B210e Inksystem failure, Tower works to solve after cleaning the heads. Does not help

Similar Questions

• When the Admin sign on the office comes to the top, but after that the computer does not respond when the user tries to do anything. There are actually turns off the computer with the power button.

  Original title: user profile

  My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button.  I ran a virus scan and spyware scan in my user admin profile and he has not found anything.  I don't know what to check.

  Hello rhunter15,

  There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.

  First of all, we run System File Checker to see if you have a corrupt file system.

  • Click Start
  • Click on all programs
  • Click Accessories, and then right-click on the command prompt.
  • Select the Security tab and choose "Run as Administrator"
  • Click on command prompt
  • Type SFC/scannow.

  It will scan and repair any damaged operating system files.

  To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.

  KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
  http://support.Microsoft.com/kb/929135

  Once you have finished the clean boot, check again and see if you get the error of parental control.

  If please post again and let us know if that helped pinpoint the problem or if you still need help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After showing the keyboard does not work protected void paint (Graphics graphics)

  Hello

  I am facing a big problem. Need your help.

  I've implemented TouchEvent and VerticalFieldManager-> screen paint().

  TouchEvent works well. But the paint method is confusing after the virtual keyboard is displayed.

  My code is as follows:

  public MyScreen extends MainScreen {
  
      private VerticalFieldManager vfm = null;
  
      public MyScreen() {         super(MainScreen.NO_VERTICAL_SCROLL);         vfm = new VerticalFieldManager(Manager.USE_ALL_HEIGHT | Manager.USE_ALL_WIDTH){              protected void paint(Graphics graphics) {                   //paint methods              }         };    }
  
       protected boolean touchEvent(TouchEvent event) {         if(!event.isValid()) {        return false;   }         if(//Check touch conditon) {               //Do something               return true;         } else {               return super.touchEvent(event);         }     }}
  

  You can correct code above?

  This method of paint does not work after showing the keyboard.

  Thanks in advance.

  Thanks for your reply. Guy.

  I found my bug. This problem is related new instance in my code.

  If the keyboard does not at the present time, it seems that the screen height is decreased by the height of the virtual keyboard. It must be calculated in your code.

• After that the effect does not work after the upgrade to Yosemite

  Hello

  My After Effects CS6 ill not start in my other user accounts since I updated to Yosemite. I installed the plugin/update which was released and it works in the administrator account, however, not on others. Even when I go in the accounts themselves and install and reboot, I have the same problem. It is a laboratory for students, so I can't delete accounts and start over as they all work on these accounts. How can I solve this problem?

  It may be a permissions problem. This is usually the case with an upgrade with Mac OSX (especially since the work of administrator account). fix the permissions problem that prevents to start Adobe applications:

• Body is fixed regardless of what I do and just Funes dragging. Origin of the head does not work as well.

  Hey!

  In collaboration with Adobe host character Preview 3, made all the tutorials, they are great!

  Head of my character works fine, but the body (arms and torso) are fixed to the bg. I never fired them, they are just firmly stuck.  I've tried everything. removal of all the possible Islands, restart, re import, removal of all layers but a piece of the head and then adding a stick as the body figure... no matter what, the body remains fixed. If I put a player on hand is not distort the body but a piece of the arm... I am at a loss. Any help would be appreciated!

  Another strange aspect is that the head or the neck has no place of origin. I tried to put one in a bunch of times but it does nothing, but head still seem to work perfectly.

  This program so much love. Can't wait to see what he does next!

  -Lechuck11111

  

  In addition to the tip of DaveW, also add a '+' in front of the Mervin top-level group.

• After that the effect does not recognize my AMD Radeon r9 M370X (macbook pro 15), what can I do?

  I just bought my macbook pro 15 inches with the graphics card (AMD Radeon r9 M370X with 2 GB of VRAM) and Adobe CC is not recognizing, WHAT can I DO? Help, please!

  Your screenshot shows that After Effects is thankful your GPU very well. The OpenGL section shows that OpenGL works normally. AMD cards like yours have CUDA, so the CUDA section is empty and the ray-tracing section (which depends on CUDA) shows the same.

  Don't worry CUDA; It is used only for an obsolete feature, the 3D rendering engine traced to the RADIUS. The page that I asked you to read above explains everything in detail.

