How to set point by default in oneSelectChoice

Similar Questions

• How to set the field "default" of a quick dashboard to yesterday?

  Hello world
  
  I have a dashboard the guest on a date (full name Date.Date and type Date).
  I also have a simple report with two columns: Date.Date and a measure (whatever the name).
  
  I've managed to filter the day before the current date in the report by adding an advanced SQL filter:
  Date.Date = Cast (TimestampAdd(SQL_TSI_DAY,-1,@{system.currentTime}) as Date)
  
  Now, I would like to invite him to select the day before the current date by default.
  The filter on Date.Date would be "invited" or more.
  
  How to set the field "Default" from the command prompt?
  
  Thanks in advance

  Hello

  go to the command prompt...
  Select SQL results of as default: drop-down list.
  here... you have to write your SQL logic...
  who uses by default the previous date
  something like that...

  * Select case when 1 = 0 then anydate column of another timestampadd (sql_tsi_day-1, CURRENT_DATE) of the end SubjectArea name*.

  write like this... and report back...

  Thank you & best regards
  Kishore Guggilla

• How to set a NEW default view in the Explorer of Windows 7?

  [Windows 7 Ultimate 64-bit]

  In Windows Explorer (NOT IE) > component >, how can I set a new default view Permanent, to be: 'Détails' AND 'size all columns to fit. "

  whenever I open Windows Explorer?  I want it to be a change that is automatic & Permanent for all folders, BOTH existing & all new folders I create, every time that Windows Explorer opens.

  Take a look at the following:

  "Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer

• How to set up a default value when setting (request) a value?

  When I ask the user in a SQL statement, then I can declare a default value as in:
  
  SELECT *.
  Of all_users
  WHERE username = nvl ('& $myvariable ',' SYSTEM');
  
  But when I set a variable that it does not work:
  
  set the tablename = nvl ('& tablename test123 ',' ')
  
  How can I configure a default here?
  
  Peter

  Is there a way to set a default value DIRECTLY in SQLplus DEFINE command (and not later, when the value is used in the SQL statement)?

  No, there is not to DEFINE them, but you can use ACCEPT:

  SQL> accept tablename prompt 'Enter value for table Name:' default EMP
  Enter value for table Name:
  SQL> select column_name
    2  from cols
    3  where table_name='&tablename';
  
  OrderNumber=1234
  COLUMN_NAME
  ------------------------------
  EMPNO
  ENAME
  JOB
  MGR
  HIREDATE
  SAL
  COMM
  DEPTNO
  
  8 rows selected.
  

  Max
  [My Italian blog Oracle | http://oracleitalia.wordpress.com/2010/02/07/aggiornare-una-tabella-con-listruzione-merge/]

• How to set group radio default null value option?

  I have a dynamic LOV that appears as a group of radio buttons. I want to display null values (Null display value set to 'All values') to use a custom search page. How to set the default to "all values"? I tried to use the value default '% null' area without success.
  
  O all values (value zero)
  O Option 1
  O Option 2
  Option 3

  Hello

  In order to ensure that "ALL" is selected, you must do a few things:

  1. on the definition of your radiogroup, set the following parameters:

  Display Null: No.
  Value null, display value: (leave empty)
  Value null, return value: (leave empty)

  2. then, update the list of parameter values to include a NULL value. Something like:

  SELECT ' ALL ' d, -1 r FROM DUAL
  UNION ALL
  SELECT DNAME d, DEPTNO r FROM DEPT ORDER BY 1
  

  (in this way, EVERYTHING becomes a part of the data). Note that in this example, I used-1 as "return value zero"-that's because I use a numeric field (DEPTNO). Change a string if you are using a field of VARCHAR2.

  3. create a new calculation of Page. It should run on the radiogroup element header before. The calculation would be a static assignment of the "return value zero" you set above - in my example, it is -1 the calculation should depend on the value of the element being null radiogroup. This, I found it, is the best way to make sure you get a default value before the page is loaded.

  I did all this on: [http://apex.oracle.com/pls/otn/f?p=33642:216]. My report SQL query is then:

  SELECT EMPNO, ENAME, DEPTNO
  FROM EMP
  WHERE :P216_DEPTNO = -1 OR DEPTNO = :P216_DEPTNO
  

  Andy

• How to set google as default search engine?

  I inadvertently put default yahoo through a separate application (bittorrent) and now can't find how to reset google as default search engine

  To change the default search engine or the order of the search engines in the upper search box right in Firefox, please do the following:

  1. Move the mouse cursor inside the search box in top right of the Firefox window and click on the arrow next to the logo of the supplier.
  2. If you want to select another search engine, simply choose the engine in the drop-down list.

