How to: run CHKDSK - I have corrupted files

Similar Questions

• Unable to restore my laptop because I have corrupted files.

  Original title: Windows 64 c

  Windows 64 c says I have corrupted files, if I can't restore my laptop to an earlier date. What should I do?

  Hello

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ___________________________________________________________

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• My original XP Pro disc is SP2. I've updated to SP3 and now I have corrupted files and need to repair windows with the disc.

  My original XP Pro disc is SP2. I've updated to SP3 and now I have corrupted files and need to repair windows with the disc. When I put disc SP2 in it tells me that it is a work old version and custom. How to make a disc with SP3 top to repair my OS?

  Hi DFPI.

  I suggest you to uninstall Service Pack 3 temporarily on your computer.

  How to remove Windows XP Service Pack 3 from your computer

  Later, try to repair the computer with the Windows XP disc and check if it works.

  Later, reinstall the Service Pack 3 after the computer repair.

  Reference: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  Hope the helps of information.

  Please post back and we do know.

• How to run BACK 16 bit *. Files EXE in Windows 7?

  How to run BACK 16 bit *. EXE files? (It worked on XP in a DOS window. Is not on Win 7) in addition, *. EXE files created in XP creates a message asking to 32-bit or 64-bit. How to operate these establishments?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  There is a utility called DOSBox which will run on Windows 7 x 64 to run your older with programs. It is available for download at the following site: http://www.dosbox.com/

  And it's free!

• How to: run chkdsk/f, so I can run defrag

  When I try to defrage my computer the chkdsk won't let me not in he said to run it do not know where it is or how to get rid of

  Run chkdsk in accordance with the following article.  Specify the /F or/r option if you use a command prompt or click on the two options if you are using the graphical user interface.  He will tell you that he cannot do it now and it will do so at the next reboot.  Click 'Yes' and restart your machine.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• I have corrupted files as determined by SFC scan. How can I fix that SFC could not fix?

  I used a (RegZooka) registry repair tool and must have damaged some files.  At the time I discovered, RegZooka could not help me, but another suggested that I have run the System File Checker.  I did and got a newspaper that shows some of the files that it could not fix.  How can I fix them?

  Hello.

  The manufacturer's recovery disks do not normally offer the options of 'work' to do a repair Installation

  If you still have problems with files SFC cannot repair, you can borrow a DVD of visits of Microsoft from a friend of friend or work, not the manufacturer's recovery disc and try a repair installation:

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• Anyone have an idea how I can open the Pdf corrupted files?

  Hello!
  

  I have a problem with trying to open old PDF files in Adobe Reader 9 Standard.
  The files were created in 2000, and they must be retrieved to be put on a server.
  The files are on the CD. I tried to save them to the office and opening here and we have always received insufficient data for an Image
  I downloaded earlier versions of Adobe and in each of them I could not open or received the cyclic redundancy error.

  
  

  Concerning
  

  Hello!

  You have to try opening on the other system
  More
  Try copy & paste for example on a different location on your system. C: drive or my document.
  Check the attributes, hope its not to "read only".
  Are all of the PDF files on this problem that Donations CD?
  &
  ->, You can use the PDF optimizer to modify the PDF to an earlier version to see if the problem goes away

  Also I recommend you check out the links below.

  http://community.office365.com/en-us/f/172/t/281213.aspx

  http://www.filerepairforum.com/Forum/Adobe/Adobe-AA/PDF/721-%E2%80%8Bpdf-file-recover

  Read the comments.

• How to run Photoshop jsx on all files in the folder

  Hello everyone.

