How to set the laptop to get a wireless Internet connection?

Similar Questions

• I'm trying to set up an ad - hoc network if I can use my laptop to share our wireless internet connection.

  I'm trying to set up an ad - hoc network if I can use my laptop to share our wireless internet connection. first time I tried, I managed to do this successfully. When I was through, I deleted the network connection. now, when I try the implementation of another, I get a "windows could not set up * network name." No matter what I change, the settings of the firewall market, I can't work. My laptop is connected to the internet through the LAN.

  I am running windows vista Home premium. Computer is Hp Pavilion dv6
  original title: try to set up an ad-hoc connection

  Hello

  Follow the suggestions from the link and check if it helps:

  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to" " "»

  http://support.Microsoft.com/kb/946481

  Reference: Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-computer-to-computer-ad-hoc-network

  Ad-hoc networking

  http://Windows.Microsoft.com/en-us/Windows-Vista/ad-hoc-networking-how-the-network-with-the-funny-name-can-make-your-life-easier

• Went from "Windows Media" to "Windows XP SP3". Now, I get "Error Message 871122" trying to get a wireless Internet connection.

  Here are the facts:

  1. to have access to the internet with a direct line to router Ethernet ONLY, but no wireless connection.
  2. verified Harware for "Intel (r) PRO/Wireless 2915ABG Net" - WORKS FINE.
  3 drivers for the cards above, have most recent downloads - WORKS FINE.
  4 activated the 'USE WINDOWS TO CONFIGURE MY WIRELESS NETWORK SETTINGS' button on the tab 'network connections'.

  In fact... impossible to find the above until that earlier. What happened immediately, is that I no longer get the "ERROR MESSAGE to SEE the ARTICLE ID: 871122" message. And instead, I could FIND my network. He finally has shown Up! However...

  Now, I clicked on my network and click 'CONNECT' and his request now a WEP key to be entered twice.

  So, I just need to get this 'key' to my Service provider and punch in, and it should work? Well, I'll try tomorrow.

  Thank you.

  So I read the ID: 871122 Microsoft Article. But I can't always have to figure if I need some sort of 'Internet '.

  (1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).

  (2) START, CONNECT, WIRELESS INTERNET CONNECTION

  --> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~!  (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;

  --> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network

  3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)

• How to set the parameters of scanning on Officejet 6500 connected to a Mac?

  I'm trying to scan documents and pictures using the following:

  Scanner: HP Officejet 6500 E710n-z all-in-one
  Computer: Macbook Pro retina
  Operating system: OS X mount Lion
  Application: "HP Scan" (this application was provided by HP)

  Whenever I have analyze anything, it comes out in grayscale at 300 dpi resolution.  At least, this is what HP Scan tells me when I click on the "Info" button in the lower right.

  I would like to be able to scan things in color rather than just in grayscale, and I wish I could choose the resolutions other than 300PPI.  But I looked everywhere in the graphical interface of the HP scanning application, and I can't find anywhere to adjust these settings.

  Did anyone here know how to change these settings?

  Unfortunately, the link you provided is a version of the software much older than what I have currently installed.

  HP_Installer_Inkjet_Full_Group02_10.3.dmg was published on 14/09/2009, and it is intended for OS X 10.6, aka Snow Leopard.  When I installed the printer installation CD had software pretty much at this time, and he refused to install on MTN. Lion.  Instead it asked me to download the latest version from the HP website.  What is installed on my machine is a file named HP_Mountain_Lion_Ink_SW_v12.23.18.dmg.  Unfortunately, I neglected to save the URL I downloaded from, and I can't seem to find him.  But I saved a copy of the .dmg file in case I ever need to reinstall.

  Meanwhile, I managed to find the answers on my own.  Part of my problem is that, although I'm fairly familiar with Linux and Windows, I am new to the GUI of Mac and his metaphor interface and GUI desktop is different, enough of these I'm familiar with what my instincts are sometimes not a lot of help.  Then, it took me days to notice the only critical button that made all the selections, I was looking for visible.

  HP Scan DO allows you to set things like the Type of Scan (photo or Document), Mode (color, grayscale, black & white), resolution and a number of other parameters.  But we must first click on the "Scan" button... ", and then click on the widget of the arrow to the right of the selection of the Scanner.  By clicking on the arrow pointing downwards in fact all other settings appear.

  If you change the Type of Scan of photo of the Document, it automatically changes color in grayscale Mode, which does not want to create a color PDF.  But you can change the Mode back to color.  And you can save this document as a PDF searchable to call the I.R.I.S. OCR software on it.

  To create a multiple page PDF, or let the software analyzes all sheets in the document feeder, or place another page on the window and click on the button 'Add' in the lower left corner of the window, how it displays the same dialog box that is displayed when you click 'Scan '. ».  You can click on the arrow down and change the settings for each page or leave them alone and they will remain the same as the parameters of the previous page.

