Satellite L300 - unable to get a wireless Internet connection

Similar Questions

• Went from "Windows Media" to "Windows XP SP3". Now, I get "Error Message 871122" trying to get a wireless Internet connection.

  Here are the facts:

  1. to have access to the internet with a direct line to router Ethernet ONLY, but no wireless connection.
  2. verified Harware for "Intel (r) PRO/Wireless 2915ABG Net" - WORKS FINE.
  3 drivers for the cards above, have most recent downloads - WORKS FINE.
  4 activated the 'USE WINDOWS TO CONFIGURE MY WIRELESS NETWORK SETTINGS' button on the tab 'network connections'.

  In fact... impossible to find the above until that earlier. What happened immediately, is that I no longer get the "ERROR MESSAGE to SEE the ARTICLE ID: 871122" message. And instead, I could FIND my network. He finally has shown Up! However...

  Now, I clicked on my network and click 'CONNECT' and his request now a WEP key to be entered twice.

  So, I just need to get this 'key' to my Service provider and punch in, and it should work? Well, I'll try tomorrow.

  Thank you.

  So I read the ID: 871122 Microsoft Article. But I can't always have to figure if I need some sort of 'Internet '.

  (1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).

  (2) START, CONNECT, WIRELESS INTERNET CONNECTION

  --> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~!  (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;

  --> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network

  3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)

• How to set the laptop to get a wireless Internet connection?

  Original title: wireless router?

  Hello, I have a desktop PC at high speed cable Internet, it works perfectly... my mom wants a laptop, but she wants wireless, I bought a linksys wireless router, now how set the laptop to get internet? I can't do this... also I don't know what kind of im internet network under wpa, wpa2, I know as much as I know, is that it is broadband... Iplease help me get programmed therouter please?

  Hi Corey,.

  We can refer to the following articles and check if it helps.

  Setting up a wireless network

  How to connect to a wireless network in Windows Vista

  Hope this information is useful.

• Hi, I have a d630 Latitiude. I recently bought this and have loaded XP pro. I am unable to get my wireless

  My service tag is (6W9FR1S). I am unable to get my wireless to work (although bluetooth works) the wireless light on the lower right part of the screen don't light up either.

  I downloaded all the drivers of your download page. Cable connection is working, but I can't get the machine to see the wireless card

  In my device manager, everything seems to be ok except: -.
  I have a yellow icon (?) with a "!" to the following: -.

  Biometric co-processor
  Network controller
  Video controller
  Video controller (VGA Compatible)

  The Dell quick set does not give me the opportunity to set up a wireless network

  Help!

  You must install capabilities of wireless network from a windows xp installation cdrom

• I keep getting the 'Network security Key Mismatch' message when you try to connect using my wireless internet connection. I don't know that I use the password.

  I keep getting the 'Network security Key Mismatch' message when you try to connect using my wireless internet connection.  I don't know that I use the password.

  Hi oms1957

  I recommend you try these methods

  Method 1:

  Reset the wireless network and make sure that you set the level of security to WPA2-Personal, as it is recommended.

  Here are some links that will help you set up the wireless network

  What are the different wireless network security methods?

  Method 2:

  If this does not clear if installed third-party antivirus and then try to connect. If the problem is resolved, you have to uninstall the antivirus and reinstall back or check with the settings.

  Method 3:

  Cycle power to the router and check if this is useful.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to get EA3500 routers to connect to internet.

  I'm going through a pair of WRT54G routers to a new pair of routers EA3500, but I can't get the modems to connect to the internet.  I tried new modems and several cable connections between the router and the cable modem Charter, but I still have to get a usable internet connection.  I am able to get the settings of the router by going to 192.168.1.1, but parameters show that there is no internet connection.  My old work still routers big if I pass the modem cable to them, so it's not likely the connection or cable modem.  Any suggestions on what could go wrong?

  Rick

  Try turning off the modem cable for about 30 seconds before plugging in the router.  He can still think its connected to the old mac address

• I'm trying to set up an ad - hoc network if I can use my laptop to share our wireless internet connection.

  I'm trying to set up an ad - hoc network if I can use my laptop to share our wireless internet connection. first time I tried, I managed to do this successfully. When I was through, I deleted the network connection. now, when I try the implementation of another, I get a "windows could not set up * network name." No matter what I change, the settings of the firewall market, I can't work. My laptop is connected to the internet through the LAN.

  I am running windows vista Home premium. Computer is Hp Pavilion dv6
  original title: try to set up an ad-hoc connection

  Hello

  Follow the suggestions from the link and check if it helps:

  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to" " "»

  http://support.Microsoft.com/kb/946481

  Reference: Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-computer-to-computer-ad-hoc-network

  Ad-hoc networking

  http://Windows.Microsoft.com/en-us/Windows-Vista/ad-hoc-networking-how-the-network-with-the-funny-name-can-make-your-life-easier

• How to replace the missing wireless internet connection icon in the network connections?