• Backgammon Internet came with my Windows XP. It has worked well for years, then quit the sound. By clicking on "his power" in the options does not help. Help!

  I tried the "sound on / off" in the game options. The speaker volume is high, but the game has more noise.

  shastaman,
  Here are a few things to try.
  The problems of sound in XP

  You can turn off the game (uninstall) turn it on (restore).  To do this follow the steps below.
  Click Start > Control Panel > Add / Remove Programs > (on the left side of the window) Add/Remove Windows components
  Select accessories and utilities, and then click Details. Select games, and then click Details; then uncheck Internet games and click OK to add/remove Windows components > click Next > click Finish.

  Restart your system and then repeat the steps and put the check mark back next to games on the Internet.  Then test after the reboot.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I just bought a new top of the tower that has windows 7, but the program does not accept the all-in-one HP Officejet J4540. What can I do? It is says I need windows 2000, xp, vista.

  I don't want you download something useless. and I don't really know how to do what needs to be done. Help... Thank you!

  Windows Update has nothing to do with the upgrade of Windows. Or contact the HP support (i.e. get it specific drive Win7 & software updates) or republish your question here: http://social.answers.microsoft.com/Forums/en-US/w7hardware/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• Satellite P850-30W - the fan does not work after returning from the mode "Eve"

  I have a Toshiba Satellite P850 30W with bios 1.90.

  Sometimes the fan does not work at all after back mode standby on windows 7.
  What happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  Normally the fan starts to run when the CPU gets more than 50 degrees celsius and stops less than 50 celisus...

  I tried running Prime95 when this fan-this occurs and the time of the computer got dangerously high (near 100 degrees)! the fan did not start at all
  .. .This error could damage the laptop potentinally...
  to get the fan turns once again I have to restart windows

  anyone experienced this?
  I guess that the fix would be to never use standby... or toshiba needs to fix it with an update of the bios.

  > Sometimes the fan does not work at all after back mode standby on windows 7.
  > What has happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  You said it's happened twice and only sometimes done this means that above all the fans are working well?
  In this case, this would mean that it of difficult to reproduce this problem, but you might be right: maybe a BIOS update would help solve this problem permanently

  I found some discussions on the stand-by mode and fan activity and in most cases, the update of the BIOS was the key.

• After Effects CS4 Sniffer_gpu does not work

  After Effects worked fine a few minutes ago and then the next time that I started it all of a sudden it gave me this message that sniffer_gpu had ceased to function. After that, he said something like "after that effects can't continue: sorry." After Effects have crushed". I have searched all over the internet to see that no one was able to solve my problem! During the time where he worked and when it has started to NOT work, I did not install any weird software or close something - I was just trying to open a project file.

  After that the effects were not working even after I ran a sweep deep treatment on Advanced SystemCare Beta. And I have no idea how access the "product details" of my computer to give more information. Please help me guys! I need an answer as soon as POSSIBLE! I'm a book trailer and I need After Effects work. I have a deadline, I need to meet! >. <

  Restartt the sysrtem of re - initialize the graphics driver. Hibernation has everything just what it says - freeze the current state, including what could be the problem.

  Mylenium

• iPhone 5: objective of the camera does not work after update iOS 10

  Hello everyone.

  I swear to you that I have no idea how do... after a few weeks since the release of iOS 10, yesterday I force myself to be updated - the situation with iOS 9.3.2 became crash and unbearable lag every second. The fact is that I update, I like the system and use it for a few hours. Check the camera this morning, I see that the focus does not work. Now I also see AE / AF Lock, light changes whenever I tap on one side or the other, but not to focus. Not even close or far, nothing to do. I have not tried in the settings to do a full erase, I had no way to restore it since I do not have a backup.

  I tried to clean the lens - already cleaned, I tried to give him a few small nicks and follow the many guides online. I rebooted and everything done. Nothing has changed.

  The last photo was taken last night and has been developed. So I don't think it's a hardware problem and if so, how has it happened? A few hours ago the iPhone is fallen, but tell me if it makes sense. If it's a software problem, what could I do?

  I would avoid the assistance. It is a used iPhone, never jailbroken. I don't have a lot of confidence with the help, in 6 or 7 years he never went - iPhone always bought used and always worked very well.

