How to set the digital format via the API

Similar Questions

• How to set the image of the project format

  Newbie question: I create a video from various sources. Some sequences are 1280 x 720, other clips from old DVD, whose size is 642 x 480. The first clip I have loaded in my project is the old (642 x 480 pixels), it seems because I loaded the small clip in the first place, the whole project is that report width / height. So now when I try to bring new clips, they get cropped. How to set the size to 1280 x 720? It's ok, if there is black bands around the small clips. Thank you

  I use first Pro CC on Mac OS 10.9.5

  Select your sequence in the project Panel, and then open it by going to sequence/sequence settings in the menu dropdown.

  Now change the custom output Format.

  Now, you will be able to change the settings.

• How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  Thank you very much for your help, if necessary.

  Quite a few questions, send, but I will do what I can to answer them.

  I recommend first to buy a router, even if it's one you won't connect to internet and it network with others your PC and printer. This will give you the best features and the results of what you're trying to do.

  In addition, the automatic stop of the printer function can be disabled and is not affected by the type of connection. Usually, you can go through the configuration Menu and select tools to change the options there on the energy saving features.

  Finally, the auto off function on your computer is a Windows question, but one easy answer. If you're on a laptop, you can right click on the battery in the tray (lower right corner) and change the settings for energy conservation.

  You might be better off installing the printer via the USB cord and alternately inspiring when you use it, but which is not optimal if you are printing only a few documents on an irregular basis. A network connection is the easiest to manage across multiple computers, honesty, but you have certain requirements for this connection and limits as well.

  I hope this information is useful!
  

• How to set the Date and time on a remote target in Measurement & Automation Explorer (MAX)?

  Hello

  I'm trying to follow the steps described in the following link:

  How to set the Date and time on a remote target in Measurement & Automation Explorer (MAX)?

  It is said

  The software on the target currently supports only the time zoneand deletes the old files?

  I need set the date and time

  and remove all the old unwanted files

  the calendar was gray does not allow me to change the current date.

  Anyone know how to change

  

  

  Hi all!

  According to this the below Knowledge Base article, Remote Configuration System Support must be installed on the target for time settings to change in MAX.

  http://digital.NI.com/public.nsf/allkb/FAB0EC4D6E5EE0F386257738005733A3?OpenDocument&MeTC=max_MAXDat...

  If you don't know what version of the system supported remote Configuration software that you have installed on your device target, it is likely that it is not yet installed. Add this software by clicking below your target to the MAX software option and selecting "Add/Remove Software". This is where you will install the System Configuration Remote Support software.

  Please let us know if you have any questions!

• How to set the time stamp for incoming mail?

  How to set the time stamp for incoming mail?  I have windows vista. I use hotmail/windows live email. My computer has the time is set correctly. My e-mail timestamps incoming messages 7 hours a head of real time. Example: it is now 09:48. A new email is stamped as to settle at 16:48. How can I fix it? Note: the computer is correct.

  Thank you
  Laura
  2.13.2012

  If you mean the customer of email Windows Live Mail, the time stamp on messages is governed by your time zonesystem. Right-click on the clock in the lower right of the screen and select CONFIGURATION... Change your time zone, and then set your clock at the present time.

  If you are talking about the Windows Live Hotmail service, the time zone (s) used are those contained in your account data. Reach
  https://account.live.com/EditProf.aspx
  and change the time zones for the good...

  Windows Live programs and services have their own forums for support at the Windows Live Solution Center. Please address any questions you may have about Windows Live Mail to one of the forums on the right side of this page. For Hotmail, forums and responses are available via this page.

  Noel

• How to set the size of default when page scan document in

  How you set the default page size in the analysis in the document

  I found the answer in the Acrobat/kb/scanning-letter-size-documents-results-in-legal-PDF

  It's in PDF format by Scanner > Scan button click Options customized to the right of the name of the scanner.

  From here he choose Show the Scanner's Native Interface.   Then choose the correct page size

  which is shaded on so I couldn't choose.  It worked in all cases.

  I have Acrobat XI and Photosmart HP 7520.   Thanks for the replies.

• How to set the alignment of the field in a table in jdev 11.1.2.3?

