HOW to: Set the expiration date for the ThinApp package

Similar Questions

• How to connect an expiration date in the ID and the password set cached?

  I have windows 2003 race. I would like to know if there is any kind of code and where it must be added have log vpn users in the local network before they user of the laptop to go on the web?

  In other words, how I plug in and the expiration date for the caching of id and password?

  I'm not sure that's what you want.  You can change your machine such as passwords are cached at all, but then a person could not connect to his laptop unless it is connected to your domain, when it connects (forget not to use your computer on a plane).  If you want to control access to the internet, many businesses use a Proxy Server with a password to regulate the internet connection.  See if these MS articles shall apply:

  "Caching of security credentials in Windows Server 2003, Windows XP, and in Windows 2000"
    <>http://support.Microsoft.com/kb/913485 >

  "Cached domain logon information.
    <>http://support.Microsoft.com/kb/172931 >

  HTH,
  JW

• How to set the date and time on my HP Officejet pro 8600 more?

  How to set the date and time on my HP officejet pro 8600 more?  It just on a printed journal Jan-oo-oo fax shows 00:00 AM.  There are no instructions on how to change this.  I need proof that I sent a fax to a certain date and time.  Help, please.  Thank you

  Hello

  Below are the steps to set the Date and time for your device:

  1. On the Control Panel, press the right arrow key ( ), press Setup ( ).

• How to set the default value for the digital control on front panel?

  How to set a default value for a numeric control of LabVIEW 2009 Front Panel? I have several input values that are actually configuration settings I want to settle with the default values of zero. I want them to be the values displayed when the façade first appears until the code is executed.

  I really want to use the Minimum and Maximum limits by default for this because I still want to be able to define acceptable limits for values.

  I would not be able to specify a default value of zero for these entries?

  Enter the desired value, then "right click...... of default data of value to operations. Save the VI.

• How to set the Date and time on a remote target in Measurement &amp; Automation Explorer (MAX)?

  Hello

  I'm trying to follow the steps described in the following link:

  How to set the Date and time on a remote target in Measurement & Automation Explorer (MAX)?

  It is said

  The software on the target currently supports only the time zoneand deletes the old files?

  I need set the date and time

  and remove all the old unwanted files

  the calendar was gray does not allow me to change the current date.

  Anyone know how to change

  

  

  Hi all!

  According to this the below Knowledge Base article, Remote Configuration System Support must be installed on the target for time settings to change in MAX.

  http://digital.NI.com/public.nsf/allkb/FAB0EC4D6E5EE0F386257738005733A3?OpenDocument&MeTC=max_MAXDat...

  If you don't know what version of the system supported remote Configuration software that you have installed on your device target, it is likely that it is not yet installed. Add this software by clicking below your target to the MAX software option and selecting "Add/Remove Software". This is where you will install the System Configuration Remote Support software.

  Please let us know if you have any questions!

• How to set the time stamp for incoming mail?

  How to set the time stamp for incoming mail?  I have windows vista. I use hotmail/windows live email. My computer has the time is set correctly. My e-mail timestamps incoming messages 7 hours a head of real time. Example: it is now 09:48. A new email is stamped as to settle at 16:48. How can I fix it? Note: the computer is correct.

  Thank you
  Laura
  2.13.2012

  If you mean the customer of email Windows Live Mail, the time stamp on messages is governed by your time zonesystem. Right-click on the clock in the lower right of the screen and select CONFIGURATION... Change your time zone, and then set your clock at the present time.

  If you are talking about the Windows Live Hotmail service, the time zone (s) used are those contained in your account data. Reach
  https://account.live.com/EditProf.aspx
  and change the time zones for the good...

  Windows Live programs and services have their own forums for support at the Windows Live Solution Center. Please address any questions you may have about Windows Live Mail to one of the forums on the right side of this page. For Hotmail, forums and responses are available via this page.

  Noel

• How to get back my data for the health and the watch Apps once I've restored my phone?

  How to get back my data for the health and the watch Apps once I've restored my phone?

  From the backup, you're going to be restoration.

  If you back up to iTunes, make sure that it is an encrypted backup.

• How to set the path of the report in a plugin for model

  I'm trying to figure out how to set the path of the report in a plugin process model. I can't find a way to have access to it. It seems this would be a reasonable thing to do since the plug-ins are for the treatment of the results. Does anyone know how to do this? We generally use the sequential process model, but I try to keep my plug-in as independent as possible.

  Thank you.

  If I understand correctly, you want your plug-in, when enabled, change the settings of all other instances of the report OR plugin as their reports share the same directory that your plug-in is configured to use.

