How to run the program success unlock the screensaver with password with windows xp

Similar Questions

• Can I run the screensaver with strikes?

  I use Windows 7.  In an earlier version, I was able to launch the screensaver with the keys.  I don't know if I can do it in 7.

  Hi Holmesthecat,

  Try the steps and check them off below if it helps:

  1. create a shortcut to the file on the desktop scrnsave.scr, location: C:\Windows\System32 and then create a keyboard shortcut.

  To create the shortcut:

  Navigate to the location.

  II. right-click on the file

  III. in the list, select send to desktop

  2. create the file keyboard

  To create a keyboard shortcut:

  i. right click on the file

  II. Select Properties

  III. under the keyboard shortcut, type in the character

  You can check the link below:

  Create keyboard shortcuts to open programs: http://windows.microsoft.com/en-US/windows7/Create-keyboard-shortcuts-to-open-programs

  If you have set any particular shortcut to launch the screensaver, then you should be able to launch the screensaver.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to solve the problem with Windows Update on Windows 7 64 bit Home Premium SP1; Module Windows install encounter error 126, impossible to run/scannow sfs or TrustedInstaller. Help, please

  Hello

  First of all, thank you in advance for any advice for any help, you can offer.

  A week ago I noticed that Windows Update had a backlog of updates (30-40) as I had it value updates but let me choose whether to install them. As I tried to install, I noticed download election for hours but no visible progress in the taskbar and only a few updates installed on restart. Try to check the updates of similar results. I tried a number of solutions suggested here as a tool for troubleshooting Windows Update, but it made that seem to clear my list of updates to uninstall and make sure Windows Update has been under the impression that I had never checked the updates, apparently a worsening of the problem like today no update appeared and I encountered error 8007000D.

  I've tried other options like Windows system update readiness tool and tried to run the sfc/scannow System File Checker, but what who would not (cannot start service repair) I grew more and more worried. On recommendation from other forums, I tried also to start TrustedInstaller in command prompt, which does not. Unfortunately, I had run a Disk Defrag and clean-up recently which had been deleted and (unbeknownst to me) my last restore point. The root of the problem seems to be the Windows Modules Installer, which does not start when you are prompted in Services (error 126), something wrong with the registry may. So reluctantly, I tried to perform a repair installation using a downloaded iso, I burned onto a DVD (insured was also Windows 7 Home Premium 64 - bit SP1). However, even if it doesn't seem to work, it is constantly check for installation updates (unless this is supposed to last several hours?) or if I opt not not to check, it pass the compatibility check and then fail in the second stage (collection of files, settings, and programs). I tried several times, once in offline mode with my disabled (Norton) antivirus and once in clean boot mode.

  I don't know what other options I have. I would like to avoid a clean as much as possible installation, because my computer (HP laptop) still seems to operate normally (for the moment) outside the impossibility to install Windows updates (via Windows Update or directly from Microsoft, it seems), but I think it would just leave vulnerable more and more over time. Has anyone else had similar problems and has found a way to solve? I'm not a computer expert so any help would be greatly appreciated.

  Hello

  Try the troubleshooting steps in this link: error message when you start the service installer of Modules of Windows (TrustedInstaller): "system error 126: the specific module could not be found".

  Let us know how it goes.

• How install/run the soft token RSA on Windows 8?

  I'm a consultant, and my client uses the Soft-Token RSA software so that I can work remotely from time to time.  I just bought a new laptop from Windows 8, but can't seem to install the RSA on it.  Someone was able to install and run the software RSA Software Token on Windows 8?

  Thanks for any help.

  Hello Manegame,

  The Soft token RSA software is not on the Windows 8 Compatibility Center. You should check with the manufacturer to see if they have information on compatibility.

  You can install in compatibility mode for Windows 7, Windows Vista or Windows XP.
  You can right click on an .exe file and choose to resolve compatibility issues.

  Or you can go to the Control Panel, click on troubleshooting icon and follow the instructions.
  Select next, run programs for previous versions of Windows.

  I hope this helps.

  Marilyn

• How to run the script with parameters such as alarm action .ps1

  Hello

  I know not how to configure alarms, I know that I can point to monitor cluster for changes (via the GUI), but... I have different groups and I would like to set an alarm by vCenter which monitors cluster for changes. Let's call it "RefreshCapacityInfoOnExternalDB".

  So, lets just say. I would like to run my script whenever a virtual computer is added, Reconfigured or ESX host are removed, added in a Cluster. The alarm would launch the .ps1 script written in turn the ability to update external db cluster info.

  Shortly said: ability to cluster values are changed

  What I need is this: run the script-> CapacityInfoRefresher.ps1 < Cluster_name_where_ReconfigEventsTookPlace >

  I guess that, first I need an environment variable (if it exists) that can be used as a parameter for the < Cluster_name_where_ReconfigEventsTookPlace > placeholder script. Right?

  Chapter 16 of the book of LucD & Friends "PowerCli reference" mentions some environment vars but I'm stuck. Anyone using these options?

  THX

  A.S.

  You can set your alarm on the node above in your vCenter tree, this way it will be active for all collections in the vCenter.

  These alarm environment variables are automatically available for your alarm script when it is triggered.

  These environment variables, you will be able to determine to which cluster the alarm was pulled.

  So I don't think that you need to pass this information as a parameter to the script.

  Perrhaps you could share what exactly alarm you want to set and what looks like the script which should trigger alarm.

  And Yes, I use these environment variables in scripts of alarm

• How to run the managed server weblogic as windows service

  Hello friends,

  I want a guide step by step to run the managed server and the application via the windows service.

