How to set the criteria used by the VI Analyzer?

Similar Questions

• How to set the output meter channel to generate a signal pulse using DAQ6008

  Hello there I am generating a pulse signal of 100 Hz and a duty of 20% of the 6008 data acquisition cycle using visual studio 2013. I have code that needs to generate this but I'm not sure on how to set the channel output meter. When I run this NI MMAX and my vb error code indicates that the physical channel is not supported. I am a user of data acquisition were first and would appreciate any help offered.

  If you look at the USB-6008/6009 User Guide and specifications, you will see that the counter in these devices cannot rely as edges of entry. It cannot generate a pulse.

  Lynn

• How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  I found a solution! -Set the size and position of the façade with the help of the

  File > VI properties > window running Position (in category list) > custom (in position of menu drop-down).

  then just accept the current position and size (leave the boxes checked) or set values you want directly (uncheck the boxes and fill in the numbers), or physically position and size the façade and use, the "set to current location" button and press "set size" current All that is easier for you.

  OK so it does not make use of the method VI Methods (Active X) FPRunTimePosRunCustom ([Position], [Size]) but if labview want to make him difficult to use then other means must be found.

• How to set the timeout of read when using channelReader.ReadWaveform?

  I'm using a USB-6210/a. data acquisition, and it works fine until I have to take a longer than 10 s waveform.

  When I take a longer than wave form, I get the error 200284, "some or all of the requested samples are not yet acquired.  To wait for the samples become available use longer read timeout... »

  No problem, I thought, I'll just put a longer period.  I searched through the documentation, and the timeout only I found was the watchdog timeout.  When I wanted a longer value, I get code 200452 State - specific property is not supported by the device or is not applicable to the task.

  I use the code in the example AcqVoltageSamples_IntClk.2008 .net with c# in Visual Studio 2008, .net 3.5 sp1.

  How to set the timeout so that ReadWaveform() is not the time?

  Here is the code:

  privateAnalogMultiChannelReaderchannelReader;

  privateAnalogWaveform awf;

  publicList GetWaveForm()

  {

  Try

  {

  Task getWaveform = newTask();

  getWaveform.AIChannels.CreateVoltageChannel (Channel,"", TerminalConfiguration, RangeMinimum,

  RangeMaximum, AIVoltageUnits.Volts);

  getWaveform.Timing.ConfigureSampleClock ("", SampleRate, SampleClockActiveEdge.Rising,)

  SampleQuantityMode.FiniteSamples, NumSamples);

  getWaveform.Control (TaskAction.Verify);

  channelReader = new AnalogMultiChannelReader (getWaveform.Stream);

  AnalogWaveformdata = channelReader.ReadWaveform (NumSamples);

  AWF = data [0];

  samples As new List();

  for (inti = 0; i)

  returnsamples;

  }

  catch (DaqExceptionexception)

  {

  MessageBox.Show (exception. (Message);

  }

  List of l = newList();

  return l;

  }

  Thank you

  Curt

  Hi Curt,.

  Here is a Knowledge Base that can help you to set the timeout setting in your code:

  The property using Timeout of DAQmx task in Visual Studio

• How to set the value of QUERY using PL/SQL process?

  Hello
  
  I use APEX 4.2...
  How to set the value of the REQUEST using process of PL/SQL which lies before the header - where the value of the REQUEST should appear on the URL?
  
  Kind regards
  Fateh

  You cannot set a value of demand in a PL/SQL block. You can run a PL/SQL block on a request which is the id of a button for example.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Apress.com/9781430235125
  http://Apex.Oracle.com/pls/Apex/f?p=31517:1
  http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
  -------------------------------------------------------------------

• How to set the doctype node using dbms_xmldom?

  Hi all
  
  IM using oracle 10g. I generated an xml file using dbms_xmldom.
  
  I need set the version xml and doctype to my xml file.
  
  XML version I've defined using dbms_xmldom.writeTofile.
  
  But not able to set the doctype... tried with dbms_xmldom.makedocumenttype... But no result...
  
  How to set the doctype using dbms_xmldom?
  
  Concerning
  Sankar MN
  
  Published by: SankaraNarayanan.M.N on October 17, 2011 05:40

  http://download.Oracle.com/docs/CD/B19306_01/AppDev.102/b14258/d_xmldom.htm#i1121082

• How to set the pixels for the softer - edge, in a design? I use PhspCS5 TRIAL grateful for help!