  If so, your plug-in can access and change the settings of all other instances of plugin. All instances are passed to all the points of plugin entries in the subproperty of the plugins of the ModelConfiguration parameter table. You can browse this table. Any element of the array with an equal to "NI_ReportGenerator.seq" Base.SequenceFilename is an instance of the report OR plugin. Its report options are stored in the element under PluginSpecific.Options.

  You can change the report options to what you want. Note that the recall of the ReportOptions model is called from template-plugin Initialize entry point, then you might want to ensure that your changes are applied after that, so they are not replaced. To do this, you could make your changes in the Initialize entry point of your plugin and make sure your plugin runs last. To rotate the last, you can set the FileGlobals.ModelPluginComponentDescription.Default.Base.RunOrder in your file of plug-in with a value greater than 0, for example 1.0 (see Help for TestStand > Fundamentals > process template Architecture > plug-in for the model process Architecture > Structure of the plugin sequence files > plugin model of entry Points > Order Execution of Point of entry at run time).

• How to set the Destination of scanning for your Hp Printer in window - 7

  How to set the scanning for your printer Destination is a common question is asked.  I am including a useful video that will guide you in the process.

  I hope this video helps.

• How to set the zoom settings menu for lecroywaverunner 6050A

  Hello

  I am trying to initialize the zoom settings of a track of the labview on a Lecroy WaveRunner 6050 A fft. I found how to set the parameters of the fft with the manual of the remote control for LeCroy scopes  http://cdn.lecroy.com/files/manuals/wm-rcm-e_rev_d.pdf ) but I have not found how to set the menu zoom settings.

  I also tried with find command using the command of automation of Lecroy. ( http://cdn.lecroy.com/files/manuals/automation_command_ref_manual_wr.pdf ). but I think that there is a problem with the settings of the commands I send to the scope.

  I just need to put the horizontal and vertical centers and scales.

  If anyone can help,

  Thank you.

  Hello

  I use F1 as my FFT here track.

  Commands to change the scales are:

  Vertical Center: VBS ' app. Math.F1.Zoom.VerCenter = XXXX"

  Portrait/div scale: VBS ' app. Math.F1.Zoom.VerScale = XXXX"

  Horizontal at the Center: VBS ' app. Math.F1.Zoom.HorCenter = XXXX"

  Horzontal scale/div: VBS ' app. Math.F1.Zoom.HorScale = XXXX"

  I also want to point you to an application on the scope that will help you.

  If you go to the file menu and select cut, to the office, there is a shortcut to an application called "XStream Browser"

  The browser is an interactive application that will present all automation methods and properties that are available on the scope.  He acually connects to the scope of the request, so you can use it to test various components to see what they do on the scope.  It is very intuitive and I use it exclusively. (this is where I went looking for the commands above for you).

  Here is a link to Chapter 1 of the manual of automation: http://cdn.lecroy.com/files/manuals/04_xstreamautomation_ch1.pdf

  Page 1 - 5 has a quick introduction to the browser and its use.

  I hope that it becomes operational.

  Kind regards

  Leonard Brown

  LeCroy sales engineer

  1-800-5LeCroy

• How to set the clock for the hours, minutes, and seconds with Windows XP

  How to set the clock for the hours, minutes, and seconds with Windows XP

  I don't know of your question.  If you ask how to show the clock in the tray system with hours, minutes and seconds, then download & run "Tclock Light".  Windows will not natively display the seconds.

  TClock Light: <> http://homepage1.nifty.com/kazubon/tclocklight/index.html >

  HTH,
  JW

• How to set the date and time on an hp j5780?

  I need to know how to set the date and time on an HP j5780!

  Help!

  Thank you very much, we did it!

  WY

• How to set up an account for another user of my PC (Windows Vista) and give its right of administrator to download the program

  My daughter helped me to set up an account to my own PC with password protection. Please indicate how to set up another account for someone and give it the administrator right to download the program.

  There is information about the configuration of the accounts here:

  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-understanding-user-accounts

• How to set the current date in the datetimepicker in qml?

  Hello

  Can I know how to set the current date in the DateTimePicker in QML?

   DateTimePicker {
                      id: datePicker
                      mode: DateTimePickerMode.Date
                      title: "Date"
                      value: "2013-11-20"
                      maximum: "2013-11-20"
                  }
  

  Container {
      DateTimePicker {
          id: picker5
          title: "DateTimeQml"
          mode: DateTimePickerMode.DateTime
          value: { new Date(); }
      }
  }
  

• "How to set the measuring tool onto the foot of measure in inches, for example 10'4"

  "How to set the measuring tool onto the foot of measure in inches, for example 10'4"

  Hi jacobj89654320,

  You will need Acrobat application for this, please refer to this KB document for details https://helpx.adobe.com/acrobat/using/grids-guides-measurements-pdfs.html.

  Kind regards

  Nicos