How to set how many months of history remembers Firefox? And how many months of history normally remembers Firefox?
It seems the option to set the number of months (or weeks) to historical data which will be remembered are absent from the history section of the Firefox options. Is there a more indirect way to define how much Firefox history will remember, perhaps to about: config or so?
And incidentally, how history * fact * Firefox remember when I check "remember history"? I can't find where that is specified. I assumed he remembered all the sites I've ever visited, but back in the "Oldest of 6 months" folder in the history, I see that this is not the case. There are only a few dozen sites, whereas it should be hundreds (because I think that I never deleted history for about 2 years).
The current versions of Firefox keep a maximum number of page visited and have no limitation in time for the story.
Firefox automatically determines the number of pages can be kept without affecting performance.
You can see the current value of the maximum value of the read-only pref places.history.expiration.transient_current_max_pages on the topic: config page.
View Marco Bonardo blog on this topic:
You can open the topic: config page via the address bar.
You can accept the warning and click on "I'll be careful" to continue.
Tags: Firefox
Similar Questions
-
Adblock Plus a "permenantly" has changed the appearance of many websites (e.g., google.com). I would like to illustrate this, but I can't find how to add jpg files to this issue.
I have erased the max of Firefox, removed Adblock Plus, reloaded Firefox (v12). Nothing seems to help. The newly installed Firefox "remembers" the same damaged look of Web sites.
How can I recover the 'normal' appearance for Web sites.
If you read the article sites look bad or appear differently than they shouldand follow all the steps, does that help? You can add a screenshot by clicking on the "Add Images:" at the bottom of this page.
-
NB520, NB550D - how to set the volume to the State of sleep and music?
I'm looking for an opportunity to adjust the volume to the State of sleep and the music...
The mere fact that I noticed is that volume depends on the defined level when the computer was working. But how do I change the State of sleep and the music when the comp is off swich?Hi communication,
I checked the user manual and found the following information:
The volume control and mute setting may be different between the Windows mode and the mode of sleep and the music. Before connecting the audio device to the computer, turn down the volume of the audio device. Sound quality can also be different.So based on this information, you will need to adjust the volume in Windows, but it might be a little different. I have not found any information on the change of volume in sleep mode and music.
-
After that a game downloaded, everything on my computer became a great size. How to get back to normal
After that a game downloaded, everything on my computer became a great size. How to get back to normal
Put the screen resolution
http://www.Vistax64.com/tutorials/84291-screen-resolution.htmlRe-set DPI scale -
Hi support team, somehow my mozilla settings have been changed and it became transparent, now how to change, return to normal, because everything is transparent, menus, pages etc.
This could be the same problem other users report as a white or black screen due to an incompatibility between 33 Firefox and some former card/chipset drivers graphic.
Please disable hardware acceleration as a temporary workaround. Instructions step by step in this thread: https://support.mozilla.org/questions/1025438
Does it work?
-
When I sailed text become very small and I don't know how to get back to normal
I don't know what happened. I was moving my mouse on the screen and the text retained decreases, until it is so small you can barely read. I don't know how to go back to normal size.
It would be:
-
When I open the documents to view or print emails or Web sites, they appear on the notebook. However, they have encrypted air (numbers and symbols). How can I get a normal display of documents so I can print them?
What type of files you are trying to view?
If you try to view a file not that plain text, such as a .doc or .rtf file, you must use Wordpad instead.
-
my file were gone in all menu programs start but it still usable in the c drive... Why? and how to get back to normal?...
its empty in all programs but available to the c drive... can someone help me? /The elements of the start menu are a few shortcuts to the files on the C: drive you mention. Done that caused all the elements of Start Menu to disappear? This is sometimes caused by viruses that hide items on the computer, make sure that the computer is virus free, run a Malwarebytes scan on the machine. If the machine is free virus that then I suggest that you do a system restore to a point just before the problem started.
John
-
I don't know exactly what to do I tried zooming, but it is not look right otherwise how can I return it normal thanks a lot in advance
Using System Restore to go back until the problem occurred.
-
Everything on my screen has tripled in size how it back to the normal size, ps I tried the right hand winder on cone and it just reduces the font size not all things on the screen itself
Your lowered obtained resolution. This can occur if you are running an older game that uses 800 x 600 for example.
Control Panel > display > settings - change the resolution to correct for your monitor. MS - MVP - Elephant Boy computers - don't panic!
-
my daughter turned my clockeise Office of 90 degrees. How to get back to normal?
My office has been rotated 90 degrees clockeise. How to get back to normal?
Hello
For this problem, you will normally need to press the Ctrl + Alt keys and keys arrow upward
If THE key does not work, try one of the other arrow keys.
Or try right click on an empty part of the desktop > graphics > Rotation.
See you soon.