  To change the order of search engines, follow these steps:

  1. In the drop-down list, select Manage search engines....
  2. In the next window, you have all your search engines listed. To change the order, simply click on a search engine, and then select move up or move down from the buttons on the right side to change the order of search engines.

• How to set gmail as default email.

  How to configure gmail to default e-mail, so I can see it in the list of default programs and be able to use the Dragon Speaking software.

  I have windows live mail installed but it did not accept the default value.

  shipinom

  You can use WLMail as default e-mail, but Gmail client program the account used to send and receive mail.

  This will also work with the Dragon, because the Dragon needs a client program e-mail with which to interact.  He cannot interact directly with the gmail Web site.

• How to set up the default location in FF?

  So whenever I check on the 10 day weather, default FF is a good location about 25 miles away. I don't find a way to set MY real in FF position while he is the default one. We live in the foothills and weather is very different from the other city, which is on its shore.

  Questions about the Forecastfox add-on has been published frequently these last time and since you don't mention Google weather 10 day specifically I guessed wrong - so shoot me.

  That said this page on your site?
  http://whatismyipaddress.com/

  Your IP address is usually used to determine your physical location. If you are in a rural area, it may be shifted many miles depending on your ISP and how well they "report" your location on the network to their service. And it can sometimes be misleading many miles when their network is being upgrades; usually just temporarily.

• How to set point without the use of fields values in the block of the branch action?

  Well, I'll try to say this in an easy way, isn't weird.
  
  I created a button, RECORD, which is a branch of the type of management: management of the function return A Page. This is my code for the branch:
  
  If: P2008_NAP_SUPPORTING_MATERIALS = "Yes" then
  return "2092";
  on the other
  return '2040';
  end if;
  
  The code for this type of service is stored in the block the ACTION of the direction of the page. The ACTION block for a branch of the type of direction: direction to the function return A Page is different from that of the ACTION block for a branch of type branch: branch Page or URL.
  
  I need to set some values of point with specific values, which I can do with a type of branch: branch Page or URL. This is not possible with the type of direction: direction of the function return A Page. The ACTION block is totally different.
  
  How can I set certain values on Page 2040 of 2008 Page say without using field block action of the branch?
  
  Thank you in advance,
  Maggie

  You must change the Source used to "only,...". "If you want the value passed to use instead of the value of the extraction of the line. However, in case you go to the page and look for the value of line-extraction used, you must pass in a flag of some sort, the presence or the absence of which can report a process header before or calculation to set the item null, allowing the extraction line value to use.

  Scott

• How to set the type default XControl 'control '?

  Hi all

  LabVIEW 2009 + DSC

  How can I configure the type default XControl be 'control '? For example when I drag and drop the Xcontrol VI project is always kind of indicator, and I want it to be a control. Of course I can change it manually after a fall, but when there are many XControls that takes time.

  BR, Jim

  In the façade VI you can get the "change management event" uses the following code to be an "indicator only.

  

  The same code can be used in the init State.

  Tone

• How to set up a default mail client in Win7

  I just installed Win7 for my laptop and also installed computer Claws Mail.

  I wish that Windows uses claws as default e-mail client. (for example, in Internet Explorer, click on file/send to delivers an error > no default e-mail client)

  Claws does NOT appear on the list of programs in the list of default programs.

  Claws appears in the list of Protocol as an application MAILTO.

  This should be a really basic question.  I'm still at it for hours.

  TomJV

  Hi Tom,

  Thanks for posting your query on the Microsoft Community.

  As you said, you cannot set a default email client.

  I suggest you to check if the clutches of program is available in programs and features. Follow the steps below.

  1. Click the Start button.
  2. Click programs and features.
  3. Locate the program.

  If the program is not available in programs and features, then I suggest you to reinstall the program and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows/install-program

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I suggest you try the steps in the following Article to help Microsoft identify as default program.

  See the link below.

  http://Windows.Microsoft.com/en-us/Windows/change-default-programs#1TC=Windows-7

  I hope this helps. Please let us know the results. We will be happy to help you further.

• How to set Google as default search engine in Firefox 5? I tried several fixes, but I get a Yahoo instead of Google search.

  I want to use Google as my search engine, but no matter what I change the default search engine settings is still Yahoo.

  I would also like to have the track back feature when I opened a new tab, it shows often used pages that I can click on and open.

  First of all, thanks to dmcritchie. His solution was helpful. However, I didn't uninstall my Yahoo Toolbar because I have buttons, bookmarks, etc. that do not migrate.

  For those of you, like me, who want to continue to use your Yahoo toolbar as well as the use of the Google toolbar, here's another solution:

  Rather than uninstall the Yahoo toolbar just hide it. Go to the command bar, select view > toolbars > then uncheck Yahoo toolbar. (See first image)

  Then...

