How to set tasks such as cancelled
Guys,I had a scenario, where I wrote an setObjectStatus adapter that defines the status of RO as revoked.
So I put in service a resource to a user and did some updates on resource profile as well, the status of the Office of receiver is put into service and tasks
like create a user, put abc update etc... as completed.
Now I fire the setObjectStatus adapter and sets the status RO as revoked successfully. Checkboxes as activate, deactivate, revoke etc. are disabled subsequently set the RO as revoked status. But the task inside doesnot become cancelled.
Any ideas how to achieve cancellation of tasks?
Thank you
'Suren '.
Surendra salvation.
What did you do when you run the tcUserOperationsIntf.getObjects (take)? When you run this method, you will get all the instance of object for a specific user, so read the attribute of the Instance.Key object.
In addition, you can call the methods below to useroperationsintf:
void revokeObject (long plUserKey, long plObjectInstanceForUserKey)
Revokes the provision of an object for a user directly without a a request.
void revokeObjects (long plUserKey, long [] paObjectInstancesForUserKey)
Revokes the provision of an object for a user directly without a a request
Renato.
Tags: Fusion Middleware
Similar Questions
-
How get/set the value of the DataObject object in the task of the API?
How get/set the value of the DataObject object in the task of the API?
Are there examples of code availible?
Hello
You are here: http://docs.oracle.com/cd/E23943_01/dev.1111/e10224/bp_worklistcust.htm
Antonis
-
How to set the calendar tasks?
I want to put a task based on the following conditions,
1) run on each week (Monday to Friday) at 10:00
2) run only on the following months: between March and November
Anyone have any suggestions on how to plan this work in XP?
Thanks in advance for your suggestions
Hello
You can check the link below to create the scheduled task in Windows XP.
How to schedule tasks in Windows XP
-
How to set the voltage on a 3.3 volt NI 9237 module?
Hello
How to set the voltage on a 3.3 volt NI 9237 module?
The voltage is now at 2.5 volts.
This is my first time with this camera.
This set of MAX or are there jumpers?
I want the value of the excitation voltage at 3.3 Volts and do not change.
The NI 9237 is a NEITHER cDAQ-9172.
Thank you
Bill
Hi POBA,.
This can be set to your programming environment. For example, LabVIEW Signal Express, a task of MAX, or a DLL call in a text-based environment. You want to create a strain, tension Custom with excitement, or any bridge based task in any environment.
"" "In MAX, right-click on your device and choose create a task" acquire signals "analog input"...
"" "In LabVIEW, place a DAQ Assistant" acquire signals "analog input"...
"" "In Signal Express, add a step for Acquire" DAQmx Acquire"analog input"...
In any C language based, you will want to call a function such as: DAQmxCreateAIVoltageChanWithExcit, DAQmxCreateAIStrainGageChan, DAQmxCreateAIBridgeChan
You can then specify the Source of Exictation to be internal to 3.3V.
Best,
-
How to set programmatically a LabVIEW exe * Windows * priority?
I have an executable of LabVIEW that makes data acquisition to 10 kHz on an ongoing basis and under certain conditions of dumps of these data to a CSV file that is viewable in Excel. We noticed if the file becomes unusually large and someone tries to open this file so that DAQ'ing is always in course (but does not connect), Excel will monopolize the CPU long enough such that the exe of LabVIEW does not have enough time CPU to extract data from data acquisition until the data in its circular buffer gets replaced. I could try to simply increase the size of the buffer DAQ, but really, the solution is to have this executable LabVIEW have "priority" over other executables non-LabVIEW (such as Excel.) Looking at properties VI--> execution--> set the priority seems to only define the priority between other threads LabVIEW but says nothing about how a thread LabVIEW is prioritized to another non-LabVIEW exe. I have confirmed this by setting the LabVIEW execution property to 'critical moment' and then in the Task Manager and windows reports still his priority as "normal". How can I set the * Windows * priority of an executable of LabVIEW without having to do it manually via the Task Manager?