-
Hoping that this is easy. my standard drawing tools in a given paper seem to be stuck in some kind of preset isometric drawing. someone knows how to get back to 'normal '. my cursor has a cross and an arrow pointing to the left.
disable the perspective grid. Shift + ctrl + I
-
Mr President, whenever I connect to internet on my laptop using idea NET setter dongle it says the bad pool caller and will restart and reboot... Here is the link to dupmp files https://onedrive.live.com/redir?resid=97d7886e9c3f12c6 mini! 104 & authkey =! AEE9bFVyH3uOKNg & ithint = % 2czip
Hello
Bugcheck 1000007E, {ffffffffc0000005, fffff8028a66f060, fffff8801b01b5c8, fffff8801b01ae00}
WARNING: Unable to verify timestamp for ewusbwwan.sys
ERROR: Module load completed but symbols can be loaded for ewusbwwan.sys
Probably caused by: ewusbwwan.sys (ewusbwwan + 2bb5)ewusbwwan.sys dated 31/05/2011 driver Huawei Technologies Co.. Your USB dongle driver
or a device attached to it.BugCheck C2, {b, fffff8029f4f8380, 0, fffff8029f4f8b90}
WARNING: Unable to verify timestamp for c:\windows\system32\drivers\ewusbnet.sys
ERROR: Module load completed but symbols can be loaded for c:\windows\system32\drivers\ewusbnet.sys
Probably caused by: c:\windows\system32\drivers\ewusbnet.sys (ewusbnet + 2353)c:\windows\system32\drivers\ewusbnet.sys Ditto pilot.
This driver update.
Resolution of the blue screen in Windows 8/8.1 errors
http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errorsCheck with HP Support, their drivers and documentation online and ask in their forums
on known problems. Updated BIOS, drivers of low level chipset and on-board major
and drivers of separate devices (see methods of updating driver below).BiosVersion = F.03
BiosReleaseDate = 07/09/2012
SystemManufacturer = Hewlett-Packard
SystemProductName = PC HP Pavilion Sleekbook 14
Family = 103C_5335KV G = N L = CON B = HP S = PAV X = Null
SystemVersion = 087F1000003B5900000310100
SystemSKU = C0P30PA #ACJ
BaseBoardManufacturer = Hewlett-Packard
BaseBoardProduct = 18F9
BaseBoardVersion = 82,12HP support/troubleshooting & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/-----------------------------------------------------------------------------------------------------
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
Microsoft drivers - update those without drain in their names. (Also update BIOS and)
low level chipset drivers.)-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now click on
Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
Click on - uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmWindows 8/8.1 - hardware and drivers
http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8Windows 8/8.1 - Why Windows is not find my device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-deviceWindows 8/8.1 - what happens if a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly----------------------------------------------------------------------------------------
Tests of memory intercept all errors such as memory do not match (possible even for sticks
seemingly identical) and when the faster memory is placed in system behind the slower memory.
So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
show a problem.To test the RAM here control - run 4 + hours or so.<-- best="">-->
www.memtest.orgFor the Windows Memory Diagnostic tool.
WinKEY + W - type in the search-> memory box - find the top Memory Diagnostics tool
list - and follow the prompts.How to run the tool in Windows 7 Memory Diagnostics (and 8/8.1) - in Windows 8 8.1
the name is "Windows Memory Diagnostic".
http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html======================================================
After doing ALL the updates you can and if the problem persists, run DriverVerifier.
(Remember to use the methods Windows 8 posted at the top of the first answer above).Driver Verifier can help find some BSOD problems:
Using Driver Verifier to identify issues with Windows drivers for users advanced
http://support.Microsoft.com/kb/244617How to solve the problems of driver in Windows Vista or 7.
http://www.WinVistaClub.com/T79.htmlUsing Driver Verifier
http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspxHow to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngMDriver Verifier
http://www.techsupportforum.com/2110308-POST3.htmlUsing Driver Verifier
http://www.faultwire.com/solutions/using_driver_verifier.phpHow to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngMYou can disable the driver verifier
http://support.Microsoft.com/kb/244617WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable
BlueScreenView lets you know if there is a driver specified in the error message. Also check with
MyEventViewer at the blue screen.If DriverVerifier creates a minidump upload it and post the link here so we can analyze.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
As above. He is not in windows more simply the third update installation and then turns off computer and restart new since the beginning. Tried running safe mode but without success
Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the above does not resolve the problem:
Windows Update Forum:
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
Why are there no camera, microphone or buttons set position remains in my Panel of camera and microphone?
You are on Windows 8 and have your UI reduced to 125%? If so, can you try a different scale for now? See the many controls not visible on Wacom Cintiq complementary 2 improved for general information.
Maybe you are looking for
-
Satellite L650 - recovery leads to deadlock
Hello I have a Satellite L650 my wife here. It has become quite slow and don't respond very well, so my wife asked me to re - install 'as costs of the store. Yes, I did a recovery DVDs! So, I put in, pulled up to the laptop and went through the recov
-
G56 laptop: Admin/power on password
I'm all suddenly do this administrator to enter or power on password. When I enter the wrong password in 3 times, I get this error code: 58097015. Help, please!
-
SD-L622A CD/DVD drive does not read some CD - Satellite L300-144
Reader TOSHIBA SD-L622A.The drive does not boot with Windows XP Service Pack 3 CD, starting with the diagnostic utilities CD (IMHO 2 CD format). Also, these CDs do not see a car even under Windows XP, Vista.My wife bought Toshiba L300, but another ch
-
Smartphones blackBerry RE: Multi language support for storm exist?
Hello I use storm blackberry in Australia, I found it's hard that I can't read some of the e-mails his in other languages... I just wonder blackberry is now language support in other languages? for example, Chinese, Korean and Japanese? Thanks for th
-
SL500 &; view operating system advice
Hi, as I mentioned in my previous msg, I've only had this laptop for 3 weeks or more. When I got the laptop, the screen resolution pre-series meant that icons seemed tiny. The sharpness of the icons has been incredible, but they were too small. So I