How to run the wrap utility

Similar Questions

• How to run the chkdsk utility

  I need to know how to run a chkdsk utility laptop always tells me that I have a corupt file and to run, but I can't understand how do

  There is a link in the post above say you how to operate!

  Your computer does not seem to allow links to work, I'll post it for you:

  1. Click Startand then click run.
  2. In Open, type cmd and then press ENTER.
  1. Use one of the following procedures:
  • To run Chkdsk in read-only, at the command prompt, type chkdsk, and then press ENTER.
  • To repair errors without scanning the volume for bad sectors, at the command prompt, type chkdsk/f and press ENTER.

    Note If one or more files on the hard disk are open, you will receive the following message is displayed:

    Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts? (Y/N)

    Type Y, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

  • To repair errors, locate bad sectors, and recover readable information, at the command prompt, type chkdsk/r, and press ENTER.

    Note If one or more files on the hard disk are open, you will receive the following message is displayed:

    Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts? (Y/N)

    Type Y, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

  Free Support Tools

• How to run the repository creation utility (11.1.1.3.3)

  Hi experts, I downloaded utility creation (11.1.1.3.3) at oracle.com repository as I was told to run it before installing Oracle Business Intelligence, v. 11.1.1.3.0, I already unzipped the UCR, my problem is I do not know where and what run.i I ask the name of the file to be executed, the location of this file because there are so many issues after having unpacked the downloaded file. Finally, how to run the file (for example by double-clicking). Thank you

  Visit this link,

  http://obiee101.blogspot.com/2010/08/obiee11g-installation-on-32-bits-XP-Pro.html

  He noted the location of the controls on the remote file, double click will start the process.

  Thank you
  Vino

• This is the message I get: "the file or directory C:\Documents and Settings\ALLUSE~1\APPLIC~1\Norton\{0C55C~1\NIS_17~1.127\IRON is damaged and unreadable. Please run the chkdsk utility. »

  Original title: this is the message I get:

  "The file or directory C:\Documents and Settings\ALLUSE~1\APPLIC~1\Norton\{0C55C~1\NIS_17~1.127\IRON is damaged and unreadable.  Please run the chkdsk utility. "When I type chkdsk/f to the command prompt it tells me that it cannot run while windows is open and asks if I want it to work when I reboot.  I say Yes and restart and nothing happens.  What I am doing wrong?

  Hello

  1. when exactly you get this error message?
  2. don't you make changes on the computer before this problem?

  Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

• House file corrupted XP - run the chkdsk utility

  I am running windows xp home and I have a pop up stating "corrupt Windows file or directory C: is corrupted and readable, run the chkdsk utility." Can you let me know how to solve this problem.

  Scan your disk for errors

• When I opened my computer it always tells me that the file is damaged and unreadable. Please run the Chkdsk utility... I searched my computer for "chkdsk utility" and can't find that. Help, please!

  Can someone help me please, I don't know how to use a computer I was googlen 4 days! When I opened my computer it always tells me that the file is damaged and unreadable. Please run the Chkdsk utility... I searched my computer for "chkdsk utility" and can't find that. Help, please!

  From what you say, you are probably unable to start Windows.

  In this case, when you start the computer, keep tapping the key "F8" on the keyboard until the Advanced menu comes up. Then choose "Safe Mode".

  You will see something like your ordinary, here to enter office "chkdsk volume: /f" (replace with your hard drive volume, in most cases, it's 'c') at the command prompt.

  For reference:

  http://support.Microsoft.com/kb/315265

  Hope this helps

  Post back if necessary

  ____________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Get a Boot Manager error the amount of system memory has changed strike F1 to continue (I have F1 race) or F2 to run the Setup utility

  OT: Sign in

  I got this alert several times before the alert "windows boot manager".

  The amount of system memory has changed (I have more or less?)

  Strike F1 to continue (I have F1 race) or F2 to run the Setup utility

  Dell Dimension 3000 system series

  What should I do? Run the configuration utility

  anconcito

  Irfan:

  1 - no

  2 - Yes

  today after trying 'the memory diagnostic tool' I had the same alert, I clicked on F2, but I did nothing I do not know how

  3 - no

  Hello nacienancon,

  1. don't you make changes to the computer before getting this error?

  2 are you able to boot normally to the desktop when you turn on computer?

  3. have you tried to install any device memory on your computer?

  This problem is related to hardware, I suggest that you contact Dell support to help you better. You can check the links with information below:

  http://support.Dell.com/support/eDOCS/systems/opgx620/en/UG/A02/memory00.htm

  http://support.Dell.com/support/eDOCS/systems/opgx620/en/UG/A02/tools00.htm#wp1114195

  You can follow the technical assistance column for more information.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Lean how to run the stop code when the highest level VI ends

  Hi people.

  I am a newbie of LV with 30 years of experience in embedded SW engineering.  I searched for how to run the stop code when a VI of highest level ends.  I found many examples, but they are horribly complicated.  A little birdie told me that such a model of simple design should not be so compilicated.

