How to run dvd Windows(32/64) installation?

Similar Questions

• How to run without Windows DVD recovery

  Hiya,

  I just lost my windows vista DVD and now just format the C drive. But I saw there are still available on the drive D. can recovery drive please tell me how to run recovery or restore the origional windows vista again.

  Thank you very much

  Hello

  You will need to contact the system manufacturer's support, as each has its own methods of restoration.

  Also they will sell you the Vista DVD at low cost since you already Windows. Know you
  need the code produced so if you do not then discuss with them. Sometimes the
  product code is located on the computer or included with the paperwork.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to run the windows outside the folder of the source installation

  I have a windows dvd configuration I copy on my usb device and I don't want a folder that comes with the DVD. I'm using EasyBCD to edit and create the start menu (Windows 8 Pro).

  I put the install.wim image in the same folder as my boot.wim, but in the installer it says: A required CD/DVD drive driver is missing. I loaded driverpacks.net mas pack storage in the boot but wim file no luck. I joined integrated with dism.

  Hey Elliot,

  As you try to change the boot files by using EasyBCD, you can get in touch with EasyBCD support for assistance.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• How to get the Windows XP Professional installation CD.

  Hi all, I have a genuine Windows XP Professional installed on my PC but the CD I installed it since has been damaged and now I don't have the disc to install Windows again if need arises. Please suggest me ways to get a new Installation CD or an ISO image of it that I can burn to a disc. I would appretiate your help in this matter. Concerning

  Hi all, I have a genuine Windows XP Professional installed on my PC but the CD I installed it since has been damaged and now I don't have the disc to install Windows again if need arises. Please suggest me ways to get a new Installation CD or an ISO image of it that I can burn to a disc. I would appretiate your help in this matter. Concerning

  How to replace hardware or lost, broken, or missing Microsoft software
  http://support.Microsoft.com/kb/326246 if you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

• How to run a window of data acquisition and another pane at the same time

  Hello

  I have a main window for data acquisition and in front panel there are four Sub Vi. When the main window of data acquisition is running and at the same time if I run the Subvi - main window stops data acquisition and the secondary window starts to run. But I want to launch the window of acquisition of primary data and the pane at the same time. Please give me a solution for this...

  Thanking in advance.

  Nikhil

  Hi Nikhil,

  My explanation has answered your question. Take a look at the image as an attachment. Let us know if you have any other questions.

• How to run the VMWare virtual machines in Microsoft Azure cloud?

  How to run VMware Windows Virtual machines to Microsoft Azure cloud?

  Thank you

  Vincent

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• ThinApp 5.2 fails to run on Windows 10

  Someone had trouble with ThinApp 5.2 running on Windows 10?  Installer works great, but all installed applications on startup crash.  Capture.exe installation and log_monitor.exe that both fails every time that they are run.

  VMware support confirms the version 5.2.1 is not currently available for evaluation.  This is an important gap, in my opinion.  If we are unable to evaluate the product on the most recent Windows platform available, we are unable to testify to the usefulness of the product for a large part of the company.  VMware: Please make available for evaluating v5.2.1!

• How do itunes run on windows Vista?

  I used to run Itunes on my windows Vista computer. Recently, my computer crashed. I did a clean reinstall of windows Vista and downloaded Itunes again after that. Before installing, I saw that I would get a version for XP and Vista, so it should be the correct version.
  However, on trying to install it, I got a message that itunes works only on Windows 7 and more. How to run again?

  The most recent (and probably final) version of iTunes which takes supports Windows XP 32-bit and Windows Vista 32/64 was issued in September 2015. It includes support for iOS 9, although not Apple music. The Apple software update, it will not necessarily be looking for you and may ask you to update when you are not. The iTunes download page can't give it to you or the other.

  • 12.1.3.6 iTunes for Windows (32 bit) - iTunesSetup.exe (2015-09-16)
  • 12.1.3.6 iTunes for Windows (64 bit) - iTunes6464Setup.exe (2015-09-16)
  • 12.1.3.6 iTunes for Windows (64-bit-for older video cards)- iTunes64Setup.exe (2015-09-16)

  See troubleshoot problems with iTunes for Windows updates if you have problems with installation, or for direct links to the current or other recent versions.

  TT2

• How to return to windows installer? Bootcamp

  After my bootcamp partition, the computer has been restarted with the windows installer. I got to the part that says select partition to install windows. I read the message that he is not the right format requires NTFS. Well, I clicked format and it made me nervous because he said that he would erase everything. So I closed out of the installer to see after some research, I actually just click on the format button. My question is, is there anyway I can go back to where I run the windows 10 installation to install or I have to delete my bootcamp partition and completely from the beginning.

  It depends on your year/model of Mac. If a USB Installer has been created or a DVD has been used, there is no need to recreate the partition. In the case of 2015 Mac, you need to remove the partition and recreate. Please create a partition of sufficient size (about 50-60GB) to avoid future problems.

• Error message: windows\system32\difxapi32.dll isn't is either not designed to run on windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for

  Hello

  I keep getting error messages when I use the computer. It started two days after you download an update from Windows. A sample of the error is:

  C:\windows\system32\difxapi32.dll is not designed to run on windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.

  I use a vista. I don't know how to solve this problem, many want to help.

  Thank you.

  Hi Colinthebrave:

  Start with this little tool to help get rid of the error, once your system is stable again and then try to run your updates again.

  Thank you for your message; Let us know how it goes.

  o

  o The System Restore tool

  If the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose another restore point and then click Next.

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  4. click on finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Don
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to get a windows Vista Home Premium 32-bit installation disc?

