How to run the script in ins CMCLEAN?

Similar Questions

• How to run the script with parameters such as alarm action .ps1

  Hello

  I know not how to configure alarms, I know that I can point to monitor cluster for changes (via the GUI), but... I have different groups and I would like to set an alarm by vCenter which monitors cluster for changes. Let's call it "RefreshCapacityInfoOnExternalDB".

  So, lets just say. I would like to run my script whenever a virtual computer is added, Reconfigured or ESX host are removed, added in a Cluster. The alarm would launch the .ps1 script written in turn the ability to update external db cluster info.

  Shortly said: ability to cluster values are changed

  What I need is this: run the script-> CapacityInfoRefresher.ps1 < Cluster_name_where_ReconfigEventsTookPlace >

  I guess that, first I need an environment variable (if it exists) that can be used as a parameter for the < Cluster_name_where_ReconfigEventsTookPlace > placeholder script. Right?

  Chapter 16 of the book of LucD & Friends "PowerCli reference" mentions some environment vars but I'm stuck. Anyone using these options?

  THX

  A.S.

  You can set your alarm on the node above in your vCenter tree, this way it will be active for all collections in the vCenter.

  These alarm environment variables are automatically available for your alarm script when it is triggered.

  These environment variables, you will be able to determine to which cluster the alarm was pulled.

  So I don't think that you need to pass this information as a parameter to the script.

  Perrhaps you could share what exactly alarm you want to set and what looks like the script which should trigger alarm.

  And Yes, I use these environment variables in scripts of alarm

• How to run the script to EEM/TCL file

  Hello world

  I need to run the EEM script found in this link

  https://supportforums.Cisco.com/document/75806/interface-input-queue-Mon...

  Can you please point me to a HOWTO to download the file and run it under an interface?

  Thank you

  Federico

  Here is the manual how to run scripts tcl file - http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ios_tcl/configuration/1...

  In short - you download the script to switch via tftp and the tcl implementation with command tclsh interpreter. Then run the command source source

• Run the Script using hotkey in InDesign

  Hello

  How to run the script in InDesign using the shortcut key.  Can someone help me?

  Thanks in advance,

  Sudha K

  

• How to run a script for all the images in a folder?

  How to run a script for all the images in a folder?

  You can assign your script to an action, then use processor by batch or image with the option apply to all subfolders.

• How to run a script in the idle task

  Hi all

  Successfully, I wrote and performed a routine of idle task that periodically executes a simple method. now, I need to add a feature to this method so that it performs a simple javascript.

  Here is my code:

  ...

  UInt32 myTestIdleTask::RunTask)
  UInt32 appFlags, IdleTimer * timeCheck) {}
  If (appFlags &)
  (IIdleTaskMgr::kMouseTracking
  | IIdleTaskMgr::kUserActive
  | IIdleTaskMgr::kInBackground
  | IIdleTaskMgr::kMenuUp))
  {
  Return kOnFlagChange;
  }

  This-> runTestScript();

  Return kmyTestFvExecInterval;
  }

  
  

  void myTestIdleTask::runTestScript() {}

  This is the test script
  

  PMString myTestScript ("app.activeDocument.exportFile (ExportFormat.pdfType, File(\"/Users/testuser/testing.pdf\"),false);" ');

  I think that I should call CScriptRunner::RunScript()
  somewhere here but without success
  

  }

  Any help on how to run the Javascript code for myTestScript from the runTestScript() method?

  Thanks in advance,

  Halin

  Already, I solved my problem by using "IExtendScriptUtils".

  For those who are interested, here is my solution:

  void myTestIdleTask::runTestScript() {}

  This is the test script

  PMString myTestScript ("app.activeDocument.exportFile (ExportFormat.pdfType, File(\"/Users/testuser/testing.pdf\"),false);" ');

  PMString engineName ("myengine");

  Int32 errorCode is Utils()-> RunScriptInEngine (engineName, myTestScript);.

