How to set my cursor "touch pad" for scrolling?

Similar Questions

• How can I get synaptic touch pad for windows 8?

  my model is like 6 - 1002tx.running windows 8. I need driver for synaptic touch pad

  I use the synaptics driver for win 8 I've downloaded directly from synaptics site and it works well. HP takes it's time to update the synaptics driver.

• How to set sesativity on touch pad

  I bought a laptop from Toshiba... last month the touch pad is so sensitive just brush it sends me where I n '... want to get near the edge of the touch pad and the charms and scroll down comes up... its driving my wife and me crazy will slow our new computer as she said the words that I've never heard? I read some fix but does not work on this Toshiba w/windows 8.1... puzzled

  Hey Rodney,

  You can install and download the Touchpad drivers from the following link and check if that helps.

  http://support.Toshiba.com/support/modelHome?FREETEXT=1200006795

• How to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012

  Hello

  I would like to know how to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012 R2.

  I released some software in my field to a distribution point and I of installation for few of them software restriction policies. But I don't want the default next message below:

  "The system administrator has set policies to prevent this installation." This installation is forbidden by system policy. Contact your system administrator. »

  Instead, I would like to set up a custom message. Please tell us how can I do same by using Group Policy, if not available, what are the alternatives that I can use.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• How to Set up Wi - Fi connection for photosmart c4583

  How to set up a wireless connection for HP Photosmart C4583?

  Will be done, thank you very much Sir,

  banhien wrote:

  Hello

  This can help:

  http://h10032.www1.HP.com/CTG/manual/c01516370.PDF

  You can find more information at the following link:

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=3577781

  Kind regards.

  Duhaem, Riyadh

• I need to know how to set up a hdr-cx230 for timelapse; I'm desperate!

  I need to know how to set up a hdr-cx230 for timelapse; I'm desperate!

  Hello Marta,

  The HDR-CX230 is not able to record the deprivation.

  If my post answered your question, please mark it as "accept as a Solution.

• My button touch pad not scroll more. How do I turn it back on?

  I ran a program of doctor PC through QWEST and now my touch pad button wil no longer scroll. Now, I have to use the arrow keys on my keyboard.

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• How to set the Destination of scanning for your Hp Printer in window - 7

  How to set the scanning for your printer Destination is a common question is asked.  I am including a useful video that will guide you in the process.

  I hope this video helps.

• How to set the zoom settings menu for lecroywaverunner 6050A

  Hello

  I am trying to initialize the zoom settings of a track of the labview on a Lecroy WaveRunner 6050 A fft. I found how to set the parameters of the fft with the manual of the remote control for LeCroy scopes  http://cdn.lecroy.com/files/manuals/wm-rcm-e_rev_d.pdf ) but I have not found how to set the menu zoom settings.

  I also tried with find command using the command of automation of Lecroy. ( http://cdn.lecroy.com/files/manuals/automation_command_ref_manual_wr.pdf ). but I think that there is a problem with the settings of the commands I send to the scope.

  I just need to put the horizontal and vertical centers and scales.

  If anyone can help,

  Thank you.

  Hello

  I use F1 as my FFT here track.

  Commands to change the scales are:

  Vertical Center: VBS ' app. Math.F1.Zoom.VerCenter = XXXX"

  Portrait/div scale: VBS ' app. Math.F1.Zoom.VerScale = XXXX"

  Horizontal at the Center: VBS ' app. Math.F1.Zoom.HorCenter = XXXX"

  Horzontal scale/div: VBS ' app. Math.F1.Zoom.HorScale = XXXX"

  I also want to point you to an application on the scope that will help you.

  If you go to the file menu and select cut, to the office, there is a shortcut to an application called "XStream Browser"

  The browser is an interactive application that will present all automation methods and properties that are available on the scope.  He acually connects to the scope of the request, so you can use it to test various components to see what they do on the scope.  It is very intuitive and I use it exclusively. (this is where I went looking for the commands above for you).

  Here is a link to Chapter 1 of the manual of automation: http://cdn.lecroy.com/files/manuals/04_xstreamautomation_ch1.pdf

  Page 1 - 5 has a quick introduction to the browser and its use.

  I hope that it becomes operational.

  Kind regards

  Leonard Brown

  LeCroy sales engineer

  1-800-5LeCroy

• Can someone give me the steps to disable the touch pad for Dell Inspiron 600 XP?

  I received instructions to set "crazy cursor" on my Dell Inspiron 6000 Windows XP.

  One of the application steps that I disable the touchpad, because I prefer an external mouse.

