How to set the focus on the field?

Similar Questions

• How to set the field "default" of a quick dashboard to yesterday?

  Hello world
  
  I have a dashboard the guest on a date (full name Date.Date and type Date).
  I also have a simple report with two columns: Date.Date and a measure (whatever the name).
  
  I've managed to filter the day before the current date in the report by adding an advanced SQL filter:
  Date.Date = Cast (TimestampAdd(SQL_TSI_DAY,-1,@{system.currentTime}) as Date)
  
  Now, I would like to invite him to select the day before the current date by default.
  The filter on Date.Date would be "invited" or more.
  
  How to set the field "Default" from the command prompt?
  
  Thanks in advance

  Hello

  go to the command prompt...
  Select SQL results of as default: drop-down list.
  here... you have to write your SQL logic...
  who uses by default the previous date
  something like that...

  * Select case when 1 = 0 then anydate column of another timestampadd (sql_tsi_day-1, CURRENT_DATE) of the end SubjectArea name*.

  write like this... and report back...

  Thank you & best regards
  Kishore Guggilla

• How to set the field date as required field on UI - urgent

  Hello
  
  I got how set the date as field demands presented on the page.
  
  Below is the code I used, but giving it as class cast exception.
  
  
  MO OAMessageTextInputBean = (OAMessageTextInputBean).webBean.findChildRecursive ("dateFiled");
  mb.setRequired ("yes");
  
  Please help on this. for the other beans messagechoice it works fine. but only for the data type DATE gives classcast exception

  Try this

  MO OAMessageDateFieldBean = (OAMessageDateFieldBean) webBean.findChildRecursive ("dateFiled");
  mb.setRequired ("yes");

  Thank you
  Shree

• Documaker: How to set the field of the 2D matrix

  Hello
  
  I created a matrix 2D field, but is not a 2D matrix...
  You may notice that it is false?
  
  Policy ID: Data Matrix for Documaker (dm___.ttf)
  Type: Bar Code
  Length: 32
  Format: Data matrix
  Symbol size: 18 * 18
  Scale: 1
  Rule: XDD
  Source name: xxxxxxx
  
  Example of XML is as follows.
  
  < code >
  < xxxxxx > 12345678901234567890123456789012 < / xxxxxxx >
  < / bar code >
  
  In the test, this field is output as follows...
  
  AIHPBMGKHJENFPFKDK
  AHFMCKOBPOEONLALIK
  ALJLFFJMANLMMJAEBK
  AGFCPMJOBELOEIKFCK
  DDLDDDDDLLLLDLDDDL
  
  I can output the barcode with the "1:1:2:2 Code 39".
  Please help me.
  
  Thank you

  If you are talking about the screen, you also have to install TTF fonts to let Windows know to to use. The location in the fonts directory, would only affect that print them in PDF format when you download fonts.

  Find the. TTF file on disk, right-click on it and choose Install. If you do not see the offer to install in your version of Windows, you may need to go to the control panel and choose fonts. Check the list to see if Data Matrix for Documaker has been installed. If you don't see it in the list, then check the offerred help by Windows, how to install a font on your system.

• How to set the field as password type entry

  Hello
  
  In display determination Oracle Web interview, I want to Setup text entry as type of password is entered text should be displayed in the form of points/stars. Please tell me how can this be achieved?
  
  Thank you
  Sri

  Create a custom control that have a tag html input type is password.

• Satellite C660 - how to set the focus of the webcam?

  Hello

  Just bought this laptop, the built-in webcam looks very blurry when I use Skype. Does anyone know how to set the focus to the subject?

  See you soon
  Jules

  Hello

  to be honest, I have no idea on your model of lap... Try to update driver webcamd and play with Skype video settings.

• How to set the render property of the field on one facet of panelSplitter?

  Hi, experts,
  In jdev 11.1.2.3,.
  How to set the render property of the field on one facet of panelSplitter?
  -If the panelSplitter is reduced then make some fields in the second pane. otherwise, do not make these fields.
  
  It is not an easy job for me to set the EL expression.
  Thank you.

  OK, just did a small test case. It turns out that the difficulty is to automatically update the fields when the separator discloses. To add a pair of earphone client/server. This sends the event to disclose to the bean to update the fields.
  Page code:

  
  
    
    
      
        
          function disclosePanelSplitter( event) {
              var inputComp = event.getSource();
              AdfCustomEvent.queue(inputComp, "myDiscloseEvent",
              {}, true);
          }
        
        
          
            
              
                
              
            
            
              
                
                  
                    
                    
                      
                    
                    
                    
                    
                  
                
                
                  
                    
                    
                      
                        
                        
                        
                        
                        
                      
                    
                    
                    
                    
                  
                
                
              
              
            
          
        
      
    
  
