How to run the Extendscript .bat file?

Similar Questions

• Cannot run the setenv.bat file

  Hello guys,.
  
  I started working on OracleAS integration B2B recently. I finished installing and I started to work on EDI X 12 transaction Internet scenario, I finished the whole process in the Oracle B2B user interface for this scenario, but I'm not able to run the setenv.bat file located in the
  ORACLE_HOME\ip\install way, when I'm clicking the setenv.bat file its does not, and I can't seem to set the classpath.
  Because of this problem, I am unable to go further, because I can't run the files deq.bat and enq.bat without running the setenv.bat file, please can anyone give me the solution for this problem.
  
  Thank you
  
  Sunny

  The solution is very simple: do not close the command prompt, but the second script from the prompt in command as well as the first! This is how it is intended to be used.

  If for any reason, you need to run a single script, you can modify to call the script setenv.bat as the first step:

  call %ORACLE_HOME%\ip\install\setenv.bat

  Or alternatively, you can change your environment and set the necessary properties manually so that they persist. However, I would still strongly advice against a double click on the scripts. You want to run it from a command prompt, to keep the command prompt when the script is done, otherwise you may miss important error messages.

• How to run the rman output files, which are more days of retention

  I use for my rman backup tasks.

  I have format my output files of rman to a specific path, instead of the fast recovery area.

  Also, I spend below command in RMAN

  RMAN > CONFIGURE RETENTION POLICY to RECOVERY OF 7-DAY WINDOW;

  And the "control_file_record_keep_time" parameter is also set to 7.

  I've been running rman for 8 days. Everything seems good. But I find several rman output files are more than 7 days.

  So, I just want to know how to handle the rman output, which is longer than 7 days files?

  In fact, I assumed that these older files should be obsolete files, but rman is not to declare that they are obsolete.

  So how do now?

  user8710670 wrote:

  I use for my rman backup tasks.

  I have format my output files of rman to a specific path, instead of the fast recovery area.

  Also, I spend below command in RMAN

  RMAN > CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;

  And the "control_file_record_keep_time" parameter is also set to 7.

  I've been running rman for 8 days. Everything seems good. But I find several rman output files are more than 7 days.

  So, I just want to know how to handle the rman output, which is longer than 7 days files?

  In fact, I assumed that these older files should be obsolete files, but rman is not to declare that they are obsolete.

  So how do now?

  Windows 7 day average recovery rman will protect everything necessary for the recovery to any point in time in the last 7 days.  In fact, in the last 604800 seconds.  The same will mean that he need the files OLDER than that.  Simply because a backupset is older that your recovery window does NOT as yet, it is obsolete.  Any recovery begins with the last FULL or INCREMENTAL backup ZERO before the recovery point.  And it does not matter how old the backup is, it will be obsolete.  Suppose you take a level 0 backup, 1 January and for the rest of the year taking nothing but level 1 and backup archivelog.  31 December than and only the full backup will still not be obsolete, even though he is a year old.

  ============================================================================

  removal of the obsolescence of RMAN

  Day 1 - level 0

  Day 2 - level 1

  Day 3 - level 1

  Day 4 - level 1

  Day 5 - level 1

  Day 6 - level 1

  Day 7 - level 1

  Day 8 - level 0

  Day 9 - level 1

  Day 10 - level 1

  Day 11 - level 1

  Day 12 - level 1

  Day 13 - level 1

  Day 14 - level 1

  On day 14, your window of 7 days is up to date 7.  A recovery to date must begin by restoring the backup of level 0 of the day 1. So it may be outdated.  Some level 1 between 1 and 6 days backups might be obsolete, depending on if they are incremental or cumulative, and it also happens with archivelogs.

  If you have access to MOS, you can review the notes 462978.1 and 463875.1.

  ============================================================================

• How do I trouble or repair cmd.exe on Win XP? For some strange reason the extension bat files does not work

  Hi all

  I have four PC all currently running Win XP Professional Service pack 3. Unfortunately only two of them will run the extension bat files when I double-click the file or run the file at the cmd prompt. The other two for some strange reason will not. When I double-click on them the cmd window opens quickly and then stops as quickly. There, someone knows what's the problem?

  I tried to do my research and on another forum, someone suggested to reinstall or repair the cmd. Is this possible? If so, how? What is the right course of action at all?

  Please if someone could help me to solve this crisis, I would be extremely grateful. Without these bat running files, I can't render my farm runs correctly. Thank you.

  Too bad. Figured it out. Thanks anyway.

