been damaged and you want to restore to the way most efficiency with fusion drive and the recovery partition, similar to what was built in the factory.

  These instructions work for the iMAC, retina 5K end 2014 version comes with OSX Yosemite. The scores of major drive of the 128 G SSD and 3 TB of HARD drive has been configured as a logical drive (merger by car).

  WARNING: These instructions here are shared for interest only. Readers to take their own risk by following these instructions. The author is not responsible for any damage caused by following these instructions.

  This is the target disk partitions, and the configuration that we want to achieve.

  Disk0 is the 128 GB SSD - solid state drive and holds the start of the partition (disk0s3)

  Disk1 is the 3.0 to HDD - mechanical transmission and holds the Recovery HD partition.

  There are two EFI partitions to partition table GUID on both hard drives (disk0s1, disk1s1).

  Disk space remaining (partition disk0s2 and disk1s2) are used to create the disc of Fusion 3.1 to named "Macintosh HD".

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB LVG 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: disk1s2 Apple_CoreStorage TB 3.0 LVG

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk2

  Logical volume on disk0s2, disk1s2

  0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  Fusion unencrypted drive

  Here's how we do it.

  • A. clean reinstallation of Mac OS x.
  • 1. make sure that you back up all your data on the hard drive using Time Machine or other means. The following procedure will delete all data.
  • 2. create the OSX install USB, insert it to the MAC workstation.
  • 3. given that us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 4. in the menu at the top of the screen, select disk utilities.
  • 5. turn highlighted the volume of disk Fusion called "Macintosh HD." Click clear to clean.
  • 6. If his success, then go ahead to install OSX new to that partition, as usual.
  • 7. otherwise, if it does not, that means fusion drive has been damaged.
  • 8 follow the instructions below to fix it.
  • . B. Split disc Fusion in the physical hard disks
  • 1. Since us will be operated on the internal drive of the Mac trunk, assumes that we already have boot up OSX install USB drive (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3. on the screen of the terminal type:
  • Cs diskutil list.
  • You will see something similar to the screen below.
  • 4 copy the long string after Logical Volume and replace the UUID with it in the following command to delete the logical volume of the disc fusion (aka coreStorage of logical volume):
  • diskutil deletevolume cs UUID
  • For example:
  • diskutil deletevolume E59B5A99-F8C1-461A-AE54-6EC11B095161 cs
  • 5 copy the long string after the logical volume group and replace the UUID with it in the following command to remove the drive (aka coreStorage) fusion:
  • diskutil cs remove UUID
  • p. ex. diskutil cs remove E03B3F30-6A1B-4DCD-9E14-5E927BC3F5DC
  • 6. at this stage, the fusion drive has been deleted, and hardsisk SSD and mechanical hard drive will be reappear in diskutil or separate records.
  • 7. If step 5 or 6 takes more than 30 minutes to complete, this means that the fusion drive has been corrupted. You can follow the commands below to clear the table to partition the hard way. First command clears the SSD drive, second command erases the HARD drive.
  • The command does not return a response, after 1 minute, press Ctrl + Z to complete orders. 1 minute is enough data to code and erase the partition table on the disk.
  • cat/etc/random >/dev/disk0
  • cat/etc/random >/dev/disk1
  • . C install a new copy of Mac OS x for the hard drive HDD and tested this disk partition hard recovery work.
  • 1. go on diskutil to create a partition called Macintosh HD HDD hard drive using all the space there.
  • 2 do the same with the mechanical hard drive.
  • 3. follow the usual procedure to boot from the installation of OSX USB and install a new copy of Mac OS x hard disk SSD.
  • 4. This will create the correct priming of the partitions, recovery hard drive partitions and PSX partitions hard disk HDD.
  • 5. once the installation is complete, test if OSX may start successfully, but no need to go through the initial MAC OS x didn't put in place that we're going to waste this and do the installation again later.
  • 6. we must now test if the recovery hard drive partition works.
  • 7. reboot for hard drive recovery (see X - by pressing command and R at the same time during boot right after that you hear sound start and release only a few seconds after you see the apple logo and the progress bar for loading...)
  • 8. it is important to test and make sure that the partition of hard drive recovery.
  • D. recreate the fusion drive
  • 1 since us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3
  . on the screen of the terminal type:
• diskutil list.
• You should find that we have a list of disk group hard physical volume only, no logic here still.
• 4. you will see something similar to the screen below.
• 5. search for the largest partition on the SSD hard drive, which should be close to the maximum size of HDD to the SSD (121 G, for example) and mark the name of the device, this will usually be something like/dev/disk0s2
• 6. search the largest disk partition mechanical forming fusion with the SSD hard drive. This should be close to the maximum size of the mechanical hard drive (for example 3 TB) hard disk and mark the name of the device, this will usually be something like/dev/disk1s2
• 7
. Now let's create the merger in car (group alias logical volume) in the Terminal, type: diskutil cs create nom_lecteur driveIDs
• The number of the driveIDs is unlimited, it may be a number of discs, or a number of disk partitions. Always put the faster discs first, for example for our SSD disk0s2
• For example:
• diskutil cs create fusiondrive disk0s2 disk1s2
• diskutil - the version of disk utility command line.
  cs - This calls for Core Storage, which is necessary for the merger.
  create - creates a basic storage group.
  nom_lecteur - is the name of the drive and how you want that he
• appear in the disk utility (not the Finder - that comes later). You can call it what you like; in our example, we named our Fusion table "Fusion".