  First of all, I'm not a rather advanced digital artist know the tools of basic (a bit) and I'm pretty good with those who, over the years, however, have a new Mac and better

  visibility for sure and an ASSESSMENT of PSHP CS5 Extended version; what I'm asking is: how to set the pixels... to achieve the softer contour for example. I have

  greeting card templates and is now working on a Christmas tree, with gold stars, they better look (vy-light = blk) but when I ZOOM IN I see the ' wavy lines

  pixels, which appear on the 'place '.  I would like to know how to set the pixels * 1 # and then with respect to colors, when I take a yellow (there are many! yellow!)

  and use my Intuos "tap tap tap" pen drawings (yellow), it does NOT save... (he did it on my other computer and CS4 more aged).  So going

  back to my swatches of color, of... .remember just what yellow I took... ha ha... can be: "not so fast!"

  I buy this subscription at the end of the trial and my bet is that the color picker / working on the purchased version when I "tap tap" to pick up the

  same color II had chosen.  Wouldn't it be good to have a monitor of sorts that says you, what color (s) is used when you need to know, to go

  on the 'design' say after a break for tea, etc.  ?????  (    :

  I save my drawings when facts JPEGs and see now, there's a JPEG 2000... I don't know what it is all about.  I save pdf (1) and a jpeg.  Hope that this sounds

  like what we "do"... When we know much more than me.

  And finally, what program or tool, can a use to put a 'framework' (border) around an eg: 5 x 7 design (again, my goal is for my greeting cards designs.  Are there

  another of Adobe products, I would have to do this.  Free hand has not worked so well, so far.

  I'm in advance, so grateful to you - anyone you may, for your help.  I'm on my way 'Hooray' last now in the hope of success soon... I am a senior of 71

  and so feel I have to really "go there" and learn these basics to ensure my chances of success, at least. Thank you, thank you & thank you! CDW

  Please post in the Photoshop forum.

  http://forums.Adobe.com/community/Photoshop

  Bob

• How to set the time between slides in a slideshow (iPhoto, el capitan)

  How to set the time to say - 5 seconds or 20 seconds - between slide show photos in iPhoto. I use el capitan.

  See the Settings button at the bottom right of the toolbar (at the bottom of the slide show). Click on it and you have a small window with two tabes, refers to all the slides, the other to the selected slide. You can make your choice

• Satellite C660 - how to set the focus of the webcam?

  Hello

  Just bought this laptop, the built-in webcam looks very blurry when I use Skype. Does anyone know how to set the focus to the subject?

  See you soon
  Jules

  Hello

  to be honest, I have no idea on your model of lap... Try to update driver webcamd and play with Skype video settings.

• How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  Thank you very much for your help, if necessary.

  Quite a few questions, send, but I will do what I can to answer them.

  I recommend first to buy a router, even if it's one you won't connect to internet and it network with others your PC and printer. This will give you the best features and the results of what you're trying to do.

  In addition, the automatic stop of the printer function can be disabled and is not affected by the type of connection. Usually, you can go through the configuration Menu and select tools to change the options there on the energy saving features.

  Finally, the auto off function on your computer is a Windows question, but one easy answer. If you're on a laptop, you can right click on the battery in the tray (lower right corner) and change the settings for energy conservation.

  You might be better off installing the printer via the USB cord and alternately inspiring when you use it, but which is not optimal if you are printing only a few documents on an irregular basis. A network connection is the easiest to manage across multiple computers, honesty, but you have certain requirements for this connection and limits as well.

  I hope this information is useful!
  

• How to set the path of the report in a plugin for model

  I'm trying to figure out how to set the path of the report in a plugin process model. I can't find a way to have access to it. It seems this would be a reasonable thing to do since the plug-ins are for the treatment of the results. Does anyone know how to do this? We generally use the sequential process model, but I try to keep my plug-in as independent as possible.

  Thank you.

  If I understand correctly, you want your plug-in, when enabled, change the settings of all other instances of the report OR plugin as their reports share the same directory that your plug-in is configured to use.

  If so, your plug-in can access and change the settings of all other instances of plugin. All instances are passed to all the points of plugin entries in the subproperty of the plugins of the ModelConfiguration parameter table. You can browse this table. Any element of the array with an equal to "NI_ReportGenerator.seq" Base.SequenceFilename is an instance of the report OR plugin. Its report options are stored in the element under PluginSpecific.Options.

  You can change the report options to what you want. Note that the recall of the ReportOptions model is called from template-plugin Initialize entry point, then you might want to ensure that your changes are applied after that, so they are not replaced. To do this, you could make your changes in the Initialize entry point of your plugin and make sure your plugin runs last. To rotate the last, you can set the FileGlobals.ModelPluginComponentDescription.Default.Base.RunOrder in your file of plug-in with a value greater than 0, for example 1.0 (see Help for TestStand > Fundamentals > process template Architecture > plug-in for the model process Architecture > Structure of the plugin sequence files > plugin model of entry Points > Order Execution of Point of entry at run time).