  When you have analysed all the pages that you want in a single document, click 'send '.  This displays the usual selection of files box.  At this point, if you set the 'Searchable PDF', or 'PDF' format a checkbox will appear marked "save all items in a single file.

  Thus, it seems that HP Scan works with MTN. Lion, it provides all the features that Capture of Image and seen I.R.I.S. integrated in it, it provides OCR features that Capture of Image is not.

• I am trying to disable the option 'comments' on my wireless internet connection. I was told to go to my configuration of the router, but how do the router on my PC?

  In the past, I have activated the 'comments' option while others may have access to my wireless internet, but now I want to turn it off.  I got to go to my router configuration. How do the settings on my router on my PC?  I forgot how I activated the option.  Thank you very much.

  Hello

  You must contact the manufacturer of the router for the best assistance.

• Satellite L300 - unable to get a wireless Internet connection

  EY you have some questions,

  Funny, is that I have my laptop 4 on lets say half a year. I had problems with my wireless connection, I tried 2 fix it, but really never been stable.

  But now I had a problem I've ever had before, can't get no Internet connection what so ever with my wireless connection, only time when I get a connection is
  When I put in the cable.

  Checked a lot of posts but nothing really worked, tried the FN + F8 verified and updated http://aps2.toshiba-tro.de/wlan/.
  Tried to update my Realtek RTL8187B wireless 802. 11b / g 54Mbps USB 2.0 network adapter, but he can't find anything on the net.

  Let me know what you guys think I should do.

  was soon Dupp

  Hello

  Well, you said that the Internet connection is working that with the cable so you have checked the settings wireless LAN on the router? WLAN is enabled on the router?
  In addition, you should try to update the firmware on your router.

  Also, make sure that you use the same WLAN settings than on your router. I mean the channel and speed (e.g. 802.11 g).

  You should also try to disable encryption on the router. Can you connect to the router then?

  Finally and most importantly, you use factory settings or you have installed another OS?

• How to set the response speed of my wireless mouse?

  Hello

  I am currently using a microsoft wireless mouse. It works fine except when the games when the pointer is not moving fast enough. I understand that it is possible to change the speed of response in windows, but cannot find the way to do it. I have windows 7 premium 64-bit.  Any notice received with gratitude.

  Stem

  Hi RodBond,

  Thanks for the post. I'm sorry to hear that you are facing problems with the wireless mouse only while playing games

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  1. what game are you talking about?

  2. What is the model of the mouse?

  3. were there any changes made to the computer before the show?

  Please follow the methods.

   

  Method 1:

  Follow the steps in the link.

  Change the settings of the mouse

  http://Windows.Microsoft.com/is-is/Windows7/change-mouse-settings

   

  Method 2:

  Since you are facing these issues only in playing games, please check the mouse settings in the game.

  Reference link:

  Troubleshoot a wireless mouse that does not correctly

  http://support.Microsoft.com/kb/321122

• How to set the size of the print topic

  I have a deskjet 3520 all in one and my computer is a computer laptop dv6 with prof. windows7 64 bit.

  I want to print traces of PCB so that I can make my own, but I do not know how to set the size

  with this printer. They take the entire page when I want to be 2.35x3.35.

  Don't know if it is possible with this printer.

  Any help would be apreciated.

  Last night, I figured out how to resize with IrfanView. It allows me to get the size I want in metric or inches

  and it's free.

• Satellite C660 - how to set the focus of the webcam?

  Hello

  Just bought this laptop, the built-in webcam looks very blurry when I use Skype. Does anyone know how to set the focus to the subject?

  See you soon
  Jules

  Hello

  to be honest, I have no idea on your model of lap... Try to update driver webcamd and play with Skype video settings.

• How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

  Thank you very much for your help, if necessary.

  Quite a few questions, send, but I will do what I can to answer them.

  I recommend first to buy a router, even if it's one you won't connect to internet and it network with others your PC and printer. This will give you the best features and the results of what you're trying to do.

  In addition, the automatic stop of the printer function can be disabled and is not affected by the type of connection. Usually, you can go through the configuration Menu and select tools to change the options there on the energy saving features.

  Finally, the auto off function on your computer is a Windows question, but one easy answer. If you're on a laptop, you can right click on the battery in the tray (lower right corner) and change the settings for energy conservation.

  You might be better off installing the printer via the USB cord and alternately inspiring when you use it, but which is not optimal if you are printing only a few documents on an irregular basis. A network connection is the easiest to manage across multiple computers, honesty, but you have certain requirements for this connection and limits as well.

  I hope this information is useful!
  

• How to set the value of a variable in a cluster in LabVIEW to c#?

