How to solve the problem with Windows Update on Windows 7 64 bit Home Premium SP1; Module Windows install encounter error 126, impossible to run/scannow sfs or TrustedInstaller. Help, please

Hello

First of all, thank you in advance for any advice for any help, you can offer.

A week ago I noticed that Windows Update had a backlog of updates (30-40) as I had it value updates but let me choose whether to install them. As I tried to install, I noticed download election for hours but no visible progress in the taskbar and only a few updates installed on restart. Try to check the updates of similar results. I tried a number of solutions suggested here as a tool for troubleshooting Windows Update, but it made that seem to clear my list of updates to uninstall and make sure Windows Update has been under the impression that I had never checked the updates, apparently a worsening of the problem like today no update appeared and I encountered error 8007000D.

I've tried other options like Windows system update readiness tool and tried to run the sfc/scannow System File Checker, but what who would not (cannot start service repair) I grew more and more worried. On recommendation from other forums, I tried also to start TrustedInstaller in command prompt, which does not. Unfortunately, I had run a Disk Defrag and clean-up recently which had been deleted and (unbeknownst to me) my last restore point. The root of the problem seems to be the Windows Modules Installer, which does not start when you are prompted in Services (error 126), something wrong with the registry may. So reluctantly, I tried to perform a repair installation using a downloaded iso, I burned onto a DVD (insured was also Windows 7 Home Premium 64 - bit SP1). However, even if it doesn't seem to work, it is constantly check for installation updates (unless this is supposed to last several hours?) or if I opt not not to check, it pass the compatibility check and then fail in the second stage (collection of files, settings, and programs). I tried several times, once in offline mode with my disabled (Norton) antivirus and once in clean boot mode.

I don't know what other options I have. I would like to avoid a clean as much as possible installation, because my computer (HP laptop) still seems to operate normally (for the moment) outside the impossibility to install Windows updates (via Windows Update or directly from Microsoft, it seems), but I think it would just leave vulnerable more and more over time. Has anyone else had similar problems and has found a way to solve? I'm not a computer expert so any help would be greatly appreciated.

Hello

Try the troubleshooting steps in this link: error message when you start the service installer of Modules of Windows (TrustedInstaller): "system error 126: the specific module could not be found".

Let us know how it goes.

Tags: Windows

Similar Questions

  • How to solve the problems of windows 10 shut down (power, lighting the keyboard is always on)?

    Nice day

    How to solve the problems of windows 10 shut down (power, lighting the keyboard is always on)?

    with regard to my question above. I need to hold the button of power for 5 seconds to completely shut down my laptop. even restart or sleep does not work well. I upgraded a real victory 8.1 to 10 free victory by that windows app reservation offered. IM using acer aspire v5 - 573 g i7, version gt750m, Finnish keyboard

    solutions, I tried to random searches that did not work for me.
    1 unchecking quick stop to power options
    2 disabling hibernation in cmd (types a code forgot what I have)
    3. update all drivers and bios with sites acer official drivers, driver pack solution 15.8 and utility driver update intels
    4 decommissioning intel management engine components driver 11 to 9.5
    5. go to the bios and reset to the default settings
    6 make a shortcut of "shutdown" with codes e.g. shutdown /s /t 0
    7. click Update stop

    IM thinking of reinstalling windows 10 via recovery which removes applications, files, drivers, etc. and hope this solves. I can't roll back to win 8.1 because ive done this reset before you completely clean out my system of win random 8 and trashes the restore option was gone.

    Thanks in advance

    Hello/Hallo wuschel93,

    exactly what I had. Stop number appears only after a certain time the laptop running.

    The problem is INTEL MANAGEMENT ENGINE RELATED V.11!

    I fixed it with uninstall Intel Management Engine Version 11. Windows will then install version 9.5 automatically. After that I turned off the automatic update of the driver for this device. You can also install 9.5 without uninstalling the old one, it wil crushed.

    Other manufactures also have this problem, but while Acer is still asleep, they provide a solution (including download links):

    http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/sleep-and-shutdown-issues-after...

    Maybe there are any other issues that result in the same problem. But in most cases, it's the answer. The thread Starter maybe forgotten to disable the automatic driver update or made installation of v9.5 evil?

    TEPCO

  • How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen.