  I have the script that looks like this (btw, using Photoshop CS5)

  #target photoshop
      // ========== set units to pixels ==========//
      app.preferences.rulerUnits = Units.PIXELS;
      
      //========== set background to white ==========//
      var backgroundC = new SolidColor();
      backgroundC.rgb.red = 255;
      backgroundC.rgb.green = 255;
      backgroundC.rgb.blue = 255;
      backgroundColor = backgroundC;
      
      //========== set var to active document ==========//
      
      var doc = activeDocument;
      
      //========== main() ==========//
      function main(){  
      if(!documents.length) return;  
      var Name = app.activeDocument.name.replace(/\.[^\.]+$/, ''); 
      var CurrentPath = activeDocument.path;
      var saveFolder = Folder(CurrentPath + '/' + 'Shop');
      if(!saveFolder.exists) saveFolder.create();
      var saveFile = File(saveFolder + "/" + Name + ".jpg");  
      
      if(saveFile.exists){  
         if(!confirm("Overwrite existing document?")) return;  
          saveFile.remove();  
          }  
      SaveForWeb(saveFile,70); //change to 60 for 60%  
      }  
       
      function SaveForWeb(saveFile,jpegQuality) {  
      var sfwOptions = new ExportOptionsSaveForWeb();   
         sfwOptions.format = SaveDocumentType.JPEG;   
         sfwOptions.includeProfile = false;   
         sfwOptions.interlaced = 0;   
         sfwOptions.optimized = true;   
         sfwOptions.quality = jpegQuality; //0-100   
      activeDocument.exportDocument(saveFile, ExportType.SAVEFORWEB, sfwOptions);  
      }  
  //========== Set model to RGB ==========//
  doc.changeMode ( ChangeMode.RGB );
  //========== set canvas depending on initial width and height ==========//
  doc.resizeCanvas(Math.max(doc.width,doc.height),Math.max(doc.width,doc.height))
   
   
  //========== check size and do actions acording to size of document ==========//
  if (doc.width > 750){
          doc.resizeImage(750,750);
          main();
          doc.close(SaveOptions.DONOTSAVECHANGES); 
      } else {
          doc.resizeCanvas(750,750);
          main ();
          doc.close(SaveOptions.DONOTSAVECHANGES); 
  }

  Now, I use it as event handler scripts, open trigger on paper, then I drag and drop images and script to do its job. However, if I drag and drop 200 images, PS will load ALL the hogs my PC and probably crash.

  My question is, how can I fix this JSX to run on file, similar to the batch processing dialog box, or image processor, but on both, I can only select Action, no option to select the existing jsx script.

  Thanks in advance

  My question is, how can I fix this JSX to run on file, similar to the batch processing dialog box, or image processor, but on both, I can only select Action, no option to select the existing jsx script.

  You can check/insert a Script in Action.

  Otherwise:

  Photoshop scripts

• How to run the command sqlplus in file beats?

  Hello
  
  I have a simple script file that looks like this:
  
  "admin/admin sqlplus as sysdba.
  stop immediately.
  
  But... when I start this file.bat my system will connect but do not have any script. Sqlplus waiting to order and when I write "exit" I logout of sqlplus and system then executes the following command, which is "immediate stop", but beyond sqlplus (so my base still works). Is it possible to log and run commands file.bat or in some other way?
  
  I am using oracle 11g, windows 7 x 64
  
  Best regards and thx for help
  
  Edited by: 879529 2011-11-27 04:52

  Create a batch file say FILE.bat and a file1.sql to say sql file which contains the sql commands (in your case "stop immediately") and call inside this file sql batch file.

  FILE.bat:
  admin/admin sqlplus as sysdba @C:\file1.sql

  File1. SQL:
  immediate stop

• Using Windows 7, how to run CHKDSK?

  I've looked everywhere in the control panel and it is the sub-menus and options but can find no way to run a scan of disk errors.

  I found chkdsk.exe in the Windows\System32 folder, but when I double click on it, the only answer is a flash of the screen BACK {black, command-line}! Is this the correct answer?

  Not there at - it no way to run the disc [Calendar] a scan [to find errors] as there was in previous versions of Windows?

  He did the same way in Windows 7 as it was in previous versions of Windows:

  1. Open the 'computer '.
  2. Right-click on the drive in question
  3. Select the tab "Tools".
  4. In the error-checking box, click .