  }

  Good luck.

  halin

• "Cannot run the script at line 1. File or folder does not exist. »

  Whenever I have start AfterEffects, I get an error as he is looking to find my recent projects.  The error is as follows: "unable to run the script at line 1. File or folder does not exist. "I haven't changed the location in one of my project files.  It's the same external drives that I use for months.  When I click on OK the same window opens several times and then finally the historic window opens completely blank and empty.  I am able to reopen projects however since the RECENT PROJECTS drop in the top bar.  It is a very strange and disturbing behavior.  In addition, I always use 13.7.2 because when I go to update it is impossible to connect and gives me this error.  I sat with Adobe support for an hour today, and we couldn't understand.  As I am in the middle of major projects, I decided to not update, but this error at startup is very worrying.  Someone has an idea of what could go wrong or how I can fix this?

  Thank you very much for your time.

  -Fredo

  

  Ok!  Just got a response and an Adobe technical support solution.  The problem is that there is a problem with these versions of sequels (and I found the same problem in first to my horror this morning as well!) and the last couple Mac OSs.  The solution is to close the window "library".  It is then normally.  Apparently they fixed in the last update, but I found the same problem on my second computer, which has been updated.  Anyway, if anyone has this problem, close your cc library window.  Voila.

• Run the script file from a virtual machine

  Hello

  I have a script (c:\script.ps1) I want to run on a virtual machine. Can someone tell me how to do?

  When I want to run the single command on vm I follow these steps:

  > > $cred = get-Credential

  > > Invoke-VMScript - win1 VM - GuestCredential $cred - ScriptText "dir".

  but I don't know how to put the script in a variable so that I can place it after the parameter - ScriptText.

  PS Script is not on the virtual machine, it's on the computer I have installed PowerCLI.

  LucD thanks for help

  I managed to do this way:

  $script = Get-Content - Path C:\script.ps1 | Out-string

  Invoke-VMScript - win1 VM - GuestCredential $cred - $script ScriptText

  without out-String I received the error "failed to convert System.Object [] to the System.String type.

• How to run the Extendscript .bat file?

  I have a file with some instructions .bat and I want that it runs from Extendscript.

  How to run the Extendscript .bat file?

  I tried execute(); order and it seems that .bat ran but no result, but when I double click on the .bat file all worksout very well.

  How used runtime.exec () extend the script?

  Can I communicate with Java JDK thru ExtendScript and run commands such as runtime.exec ()?

  can someone please?

  You can do it like this:

  var batFile = new File("C:\\path\\to\\my\\batfile.bat");
  batFile.execute();
  

  Note that this will only work if your system is configured in such a way that by double-clicking the .bat file runs it in reality.

  You can also use

  system.callSystem()
  

  but note that this is only available in AE.

• Running the script

  Is there a documentation of step by step on how to run it? I looked at everything, and it seems that you should already have some understanding to execute. I have several .ps1 scripts, I run my server virtual center with vcli without any problem, but I don't know how to run the this.pl file. I just errors that .pl is not an extension of known file, etc. I'm sure there is an obvious answer for most of you, but it seems to be stuck here. (my computer run this PowerShell, powercli, etc.) Thank you

  Once I have re-installed vcli it worked.

• You will need to run the script for some ESX hosts.

  Dear team,

  I m connected to 4 esx host, but I want to run the script only 2 esx host asking you to help me how to do?

  concerning

  Mr. VMware

  You could start the script with the cmdlet Get-VMhost to select only the two hosts that you want to output to. For example:

  Get-VMHost host1, host2. Get - VM

  Displays only the virtual machine running on host1 and host2.

• How to create the script to compile procedure files in oracle - urgent deadline...

  How to create the script to compile procedure files in oracle.    about to go live and have much .prc pkg in a directory usr/tmp/ar... Po... human resources etc. need to create a script to compile all the files in the folder, then do not open all necessary .prc suggestions on how to do it.   Thank you Tom.

  (1) an urgent need, ASAP,... are words that do not in a forum of volunteer. We are here to help if you need it now, for free, open a SR.

  (2) oracle procedures are not files.

  (3) I think you are trying to run operating system packages, no Oracle procedure. right?

• Run the script on the ESX host

  Newb question...

  How to run a script on an ESX 4.0 host?

  I received a script in the form of a *.sh file I need to run on my host.  I have vCenter works... I can do through this?

  You need SSH in the host. Under tab VI client users click "Add a user" and make sure that check "shell to grant access.

