How to see files on a connected USB drive

I bought a

GooDGo (TM) 30 pins for cable Charge USB Host OTG synchronization for iPad adapter 1/2/3 white

which is a connector to a female USB 30 pin, supposedly it allows you to connect the USB storage device to the iPad. That do I do on iOS to see everything that is on the USB card I attach, and what formatting should have the USB adapter to work? I would copy the video content from my Mac to a USB drive and see the videos on my iPad.

You need to trick your iPad by seeing these files as if they were on a camera

Give your video files to a name of 8 characters. This mimicks a camera; s naming protocol. MOV_1244.MP4 example

Place these files in a folder named DCIM

Plug your USB into the USB connector (which may or may not work as number of USB drives also requires a lot of power of the iPad so trigger a warning ' device requires too much power "and the USB will not connect)

Open the photos app (it may or may not open automatically)

The last time I tried this I could not see the names of files, just the files were there. I had to import them into my iPad via the import of the photo app tab.

Then try to look through the photos app, which should trigger the video application to open and you can see your video.

This work is also based on the videos being coded in a way that the iPad is going to play, you have enough space to import their and it still works as it did the last time I tried it a few years ago.

Tags: iPad

Similar Questions

  • I spilled coffee on my Macbook Air and does not illuminate.  How to transfer files from the external hard drive to backup my new Macbook Air?

    I spilled coffee on my Macbook Air and does not illuminate.  How to transfer files from the external hard drive to backup my new Macbook Air?

    If you had a Time Machine backup, you can use the Migration Wizard and connect your new Mac on the external drive which has the Time Machine backup: move your content to a new Mac - Apple Support

  • How to see files saved on my Time Capsule airport? All I see is the name of my hardrive.

    I have recently started using Apple's Time Capsule airport and use it for my Time Machine backups. When I used Time machine in the post with an external hard drive, I can go and see all the backups and individual files, if I needed to. However, with my new Time Capsule airport, I don't see the name of my hard drive. Is there a setting someone to reveal all the files and individual backups?

    If you want to see the files Time Machine has saved on your Mac...

    Click the 'clock' Time machine at the top of the screen of the Mac

    Click on enter Time Machine

    For more information about Time Machine, see this Apple support document: use Time Machine to back up or restore your Mac - Apple supported

    However, if you are asking how to see the files that Time Machine has saved time using the Finder Capsule...

    Click on the Time Capsule icon under the heading Shared in a Finder window

    A disc hard... named 'Data' unless you have changed the name... is displayed on the right

    Double click 'Data' (may asked you the peripheral Time Capsule password when you do this)

    Double-click the sparsebundle bearing the name of your Mac

    A reader named Time Machine backups will appear on the desktop

    Open the drive and go through the levels to find the files you want

  • AAA ipsec vpn clients how to see the history of connection on asdm or asa5510

    Hello all, I would like to know how see history of connection ipsec vpn client users, they authenticate to the local aaa, not in active directory. I am able to see the current logon session. go to monitoring\vpn\vpn statistics\sessions, this shows me sessions underway, but I would like to see for example the connections client vpn for the last month. I did some research and saw the info on aaa Server? I checked that article and does not see what I was looking for.

    It's actually a called (NPS) network policy server microsoft radius server.

    The one I used (ACS 5 and ACS 5) who was just an example.

    You can review the below listed doc

    http://fixingitpro.com/2009/09/08/using-Windows-Server-2008-as-a-RADIUS-server-for-a-Cisco-ASA/

    Jatin kone

    -Does the rate of useful messages-

  • How to set ff to access RoboForm-to-Go connected USB drive?

    I have roboForm-2-Go on the USB drive. Firefox is not see it.

    Have you tried to obtain the support of Roboform?

    I do not use Roboform myself, but I suspect that some sort of add-on might be installed for Firefox to access the data stored on the USB key.

  • Info volume cRIO 9030 to connected USB drive

    I want to display the available disk space for a USB stick plugged into a cRIO-9030 running Linux Realtime (path to the drive is/u).  It is a data logging application that can run for a month with users looking only to see that things are run OK, which they won't if disk space wears.  I tried to get information of Volume and the file Info screws, but both give me nonsense values.  It seems that the Volume of information VI get always reports on the internal disk (/ C) any way I use, I can't see how much space I have on the drive/u.  I plugged into different USB drives with different capacities and free amount, but I still get the same values of the VI, which differ from what MAX brings to the reader/c, but are the closest values for this player than anything else.  I also get a useless value of the VI of information from file/Direcory, which seems to be pointing out how many files is at the root of the drive, not its quality or its free space.  Any suggestions about how to get free space and capacity of a USB key connected to the cRIO?

    bjlv

    Odd. I just tried this on my own target RT Linux (running LVRT 2014) and it seems to work as you expect, where to get the Volume information on ' / u ' returns the available space on the Flash DRIVE and is certainly different from what I get from the internal drive. I see a bug (?) where there's just ' / ' was not taken in charge, what should be on Linux:

    / (or/u) u is actually a symbolic link to where the drive is actually mounted as/media/sda1 or/media/sdc1. (/ u is provided as a convenience of compatibility for porting the applications of Phar Lap or VxWorks.) You get the same result using the actual mounting location? You have access to a shell to the target? If so, that shows "df"?

  • How to transfer files from the old hard drive to a disc new hard, old hard disk has been removed?