  1. Open a new tab.
  2. Go to the address bar and type auto: config and press the Enter key.
  3. A warning box appears. Close the box by clicking on the button "I'll be careful, I promise". (See the second picture)

  When the text comes up,

  1. Scroll down until you find "browser.search.defaulturl" it will be in bold. Third image, with the selection highlighted by me)
  2. Right click and select the first option which should be "modify", then
  3. Type (or copy and paste) the following:

  http://www.google.com/search?ie=UTF-8&oe=UTF-8&q=
  

  Then,.

  1. Scroll down until you find "keyword." URL"it will be in bold.
  2. Right click and select the first option which should be "modify", then
  3. Type (or copy and paste) the following:

   http://www.google.com/search?ie=UTF-8&oe=UTF-8&q=
  

  Finally,.

  1. Scroll down further until you find "yahoo.ytff.search.popup_src" again, it will be in bold.
  2. Right-click on the expression, and then select 'Edit'.
  3. Type (or copy / paste) in the following:

  http://www.Google.com/search?ie=UTF-8 & oe = UTF-8 & q =

  1. Close the tab

  And you're done.

  This will allow you to keep all the buttons and bookmarks you have in your Yahoo toolbar without side effects unpleasant to have Yahoo away your research and give you the darned Search 404 error pages.

  I hope this helps.

  PS while you make changes to the configuration: automatic, be sure to copy the values that you are editing in a Word Pad document for later retrieval. Be clear about what "preference name" you have accessed and what 'value' you changed. " In this way, if necessary, you can always go back and everything returns to its previous state. I titled my document "Firefox AboutConfig Changes".

  Good luck!

• How to set up the default value in the ADF option button?

  Hi all

  I use 11.1.6

  I want to put the default value in the radio button (in the UI).

  EX: I have a SelectOneRadio as sex

  In these two values, one is male and secondly a woman.

  I need to see the default value of the male part of the user interface.

  I mean when the loading of the page it should show male is checked in the user interface part?

  Someone help with this task?

  Ok

  So in your BinderSolutionsBean, you have an attribute called;

  String scenType;

  public String getScenType()...

  What you need to do is to initialize scenType to rtb;

  public BinderSolutionBean {}

  String scenType = "rtb";

  .

  .

  .

  }

  Hope this makes sense;

• How to set point values when redirecting to the same page.

  I just create a button to redirect I want to redirect to the same page and place 2 elements on the page to the same value they had before the redirection.
  But I can not write:
  Place these items: P1_Permit_Number, P1_Fishing_Year
  With these values: & P1_Permit_Number, & P1_Fishing_Year.
  
  Because there are no values in session state, because a shipment has not been done.
  
  So, how can I do this?
  I know how to get the values stored in the elements, for example, $v ('P1_PERMIT_NUMBER')
  but where should I put this command? It is not allowed under the "with these values.
  And I don't really want to make a button "submit" and create a process that says:
  P1_PERMIT_NUMBER: = $v ('P1_PERMIT_NUMBER'), because that would complicate the page too - I already have other branches and the process on the pages which conditions have to be modified so that they do not work in this scenario.
  
  Thank you.

  Hello

  The syntax seems correct to me. Your summers of uppercase element names?

  Try:

  alert("Here");
  var permitNumber = document.getElementById('P1_Permit_Number').value;
  alert(permitNumber);
  var fishingYear = document.getElementById('P1_Fishing_Year').value;
  alert(fishingYear);
  var url = 'f?p=&APP_ID.:1:&APP_SESSION.:Vessel_Display:::P1_Permit_Number,P1_Fishing_Year:' + permitNumber + ',' + fishingYear;
  alert(url):
  window.location.href = url;
  

  All alerts MUST display expected values. Doesn't it?

  Andy

• How to set up default InDesign CS5 in the system with InDesign CS4 has the default value?

  How to set the application default .indd InDesign CS5 when you installed CS5 and InDesign CS4 and InDesign CS4 is the current default (InDesign CS4 has been installed after the installation of CS5)

  Thanks, but I already tried at first, but is not effective.

  I think that its because of this reason:
  The two - InDesign CS4 and InDesign CS5 have their application/program/exe named "indesign.exe".

  Installation of either InDesign CS4 or InDesign CS5, sets a default for the 'indesign.exe' Windows path. In this case, since InDesign CS4 was installed later (after InDesign CS5 was already installed), the "indesign.exe" which has been staged "Indesign.exe" of InDesign CS5 has been replaced by "Indesign.exe" of InDesign CS4.

  But after long google and searching through regedit, I have the solution:

  1. Search for HKEY_CLASSES_ROOT\InDesign.Document\Shell\Open\Command in regedit
  2. Change the value of the attribute (default) for "C:\Program Files (x 86) \Adobe\Adobe" '%1' / / including the quotes

  Post edited by: Vidit Kothari