Thank you
Ninja Edit:
I should mention that I am building the executable is nothing else than a "master GUI" which generates four LabVIEW modules in sub-panels using static VI refs and displays important data from these four modules persistent "dashboard". Modules to do all the boring tasks such as DAQ'ing and display data in charts. Because I am compiling my code in a single executable using the GUI 'master' as the boot VI, set the priority in properties of VI flow down to the modules I load in sub-panels or will only the priority of the Master GUI be changed? On a related note, should I set four enforcement system 'Data acquisition' modules, then the master GUI to ' User Interface?
You can try calling the next VI. It sets the priority for the current process and has worked for me in the past on XP.
-
How to set up my old e-mail account on my new computer?
My old E-mail need
Hello, recently my computer succumbed to a virus and it does not start, my son built me a new computer and install windows 7 that I was too frustrated with windows vista. I use email a lot and it is necessary for a lot of all my tasks of day. However, the new email on windows 7 requires that I have check the email account I want to use. However, since the death of my old computer I don't have anyway to do. I used windows vista built in program and used an email me given by my ISP, not something like gmail or hotmail. Is - it there anyway I can use my old email so that email people that I do not lose me?Windows Live Mail is an e-mail client, such as Outlook Express and Windows Mail.
Basically, an e-mail client is a small application that is not related to any provider of e-mail and allows different providers of e-mail accounts to be integrated into one or more mailboxes mailbox within the application.
There are probably some instructions on the Web site to your Internet service provider who could tell you how to set up Windows Live Mail, but the simplest is to call the ISP directly and ask them to guide you through the process of email all configuration.
Good luck.. :-)
-
How to set up the schema and users?
Hello
I'm looking for the best option for the implementation of the user and the schema in my used Oracle instance only for reports. Version using Ora11g.
Background-
Oracle Ora-Ainstance, is the live OLTP system.
Oracle Ora-B instance will be the new system of reporting , I am building this new system as a reporting instance. My question is how to set up users and safety for installation below?
Planned - approach
Instance Ora - has, some subsets of data is moved to instance Ora-Bnight batch. Using the dblink, I'll be the data.
Required users on Ora-B.
1) ETLUser. -Will extract the data instance Ora-A and load B Orapending. (User charges/written in the tables only)
2) ReportViewer - read only access on the tables in the instance of Ora-B, for the generation of reports. (User reads only the data in the tables)
You want all report data in a new scheme called 'Report', in the basis of the declaration.
So, how I setup user and schema?
Thank you
Krishna
Unless you are using versions of the previous decade and material, I do not recommend a separate database. Material and modern versions run mixed workloads much better that the older systems were, so the need for a statement of the separate databases is dwindling. The current trend in the industry is to CONSOLIDATE, less material treatment and bodies less.
This has the additional advantage that your refreshes need not go on the network - you get faster performance of refreshment. They share a buffer cache, so you can get the benefits of data already in memory. If you are concerned about the damning reports of the treatment, the resource manager may set limits as needed.
Your planned approach to ETLUSER and REPORTVIEWER is solid - good separation of responsibilities. I would just create these ORA - a, the size of the SGA and CANCEL accordingly and allocate storage, assuming that the hardware supports the need for capacity.
Users and schemas are almost synonymous concepts in Oracle. They are separated in other platforms to database (such as SQL Server). In Oracle, when you create a user, you have created a pattern.
-
How to set the properties of the EOS in the IVI driver
I am coding a compatible driver IVI (in LabWindows/CVI) for an old GPIB instrument that does not support the EOI. To read the response device, I need to define the character of the EOS and terminate read on EOS. MAX I can correctly set the properties of communication and communicate with the device, but I do not know how to set these values in my driver. I tried if various attributes (for example with viSetAttribute (io, VI_ATTR_TERMCHAR_EN, VI_TRUE)), but still get errors (I guess I should use the incorrect session handles). How to set these properties inside the device IVI driver properly? These parameters must be active for this specific device only - all other devices on the bus use EDI. So I think that I can not just in the world, set this property on the map.
Any help is appreciated. Thanks in advance,
Martin
To change VISA attributes as parameters EOS via the pilot of the IVI, your application must first acquire the handle valid VISA (VISA session) or the IVisaSession interface. The first is applied when the uses of pilot IVI VISA - C API and the latest is applied to when the IVI driver uses VISA COM API. Session handle of the IVI - C (that was returned by the function _init()
) is * NO * a VISA manage so you cannot call the API C VISA with the session handle. I don't know if the IVI driver you are using has such a property or attribute allowing to access the handle VISA or IVisaSession interface, but for example, driver Agilent IVI COM "IO" property, which returns the reference to IVisaSession or any good VISA com interface.