  Hello
  How to set the alignment of the field in a table in jdev 11.1.2.3?
  for example: to display a body of numbers in a table as right aligned.
  I tried to put field (amount) VO UI Hint Format Type: Number; Format: 0000.00
  and jspx, flowing, but it doesnot work.
  Thank you.
  Bao
  
  < af:column sortProperty = "#{bindings." VO1.hints.amount.name}.
  sortable = "true".
  headerText = "#{bindings." VO1.hints.amount.label}.
  ID = "c44" width = "60".
  Align = "center" >
  < af:inputText value = "#{row.bindings.Amount.inputValue} '"
  label = "#{bindings." VO1.hints.amount.label}.
  required = "#{bindings." VO1.hints.amount.mandatory}.
  columns = "#{bindings." VO1.hints.amount.DisplayWidth}.
  maximumLength = "#{bindings." VO1.hints.amount.precision}.
  shortDesc = "#{bindings." VO1.hints.amount.ToolTip}.
  ID = "it58.
  secret = "false".
  inlineStyle = "" text-decoration: overline; ">"
  < f: validator binding="#{row.bindings.Amount.validator}"/ >
  < / af:inputText >
  < / af:column >

  Hello
  To set a field right alignment in a table:
  It doesnot work when InlineStyle-> text-align: right;
  It works when ContentStyle-> text-align: right;

• How to set the display in order to run the installation program

  Hello
  
  Could you please explain how to set the Display variable I connect via the VNC client directly to windows X Linux (Gnome)
  in order to run the installer to install R12 EBS?
  
  
  I guess that since the connection is by VNC client, so I just need to open a terminal window and start the Installation...
  
  
  
  Thanks and greetings
  MZ

  Srini Chavali wrote:
  The DISPLAY variable must be set to the IP address of the client.

  Not necessarily - it is meaningless to set the DISPLAY of different client IP addresses if you want to run the installation program (or any GUI) on the server of different customers.

  Thank you
  Hussein

• How to set the slideshow to revel on ipad speed?

  How to set the slideshow to revel on ipad speed?

  Concerning

  Reg

  Hello

  Currently, there is not a way to adjust the speed of the slide show. Is there any options at all, except push play and enjoy the slideshow. I presented this as a feature request already to our product team I'll add another vote for you.  We work very hard to provide more capabilities and expand on new platforms, devices and file formats.

  Scott

• How to set the pixels for the softer - edge, in a design? I use PhspCS5 TRIAL grateful for help!

  First of all, I'm not a rather advanced digital artist know the tools of basic (a bit) and I'm pretty good with those who, over the years, however, have a new Mac and better

  visibility for sure and an ASSESSMENT of PSHP CS5 Extended version; what I'm asking is: how to set the pixels... to achieve the softer contour for example. I have

  greeting card templates and is now working on a Christmas tree, with gold stars, they better look (vy-light = blk) but when I ZOOM IN I see the ' wavy lines

  pixels, which appear on the 'place '.  I would like to know how to set the pixels * 1 # and then with respect to colors, when I take a yellow (there are many! yellow!)

  and use my Intuos "tap tap tap" pen drawings (yellow), it does NOT save... (he did it on my other computer and CS4 more aged).  So going

  back to my swatches of color, of... .remember just what yellow I took... ha ha... can be: "not so fast!"

  I buy this subscription at the end of the trial and my bet is that the color picker / working on the purchased version when I "tap tap" to pick up the

  same color II had chosen.  Wouldn't it be good to have a monitor of sorts that says you, what color (s) is used when you need to know, to go

  on the 'design' say after a break for tea, etc.  ?????  (    :

  I save my drawings when facts JPEGs and see now, there's a JPEG 2000... I don't know what it is all about.  I save pdf (1) and a jpeg.  Hope that this sounds

  like what we "do"... When we know much more than me.

  And finally, what program or tool, can a use to put a 'framework' (border) around an eg: 5 x 7 design (again, my goal is for my greeting cards designs.  Are there

  another of Adobe products, I would have to do this.  Free hand has not worked so well, so far.

  I'm in advance, so grateful to you - anyone you may, for your help.  I'm on my way 'Hooray' last now in the hope of success soon... I am a senior of 71

  and so feel I have to really "go there" and learn these basics to ensure my chances of success, at least. Thank you, thank you & thank you! CDW

  Please post in the Photoshop forum.

  http://forums.Adobe.com/community/Photoshop

  Bob

• How to set the page template for a page in app

  I've been looking for a way to re - assign a specific page to a different page template, and I must be blind. I did it with the regions and reports, but never a whole page. The closest I can find is how to set the default page for an application model template. What I have is a printable form that they want in a specific format. I was able to code the whole thing into a region of PL/SQL, but I was hoping that I could take an existing page template and modify the model to different regions in the areas I would like to.
  
  Can someone help me find this? I have already created a copy of the page template I want to twist.

  If you are in the tree view, double-click the entry of title of page (top); If you are in the component view, simply click the edit button in the page area. Either way will take you to the screen of the Page change. in the display attributes section, you will see a Page Model drop-down list.