  

  and the corresponding bean to the scope of the request

  package de.hahn.xyzxyz.view.panelsplitter;
  
  import oracle.adf.view.rich.component.rich.layout.RichPanelSplitter;
  import oracle.adf.view.rich.context.AdfFacesContext;
  import oracle.adf.view.rich.render.ClientEvent;
  
  public class PanelSplitterBean {
      private RichPanelSplitter panelSplitter;
  
      public PanelSplitterBean() {
      }
  
      public void setPanelSplitter(RichPanelSplitter panelSplitter) {
          this.panelSplitter = panelSplitter;
      }
  
      public RichPanelSplitter getPanelSplitter() {
          return panelSplitter;
      }
  
      public void doCustomEvent(ClientEvent event)
      {
          AdfFacesContext.getCurrentInstance().addPartialTarget(panelSplitter);
      }
  
  }
  

  Timo

• How to set the alignment of the field in a table in jdev 11.1.2.3?

  Hello
  How to set the alignment of the field in a table in jdev 11.1.2.3?
  for example: to display a body of numbers in a table as right aligned.
  I tried to put field (amount) VO UI Hint Format Type: Number; Format: 0000.00
  and jspx, flowing, but it doesnot work.
  Thank you.
  Bao
  
  < af:column sortProperty = "#{bindings." VO1.hints.amount.name}.
  sortable = "true".
  headerText = "#{bindings." VO1.hints.amount.label}.
  ID = "c44" width = "60".
  Align = "center" >
  < af:inputText value = "#{row.bindings.Amount.inputValue} '"
  label = "#{bindings." VO1.hints.amount.label}.
  required = "#{bindings." VO1.hints.amount.mandatory}.
  columns = "#{bindings." VO1.hints.amount.DisplayWidth}.
  maximumLength = "#{bindings." VO1.hints.amount.precision}.
  shortDesc = "#{bindings." VO1.hints.amount.ToolTip}.
  ID = "it58.
  secret = "false".
  inlineStyle = "" text-decoration: overline; ">"
  < f: validator binding="#{row.bindings.Amount.validator}"/ >
  < / af:inputText >
  < / af:column >

  Hello
  To set a field right alignment in a table:
  It doesnot work when InlineStyle-> text-align: right;
  It works when ContentStyle-> text-align: right;

• How to set the focus to textfield

  Hello everyone.
  
  Need advice on how to set the focus to textfield. I tried t use setfocus, however does not
  
  Thank you!

  textField.requestFocus ();

• How I set the value of a dynamic text field row

  I have a repeated line form that contains a button and several text fields.  There is a text field (input field) above with some information I want to place in the table and several buttons that I want to read the value of and defined on the table.  Excuse me there are several questions I have and I use pseudocode to describe.

  Top shape resembles

  InputField

  | ButtonX1 | ButtonY1 | DescriptionX1 (read the text only field)

  ...

  | ButtonXn | ButtonY1 | DescriptionXn

  OutputRow looks like

  | ButtonOutput | OutputField1 | OutputField2 | OutputField3 |

  So, I want to do

  ButtonX1.click

  {

  OutputTable.OutputRow.addInstance (true) //this works - everything I have questions on

  OutputTable.OutputRow.OutputField1.rawValue = DescriptionX1.rawValue

  /*

  Question 1

  How should I address the location of each table to set a value

  Question 2

  How can I get the value of the description field in the same row as button and table

  I would like to say something to the effect of the OutputTable.OutputRow [?]. OutputField1.rawValue = this.parent.DescriptionX

  */

  OutputTable.OutputRow.OutputField2 = InputField.rawValue

  /*

  Same question as above - how can I specify a dynamic line - it's the syntax appropriate for obtaining the value of the input field?

  */

  OutputTable.OutputRow.OutputField3 is this. ButtonLabel

  /*

  Question 3

  How can I get the value of the label of the button to set the field

  There should be a lot of these buttons and buttons will be added - I'd rather set the value based on the label of the button to facilitate value - not requiring only not to change the code

  */

  Issue 4--unrelated to those at the top.

  Is it possible to build the first table

  | ButtonX | ButtonY | Description |

  from a XML file.  I've seen examples showing how to build if it's just data, but XML can be pushed into a form with the code to perform the above actions?

  Glad you figured it out... nothing wrong with doing it this way.

  Normally XML contains data and no default legends these xml files are bouond to the rawValue property. You can enable the dynamic linking and other properties of the object will be bindable (they appear as links) in the user interface. If you click on the link to legend an Assistant appears allowing you to bind the node in the XML file.

  Paul

• How to set the focus

  Hai

  Say like page of connection in onload, the cursor should focus in the box, how to set the focus?

  Second, even connect click on the connection through properties of the keyboard button, if I click enter on the keyboard it should connect

  How to have the keyboard properties in flex?

  Can someone help me

  Thanks in advance :-)

  for logging by using the... button you can add eventlistenrer to the area of particular text... example...

  ti.addEventListener (KeyboardEvent.KEY_DOWN, EnterKeyEvent);

  private function EnterKeyEvent (event: KeyboardEvent): void
  {
  if(Event.keycode == 13)
  {
  do something
  }
  }

• How to set the value of a field from the LOV of another field.