  Hi guys, I'm working on a small c# program, which by using the interface provided by LabVIEW.  And I know that, with the help of lv. SetControlValue (name, value) can set a variable just on the front panel. But in my case, there are several groups on the front panel. Then it confused me how to set the variables in these groups. For example, there is a cluster named clusterA and a variable named a., I tried something like this:

  lv.SetControlValue("clusterA.valueA",1);
  

  but it totally inoperable. Everyone has some experience with this sort of thing? Thank you very much!!

  Hey guys, thanks a lot for all your response. I just found a simple way to solve this problem. For example, there is a cluster named "ClusterA", and there are only two witnesses, who are: an int value named "IntA" (default = 10 IntA value) and a string value named "StringA" (by default the StringA = 'abc'). In c#, if you call the method:

  var clusterA is vi (Array). GetControlValue ("ClusterA");

  you will get a table looks like: clusterA = {10, 'abc'}; So if you want to change IntA 123, you simply do:

  clusterA.SetValue (123, 0); 123 the value, 0 is the index of IntA in clusterA, after this clusterA table = {123, 'abc'}

  After that, simply to make the table in LabVIEW using:

  VI. SetControlValue ("ClusterA", clusterA);

  and now you see the LabVIEW, IntA is changed.

• How to set the timeout of read when using channelReader.ReadWaveform?

  I'm using a USB-6210/a. data acquisition, and it works fine until I have to take a longer than 10 s waveform.

  When I take a longer than wave form, I get the error 200284, "some or all of the requested samples are not yet acquired.  To wait for the samples become available use longer read timeout... »

  No problem, I thought, I'll just put a longer period.  I searched through the documentation, and the timeout only I found was the watchdog timeout.  When I wanted a longer value, I get code 200452 State - specific property is not supported by the device or is not applicable to the task.

  I use the code in the example AcqVoltageSamples_IntClk.2008 .net with c# in Visual Studio 2008, .net 3.5 sp1.

  How to set the timeout so that ReadWaveform() is not the time?

  Here is the code:

  privateAnalogMultiChannelReaderchannelReader;

  privateAnalogWaveform awf;

  publicList GetWaveForm()

  {

  Try

  {

  Task getWaveform = newTask();

  getWaveform.AIChannels.CreateVoltageChannel (Channel,"", TerminalConfiguration, RangeMinimum,

  RangeMaximum, AIVoltageUnits.Volts);

  getWaveform.Timing.ConfigureSampleClock ("", SampleRate, SampleClockActiveEdge.Rising,)

  SampleQuantityMode.FiniteSamples, NumSamples);

  getWaveform.Control (TaskAction.Verify);

  channelReader = new AnalogMultiChannelReader (getWaveform.Stream);

  AnalogWaveformdata = channelReader.ReadWaveform (NumSamples);

  AWF = data [0];

  samples As new List();

  for (inti = 0; i)

  returnsamples;

  }

  catch (DaqExceptionexception)

  {

  MessageBox.Show (exception. (Message);

  }

  List of l = newList();

  return l;

  }

  Thank you

  Curt

  Hi Curt,.

  Here is a Knowledge Base that can help you to set the timeout setting in your code:

  The property using Timeout of DAQmx task in Visual Studio

• How to set the parameter of the BIOS under XP?

  I'm trying to boot into the recovery console windows using a bootable XP Recovery console CD. But I do not know how to set the BIOS to achieve this. Can someone give me instructions step by step? Thanks in advance.

  A quick search on Google for

  For Lenovo 3000 change boot sequence

  .. .finds a message in the forum of the Lenovo users who said you choose Start and adjust it.

  I can't check it works, but maybe someone who knows the Lenovo will verify that or tell you what to do.

  It seems like a simple process, but some of the discussions on how to boot from a CD are ridiculously long and full of trail and error.  When you get your job, let know us the good way that works and I'll put it in my notes!

  Here is a link to the Lenovo's Support Page:

  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do?country=us

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• OfficeJet OfficeJet 7612: 7612 - how to set the fax to send only?

  OfficeJet 7612 - how to set the fax to send only? No need to get into the machine. Thank you, Noemi

  Hello

  If you go only to send faxes with this product, you should not disable the receive function to operate correctly. Are you problems with the part of fax machine or you just think you can turn this feature off?

  Thank you!!

• How to set the allocation of network by default in Vista?

  allocation network Deault in Vista

  How to set the allocation of network by default in Vista? I have two routers in wireless network, and it has stopped working. I want to get all default computers to the router to start.  Thank you

  Hello

  Are you connected to the server or if you are on a domain network?

  I suggest you follow the instructions in the link to the configuration of a default gateway on a network:

  Configuring multiple gateways on a network

  http://Windows.Microsoft.com/en-us/Windows-Vista/configuring-multiple-gateways-on-a-network