Makoto
-
How to set the timeout of read when using channelReader.ReadWaveform?
I'm using a USB-6210/a. data acquisition, and it works fine until I have to take a longer than 10 s waveform.
When I take a longer than wave form, I get the error 200284, "some or all of the requested samples are not yet acquired. To wait for the samples become available use longer read timeout... »
No problem, I thought, I'll just put a longer period. I searched through the documentation, and the timeout only I found was the watchdog timeout. When I wanted a longer value, I get code 200452 State - specific property is not supported by the device or is not applicable to the task.
I use the code in the example AcqVoltageSamples_IntClk.2008 .net with c# in Visual Studio 2008, .net 3.5 sp1.
How to set the timeout so that ReadWaveform() is not the time?
Here is the code:
privateAnalogMultiChannelReaderchannelReader;
privateAnalogWaveform
awf; publicList
GetWaveForm() {
Try
{
Task getWaveform = newTask();
getWaveform.AIChannels.CreateVoltageChannel (Channel,"", TerminalConfiguration, RangeMinimum,
RangeMaximum, AIVoltageUnits.Volts);
getWaveform.Timing.ConfigureSampleClock ("", SampleRate, SampleClockActiveEdge.Rising,)
SampleQuantityMode.FiniteSamples, NumSamples);
getWaveform.Control (TaskAction.Verify);
channelReader = new AnalogMultiChannelReader (getWaveform.Stream);
AnalogWaveform
data = channelReader.ReadWaveform (NumSamples); AWF = data [0];
samples As new List
(); for (inti = 0; i)
returnsamples;
}
catch (DaqExceptionexception)
{
MessageBox.Show (exception. (Message);
}
List of
l = newList (); return l;
}
Thank you
Curt
Hi Curt,.
Here is a Knowledge Base that can help you to set the timeout setting in your code:
-
How to set up bluetooth for Windows by toshiba stack
Trying to install different fireplaces / drivers in order to use the bluetooth features.
These instructions are incredibly confusing for something seemingly simple. I think I have all the chimneys of nesicery / driver updates however
Im not very good at this stage. I could use a little help here.
Hello
Most Toshiba have start - programs - Toshiba - BlueTooth.
Check with Toshiba Support, their drivers and documentation online and ask in their forums where he
others will be with the same or similar models.Toshiba - Forums
http://laptopforums.Toshiba.com/Toshiba - Contacts
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contactToshiba - drivers - access your model - value downloads - so all operating systems - BlueTooth
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=downloadToshiba - Support
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp------------------------------------------------------------------------------------------------------------------------
Information to help you if you need problems (use Toshiba configuration methods to activate BT).
Hardware devices not detected or does not work - a Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAdd a BlueTooth device to your computer
http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computerSet up a Bluetooth compatible device
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-deviceThe problems with Bluetooth devices
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devicesHow to set up a Bluetooth connection
http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connectionThe Bluetooth item in Control Panel on a Windows Vista SP2 computer does not
as expected when you click on the element - for Windows 7 this check manually
http://support.Microsoft.com/kb/960531/en-usIf you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.
BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
devices around you. For each detected Bluetooth device, it displays the following information:
The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
Last detection time and more. BluetoothView can also warn when a new Bluetooth device
is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREE
http://www.NirSoft.NET/utils/bluetooth_viewer.htmlBluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
the standard output. For each Bluetooth device, the following information is displayed: MAC
Address, name, Major Device Type, minor device Type and possibly the name of the company of
the device (if the external file of MAC addresses - oui.txt is provided) - FREE
http://www.NirSoft.NET/utils/bluetoothcl.html---------------------------------------------------------------------
Change settings for a Bluetooth compatible device
http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-deviceAdd a Bluetooth device to your computer
http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computerAdd a Bluetooth device or other wireless or network device: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions---------------------------------------------------------------------
More information of possible interest to some:
What is a Bluetooth personal area network (PAN) network?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-Bluetooth-personal-area-network-PanConnect to a Bluetooth personal area network (PAN) network
http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-a-Bluetooth-personal-area-network-PanI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
How to set up a keyboard shortcut
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas: you want to learn how to set a keyboard shortcut for the games
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
If you wish to set up a keyboard shortcut to open a game, try this program http://download.cnet.com/Keyboard-LaunchPad/3000-2094_4-10216877.html?tag=mncol.