• I thought I downloaded Photoshop elements 12 of the trial but may not have to run. I have Adobe download wizard. the trial version seems to be in my files, but I can't run. I have a file number. They said that they were unable to me.  I can't rea

  Can you help me? I think that my Photoshop elements 12 test

  Hi Mag05,

  Once Adobe Download Assistant is installed, you can start at any time and choose a product to download at the bottom of the window. Updates list as new products will be available for download with Adobe Download Assistant.

  Please visit: http://helpx.adobe.com/x-productkb/policy-pricing/download-assistant-faq.html#main_How_do _ I_download_a_trial_version_of_Creative_Suite_or_Elements_software_

  Kind regards

  Rave

• How can I run Chkdsk?

  Hello

  I want to defrag my computer so that it runs faster. I know how to do this, but whenever I go to the program he said: he can't defragment it because C:\$Mft file is corrupt, run Chkdsk utility \f.  Well, I think I found the Chkdsk utility. I run it, but it says: warning F parameter is not defined, in read-only mode. So I think I have run the Chkdsk utility, but not really. I will return to defragment and it still gives me the same message. When I search for all files, it does not find this file. When I sought help it says that you need to run Chkdsk with Autochk.exe or \%systemroot%\System32.  I found this file on my hard drive, but it does not work in windows 32 mode. Whatever it is?  Can someone help me figure out how to run Chkdsk, so that I can get rid of the corrupt files and defragging my computer.

  Thank you

  In your message that you type "Chkdsk \f" and the correct method would be "chkdsk /f" with slash for the chkdsk command options.

  This is one of the many articles that can help you understand how works the command chkdsk and how to use it to your advantage.  It is good to know how to do, but it is also good to understand.

  http://vlaurie.com/Computers2/articles/Chkdsk.htm

  If you do a search on Google for:

  XP chkdsk

  You will find several short articles, which you can read in different levels of detail and scope.

  The chkdsk command can only solve the problems when it runs when XP is not completely loaded yet.  It would be on the next boot of XP before XP is fully charged or the XP Recovery Console.

  CHKDSK can only solve the problems when the volume is locked and in what Microsoft calls a "static condition."  Two ways to ensure that you are in a static state is to run chkdsk from the Recovery Console or to schedule a chkdsk to run the next time the system restarts by responding affirmatively to the question:

  Would you want to check this volume to be the next time the system restarts?

  If you run the chkdsk operation includes recovery of errors and control options (if you choose to fix things) and you let chkdsk runs automatically at the next reboot, you may be interested to know what happens if found (results will disappear from the screen when it is finished).

  Here is how to do this.

  When chkdsk runs automatically restart either because XP thinks he needs to (perhaps your NTFS volume has been marked as dirty) or you have chosen to do it yourself, the results appear in the viewing Application event log.  You should look there for the chkdsk log and no problems after running chkdsk.

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  Search the Application log for an event originally by Winlogon, something like:

  Event type: Information
  Event source: Winlogon
  Event category: no
  Event ID: 1001
  Date: 04/08/2010
  Time: 11:25:57
  Description:
  Checking file system on C:

  The type of the file system is NTFS.

  One of your disks needs to be checked for consistency. You
  may cancel the disk check, but it is strongly recommended
  that you continue.

  Windows will now check the disk.

  Cleaning of minor inconsistencies on the drive.
  CHKDSK checks Usn Journal...
  Audit of the USN Journal is complete.

  39070048 KB total disk space.
  28017948 KB in 100571 files.
  56540 Ko 10556 index.
  0 KB in bad sectors.
  236440 KB in use by the system.
  65536 KB occupied by the log file.
  10759120 KB available on disk.

  4 096 bytes in each allocation unit.
  9767512 total allocation on the drive units.
  2689780 allocation units available on disk.

  Windows has finished checking your disk.
  Please wait while your computer restarts.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• sfc/scannow cannot fix corrupted files windows 8. DISM / /restorehealth//cleanup-online image does not work! Any help appreciated.