• How to set the value of a variable in a cluster in LabVIEW to c#?

  Hi guys, I'm working on a small c# program, which by using the interface provided by LabVIEW.  And I know that, with the help of lv. SetControlValue (name, value) can set a variable just on the front panel. But in my case, there are several groups on the front panel. Then it confused me how to set the variables in these groups. For example, there is a cluster named clusterA and a variable named a., I tried something like this:

  lv.SetControlValue("clusterA.valueA",1);
  

  but it totally inoperable. Everyone has some experience with this sort of thing? Thank you very much!!

  Hey guys, thanks a lot for all your response. I just found a simple way to solve this problem. For example, there is a cluster named "ClusterA", and there are only two witnesses, who are: an int value named "IntA" (default = 10 IntA value) and a string value named "StringA" (by default the StringA = 'abc'). In c#, if you call the method:

  var clusterA is vi (Array). GetControlValue ("ClusterA");

  you will get a table looks like: clusterA = {10, 'abc'}; So if you want to change IntA 123, you simply do:

  clusterA.SetValue (123, 0); 123 the value, 0 is the index of IntA in clusterA, after this clusterA table = {123, 'abc'}

  After that, simply to make the table in LabVIEW using:

  VI. SetControlValue ("ClusterA", clusterA);

  and now you see the LabVIEW, IntA is changed.

• How to set the Destination of scanning for your Hp Printer in window - 7

  How to set the scanning for your printer Destination is a common question is asked.  I am including a useful video that will guide you in the process.

  I hope this video helps.

• How to set the zoom settings menu for lecroywaverunner 6050A

  Hello

  I am trying to initialize the zoom settings of a track of the labview on a Lecroy WaveRunner 6050 A fft. I found how to set the parameters of the fft with the manual of the remote control for LeCroy scopes  http://cdn.lecroy.com/files/manuals/wm-rcm-e_rev_d.pdf ) but I have not found how to set the menu zoom settings.

  I also tried with find command using the command of automation of Lecroy. ( http://cdn.lecroy.com/files/manuals/automation_command_ref_manual_wr.pdf ). but I think that there is a problem with the settings of the commands I send to the scope.

  I just need to put the horizontal and vertical centers and scales.

  If anyone can help,

  Thank you.

  Hello

  I use F1 as my FFT here track.

  Commands to change the scales are:

  Vertical Center: VBS ' app. Math.F1.Zoom.VerCenter = XXXX"

  Portrait/div scale: VBS ' app. Math.F1.Zoom.VerScale = XXXX"

  Horizontal at the Center: VBS ' app. Math.F1.Zoom.HorCenter = XXXX"

  Horzontal scale/div: VBS ' app. Math.F1.Zoom.HorScale = XXXX"

  I also want to point you to an application on the scope that will help you.

  If you go to the file menu and select cut, to the office, there is a shortcut to an application called "XStream Browser"

  The browser is an interactive application that will present all automation methods and properties that are available on the scope.  He acually connects to the scope of the request, so you can use it to test various components to see what they do on the scope.  It is very intuitive and I use it exclusively. (this is where I went looking for the commands above for you).

  Here is a link to Chapter 1 of the manual of automation: http://cdn.lecroy.com/files/manuals/04_xstreamautomation_ch1.pdf

  Page 1 - 5 has a quick introduction to the browser and its use.

  I hope that it becomes operational.

  Kind regards

  Leonard Brown

  LeCroy sales engineer

  1-800-5LeCroy

• How to set the power (watt) to resistance?

  How to set the power (watt) to resistance?

  Hello

  What you can do, for the purposes of simulation, is to use the RESISTOR_RATED component (find under the Basic, the RATED_VIRTUAL family group). It is a component of interactive virtual resistance you can use and set the maximum power. If the power is exceeded, it will show you an animation when this happens.

  Best regards

• How to set the parameter of the BIOS under XP?

  I'm trying to boot into the recovery console windows using a bootable XP Recovery console CD. But I do not know how to set the BIOS to achieve this. Can someone give me instructions step by step? Thanks in advance.

  A quick search on Google for

  For Lenovo 3000 change boot sequence

  .. .finds a message in the forum of the Lenovo users who said you choose Start and adjust it.

  I can't check it works, but maybe someone who knows the Lenovo will verify that or tell you what to do.

  It seems like a simple process, but some of the discussions on how to boot from a CD are ridiculously long and full of trail and error.  When you get your job, let know us the good way that works and I'll put it in my notes!

  Here is a link to the Lenovo's Support Page:

  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do?country=us

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!