    I had a hard disk going bad. Installed a new hard drive and the need to transfer files from the old hard drive. I have an external enclosure for the old hard drive and can connect by usb port.

    The process is fairly simple once you put the old drive in the external box. You can use the usual methods of copy and paste in Windows Explorer. If you copy files, complete folders, you can take a look at RichCopy.

    http://TechNet.Microsoft.com/en-us/magazine/2009.04.UtilitySpotlight.aspx

    Tom Ferguson

  • How to download an application on the USB drive and install it then from there?

    I want to download an app from itunes store from a windows computer, save on the USB drive and then install on my iPad. Please gibve me a hint weather it is possible. Thank you!

    No, it isn't. Live or through iTunes only.

  • How to see files stored in my phone of my 12.04.3 Ubuntu?

    That's what I tried:

       1. In Storage Adjustments i "enable the USB Disk".
       2. Connect The phone via USB cable to my Ubuntu Machine.
       3. Since it is not mounted as an normal USB storage device, i checked the syslog, getting this: http://pastebin.com/U4TikPb5
    

    I can see/dev/sdb appear, but without any partition (I was expecting a partition/dev/sdb1 to appear).

    So, how can I "Download" the files from my phone to my Ubuntu machine?
    Do I need to install a special driver?
    Note:

       1. I have no SD reader in my machine.
       2. My Phone is the "Alcatel One Touch Fire".
    

    Resolved:

    1. Settings -> Storage -> Enable USB storage
    2. Settings -> Storage -> Media storage -> SD Card Storage -> Share using USB
    

    I have only the step 1.

    Thank you.

  • How to prevent file sharing automatic connection with the commune iCloud account?

    I have access to my Mac remotely and always assumed that if I did not check the box pw to remember when asking username/pw I would always need to enter pw to access a remote volume.  This, of course, is the case usually except that I noticed that I have three computers (home, office, mobile) with the same user name and I can connect to the remote volume by simply entering the IP address of the target computer. I receive no request for pw.  This occurs despite the Macs with different user pw. I went to keychain in public services and did ' t see the pw of file sharing, so I guess they are in iCloud keychain.  All 3 Macs have the same username and the same iCloud account, and I have iCloud Keychain selected on all 3 Macs.  Potential problems would be if someone stole my cell phone when I signed to or if someone at work was playing with my computer after hours - they can then access my home computer (or vice versa). If it is stored in iCloud Keychain, so I don't see an obvious way to change.  So I disabled the option of trousseau in iCloud in system preferences on my laptop, not saved in keychain to my Mac and restarted; When I tried to access my home Mac, it helped to connect without my pw but I have noticed that at the top of the window, text says 'connected as [email protected]'- real username omitted here.  Is anyway to avoid this short of having each Mac journal on an account different iCloud (then would lose Sync calendars etc.). Thank you

    What tool do you use to access other Macs?

    Built-in screen sharing?

  • How to see files locked on the servers from a PC

    I need to be able to allow people to see the locks on files on a server, when you move files.  We have an application that runs on the PC, move files on a server.  But it is not in any way claire to see if someone has the file open, or locked in the folder files.  I can see the locks using the Console (MMC) or by connecting directly to the server, but users are unable to perform this operation.  Is there a Windows tool, or a code that I can put together that will solve this problem.  Program in VB6, but who have access to VB.Net 2008 as well.

    Any information on this would be helpful.

    Hello

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

    http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2management/threads

  • How to recover files deleted from a USB dsipositive?

    I deleted some files from my memory stick and I can't get back them, I already checked the trash, but they do not appear. How can I recover these files?

    Below you will find a couple of very good FREE programs for recovering data/files.

    Read their comments and make your choice with which you are happy to work with.

    http://www.SnapFiles.com/get/Recuva.html

    http://www.SnapFiles.com/get/undeleteplus.html

    http://www.SnapFiles.com/get/easusdfr.html

    http://www.SnapFiles.com/get/restoration.html

    http://www.SnapFiles.com/get/restoration.html

    See you soon. Mick Murphy - Microsoft partner

  • How to see files from SD card?

    I've saved some recording file in a directory "file:///store/home/user/record.amr" 4.2.1 JDE application Simulator 8703e/g. But how can I see the actual file through navigation?

    Hi jack_black, go to the home page screen-> Media-> menu explores-> the memory of the device-> Home-> user here you will find your file "record.amr". Thank you best regards &.

  • How to see files on dropbox

    I put several text (.txt) and MS Word (.doc and .docx) on Dropbox files using my PC.  I expected the iPhone to see, but do not see them there.  There are photos and an Excel (.xls) file I put there several days ago, but none of those I was just there.  All the 'old' are visible on the iPhone.  I have changed something in the settings but I can't understand that.

    Someone help me to be able to view the new on my iPhone?

    Thank you.

    I assume you are using the dropbox on the iPhone app.  Have you tried logging on your Dropbox account and logging back in?

    Best,

    GDG

  • Files copied to a USB drive not accessible. Message says sign an administrator

    I have Windows 7.  The files I copied to a USB key are marked part with "no one".  How can I change this to share with everyone.  Or at least the files change I need to access.

    * This message has been moved to the host in the right forum placed *.

    You must enter the property of your records and give you complete access rights - see here:
    https://TechNet.Microsoft.com/en-us/library/cc753659.aspx
    https://msdn.Microsoft.com/en-us/library/bb727008.aspx

Maybe you are looking for