  My application is an application of high tension control to disable all HV checkpoints when the SW ends.  My VI code is running in a while loop with a stop button that leads out of the loop.  I can easily accomplish my requirement by programming with a sequence of plate that runs after the end of the main loop.  The technique of flat sequence does not work when the user clicks the Cancel button in the toolbar of façade, more than that market when the user clicks the close button of the application (X button) when you run the exe application.

  Can someone tell me please a simple technique, the code example that can show me a lean and elegant way to accomplish my task?  It doesn't have to be an obvious solution (for example a stop induced watchdog seems simple enough).

  Thank you - John Speth

  1. place this code in a VI:

  (also attached)

  Calling code in your VI of highest level like this:

  

• How to run the VI developed in labVIEW 2011 in its previous versions

  Hi all

  I am currently using LabVIEW 2011 in my PC at home.

  But, all my school's computers are installed with LabVIEW 2010 and 2010 SP1.

  How to run the VI developed in LabVIEW 2011 in its previous versions?

  Is there any conveter why?

  Concerning

  Prasanth T

  Open the VI in LabVIEW 2011 and use the file menu option, save for the previous Version.

• corrupted file? Run the chkdsk utility?

  I am trying to open some of my files and it always tells me that the file is damaged and unreadable. Please run the Chkdsk utility... I searched my computer for "chkdsk utility" and can't find that. Help, please!

  Open my computer, click on the drive (for example, drive C) > properties > Tools tab > difficulty check now, put a check mark automatically file system errors > start.

  If you receive the message that it cannot be done at the moment, you want to plan for the next reboot of the computer, answer Yes.

• Windows - corrupt file message, telling me to run the chkdsk utility - does not work

  This is the message I get: "the file or directory C:\System Volume Information\EfaData\SYMEFA. DB-journal is damaged and unreadable.  Please run the chkdsk utility. "When I type chkdsk/f to the command prompt it tells me that it cannot run while windows is open and asks if I want it to work when I reboot.  I say Yes and restart and nothing happens.  What I am doing wrong?

  This is the message I get: "the file or directory C:\System Volume Information\EfaData\SYMEFA. DB-journal is damaged and unreadable.  Please run the chkdsk utility. "When I type chkdsk/f to the command prompt it tells me that it cannot run while windows is open and asks if I want it to work when I reboot.  I say Yes and restart and nothing happens.  What I am doing wrong?

  Two observations:

  1 symefa seems to be linked to something of Norton/Symantec called "Symantec Extended File Attributes" that seems related to Unix file data, so why it is present on a Windows system is a good question. A position I've seen connects it with Norton Internet Security 2010/2011 and suggests that uninstall NIS using theNorton removal tool will solve the problem.

  2. the System Volume Information folder is a folder 'hidden super' which is not normally accessible.  This is where Windows XP stores the system restore points andother information important to the operating system .  I suspect that Norton/Symantec has decided to take advantage of the great hidden nature of this file in order to hide some of his own thing.  You can access the System Volume information as described herehttp://support.microsoft.com/kb/309531 and delete the offending file.  But I would get rid of NIS first and then delete the file.

• Windows Update keeps just check updates, when I run the fixit utility, I had error, update code error 0 x 80070005(2015-08-01-T-09_15_07P). Help, please.

  Windows Update keeps just check updates, when I run the fixit utility, I had error, update code error 0 x 80070005(2015-08-01-T-09_15_07P).  Help, please.

  The last thing installed on windows update is Windows Update Agent 7.6.7600.320, but it seems to have installed correctly.  I tried a lot of different things in the forums, but nothing works.  Please notify.  Thank you.

  Just found the solution.  I needed to update my version of Internet Explorer.  I used 8 and just updated to 11.  Problem solved.  Updates work again.

• How to run the Extendscript .bat file?

  I have a file with some instructions .bat and I want that it runs from Extendscript.

  How to run the Extendscript .bat file?

  I tried execute(); order and it seems that .bat ran but no result, but when I double click on the .bat file all worksout very well.

  How used runtime.exec () extend the script?

  Can I communicate with Java JDK thru ExtendScript and run commands such as runtime.exec ()?

  can someone please?

  You can do it like this:

  var batFile = new File("C:\\path\\to\\my\\batfile.bat");
  batFile.execute();
  

  Note that this will only work if your system is configured in such a way that by double-clicking the .bat file runs it in reality.

  You can also use

  system.callSystem()
  

  but note that this is only available in AE.

• What is tdrc.tdrcfacade and how to run the installation wizard?

  What is tdrc.tdrcfacade and how to run the installation wizard?  My desktop creative cloud application does not open properly... it is just a blank window.

  Much obliged,

  Angiecrichards@gmail.com

  ! !

  Are Angie, you a blank white screen? What version of OS are you using?

  Here's what you can try:

  1. Blank white screen. Sign in | Creative cloud Packer
  2. New application Cloud Creative unusable: it is empty!
  3. Creative cloud Packager white screen after the Adobe ID Login
  4. Re: screen creative black cloud

  Waiting for your response.

• I downloaded items on my mac and it installed. How to run the program?

  I downloaded items on my mac and it installed. How to run the program.

  Hi David,

  You can simply click on the application to launch from the folder "Applications".