  PS: I have no way to get into DFU, as iTunes does not see my iPhone. Up to iOS 9 that I had no problem even if I had enough of the device with the cable isn't original, but barely now lets load ("This accessory may not work").

  Hello

  I also have an iPhone 5 and I tested the question and mine is fine, how bad was the fall that you mentioned? Sometimes problems can come and go. Also try to reformulate your device.

  After this answer please.

  Thank you Will

• After that my virus clean my printer does not work I have windows xp and my printer Deskjet F 300 said

  After that a virus clean my printer HP Deskjet F 300 quit working they installed Windows XP from Windows 2000 and I can't make it work help

  "they have installed?  You had somebody "clean" your computer and they have also installed Windows XP (you used to have Windows 2000)?

  The first thing you need to do is to determine if 'they' a legitimate version of Windows XP installed.  Download and run the MGADiag tool.  If the tool does not report that Windows is "genuine", take back it the computer and demand that 'they' install an authentic version, paid Windows XP.  While they are at it, tell them to install a driver for your HP Deskjet F300.

  If you do not have a genuine version of Windows XP, then go to this page: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=1128298
  You have several choices to this page.

  • The top line, which only says: 'Pilot' is the complete set of software including software HP's Photosmart printer drivers and the scanner of your Deskjet.  As the HP notes, this is a very large download, so if you want this package, you must have a high-speed Internet connection or order the CD.
  • The second line, which says "Driver - Product Installation software" includes the basic print and scan drivers.  HP has said, "not all product features are supported with this installation package."  I don't know what "features" are not supported if you choose this option.
  • It should not necessary the "Patch" because or the other of the first two downloads is dated after the patch and so should be included.  After things are installed, you can download and install the most recent of the 3 "Updates".

  When you wrote that the printer "will not work" after a new installation of Windows XP, I assume that the printer is not installed at all.  Just in case, however, previously, you use the package that you download from HP, follow the instructions here to clean all traces of a failed attempt to install it.  (Note: remember "Step 4".)  "Step 6" refers to the directions outlined in the upper part of this post.)

• Keyboard and the mouse does not work after the release of sleep

  Original title: error keyboard and mouse

  After you have installed Windows 8 I had problems with the keyboard and the mouse.

  If the computer disconnects a half our for example, when I come back, the keyboard and the mouse do not work,

  I can not connect and I have to restart my computer to the power button.

  How can I avoid this problem? It happens every day at least once.

  Hello

  1. you are using a wired keyboard or mouse and wireless?
  2. What is the brand and model of the PC?
  3. have you checked if other USB devices work on the PC after you resume the computer from sleep mode?

  I suggest you follow these methods and check if it helps.
  
  

  Method 1:
  If you use the USB keyboard and mouse, and then follow the steps below to uninstall and reinstall the USB controllers.

  (a) press the Windows logo and X from the keyboard.
  (b) type devmgmt.msc , and then press ENTER.
  (c) expand Bus USB controllers.
  (d) right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (e) restart the computer and reinstall the USB controllers.
  (f), check the question;

  
  Method 2:

  The 'USB selective suspend settings' option in the Power Options can be activated.

  (a) press X and WWindows logo and choose Power Options
  (b) click on change plan settings for the selected power plan
  (c) click on that to change advanced power settings
  (d) Expand USB settings and then the USB selective suspend setting and change them to disabled.
  (e) click OK in the power settings window, and then click save changes in the Edit Plan settings window.

  Method 3:
  If this does not help, I suggest to change the power to its default settings and check if it helps.

  You can follow the steps to do this:

  (a) press the Windows logo key and X set and choose power options.

  (b) under the preferred plans, click on balanced (Recommended).
  (c), click Change Plan settings and more balanced (Recommended) option.
  (d) click on restore default settings for this plan on .
  (e) click Yes to save the changes.

  Now check the issue.

  Let us know if it helps. If the problem persists, please answer, we will be happy to help you further.

• Adobe After Effects cc 2015 does not work in windows 7

  Adobe After Effects cc 2015 does not work in windows 7

  . application error

  -l'application failed to start properly (0xc000001d).

  The update of the corrections after effects CC 2015 (13.6.1) is available. It fixes several bugs, including one in discussion on this topic.

  Details: http://adobe.ly/1QqMMc6

  Let us know how things work after installing the update.