  -David

• How to set the value of a field from the LOV of another field.

  I'm trying to figure out how to set the value of a field (P_PROGRAM) to the value of another field of based lov (P_STATE).
  
  The P_PROGRAM field is a hidden field. The P_STATE field is a required field and is based on a list of values for the State Codes.
  
  When a user selects the State to P_STATE, the field of the P_PROGRAM should be set to this value, as well.
  
  I tried different ways to get there via a function call on the post for the calculation of the field P_STATE, defining the source P_PROGRAM to the value of the page item P_STATE put varialbles, creating a process before SENDING, and they all still come back as having a NULL value for P_PROGRAM, therefore impossible to create the file in the db as the PROGRAM is a mandatory field in the table.
  
  Can you please help? Thank you, Laura

  Laura,

  It is always helpful if you provide information about the Apex version you are using. The Apex 4 you can use Dynamic Actions to achieve this. In earlier versions is possible using processes to submit or javacsripts, as well.

  Heres how you do in 3.x with treatment to submit, to make it work in 4.0 as well.

  1 do the P_STATE ' select list submits the Page.
  2. Add a calculation on the point P_PROGRAM, or write to him assign a value based on a process. The treatment should be OnLoad after the header
  3. If the page does not have an unconditional branch that loops on itself, add a. NOTE: The direction must be the last branch (larger sequence number) and should have checked "Save Session State".

  This is what will happen
  a. when the State is selected Page will be submitted
  (b) it will take the unconditional branch to himself and save the value of P_STATE
  c. the calculation process / fills the value of the P_PROGRAM element when the page reloads

  Kind regards

• How to set the size of column sqlplus.exe?

  SQL> select * from dba_cons_columns where user='USER1' and table_name='PARENT1';
  
  OWNER                          CONSTRAINT_NAME
  ------------------------------ ------------------------------
  TABLE_NAME
  ------------------------------
  COLUMN_NAME
  --------------------------------------------------------------------------------
    POSITION
  ----------
  USER1                          PARENT1_PK
  PARENT1
  COL2
           2
  
  
  OWNER                          CONSTRAINT_NAME
  ------------------------------ ------------------------------
  TABLE_NAME
  ------------------------------
  COLUMN_NAME
  --------------------------------------------------------------------------------
    POSITION
  ----------
  USER1                          PARENT1_PK
  PARENT1
  COL1
           1

  It seems little ugly to see these data. Why the length of the column is so long? Please tell how to set the length of columns and other settings so that the displayed data should come out in the form of a well managed and beautiful way.
  Like this:
  

  OWNER     CONSTRAINT_NAME     TABLE_NAME       COLUMN_NAME   POSITION
  -----------     ----------------------------     ------------------        ---------------------    --------------
  USER1        PARENT1_PK              PARENT1             COL2                  2
  USER1        PARENT1_PK              PARENT1             COL1                  1

  I wrote this by hand. How do I get the display to sqlplus.exe?

  Easiest would be to use the command column format and also the linesize option.

  sql>column column_name format a30
  sql>set linesize 300
  

  The order of column would make the display limited to 30 characters only. Also the linesize enlarge the display. Try it and see what it looks like?

  HTH
  Aman...

• How to set the content of the column for lines of automatic separation

  Hello guys,.
  
  I have a problem with the column width and the content of column in a standard report. In the report are hugh entries that are not interrupted by a space character. I put my column width to a special value by usingen "style css: display block; Width: 300px; ». Now the problem is that some of the entries in the column with a longer width that the column width is set. Then they overlock the entries in the column next to them.
  
  My question is: How to set the column lines of automatic content break after a certain number of characters?
  
  After searching for a couple of websites and discussion thread, I found maybe a reference to the solution. I hope that it helps you to give me an answer.
  
  A4 FORMAT LAST_NAME COLUMN
  */*
  
  concerning
  
  wderr

  Wderr,

  It is more a matter of HTML as a matter of APEX... You can start by looking here:
  http://www.456bereastreet.com/archive/200704/how_to_prevent_html_tables_from_becoming_too_wide/

  Kind regards
  Dan

  Blog: http://DanielMcGhan.us/
  Work: http://SkillBuilders.com/

• How to set the number of e-mail messages that are stored on my iPhone

  How to set the number of e-mail messages that are stored on my iPhone – so when I don't have a network connection I can see a 'large' number of messages in my Inbox etc.

  This is series is not defined in the world

  You must go to settings-> mail, contacts, and calendars and check the settings of your e-mail provider offers in this area

• How to set the time that my screen stays on?

  How to set the time that my screen lights up.  I have an iPod Touch 6?

  Settings > general > auto-lock