  Then download a SSH client and install it on your desktop (installed by default on Linux/MaxOSX), a good Windows free one called PuTTY.

  http://www.chiark.greenend.org.uk/~sgtatham/PuTTY

  Use the username and password you created to open a session on the server. then type 'su-' (i.e. LESS known www.phdvirtual.com

• Run the Script on the Open Document event

  OK so I know about the spectacle of afterOpen and I think I understand how to use it, however, I do not understand how to open to a specific document.

  I don't want this script runs on all the documents that I opened, I would like to incorporate into a document and then run it whenever I open this document. Is this possible?

  Maybe run the script in the script label?

  Or I just put a script in the start Panel, and then create a session script that checks the name of each document open and then runs the script, if I have a match?

  Thank you

  As you chart put it in the startup scripts folder

  //startup script
  #targetengine "session"
  main();
  function main(){
      var myEventListener = app.eventListeners.add("afterOpen", excuteScriptLabel);
  }
  
  function excuteScriptLabel(myEvent){
            //The parent of the event is the document.
            var myDocument = myEvent.parent;
      if (myDocument.constructor.name == "Document") {
          if (myDocument.label != "")
              app.doScript(myDocument.label, ScriptLanguage.javascript);
      }
  }
  

  Then try this line on a document and save it, and then open the same file and a few others, you will notice that this code only run on this document:

  app.activeDocument.label = "alert (\"Yes\");";
  

• Create the alarm to run the script when migrating a VM

  Very well, I create an alarm that triggers a script that runs whenever a virtual computer is migrated automatically in a DRS cluster. I see in the API documentation that I could use the EventAlarmExpression - & gt; new (eventType = & gt; "VmMigratedEvent") (or maybe one of the other dealing with migration eventType). " The problem is that I don't see a way to be able to use a RunScriptAction with an EventAlarmExpression. It seems the only way is to use the RunScriptAction with a StateAlarmExpression. Here is a code snippet showing if all goes well I would do:

  My = $vmName ' name_of_vm;

  My $alarmScript = ' / usr/sbin/vm_migration_update.pl';

  My $vm = Vim::find_entity_view (view_type = & gt; 'VirtualMachine.

  filter = & gt; {name = & gt; $vmName}) ;

  My $alarmMgr = Vim::get_service_content() - & gt; alarmManager;

  my $alarm = Vim::get_view (mo_ref = & gt; $alarmMgr);

  My $alarmExpr = EventAlarmExpression - & gt; new (eventType = & gt; (' VmMigratedEvent');

  My $alarmAction = RunScriptAction - & gt; (new)

  script = & gt; $alarmScript

  );

  My $alarmTrigger = AlarmTriggeringAction - & gt; (new)

  action = & gt; $alarmAction,

  1. red2yellow = & gt; 1,

  1. green2yellow = & gt; 0,

  1. yellow2red = & gt; 0,

  1. yellow2green = & gt; 0

  );

  My $alarmSpec = AlarmSpec - & gt; (new)

  name = & gt; "Migrated VM."

  Description = & gt; 'Trigger to run the script then from VM migration',

  activated = & gt; 1,

  expression = & gt; $alarmExpr,

  action = & gt; $alarmTrigger,

  );

  My $newAlarm = $alarm - & gt; CreateAlarm (entity = & gt; $vm, spec = & gt; $alarmSpec);

  The problem is with the AlarmTriggeringAction. There is nothing to test with an EventAlarmExpression (i.e. the EventAlarmExpression does not provide States of red/yellow/green). So the question is, does anyone know how to set up an alarm that will run a script when an EventAlarmExpression is used. Specifically, I'd like to be able to run a script each time a virtual machine is migrated automatically in a DRS cluster. Pointers would be greatly appreciated.

  David

  Try this:

  C:\Windows\system32\cmd.exe C:\VMware\VMwareCLI\scripts\call_migrate_perl.cmd

  In fact, you can just run scripts perl like this:

  C:\Perl\perl.exe C:\scripts\migrate.pl

  Note: the commands are executed under 'System', not the user of the connection currently. If you don't see it visually. You can take a look at using Windows Task Manager if necessary.

  In addition, you can have parameters of placeholder that will be replaced before the "scripts" are actually executed.

  Good luck!

  Steve JIN, VMware engineering

  Creator of VI Java API: http://vijava.sf.net/