How to set the cursor to TextField type uses

Similar Questions

• How to set the focus to textfield

  Hello everyone.
  
  Need advice on how to set the focus to textfield. I tried t use setfocus, however does not
  
  Thank you!

  textField.requestFocus ();

• How to set the cursor in the text of a message response

  I use TestStand 4.1.1. During testing, I need to analyze some data of the operator.

  I use a popup message with the response enabled text box. My problem is that the cursor does not automatically appear in the running text box. I don't want to have to put the mouse in the box every time.

  Is there a way to set the cursor to be automatically in the text box.

  Kind regards

  Don1.

  Hello

  You must make the answer box the active control. You will find 'Active Control' control in the main tab of the configuration of Message box Properties window.

  Concerning

  Ray Farmer

• How to set the timeout of read when using channelReader.ReadWaveform?

  I'm using a USB-6210/a. data acquisition, and it works fine until I have to take a longer than 10 s waveform.

  When I take a longer than wave form, I get the error 200284, "some or all of the requested samples are not yet acquired.  To wait for the samples become available use longer read timeout... »

  No problem, I thought, I'll just put a longer period.  I searched through the documentation, and the timeout only I found was the watchdog timeout.  When I wanted a longer value, I get code 200452 State - specific property is not supported by the device or is not applicable to the task.

  I use the code in the example AcqVoltageSamples_IntClk.2008 .net with c# in Visual Studio 2008, .net 3.5 sp1.

  How to set the timeout so that ReadWaveform() is not the time?

  Here is the code:

  privateAnalogMultiChannelReaderchannelReader;

  privateAnalogWaveform awf;

  publicList GetWaveForm()

  {

  Try

  {

  Task getWaveform = newTask();

  getWaveform.AIChannels.CreateVoltageChannel (Channel,"", TerminalConfiguration, RangeMinimum,

  RangeMaximum, AIVoltageUnits.Volts);

  getWaveform.Timing.ConfigureSampleClock ("", SampleRate, SampleClockActiveEdge.Rising,)

  SampleQuantityMode.FiniteSamples, NumSamples);

  getWaveform.Control (TaskAction.Verify);

  channelReader = new AnalogMultiChannelReader (getWaveform.Stream);

  AnalogWaveformdata = channelReader.ReadWaveform (NumSamples);

  AWF = data [0];

  samples As new List();

  for (inti = 0; i)

  returnsamples;

  }

  catch (DaqExceptionexception)

  {

  MessageBox.Show (exception. (Message);

  }

  List of l = newList();

  return l;

  }

  Thank you

  Curt

  Hi Curt,.

  Here is a Knowledge Base that can help you to set the timeout setting in your code:

  The property using Timeout of DAQmx task in Visual Studio

• How to set the cursor does not to meet the opening?

  When Karma rings in my pocket, it always ends slide open like I'm taking it out. This answers the call, the caller is confused until I have finally get the phone to my ear. Worse even if when he slides partially open and then closes in the process, therefore hangs on the appellant. Is it possible I can set the phone to answer when I press the reply button?

  I had the same problem and never found an option to stop the opening of the slide to answer a call.  (Looks like another option that Motorola could include in an update of the firmware... If they ever come out with one.)

  But you can stop the call answer and then hang up.  Go to settings > Intial configuration > Slide closed and assign the task to continue.  At least if you change this setting, the call don't hang up while you get the phone to your ear and your pocket.

• M-30 series: how to set the fast CD keys in use?

  Hi people, I have formatted the hard drive of M - 30 my friend. Everything is very good, except that I can't put the buttons for fast CD use in function (front left). Are there missing drivers?

  Hello

  you installed the Toshiba software utility CD & tools or have you downloaded these files of Toshiba home page?

  AFAIK you need Toshiba, Toshiba easy keys and Toshiba console controls.

  If you have problems again!

  Rudi Bye

• How to set the field as password type entry

  Hello
  
  In display determination Oracle Web interview, I want to Setup text entry as type of password is entered text should be displayed in the form of points/stars. Please tell me how can this be achieved?
  
  Thank you
  Sri

  Create a custom control that have a tag html input type is password.

• How to set the padding for TextField?

  Hello, forum

  Is it possible to put the padding of the TextField, as I put it for LabelField using the setPosition method?

  Thanks in advance,

  Mikhail

  Rather than add the real value of the empty space in the TextField, I suggest to add an empty LabelField before the textfield and line them up according to your requirement using HorizontalFieldManager as you mentioned.

• How to set the cursor focus to an element on a form

  Is it possible to set_focus_to different items on a form according to the choice of options in the radio button group.
  
  So basically I want to control the focus of cursor on the different points on the shape based on the selection of option buttons appears.

  Yes, it is possible, but requires javascript.