  Hello

  I can't try to repair the corrupted files on my Sony VAIO laptop to Windows 8. I hope someone can help me solve my problems. I would really like to know how to fix these problems I'm having. It really gets me.  If ever I have similar problems in the future.
  All my drivers are up to date. I'm pretty confident that's not a malware issue. I take care of my line on activities that could infect my computer. Although I'm not 100% that excludes. I use Mcafee security Suite (fully updated and free with my broadband package). No other scanners time real AV are running. I However sometimes use a registry cleaner, after installation and installation of various programs. but I only use the default methods, never the registry COMPLETE cleaning cleaning method. In my view, these could create problems if used files. I also defragment my HARD drive of 1 TB at least once a week.
  DISM / / cleanup-image online /restorehealth/ also is not working error message and log files can be found below!
  I ran sfc/scannow and several times,
  whenever I get the error message stating:
  Windows resource protection found corrupt files but was unsable to correct some
  of them. Details are provided in the cbs.log windir\logs\cbs\cbs.log newspaper.
  For example C:\windows\logs\cbs\cbs.log. Note that iis logging currently not
  supported in offline maintenance scenarios.
  When I reboot win 8 after running sfc/scannow. Windows 8 shows that it is far from my system of up to 100%
  It charges fine. I have run the sfc/scannow, and then he did exactly the same thing. I reboot and it updates my system. but does not not my files corrupted!
  CHKDSK /F also freezes 27%. But when I starts in the my Sony VAIO #1 recovery disk and run diagnostics hardware HARD drive repair tool to try to fix the sectors defective etc on my HARD drive
  which works 100% and says there is NO problem!
  Here are the files of newspapers that I can access. I have to admit, now, that I do not understand them.
  even after much reading online:
  20/07/2013
  sfc/scannow eror message =

  Windows resource protection found corrupt files

  but has been unable to find some

  of them. Details are provided in the CBS.log newspaper

  windir\Logs\CBS\CBS.log for example C:/windows\Logs\CBS\CBS.log.

  Note that logging is not currently supported in offline scenarios.

  (ACCESS DENIED) when I try to open the C:/windows\Logs\CBS\CBS.log log file.

  DISM / online/cleanup-image /restorehealth/

  21/07/2013 of the log files and error messages

  0x800f081f

  the source file is not found

  Use the source option to specify the location

  the files that are needed to restore the function. To learn more

  information on the specification of a location of the source,

  See http://go.microsoft/fwlink/?linkid=243077

  The DISM log file can be found at C:\windows\Logs\DISM\dism.log
  I hope that I can help to solve the problems of thses
  concerning
  How to run the command "SFC/scannow" at startup or in Windows 8
  Information

  This will show you how the sfc/scannow command to start or in Windows 8 in an attempt to trouble altered or modified system files.

  Tip

  If you get the error that Windows resource protection could not start the Repair Service when you try to run the SFC, then make sure that the Windows Modules Installer service is active and set to Manual.

  Services - Start, Stop and disable in Windows 8

  If SFC is unable to repair the system files corrupted because the Bank (source) is damaged, then you could run the Dism/online/Cleanup-Image /RestoreHealth command to set the Windows component store corruption and then then try to re-run the SFC scan.

  OPTION ONE

  To run the SFC/SCANNOW command. at startup

  
  1. open a prompt at startup.

  2 in the command prompt, type diskpart and press ENTER, and then type the size of the list and press ENTER. (see screenshot below)

  
  
  
  3 make Act your boot drive drive letters (ex: 350 MB "System Reserved" partition) and the drive of Windows 8, type Exit , and then press ENTER. (see screenshot above)
  NOTE: If you do not a "system Reserved" partition and are not multi-boot with other operating system, then the boot drive and the drive of Windows 8 may be the same drive letter.

  4 in the command prompt, type the following command and press enter. (see screenshot below)
  NOTE: , You will see a blinking cursor at the prompt to the end. It will take a while to finish running though.

  sfc/scannow damaged = C: \ /offwindir = D:\windows

  Note

  You need to replace the the drive letter of the partition or volume where your Startup system files are stored in the offbootdir = C: part of the order above instead.

  You need to replace the letter of your partition or volume Windows 8 in the offwindir = D: is part of the above command instead.