driveIDs - Here is the Player IDs of the readers you want as part of your Fusion table, separated by a space. In our example, they are 'disk0' and 'disk1', but it may be different in your configuration.
• It is important that the faster hard drive appears first in the command, which in our case the disk0s2 (a partition in the SSD). In this way, drive fusion will use this disk as primary and the cache. The second disc in the command, in this case disk1s2 (a partition on the HARD disk). The secondary disk (HARD drive) is used to store less frequently used files.  Otherwise, the fusion drive performance will be worse that it is designed for.
• 8. you will see something like below appear on the screen:
• Creation Volume logical storage of kernel
• Move isk0s2 storage of carrots
• Disk1s2 of switching for the storage of carrots
• Waiting for logical volume group appear
• Discovered the new group of logical volumes 'DBFEB690-107B-4EA6-905B-2971D10F5B53 '.
• Store LVG UUID: DBFEB690-107B-4EA6-905B-2971D10F5B53
• Finished CoreStorage operation
• 9 copy to the bottom of the string after "Discovering new Volume Logic Group" using the command + C
• 10. next, create the partition of the merger (alias logical volume) drive named "Macintosh HD".
• In the Terminal, type: diskutil createVolume groupString jhfs cs + size volumeName
• For example:
• Diskutil createVolume DBFEB690-107B-4EA6-905B-2971D10F5B53 jhfs cs + 'Macintosh HD' 100%
• diskutil - once again, this is the version of disk utility command line.
• cs - called the basic storage functions, which are necessary for this arrangement.
• createVolume - this is the command to create the storage area real for the reader who is represented by an icon on your desktop.
• groupstring - this is the long alphanumeric string you copied in the previous step. It identifies the table you created such as getting a volume placed on it.
• jhfs + -the format of the disc. It is Apple (journaled) extended Format, which is recommended for drives with an operating system installed on it.
• VolumeName - the actual name of the volume, how it should appear under the icon. If there is a space in the name, you must put the full name in quotes ("name") or put a slash before the (name Drive\) space. In our example, we made these, naming our volume "Macintosh HD".
• size : this is the size of the volume. In our example, we had a 1.1 TB drive. We used '1100g' to describe what 1100 GB (1.1 TB to base 10). Otherwise, we could have also used 1.1 T or even 100% as a size.
• 11. go to diskutil to verify that you can see this new partition on the list.
• 12. test by erasing all the data from it.
• 13. then you can go ahead to start on the USB drive to install OSX and install a new copy of Mac OS x on it.
• 14. This will allow you to keep the recovery disk feature.
• X. how Prime to recover partition
• Press and hold the command and button R set immediately after hearing the bells to boot.
• Only release it 2 seconds after you see the Apple logo on the screen and the progress bar for the start. This will start the partition of hard drive recovery.
• Y. how-to boot OSX install USB
• Press and hold the command and the optionkey together immediately after hearing the ringing of boot.
• Only release it 2 seconds after you see the Apple logo on the screen and it will give you a list of startup disk choice, choose the OSX install USB to boot from.