  Basically you have an onchange event on your radio group, which checks the changed value and focuses on the corresponding element.

  brgds,
  Peter

  -----
  Blog: http://www.oracle-and-apex.com
  ApexLib: http://apexlib.oracleapex.info
  Work: http://www.click-click.at

• How to set the partition active windows 7 using the command line

  I activated the system recovery partition, so the windows partition is disabled and I can't start Windows

  Partition Wizard Home Edition:
  (There is also a CD bootable version, this allows to change the partition 'Active')
  http://www.partitionwizard.com/free-partition-manager.html
  Some of the features and functions include: resize and move partitions, Partition recovery after an accidental deletion, Create partition, Delete partition, format partition, convert partition, partition Explore, Hide partition, change the drive letter, the active value partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• How to set the location of the active cursor

  I'm having trouble trying to put the asset "x axis" cursor without interrupting the other parts of the code. I have a graph of waveform and I want the window to be properly windowed to zoom in on the interesting part of my data. I also have cursors that I want this particular part of the processed data. Unfortunately when I try to set the cursor position and the display area of the code window will do either one or the other. I tried to change the order of the scale minimum and maximum x and beginning and end cursor x posts... all that I got is different combinations of window size/cursor positioning. I'm confused. Why the property node addresses some items and not others? How can I get my automatic zoom window and my Cursor for self-standing at the same time? Here is an example of the code...

  

  Ignore the rose as downstairs. It is not connected to the property node, it just happens to run behind him and it doesn't bother me to keep it there.

  Any help will be greatly appreciated! Thank you!

  Hello

  I'm not so sure... but why not try to use different structures for each process? Try to use highlight for execution see the order of what is happening in your software and then you could determine if you should use a sequence of plate or structure of the event.

• How to set the alignment of the centre on TextField?

  Hi guys.

  I have not found how to set the alignment of the centre on TextField?

  Do you know how to set the alignment of the centre on TextField?

  Please share your knowledge.

  Thank you.

  Hello

  Hope this will help you

  Import net.rim.device.api.ui.component.BasicEditField;

  class CustomTextField extends BasicEditField {}
  {CustomTextField()}
  Super(BasicEditField.FIELD_HCENTER |) BasicEditField.FIELD_VCENTER);
  }
     
  public void layout (int width, int height) {}
  Super.Layout (getPreferredWidth (), getPreferredHeight ());
  setExtent (getPreferredWidth (), getPreferredHeight ());
  }
     
     
     
  public int getPreferredHeight() {}
  System.out.println("---");
  beginning 50;
  }
     
  public int getPreferredWidth() {}
  System.out.println("###");
  Back to 120;
  }
     
  }

  Now in your class that extends the screen or full screen add this class object.

• How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  Thank you very much for your help, if necessary.

  Quite a few questions, send, but I will do what I can to answer them.

  I recommend first to buy a router, even if it's one you won't connect to internet and it network with others your PC and printer. This will give you the best features and the results of what you're trying to do.

  In addition, the automatic stop of the printer function can be disabled and is not affected by the type of connection. Usually, you can go through the configuration Menu and select tools to change the options there on the energy saving features.

  Finally, the auto off function on your computer is a Windows question, but one easy answer. If you're on a laptop, you can right click on the battery in the tray (lower right corner) and change the settings for energy conservation.

  You might be better off installing the printer via the USB cord and alternately inspiring when you use it, but which is not optimal if you are printing only a few documents on an irregular basis. A network connection is the easiest to manage across multiple computers, honesty, but you have certain requirements for this connection and limits as well.

  I hope this information is useful!
  

• How to set the volume slider back to ding is the default beep?

  Hi for some reason any my system set the slider to ding for the system beep. I tried for days and tried everything I could find online. Any ideas how to move the cursor back to ding is the default beep?

  Hi Dave,.

  You can set the default Windows system to check the issue.

  a. click Start. Click on Control Panel.

  b. Double click sounds, speech, and Audio devices. Click the sounds tab.

  c. Select Windows default under model of sounds. Click OK.

  You can also create your own sound scheme.

  Microsoft Windows XP - create a sound scheme

• How to set the dependency?

  Hi, I created two projects in the framework still a draft package is based on another medium he uses this project with the class. I am therefore unable to build the project.  In the samples under folder browser 'BrowserFieldDemo' and 'commonlib' of projects with the same addiction they began compiling correctly.  But iam unable to set the dependency it please tell me how to set the dependency.

  My project folder structure:

  com\adea\blackberry

  -Project1

  ------------------------File1

  ------------------------File2

  -project2

  ------------------------File1

  ------------------------File2

  Thanks and greetings

  Sunil.G

  Set the type of project that will be used by another project like 'library '.

  And this library project will be available for you to create dependencies.

  http://picasaweb.Google.com/tbilisoft/BlackberryForum#5275894851814275858