  
  
  
  5 when the analysis is finished, I hope you will see an everything is ok message as below.
  
  
  
  6 close the command prompt and restart the computer to start Windows 8.
  Note

  If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

  If this isn't the case, then run Dism/online/Cleanup-Image /RestoreHealth to repair any corruption component store, restart the PC later and try the sfc/scannow command.

  If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file system occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

  If not yet, then you can use the steps in the TIP box in the THREE OPTION section below to manually replace the files SFC could not fix.

  SECOND OPTION

  To run the SFC/scannow command in Windows 8

  
  1. open an elevated command prompt in Windows 8.

  2 in the elevated command prompt, type sfc/scannow , and then press enter. (see screenshot below)
  NOTE: It may take some time to complete the race.

  
  
  
  3 when the analysis is finished, I hope you will see that all is ok message as the screenshot below.
  NOTE: Fortunately CFS was able to repair my files automatically damaged system.
  
  

  

  Note

  If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

  If this isn't the case, then run Dism/online/Cleanup-Image /RestoreHealth to repair any corruption component store, restart the PC later and try the sfc/scannow command.

  If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

  If not yet, then you can use the steps in the TIP box in the THREE OPTION section below to manually replace the files SFC could not fix.

  OPTION THREE

  How to see and read that only "CFS" Scan results from CBS. JOURNAL

  NOTE: SFC when is running, it records its actions in the C:\Windows\Logs\CBS\CBS.log. The steps of this option will show you how to view only specific SFC entries with the [SR] tags in the CBS.log newspaper. This can be useful to show you what files SFC couldn't fix automatically if you want to try and manually change them.

  1. open an elevated command prompt in Windows 8.

  2 in the elevated command prompt, copy and paste the following command and press enter.
  NOTE: This will place a file sfcdetails.txt on your desktop with only the SFC scan details of the results of the CBS. Log in this.

  Code:

  findstr /c:"[SR]" %windir%\Logs\CBS\CBS.log >%userprofile%\Desktop\sfcdetails.txt
  

  3 close the elevated command prompt.

  4. open the file on your desktop to see the SFC sfcdetails.txt analysis details in convertible bonds. NEWSPAPER.

  5 when you are finished, you can safely remove the sfcdetails.txt file later if you wish.

  Tip

  If you need to replace a corrupted system file that SFC cannot fix, this will show you how to:

  If you have many files are corrupted, then run Dism/online/Cleanup-Image /RestoreHealth to repair any component store corruption, restart the PC after and try the sfc/scannow command.

  If you have only a little, then you could manually extract a new copy directly from your installation of Windows 8 DVD or USB thumb drive, or ISO if file in a virtual machine.

  Check out the Windows 7 Installation DVD files

• Why I run CHKDSK cant since a prompt cmd on the start menu.

  Do I need a subscription special to run chkdsk these days or something! You get ridiculous with all these permissions in Microsoft file. You're going to have geeksquad running red flower in the face, embarrassed as _ because he cannot understand
  How to run CHKDSK with eleveated privileges. Well I tried and still no luck, embarrassing isn't? It will however run out of system32.
  It does not work from the cmd prompt start menu without elevated privileges. I tried to change the permissions of security and even taking and evolution of the property from the user account created during the installation of RC7, which is be in the users group, not to the Administrators group. Run from the system32 directory it is impossible to specify the /F switch so that it can be run on the next startup. Come on Microsoft, meet... CHKDSK is completely useless, our taken utility... can you imagine past a repair with that call?

  Hi eKrAsh,

  Thank you for using answers Forum.

  You can click Start, click computer, then right-click on the C: folder (if it is the HARD drive) and click on properties, then click on tools.

  You can click on the button check now in the error checking section to test the CHKDSK command.
  You may have to restart your computer.

  I hope this helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• SFC found corrupted files, but some has not been repaired

  I ran SFC and he found some damaged files, but said that the ILO was not able to fix some of them.

  How should we do fix these corrupted files?

  James

  James

  You can run the DISM to repair store.  Read about it at the end of this wiki