    How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen. I have install windows 10 and fresh, new drivers for wacom bamboo, could he makes problems or there is a problem of photoshop?

    It should do.  You use one of the buttons of pen maybe?  Just touching wheels with the pen with no buttons or modifier keys.  Press ENTER to close the selection.

    Personally I never use the lasso, Polygonal, but rather just the Lasso tool by using the ALT (Opt) to operate the Polygonal tool.  I also use the mouse instead of the Tablet for the selection of cutting edge.  It is a little too uncertain where the point will go when hovering the stylus above the image.

  • How to solve the problem with unlocking my drive protected by Bitlocker?

    Original title: my local disk dsik win 7 Home premium has been automatically locked by bitlocker drive encryption. How can I unlock since it is a kind of locker found in home premium. Please someone help!

    my local disk drive win 7 Home premium has been automatically locked by bitlocker drive encryption. How can I unlock since it is a kind of locker found in home premium. Please someone help me!

    Hi bernard Penhoat,.

    ·         What version of Windows are you using?

    BitLocker is not available in Windows 7 Home Premium.

    BitLocker Drive Encryption

    Provide the screen shot for the show to help you further.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-C620-401c-A804-9f6337cd3053

  • How to solve the problem with the update code o646

    E-mail address is removed from the privacy *.

    Hello

    Please remove your email address, because it will attract spammers.

    Try this 1st to see if it helps, and it should:

    Description of the Patch registration cleanup tool
    http://support.Microsoft.com/kb/976220/

    ------------------------------------------------------

    If necessary :

    Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
    or the update itself - double click a view more information (or click top then discovers on the right)

    Those who will take you to a page where you can download the update.

    Or go here and the KBxxxxxx number to download it.

    Download Center - mount the KBxxxxxx.

    Microsoft Download Center
    http://www.Microsoft.com/downloads/en/default.aspx

    Download - SAVE - go to where you put them - click on - RUN AS ADMIN

    Then you can right click on the update in the updates Windows and HIDE.

    If you get an error Installer install this version:

    Windows install 4.5 Redistributable
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

    ----------------------------------------------------

    Then run this:

    How to reset the Windows Update components? -a Mr Fixit
    http://support.Microsoft.com/kb/971058

    Description of the system for Windows Vista, Windows Server 2008, update tool and
    for Windows 7
    http://support.Microsoft.com/kb/947821

    ------------------------------------------------------------
    Because these are all Office updates you might get more information if necessary in the Agency of those groups that
    may have experienced the same problem.

    Office newsgroups
    http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

    Microsoft.public.office.misc discussions
    http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

    ------------------------------------------------------------

    If necessary you can incident free get reports however the above should take care of it for you.

    Windows updates - free Incident report

    Go here and click on-> Windows Update fails while searching, downloading or installation of updates
    http://support.Microsoft.com/GP/wusupport#tab3

    The security updates, you can get free support Incident report
    http://www.Microsoft.com/protect/resources/support.aspx

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • How to solve the problem with the BSOD errors of memory?

    Original title: Windows 7 BSOD "memory management".

    So basically, I made a similar post about 3/4 weeks ago and only received assistance to a certain extent.

    My problem is that I get a BSOD "memory management".
    Dumps are here for you to watch (you need to perhaps copy and paste the link in your URL):
    https://SkyDrive.live.com/redir?RESID=871E879B9D5671EC! 186 & authkey =! AL1N44iVMCM3JFw

    My OS is Windows 7 Pro.

    There are a few changes I made in recent weeks. Before, I had a Netgear USB wireless adapter and when I had that my PC had this crash at least once a day. But I now have a TP-Link wireless card. However, my PC crashes again every 3 days, no more and no less. Weird huh?

    Record PC hardware:
    Power supply 650W Powercool,
    Motherboard Asus M5970 Pro
    AMD processor with Six cores bulldozer 6100 3.3 GHZ
    Corsair Vengeance 8 GB 1600 MHZ RAM.
    Western Digital drive hard 500 GB.
    Western Digital 250 GB hard disk
    SAPPHIRE RADEON HD 7750 1 GB graphics card

    I also tried to buy the new RAM, but this did not improve the situation. I still had the accident itself, so I changed back to my old RAM and got a refund because the question is obviously not with the memory RAM (so please not a single mention to run the memtest).