• Office Jet 6000: cannot find how to print the test page with Office jet 6000

  I can't find in the properties of this printer HOW to print a test page. I was running out of ink black, and all color cartridges are rather recent and not on show at low levels. But, after replacing the black cartridge the first doc to test printed came out very uneven and unreadable.  There is no error message.  How in diagnostics on this printer to test the printing?  I tried not to print a doc of color (as photo) yet.

  Can I update the driver?  Help, please.

  Hello

  Test print page options under properties of the print driver for your device.

  But I don't think that solv your problem.

  You must print alignment and another test for correct print quality problems.

  Here is the HP site, gives detailed instructions form document.

  http://support.HP.com/us-en/product/HP-OfficeJet-6000-Printer-series---E6/3866939/model/3866950/document/c01708575/

  Good impression

• B210e Inksystem failure, Tower works to solve after cleaning the heads. Does not help

  Currently usinga B210e printer, had a paper jam and removed the jam.  Now I have an error message saying: ink system failure

  Complete guide to troubleshooting by HP, clean same head, back and have always system failure message ink at the same time to activate and deactivate the message that has no effect after hours of frustration.  Have carefully inspected printer and cleaned the printer head prepares and then says turn of and on.  Removed wall taken elctrical and still nothing.  Will you please help if you can because I'm about to throw the printer in an eighteen wheels.

  Thank you

  Bill

  [Personal information]

  Hi Wilcodd,

  I understand that your printer has an alphanumeric error message.  An alphanumeric error message means that your printer has a hardware problem.  If the steps in the document below are not able to resolve your problem, then you need to think to replace your printer.

  Alphanumeric error

  Let me know how it goes.

• How to run XsdObjectGen in Visual Studio 2010?

  I have some classes that were generated with XsdObjectGen in Visual Studio 2005. Now, we're heading Visual Studio 2010.

  Does anyone know how to run XsdObjectGen in Visual Studio 2010?

  If Visual Studio 2010 does not support this tool, what is the replacement tool? But the generated XML classes must be the same, because we have other classes and third party requests for reference for the classes and the XML files generated by XsdObjectGen in 2005 VS.

  Thank you very much in advance.

  Hello

  The question you posted would be better suited in the TechNet Forums for problems of Visual studio. I would recommend posting your query in the TechNet Forums.

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio

  Hope this helps

• How to run a dll not found program it keeps generating start dll

  How to run a dll not found program it keeps generating start dll

  * original title - network programs network networking Internet Web site Site Web Web Site URL *.

  Hello

  1. What is the operating system installed on your computer?

  2. what program you're talking about?

  3. What is the exact error message you are getting?

  4. when exactly you get this error message?

  5. don't you make changes to the computer before the show?

  Please provide us with more information on this issue to help you best.

  In the meantime, I suggest you to download and run the latest Microsoft security on your computer Scanner and check if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

• OfficeJet 8500 cyan quit printint quo a ink clean print head does nothing

  Cartage cyan has ink but evem multiple "clean print head" still no cyan

  http://support.Microsoft.com/kb/555375?ppud=4&WA=wsignin1.0

  How to ask a question