  Can someone give me the steps to disable the touchpad?

  Thank you!!!

  * original title - fixing "cursor crazy."

  Hello

  here a solution, how to disable the touchpad (Dell):

  http://www.notebookforums.com/forum/thread/105933/heres-how-u-turn-off-touchpad-its-about-time

  LC

• How can I activate my touch Pad? a light is on and the touch pad does not work

  I have a Toshiba laptop and the touchpad equipped with a bright power who insists to stay on and do not let me use the touch pad.

  How to turn off the light or enable the touchpad please

  Thanks in advance if you can help

  R

  I have a Toshiba laptop and the touchpad equipped with a bright power who insists to stay on and do not let me use the touch pad.

  How to turn off the light or enable the touchpad please

  Thanks in advance if you can help

  R

  Your touchpad driver is maybe defective. Go to the Toshiba website from the link below and enter your laptop model number and the operating system that you will find on a label on the back and download it and install it the Touch Pad Driver and see if that fixes the problem.
  http://www.MyToshiba.com.au/support/download

• How to set an MTU of 1600 for test Lab at home for the NSX on Vmware workstation

  Hello.

  I'll set up a laboratory at home to build a laboratory to the NSX. I am running 3 on VMware Workstation 11 Esxi hosts. All three hosts of esxi run each 4 Ethernet adapters on them.

  To configure installation VXlan for my lab at home, I have modified the virtual machine's .vmx file and changed the vmxnet3 device and it works.

  Ethernet1. ConnectionType = "custom".

  Ethernet1.virtualDev = "e1000".

  Ethernet1.wakeOnPcktRcv = "FALSE".

  Ethernet1. AddressType = 'generated '.

  ethernet2. Present = 'TRUE '.

  ethernet2.VNET = "VMnet1.

  ethernet2. ConnectionType = "custom".

  ethernet2.virtualDev = "vmxnet3" - change to vmxnet3

  Adapter type VMxnet3 only is not supported for VMware workstation and also one of my hosts broke down several times with the low error message in the log file.

  2015-08 - 02T 13: 37:48.254 + 10:00 | vCPU-4 | I120: Ethernet3 MAC address: 00: 0C: d 29:a4:7: 8 c

  2015-08 - 02T 13: 37:48.261 + 10:00 | vCPU-4 | I120: VMXNET3 user: Ethernet3 pilot Info: version = 16908544 gosBits = 2 gosType = 1, gosVer = 0, gosMisc = 0

  2015-08 - 02T 13: 37:48.527 + 10:00 | vCPU-5 | I120: VMXNET3 hosted: Packet has no eop, 1 scanner, tx ring size 512, txd valid 0.

  2015-08 - 02T 13: 37:48.527 + 10:00 | vCPU-4 | I120: Ethernet3 MAC address: 00: 0C: d 29:a4:7: 8 c

  2015-08 - 02T 13: 37:48.536 + 10:00 | vCPU-4 | I120: VMXNET3 user: Ethernet3 pilot Info: version = 16908544 gosBits = 2 gosType = 1, gosVer = 0, gosMisc = 0

  2015-08 - 02T 13: 37:51.436 + 10:00 | VMX | I120: E1000: E1000 full rx ring, empty packages.

  2015-08 - 02T 13: 37:53.636 + 10:00 | MKS | I120: MKS - SWB: number of MKSWindows has changed: 1 make MKSWindow (s) total 2.

  2015-08 - 02T 13: 37:55.565 + 10:00 | VMX | I120: VMXVmdbCbVmVmxExecState: change of State Exec asked State poweredOff without reset, soft, softOptionTimeout: 20000000.

  2015-08 - 02T 13: 37:55.565 + 10:00 | VMX | I120: Stopping VCPU son...

  2015-08 - 02T 13: 37:56.567 + 10:00 | SVGA | I120: Fate of thread SVGA

  2015-08 - 02T 13: 37:56.571 + 10:00 | MKS | I120: MKS - SWB: number of MKSWindows changed: 0 record (s) MKSWindow of total 1.

  2015-08 - 02T 13: 37:56.575 + 10:00 | MKS | I120: GDI-Backend: HWinMux stopped making the composition of the window.

  2015-08 - 02T 13: 37:56.575 + 10:00 | MKS | I120: MKS - SWB: number of MKSWindows changed: 0 record (s) MKSWindow of total 0.

  2015-08 - 02T 13: 37:56.575 + 10:00 | VMX | I120: Thread MKS is stopped

  Can someone guide me how to set up a lab NSX on VMware workstation and use 1600 MTU for VXlan traffic. Any help is very appreciated.