    In addition, with the second disc HARD (250 GB) connected inside with my XP on, sometimes I hear it make a noise as if it is off, which is obviously because of the PSU not put enough power, I read about the BSOD memory management can easily be solved by upgrading the PSU and just want to collect some more experienced opinions before eventually trying this , I really don't want to buy a whole new PSU and then send it again that the problem is still happening (like I did with the RAM).


    I arrived at my own theory that perhaps I may need to lower the frequency of the RAM in my BIOS, or maybe overclock. If someone could help, it would be great. Thanks to all in advance

    The trickiest part is the every three days, not more not less. I shouldn't have overlooked than before.
    This could possibly come from a program that tries to access Windows or the
    Internet in this time (automatic update?). Perhaps something to do with your wireless network card, or even something like your anti-virus.

    "Hmm maybe it's the question then? the RAM is running at 1600 mhz, and even if my processor is a 3.3 Ghz, it is still running at 3.6 Ghz (even if I haven't myself)"
    Ooops sorry :) - looks like I got confused somehow your message with one using a Phenom 945.
    Your processor can execute with a max of 1866 Mhz RAM, but your mobo still has a 1333 Mhz max
    If the system is not what OC'd
    The 3.6 Ghz is "turbo" (auto overclocking) processor speed. If the speed of the cpu is still at 3.6 Ghz
    Perhaps because of the RAM being set at 1600 Mhz. If you set the RAM by default in the BIOS, it won't
    stop the cpu of the use of turbo mode when he needs extra grunt.
    It is also possible (I have not used a processor with turbo, then only speculate) the cpu OC is the RAM at 1600 Mhz in turbo mode.
    This could be checked if the speed of the RAM is the default value (which would be 1066 or 1333 Mhz)
    in the BIOS.
    The mini dumps have nothing conclusive. That there is a memory management problem. They suggest a possible driver conflict but cannot identify the driver.
    A possible such driver comes with Daemon tools. If you have Daemon tools installed, then
    the link below shows how to get rid of the driver.

    BSOD in the use of the high memory, fltmgr.sys - Windows 7-Forums

    A msinfo32 report is usually suggested to be included with the mini dump and can
    reveal something more.

    .

  • How to solve the problem with slow import mxf files exported from first cc?

    Hello!

    I'm working on the first update to 7.2, on 64 bit, windows 7, and I have a problem with the import of the MXF op1a (IMX 30 PAL) files that I exported from first.

    MXF Import blocks especially first, but when he's not, it takes a long time to import (10-15 min).

    I tried editing ContributeQ but again, it hangs / takes a long time and I can see only a black screen.

    I installed a new copy of windows on this computer with everything clean, but it doesn't seem to work.

    Is there a software patch or way to go around for this problem?

    Whenever you have trouble with this, reduce the number of influences of others on your system.  In this case, delete TotalCode and see if it behaves better.  If it does not remove the device from BlackMagic and uninstall the drivers.  If one of these steps will improve performance, check with the third-party manufacturers.  There may be a setting or an update is necessary so that your system works correctly.

  • How to solve the problem with the Gmail password that worked before and works online?

    1 thunderbird worked very well with my Gmail account for months, then was unable to send a message, but can still receive messages.
    2. I asked me to re-enter my password and it has not fixed the problem.
    3. I went to Gmail online and connected to verify that my password has not changed. Success.
    4. I have reset password in Thunderbird, but still could not send test message to myself.
    5. I deleted the account in Thunderbird. I then added a different Gmail acct that wasn't in Tbird. Success. Then I sent the test email, success.
    6 then I added the original Gmail acct, failure! He finds the correct settings automatically, but when he tried to check the password, it failed. I repeated to enter the password several times but always failed.
    7 WIN7 64 bit HP, Tbird 24.4.0
    8. all other AOL accounts work fine on Tbird.

    Authentication using two-factor with this account? and ask for passwords? as it seems!

  • How to solve the problem with sending SMS in Yahoo Messenger?

    Original title: maintenance cleaning disk yahoo im window doesn't translate InfoBar

    When on yahoo messenger, you can type in the box at the bottom, but when you send is just a white in the main window...

    Hello

    Given that the problem is specific to Yahoo Messenger, I suggest you contact the manufacturer for support.

    http://IO.help.Yahoo.com/contact/index?locale=en_CA&y=PROD_MSNG&page=contact

    Kind regards.