  I'm trying to figure out how to set the value of a field (P_PROGRAM) to the value of another field of based lov (P_STATE).
  
  The P_PROGRAM field is a hidden field. The P_STATE field is a required field and is based on a list of values for the State Codes.
  
  When a user selects the State to P_STATE, the field of the P_PROGRAM should be set to this value, as well.
  
  I tried different ways to get there via a function call on the post for the calculation of the field P_STATE, defining the source P_PROGRAM to the value of the page item P_STATE put varialbles, creating a process before SENDING, and they all still come back as having a NULL value for P_PROGRAM, therefore impossible to create the file in the db as the PROGRAM is a mandatory field in the table.
  
  Can you please help? Thank you, Laura

  Laura,

  It is always helpful if you provide information about the Apex version you are using. The Apex 4 you can use Dynamic Actions to achieve this. In earlier versions is possible using processes to submit or javacsripts, as well.

  Heres how you do in 3.x with treatment to submit, to make it work in 4.0 as well.

  1 do the P_STATE ' select list submits the Page.
  2. Add a calculation on the point P_PROGRAM, or write to him assign a value based on a process. The treatment should be OnLoad after the header
  3. If the page does not have an unconditional branch that loops on itself, add a. NOTE: The direction must be the last branch (larger sequence number) and should have checked "Save Session State".

  This is what will happen
  a. when the State is selected Page will be submitted
  (b) it will take the unconditional branch to himself and save the value of P_STATE
  c. the calculation process / fills the value of the P_PROGRAM element when the page reloads

  Kind regards

• Question on how to set the position of the field.

  Is there anyway to set the field position TOP of the screen as Screen.setTitle (Field)?

  My problem is when I add my Manager (who has a backgrond color) for the title. I see a gray line between the title and the body region (the body has a background color even my manager), so I did ' t like it.

  Reason I want to 'FIX' my manager at the top of the screen position is I want to see my manager every time I scroll the screen each time as setTitle().

  THX in advance

  -Maz-

  Try using setBanner() instead of setTitle(). I think that the banner does not normally include a field separator (which is what this line gray).

• How to set the height width for an Image field in a web App?

  I have a webApp to save the image of user with description, title. But when I display all items pictures are great, I want to know how to set the height and width for images?

  Hello

  To do this properly, you need to resize the image. Prefably before you put it in British Colombia. While you can to scale the image in CSS, you don't want to do. Why? Because the images are still very large and probably not optimized properly for the web.

  This means that the page with these images will take a long time to load for people, and people will not be happy on the display of your site.

  You must use a software such as photoshop, if you or iphoto on a mac for example for editing, crop and size of the images before uploading. If you do everything you can use free web based tools such as this one:
  http://Pixlr.com/editor/

  You can also do in British Colombia itself in the file manager. If you click on the image you can see options to resize. The downside to this is's done it by pure mathematics. He doesn't know what is in the picture and the results can make the image etc. shrivelled.

• How to set the properties of the individual parcels programmatically?

  Hi all

  I develop a XY chart that can have between one and six serial data.  How can I programttically set the properties of the series individually?  I can create a property node for things such as 'Name', but when I do it's only the name of the last data series is changed.  How can I set the value of 'Name' for different series?

  Thank you!

  You must set the field property Active before you set the Name property of draw.  The plot Active area must be on the index of the series you want to change.

• How can set the background color of the status bar?

  Quote from the old forum:

  Comments: comments	How can set the background color of the status bar? Posted the: July 17, 2008 02:56
  	How can set the background color of the status bar? Using this code for the status bar: LabelField statusField = new LabelField ("Good Morning", LabelField.USE_ALL_WIDTH |) LabelField.NON_FOCUSABLE | LabelField.HCENTER) { int _backgroundColour = Color.LIGHTGREEN; public void paint (Graphics g) { g.setBackgroundColor (Color.RED); g.Clear (); Super.Paint (g); } }; Font defaultfont = Font.getDefault (); Police smallfont = defaultfont.derive (Font.PLAIN, 12); statusField.setFont (smallfont); setStatus (statusField);

  When I ran the code you have above, my status background color was red.  Is not what you see?  If so, please provide the BlackBerry model and software version that you are testing.  You can find this under Options.

  Or if you try to do something else, please provide details.

  I tested this in the BlackBerry Simulator included with version 4.5.0 BlackBerry JDE (4.5.0.44).

  To do this in version 4.1, first call getColor and save the current color.  Then call setColor, setting the color to the color you want to use for the background.  After this call call fillRect, starting with 0, 0 and go to the size of the field (use this.getWidth () and this.getHeight () to get this).  This must fill in the field with your specified color.

  To allow the drawing of the default content of the field call setColor once again, passing in the original color, then call super.paint.