  Hi all

  I managed to solve this problem by separating the storage traffic to a different vswitch and the traffic to a different VDS NSX.

  ~ # esxcfg - NICS - l

  Name PCI Driver link speed Duplex MAC address MTU Description

  vmnic0 e1000 up to 1000Mbps Full 00 0000:02:01.00: 0C: d 29:a4:7: Intel Corporation 1500 6th 82545EM controller Gigabit Ethernet (copper)

  vmnic1 e1000 up to 1000Mbps Full 00 0000:02:04.00: 0C: 29:a4:7 d: 78 1500 Corporation Intel 82545EM Gigabit Ethernet Controller (copper)

  vmnic2 e1000 up to 1000Mbps Full 00 0000:02:05.00: 0C: 29:a4:7 d: 82 1600 Corporation Intel 82545EM Gigabit Ethernet Controller (copper)

  vmnic3 0000: 0b: 00.00 vmxnet3 Up Full 00 10000Mbps: 0C: 29:a4:7 d: 8 c 1600 vmxnet3 Inc. VMware Virtual Ethernet Controller.

  ~ # esxcfg - vswitch - l

  Switch name Num used Ports configured Ports MTU rising ports

  1536 5 128 1500 vmnic0 vSwitch0

  Name PortGroup VLAN ID used rising Ports

  The VM network 0 0 vmnic0

  0 1 vmnic0 VMkernel

  0 1 vmnic0 network management

  DVS name Num used Ports Ports Ports configured MTU rising

  dvSwitch 1536 10 512 1600 vmnic3 - for network traffic

  DVPort use customer ID

  7 1 vmnic3

  81 1 NSX 2 controller nsx_controller_4be65643-37ca-468e-b00a-f711d6cc5447.eth0---noeud

  79 1 nsx_controller_8bb60e33-b290-4252-92b1-501aa2f83607.eth0---noeud NSX Controller 3

  110 1 vmk2 - vtep interface for the host

  119 1 Linux1.eth0 - test Linux VM

  This laboratory works fine for me now and my Adviser for laboratory at home will be not to use the same network card for storage traffic that was used for the traffic of the NSX.

  Thank you for all your help.

• How to set the cursor in the text of a message response

  I use TestStand 4.1.1. During testing, I need to analyze some data of the operator.

  I use a popup message with the response enabled text box. My problem is that the cursor does not automatically appear in the running text box. I don't want to have to put the mouse in the box every time.

  Is there a way to set the cursor to be automatically in the text box.

  Kind regards

  Don1.

  Hello

  You must make the answer box the active control. You will find 'Active Control' control in the main tab of the configuration of Message box Properties window.

  Concerning

  Ray Farmer

• How to: get my touch pad to scroll up and down the page, simply by sliding my finger upwards or downwards?

  When I got to my cpu, I could use the built in mouse pad to scroll through the pages. Now, there is no move the pointer. Yes, I switch between an external mouse, and the processor built in touchpad.
  Help, please! It's something so simple, I know, but go nuts looking for the answer.

  Hello

  • What is the brand and model of the laptop?
  • Back that happen with specific appication sone?

  I suggest to install the drivers and the Touchpad software on the Web site of the manufacturer and make sure that the scroll option is not disabled.

  Here is the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-program
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• How to set the parameters of width image scroller

  I followed a tutorial on how to build an image thumb wheel. In this tutorial the scrolling of the image extends from one side of the stage to the other, i.e. flash to the edge. I want to shorten in width, as 50 pixels or the other side of the stage. How to set these parameters? What would be a line of code to cut where I want? Here's what I have for the construction of the wheel:

  /////Build Scroller MovieClip to Contain Each Image
  var scroller:MovieClip = new MovieClip();
  var padding:Number = 10;//creating a var for padding to be used later on in easier calculations
  
  this.addChild(scroller);
  scroller.y = 600;
  scroller.x = padding;
  

  (I tried scroller.x - but he only positioned the scrolling differently on the stage. Once it scrolls on mouse over it yet completely jumps to the left, and in any case it doesn't take care of the right edge)

  Chances are that you only need to add a mask for the scroller object.  Create a rectangle that is as wide as you want the thumbs on the stage that it becomes a movieclip/sprite and assign it an instance name.  Then assign it just like a mask for scrolling using the: scroller.mask = masksInstanceName;

  You may need to adjust the code of a scroller for use limits of the mask instead of the scene if it currently specifies limits for scrolling.