  My computer is an emachine T5086.  It has Windows Vista Home Premium and when loading drivers they stop loading at "windows32 drivers/crcdisk sys. I don't know what that means.

  Then, the computer restarts and asks me to install my windows installation disc for repairs.  F8 on reboot is not available as an option.  I don't have a repair option I turn on the computer and hold down the F8 key manually.  I don't have a windows disk or recovery disk and I can't to where I can find a restore either point.

  How to make a windows Vista Home Premium 32-bit installation disk?  I have my product key. Or where can I get one?

  Hello

  There are different methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact the manufacturer of your computer, eMachines and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  http://www.eMachines.com/EC/en/us/content/home

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Windows 7 Setup installation of Windows not can set up Windows to run on this computer hardware"

  I had a problem with my Windows 7, installed on a Dell Latitude E6520 Laptop computer. I didn't have a critical data on it, so I decided to do a full clean install.

  I used my Windows 7 disc, started on the disk, wiped the hard drive and begin the installation.

  The system through appropriate measures (at least seems that Yes) up to the last step

  When it is to "Finish the Installation" (the last restart)

  It goes through startup Services then I get an error "Windows Setup cannot configure Windows to run on this computer s hardware.

  I'm not sure that understand what's happened. Same computer - drives that came with it - but suddenly it won't take the configuration?

  Help, please.

  OT:

  Windows 7 will not install

  http://www.Dell.com/support/article/us/en/19/DSN_362066/en

  How to restore your Windows 7 computer with a Dell factory settings.

  You may need to restore your computer to factory settings to fix computer problems or outages or to delete your information from the system.

  Follow these instructions to reset your computer using the Dell Factory Image Restore that come from the factory on your computer.

  Notes:

  • This process only defines the c: back to factory settings and leaves the other partitions alone.
  • If you have removed the Dell Factory Image Restore partition, then the possibility of using the Dell Factory Image Restore will not appear and you need to reinstall the operating system, manually or from a backup. For more information, refer to the Dell Knowledge Base articles How to manually reinstall Windows 7 on a Dell computer? (when you have installation discs) or My Dell computer did not come with disks.
  Warning: restore your computer to factory settings will delete all the files and programs with the exception of those it came with. You will lose all personal files, including photos, emails and programs, if you don't back up your files and data. Please see here for more information Dell backup and recovery

  To restore your Windows 7 computer to factory settings

  1. Back up important files and data. If you do not back up your files, you will lose them.
  2. Turn off your computer.
  3. Disconnect everything but the monitor, keyboard, and mouse. This includes your:
     • Scanner
     • printer
     • modem or network cables
     • mobile phone and Tablet
     • Another external hard drive or USB flash drive
  4. If your laptop is docked, remove it from the docking station.
  5. When the Dell logo appears on the screen, press F8 to open the Advanced Boot Options.
     Note: If the Advanced Boot Options menu does not open, wait for the Windows login prompt. Then, restart the computer and try again.
  6. Use the arrow keys to select repair your computer and press enter.
  7. In the System Recovery Options menu, select a keyboard layout and click Next.
  8. In the next screen, you can connect as a local user or administrator.
     Note: Use the drop-down list to the right of the user name: to select the local user or the administrator account and enter the password for this account. If you have not set a password on the local user account, leave the password empty space and click OK.
  9. Depending on your configuration, you may need to select Tools Factory Dell , then Dell Factory Image Restore.
  10. Click Next to open the menu to confirm the deletion of data.
  11. Select the Yes, reformat hard drive and restore the factory State system software and click Next.
      Note: The restore process begins and may take five or more minutes. A message appears when the operating system and the applications installed in the factory have been restored to the State of the plant.
  12. After the restore operation is completed, click Finish to restart the computer.
  13. Restore all data or programs that you want to back up files.

• How to run tourbo c in windows 7 64 bit

  How we run toubo c ++ in win7 64-bit version of windows

  hi.........
  Turbo C does not work in Windows 7 64-bit [because it is not compatible with 16-bit programs] but would work in 32-bit.
  So to make it work on 64-bit operating system, we take BACK emulator DOSBOXusing...

  • First of all download Turbo C this version.

  http://205.196.123.145/eed1ly0lil6g/r8z121ojyzwodsp/Turbo+C.zip

  • Download BACK Emulator.Link below

  http://NCHC.dl.sourceforge.net/Project/DOSBox/DOSBox/0.74/DOSBox0.74-Win32-installer.exe

  Visit this site
  http://www.mycfiles.com/2011/07/installing-turbo-c-on-Windows-7-64-bit.html

  If this useful for you... Please say YES
  Ayikomath

• If I have a macbook but parallel platform for vmware to run windows for mac, how to make the windows side to recognize the connection wireless from my mac

  If I have a macbook but parallel platform for vmware to run windows for mac, how to make the windows side to recognize the connection wireless from my mac

  Hello

  -You use Boot Camp as the Boot Manager? If so, make sure that all boot camp for Windows 7 drivers are installed.

  -You receive an error message?

  If you use Boot Camp, I suggest yo 1All operations from the below mentioned link and check if the problem persists.

  Boot Camp: Windows 7 Installation, frequently asked questions

  http://support.Apple.com/kb/HT3986

  For reference:

  Support for Boot Camp

  http://www.Apple.com/support/Bootcamp/

  Hope this information helps.

• How to create DVDs of backup for windows 8.1

  Hi I have windows 8 on my laptop that has been upgraded to windows 8.1, later. Now, I want to prepare the backup my windows bootable dvd, so please tell me how to proceed?

  Create an installation media for Windows 8.1