Unfortunately there are no programs that can create keyboard shortcuts for functions in the game.
I hope this helps. -
Windows Media Player - how to set the repeat function?
I set a schedule to play music using Windows Media Player, if I set the repeat function, then it will play the file audio repeatly, but first I would annex plays a sound at a specific time only once without repeat and play another his repeatly at another time, someone has suggestions on how to set this option on the calendar?
Thanks in advance for your suggestions
Hello
What version of Windows Media Player you have installed?
Try to create individual selections with each audio file. Later, try using the repeat function.
If you use Windows Media Player 11, you can follow this link.
Shuffle and repeat items in Windows Media Player
Reference: How to schedule tasks in Windows XPHope the helps of information.
Please post back and we do know.
-
How to setting assisted by Hardvare activate virtualiziation for the computer?
How to setting assisted by Hardvare activate virtualiziation for the computer?
Original title: the Hardvare-assisted virtualization
Activation of hardware assisted virtualization is in the BIOS of your motherboard. How depends on the BIOS and the hardware you have.
If your system is a laptop or made by a major system provider such as Dell or HP, the system may not have the option in the BIOS, even if the hardware is able to use hardware assisted virtualization.
-
How to set the font "ARIAL" family in the RichTextField?
How to set the font "ARIAL" family in the RichTextField?
I saw a LOF of the sample displayed how set the font family in the RichTextField, such as defined as CBTF_FONT.
But how can I put it as Arial font? If it cannot be, anyone could list a family table of fonts available for use in the Blackberry?
You are right, for these devices you can use fonts already on the device.
-
How to set up a Lan to Lan VPN without using your external IP address?
I have two 28 subnets A & B.
My PIX and ASA outside interface addresses are both in A subnet.
I am in the middle of a migration of the PIX to ASA and need to use the PIX outside of the address of the interface on the ASA for the last two remaining lan to lan VPN.
I do like that because the sellers of these virtual private networks to connect to are huge dinosaurs IT and the aaages to get their sh * t tri... This means that I have to pass the IP address to my ASA, so I can't sentence have change for a new IP peer.
I tried to figure out how to set a specific my counterpart VPN IP address but I can't figure out how...
I even physically connected a second ethernet port and tried to give a similar IP in the same range, which it says it is not possible to have both outside the IP addresses on the same subnet.
Hello
It is not possible to have an IP address "secondary" on the physics/logic interface of a Cisco firewall.
And as you've noticed, you cannot configure the same subnet on 2 different interface either.
We are talking about such a large configuration that you want to just migrate from completely to the ASA PIX and make a switch during a maintenance window?
Couldn't you just pass the ASAs 'outside' IP address address to that on the PIX and move the ASAs 'outside' of the PIX? Or not the ASAs "outside" IP address already some configured related to what makes this impossible?
-Jouni
Maybe you are looking for
-
How to access the channel values?
I'm new to scripting language DIAdem. I TDMS has a group and several channels with String type all. How to read the first 4 characters of each string values and store into the new channel? Example of data file attached. I tried for the statement
-
Questions of blackBerry Z30 face after clearing security
Hello After clearing security to my new BB Z30 my battery drains quickly and also there have been downgraded to OS version 10.3.2.2876 10.3.2.2836 please help me level question OS and battery... Am new to the BB device
-
In 4.5 notification icons
I try to display the notification for my app icons, but I run minus 4.5 therefore, the API that I used to do on 5.0 isn't here. Is it possible that I can do this?
-
* Original title: it just that chat site which gave me a HRT page cannot display so I click fix coinection problems and he gave me your dns server may be unvailiable This is a chat site called babblesex problems, said Sunday and its been 5 days becau
-
I installed the software adope and created adope creation of ID after registering the software it is showing the following error message" ACCESS DENIED"-YOU ARE NOT ELIGIBLE to USE THIS PRODUCT OR SERVICE because of THE eligibility REQUIREMENTS for S