  • How to solve the problem with AdbePM.dll?

    Do not click on open pictures directly to Photoshop because of a missing AdPM.dll file.

    How can I restore it?

    Thank you.

    Have you tried to uninstall and reinstall?

    Uninstall... to run vacuuming... Restart your computer... Reinstall

    -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

    -using the vacuuming after uninstalling and before reinstalling will usually help

    -http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  • Problem with Windows install. Error 1723. ___

    Hello. I am running windows 7, try to install the latest version of Java. Failed to install, I get the following error message:

    Error 1723. There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact you staff support or package of the seller.
    I have already searched the internet for a solution and have tried a number of things that have been proposed, including:
    -try "offline" installation of Java.
    -cleaning the registry with CCleaner.
    -try to uninstall any failure installs with Windows Installer Clean Up-> no installation of Java have been found.
    None of these suggested solutions have solved my problem.

    Hello

    ·        When you did a SFC scan, do you have any system messages from violations of integrity?

    ·        Were you able to install and uninstall all programs on the system before?

    Installation can be terminated prematurely, or there may be a fatal error during installation. Windows Installer error 1723 occurs because Windows Installer cannot start the source files for the configuration of the software application you are trying to install. These files may be missing or damaged. In general, the original MSI installation files will be cached in the ' C: winntInstaller directory before installation begins. Inappropriate caching of a file MSI is main causes of errors, too.

    Try the following to correct the setup of Windows 1723 error.

    a. to correct this error, you must ensure that you have the latest version of InstallShield. If this isn't the case, then update to correct the error.

    b. If the installation cannot find the necessary files, try using the search function of the window to locate the files and specify the location for the installation process.

    c. you must log on as an administrator before installing.

    d. If you install on a network, make sure you have full access to the network location where the installation is running.

    e. try the reinstatement of Windows Installer.

    I suggest you to check the below link.

    Error 1723. There is a problem with this Windows package install.

    http://www.Java.com/en/download/help/error_1723.XML

    ·        The place where you try to download java?

    I suggest you to download java from the link below and then checks to see if you are able to install it on the system or not.

    http://www.Java.com/en/

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How to fix the problem with windows to format external drive and lightroom

    I'm working on an imac with lightroom 4. I've already imported photos from an external drive that is formatted for windows. I made some changes using LR develop module but I would also use my NIK plugins. Lightroom does not allow me to export to the Nik plugins because the files are on a windows format. How can I copy/paste the photos on a mac to the disc format while keeping my changes? In addition, how re - import these files in the mac player in LR? At the present time, these files are shaded on b/c they are already in LR on the windows disc. Help?

    TUxera is a utility that gets around this limitation of Mac.

  • How to solve the problem with the blocking of my hotmail account?

    I can not connect to hotmail. He say, I've been blocked, wants me to put in info in order to restore, but nothing happens. It also allowed me to change my password, but can't always get to my ACCT. I give the e-mail address of my spouse for a response from you.

    You could start with the Windows Live Solution Center, take a look at:

    http://windowslivehelp.com/solution.aspx?SolutionID=f172cbee-3c73-4506-8a1d-4e6e82adb846

  • How to solve the problem with StudioMX

    I used Dreamweaver version StudioMX for centuries. Now, because of the change of PC, I need to install it again. However, my license code is not functional. Probably because the software was developed long ago. I certainly need and our University is not so much that a new version is available.  Now it only works for 30 days. What then? Any answers/suggestions? -Kalle R, M.D. master of conferences at the University.

    Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

    Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME

    Don't forget to stay signed with your Adobe ID before accessing the link below

    Serial number and activation support (non - CC)

    http://helpx.Adobe.com/x-productkb/global/Service1.html

    In ADDITION, possible ideas for before the Win10 and Win10

    -Do run as Administrator http://forums.adobe.com/thread/969395 [says again and also to Adobe all emissions] will sometimes fix errors "bizarre."

    Win10 - Windows 10 Forums

  • It is possible to solve the problem with this update?

    I have an iPad Air bricks after setting date from 1970. Solutions-battery DFU & drain do not work for me...

    Make a Genius Bar appointment. The article you have linked, mentions the software update will prevent it from taking place, but if you already have the number, you must contact Apple technical support. -AJ

Maybe you are looking for