• [CS4:JS] How to run the file ".sh" via Javascript

  Dear all,

  How to run the file ".sh" through Adobe InDesign Javascript, I used the code below:

  //================== Code =============================//

  var myFile = File("xxx/xxx/xxx/Test.sh");

  var Exec = "sh" + "" + "\""+myFile+"\;"

  Leader (exec). Execute();

  //================== End =========================//

  codes above does not work, I checked before without the "sh" in addition, it does not work.

  Please can someone give me the solutions and the suggestion, and I'd appreciate it.

  Thanks and greetings

  SudhaN T.R.Harihara.,.

  Have your IDMLExportparse.sh file runs permission set?

  If you open Terminal.app and type

  /Applications/MacXinPro/IDMLExportparse.sh

  It work? Or do you need to run "sh"? If so, either adjust the

  permissions with

  chmod a + x /Applications/MacXinPro/IDMLExportparse.sh

  or modify the JavaScript code for:

  shell("sh "+myFile);
  

• How to run the VI developed in labVIEW 2011 in its previous versions

  Hi all

  I am currently using LabVIEW 2011 in my PC at home.

  But, all my school's computers are installed with LabVIEW 2010 and 2010 SP1.

  How to run the VI developed in LabVIEW 2011 in its previous versions?

  Is there any conveter why?

  Concerning

  Prasanth T

  Open the VI in LabVIEW 2011 and use the file menu option, save for the previous Version.

• How to block the registration of files with a windows xp-specific extension

  How to block the registration of files in windows xp with a specific extension, example the user cannot save a file with the extension exe or mp3 or another, as management on the filtering of files, windows 2003 server, I can't find the steps for the blocking process I mean in windows xp prof

  Windows cannot do natively.  A file name is simply a file name and you can not prevent the registration of a file based on its extension.

  You can change file associations, such as a double click on a file with a particular extension will not automatically launch an application given, however, but that's not what you asked.
  You may also schedule a program to run from time to time which will erase all files with a given as well.  but until this program is executed, such a file might exist on your disk.

  HTH,
  JW

• I can't find the fix_svchost.bat file update. The svchost.exe process is spiking the CPU at 100% after the computer crashes.

  Original title: I can't find the fix_svchost.bat file update.

  I'm in you process of having my computer running faster. The svchost.exe process takes 100% of cpu memory and computer dthe freezes. A friend of mine told me a method to solve the problem, but I can't find the fix_svchost.bat update. I went to microsoft update center and don't find any results at all, and I don't know another place to look for. I think that the update does not even exist.

  I could send you a fix_svchost.bat file, but I don't think it's the starting point.

  What you need to do is run a few respectable scans for malware first, and then see if any of you are your svchost.exe process is still badly behave.

  Behind each of the svchost.exe process that see you in the Manager of tasks can be one or more process of XP you have to be running, but malware is KNOWN to imitate or hide behind a svchost.exe process, so you won't be able to see in Manager tasks.  You have to outsmart it.

  First yo should make a reasonable effort to eliminate malware, and then start troubleshooting - not the other way around.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  These comprehensive analyses can take some time, but you really need to run.  SAS will probably be just a bunch of Internet tracking cookies, but you can remove them.  Once you have done at least a full analysis, you can do quick scans in the future to save time and save the analyses complete for when you have more time or are really suspicious of an infection of the system.

  They can be uninstalled later if you wish.

  In 1985, there were 11 known computer viruses.  Today, there are over 70,000 and new threats are detected every day.  Always update your virus definitions before running a scan.

• How to upgrade the already encrypted files on the USB HDD with new XP Recovery certificate

  I backed up the files encrypted in My Documents on a USB drive on which these files are also encrypted state. My computer crashed so I reinstalled the operating system. I wanted to send records encrypted USB HD to my computer or tried to copy projecteurDu and paste them into My Documents. I could not do this because I got "an error occurred in the application...". access privilegesDo i., access is denied. "I created a new recovery certificate and put in place a recovery agent. From there how I update the previously encrypted files on th USB HDD with the new recovery certificate? I'd appreciate a step by step procedure. Can I select the USB drive in the command line and run cipher/u on this drive or make the command/u of encryption on the computer without connecting to the USB HDD

  Sorry to say that my bet is that you never gain access to these files again.

  When you created the files encrypted, Windows creates a key for decryption to access these files and stored, encrypted in your certificate store.  When your system crashed, the decryption key has crashed with it.  Without this key, you will never have access to your encrypted files.  If you have recovered from a backup image-style, you should be able to access these files.  If you've recovered by installing Windows from the installation disc, then you have created a new and different installation with different Secure ID (SID) and a certificate store empty.  A recovery agent will only retrieve encrypted files that were created after that recovery agent was in place - as a new certificate.  What you really need to do, it's your old certificate to restore the backup that you created when you started using EFS.  The following article is mandatory for anyone using the EFS file system.  Special attention to the paragraph entitled "why you should back up your certificates.