  I am able to create admin server as a windows service. I tried a lot of managed server, but not luck.

  Please help me to solve it.

  Hello

  Here am attached the script to create a windows service for p6 service I used for my management environment.

  SETLOCAL

  Set DomainName = P6EPPM

  Set USERDOMAIN_HOME = C:\Oracle\Middleware\user_projects\domains\P6EPPM

  Define SERVER_NAME = P6

  Set PRODUCTION_MODE = true

  Set ADMIN_URL =http://p6eppmdev:7001

  CD % USERDOMAIN_HOME %

  call %USERDOMAIN_HOME%\bin\setDomainEnv.cmd

  call "C:\Oracle\Middleware\wlserver_10.3\server\bin\installSvc.cmd".

  ENDLOCAL

  I hope it will work for you.

  Try this and updated the forum.

  Concerning

  Kumar

• How to format the disk with Windows Vista to install Windows XP

  Hi, I would like to format my laptop and put Windows XP, but when I tried to start using the XP cd does not recognize the HARD drive, the type of my HARD disk is SATA
  I think that I need to download specific drivers, but I found no drivers on the toshiba Web page
  Thank you

  Hi Bertoni

  Sorry, but I must be honest now: I am ready to help, but I hate it when someone write about problems, but not write a which model of laptop. How to check the download page and you give any information when nobody knows what model of laptop you have?

  Let us know what model of laptop you have and we can continue the discussion. Otherwise visit category where your laptop and I am 100% sure that you will find the right answer it?

• How to reset the Local administrator password in Windows Server 2008

  Original title: reset Local Administrator

  How can I reset all my password of Local administrator using a GPO on windows server 2008

  Hey isaberthe,

  Just for future reference, all the problems of Windows Server goes to TechNet forum. Microsoft Answers support only consumer related research. You can find professional support services in TechNet forum.

  Here is the link from TechNet:

  Windows Server forums

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to fix the problem with windows to format external drive and lightroom

  I'm working on an imac with lightroom 4. I've already imported photos from an external drive that is formatted for windows. I made some changes using LR develop module but I would also use my NIK plugins. Lightroom does not allow me to export to the Nik plugins because the files are on a windows format. How can I copy/paste the photos on a mac to the disc format while keeping my changes? In addition, how re - import these files in the mac player in LR? At the present time, these files are shaded on b/c they are already in LR on the windows disc. Help?

  TUxera is a utility that gets around this limitation of Mac.

• I created a movie in movie maker xp - how to access the movie with Windows movie maker 7?

  I want to access the movie file and continue working on it.  Movie Maker (MM) W7 does not open my movie file 1-1/2 years.

  I have a new PC with W7 - I also tried to open MM in virtual XP mode. No luck. There is an MM program in XP mode, but it does not open.  I was charged correctly MM in XP mode from the internet. Loaded, it does not open.

  Is there a way to convert the file MM XP to W7 MM? Much time was spent in a series of films when I was with my old PC with XP and I'm guessing that the XP of MM version now I can't access the files!

  Help!

  No guarantee but something you could try...

  There are two older downloadable versions of Movie Maker
  that will run on Windows 7... Maybe one of them would be open
  your. MSWMM Movie Maker project file. (you do not have XP
  Mode for these)

  And... you must have copies of 'all' (Photos source files,
  Video clips, Audio clips that were in the project). If you are
  success by opening the project file... you will see red Xs.

  Right-click the Xs and navigate to the location where you
  saved the source files to restore the path.

  * Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows Movie Maker Installer for Windows 7
  http://noeld.com/programs.asp?cat=video#wmminst

  Also, Movie Maker 2.6 will work on Windows 7:

  Windows Movie Maker 2.6
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=34
  (this is similar to the version of Win XP Movie Maker 2.1)

  Good luck...

• How to adjust the brightness with windows xp

  My screen is too bright.  How can I set the screen to lower it for windows XP

  My screen is too bright.  How can I set the screen to lower it for windows XP

  Brightness, contrast, etc., are controlled by the knobs located on your monitor. RTFM for the monitor for more information.

  (Tip: just by tilting back can help).

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• How to make the banner with Windows Vista.

  Is there a program on Windows Vista home 64 to make banners?

  Thank you, redcarousel

  A banner could translate into words that scroll on your screen, or it could mean a banner you wave a flag pole, if the latter then no.

• How to configure the screensaver with password without needing the password to connect?

  Under 'control userpasswords2', I didn't put no password required to connect, and I'd like to set password for the screen saver if computer 30 minutes of inactivity.

  Anyone have any suggestions on how to do it?
  Thanks in advance for your suggestions

  If you want a CV of login password for your screen saver, you must create a user account that is password protected.

  That's what you have asked us how to do here?

  See you soon.

• Windows 8 How to restore the backup with Windows 7 files

  I have files backed up using using Windows 7 backup and restore utility. I installed Windows 8 and you want to restore the files supported by Windows 7. How it's done.

  Open the start screen and type "file recovery" to search for, then click on the category of settings and open the Windows 7 recovery file.

  
  You may need to click on "select another backup to restore files from" on the screen of file recovery.

• How to run the program success unlock (windows + L)?

  Hello

  I have a problem. I need to create applications, including auto, run the application (.exe) release of windows (windows + L). How can I do?

  I'm doing this:

  1. create my (string value) in: HKEY_LOCAL_MACHINE, ' SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\RUN, but this automatic execution is after lockon, but I want to run automatic after release

  I use Microsoft Windows XP Professional SP3

  Hello

  Unfortunately, it can be done. It is not possible to make these programs that automatically run windows release.