  "Best Practices for encrypting file system"
   <>http://support.Microsoft.com/kb/223316 >

  If you do not have a return to the top of your certificate, then things look dark.  There is a program called "AEFSDR' whose 'professional' version comes through what has not been overwritten on your hard drive in search of remains of certificates that could be delivered together to recover.

  Good luck
  HTH,
  JW

• How to clear the Windows.edb file in Windows 8

  DISPLAY TO THE CLIENT ACCOUNT *.

  The customer has a PC under Windows 8, and he wondered how to remove the Windows.edb file. He recorded 60 GB of information. Is it possible to have the option of Windows search and have this file shrunk down to the size? Is it possible to empty this folder? Anyone have any suggestions on how to deal with this problem?

  Please respond with more information.

  Thank you very much for the help!

  I just had this problem myself, with a clue consuming 107/278 GiB!

  Here's the trick:
  (1) search for "Indexing Options" (under "settings"). Open it.
  (2) search for 'services' (or run "services.msc") and find "Windows Search". Stop the service.
  (3) remove the Windows.edb file
  4) click on "Change" in the Panel "Indexing Options" already open, then click on "Erase and rebuild" for the index. You can also specify another drive to store the index on.
  Hope that helps.

• How to run the repository creation utility (11.1.1.3.3)

  Hi experts, I downloaded utility creation (11.1.1.3.3) at oracle.com repository as I was told to run it before installing Oracle Business Intelligence, v. 11.1.1.3.0, I already unzipped the UCR, my problem is I do not know where and what run.i I ask the name of the file to be executed, the location of this file because there are so many issues after having unpacked the downloaded file. Finally, how to run the file (for example by double-clicking). Thank you

  Visit this link,

  http://obiee101.blogspot.com/2010/08/obiee11g-installation-on-32-bits-XP-Pro.html

  He noted the location of the controls on the remote file, double click will start the process.

  Thank you
  Vino

• Lean how to run the stop code when the highest level VI ends

  Hi people.

  I am a newbie of LV with 30 years of experience in embedded SW engineering.  I searched for how to run the stop code when a VI of highest level ends.  I found many examples, but they are horribly complicated.  A little birdie told me that such a model of simple design should not be so compilicated.

  My application is an application of high tension control to disable all HV checkpoints when the SW ends.  My VI code is running in a while loop with a stop button that leads out of the loop.  I can easily accomplish my requirement by programming with a sequence of plate that runs after the end of the main loop.  The technique of flat sequence does not work when the user clicks the Cancel button in the toolbar of façade, more than that market when the user clicks the close button of the application (X button) when you run the exe application.

  Can someone tell me please a simple technique, the code example that can show me a lean and elegant way to accomplish my task?  It doesn't have to be an obvious solution (for example a stop induced watchdog seems simple enough).

  Thank you - John Speth

  1. place this code in a VI:

  (also attached)

  Calling code in your VI of highest level like this:

  

• How to restore the system recovery files to their original location? (HP Pavilion p6540F desktop computer)

  I have a desktop HP Pavilion P6540F under Windows 7 Home Premium. A few days ago there was a problem with windows that virtually wiped out my OS and I had to restore my computer to factory settings. Before restoring my computer I backed up all my files on a disk. After Reinstalling windows, I placed the drive with all my files recovery on it in my computer and running the recovery .exe file that has started downloading my files. All of this worked perfectly well but the problem is that these files only stored in a file on my desktop and has not been restored to its original location. Is it possible to get these files to restore to the correct locations on my computer without having to manually, drag the files to their old location? Honestly, I don't know where many of these files were located before the restoration and many items such as preferences for certain programs are impossible for me to move. Thanks for the help.

  The backup that is used to recover only restores the files in a folder, leaving the owner to move. I agree, not the application of backup more useful, but better than nothing I guess.

• How to remove the recovery disc files D?

  Original title: drive D

  How to remove the recovery disc files D?

  Hello
  
  It is not recommended to delete the files in the recovery partition.  Recovery partition contains the Windows information to retrieve the computer crashing. I would ask you to contact the manufacturer of the computer on it.
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• What is tdrc.tdrcfacade and how to run the installation wizard?

  What is tdrc.tdrcfacade and how to run the installation wizard?  My desktop creative cloud application does not open properly... it is just a blank window.

  Much obliged,

  Angiecrichards@gmail.com

  ! !

  Are Angie, you a blank white screen? What version of OS are you using?

  Here's what you can try:

  1. Blank white screen. Sign in | Creative cloud Packer
  2. New application Cloud Creative unusable: it is empty!
  3. Creative cloud Packager white screen after the Adobe ID Login
  4. Re: screen creative black cloud

  Waiting for your response.