  How to replace the missing wireless internet connection icon in the network connections?  My Windows XP installation from the CD on a replacement hard drive did not include this icon to connect to another successful install...

  Hello

  The following article might be useful: How to troubleshoot missing icons in Windows Server 2003 and Windows XP network connections
  http://support.Microsoft.com/kb/825826

• Re: Satellite Pro L300 - unable to get into the BIOS or boot

  I have a Satellite L300, who will not get past the POST or the Toshiba start screen. It says to press F2 to enter setup or F12 for the boot sequence, but by pressing buttons does nothing and nothing happens - it just stays there. the HARD drive activity light flashes for a few seconds, then stops.

  I tried the new RAM and a HARD drive different, both with the connected power and battery alone without success!

  someone at - it suggestions?

  Hi jhilton0105,

  Hmm, I think that you have tried everything you can do, and in my opinion, it seems to be a hardware malfunction. Maybe it s related to the motherboard, CPU, module ROM or something else
  I think that your laptop should be verified professional people to get rid of this problem.

  You can find a list of aspic here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

  Good luck! :)

• Satellite L300 - unable to connect to the wireless network

  I have a NETGEAR router and a Toshiba Satellite L300 laptop HP DV2000.

  The HP can connect to my wireless network and also my neighbors network next door (which is not secure)
  However, the L300 can only connect to the network of my nextdoor neighbour even if it can 'see' the NETGEAR network.

  I changed the security from WPA to WEP up to now no security at all, and it seems not to matter.
  The strange thing is that my L300 CAN connect to a wireless network, but not mine!

  And my wireless network works as I can connect from my HP laptop.
  On the L300 it shows 5 bars on the NETGEAR is not a problem of weak signal.

  Any help would be appreciated.

  Try changing the WLAN settings on your router. Compare the WLAN settings on the settings of your laptop and the router.

  Test it with standard B on both devices.
  I mean if your laptop can see neighbours WLAN card wireless network in the laptop must be OK.
  I really thing all is due to wrong WLAN settings.

  Play around with that sort of thing.

• Re: Unable to get the wireless adapter to work on my Satellite L550-1CC

  I'm getting bored with this laptop, I reinstalled windows 7 (32 bit) and can not get the wireless adapter to work.

  My router settings are perfect, my netbook is zero connection problems - the router is just inches away from the laptop most of the time - the laptop insists that there is "no available networks."

  This of course is BS, before I reinstalled windows I could pick up 3 other neighbouring networks as well as mine.

  Windows automatically installed the wireless network - I thought that could be the problem, so I downloaded the realtek driver directly.

  No difference. Always the small icon with Red Cross barred through it.

  I thought it could have been a hot key problem - so I installed the flash card driver that apparently controls the access keys (for some reason any).

  Shortcut keys still don't work - I could really care about that - it's just the wireless network I need.

  Thanks for any help I receive.

  > my netbook has zero connection problems - the router is just inches away from the laptop most of the time - yet the laptop insists there is "no available networks."
  After reading this sentence, I'm a bit confused. If there is no available WLAN networks how your laptop had zero problems to connect?

  One last thing:
  > Of course is BS, before I reinstalled windows I could pick up 3 other neighbouring networks as well as mine.
  What is the difference between the old and the new installation of Windows?

  In general the WLAN use is fairly simple.
  Wireless network card - must be installed correctly (listed in Device Manager
  WLAN card - must be enabled using FN + F8 key combination to activate the wireless network card
  -scan the available WLAN networks area, click on the button of your WLAN and use connect
  -put key WLAN if necessary and after a few seconds WLAN connection will work

  I did this many times on laptops preinstalled Win7 and didn't have any problems. On all laptop computers pre-installed with Toshiba recovery image (factory settings) is not necessary to change the WLAN settings.

• Equium L300: can't get a wireless connection

  Hi all

  I bought a Satellite L300 PSLB2E and can't get a wireless connection. I checked the network cards and she said that working the Realtek RTL8102E Family PCI - E Fast Ethernet NIC (NDIS 6.0).
  I tried the FN + F8 but you don't receive any symbol for Wi Fi.
  I have the wireless switch to the fornt of the appliance.

  Any help much appreciated.

  Hello

  > checked network cards and she told me works the Realtek RTL8102E Family PCI - E Fast Ethernet NIC (NDIS 6.0).

  It is a LAN card and not a WLan card.
  You see a different device in the device-> Realtek RTL8187B Wireless 802 + ECS as Manager. 11b / g 54mbps USB 2.0 Network adapter +.

• Satellite L10 - could not get the wireless operation

  Hello

  I reformatted my Satellite L10 and managed to pull the best of drivers to use, but I can't seem to get the wireless working.

  I installed the Realtek driver http://aps2.toshiba-tro.de/wlan/?page=downloads

  I also tried to install the InProComm driver, but the installer crashes just after a while.

  Anyone know what could be the problem? All solutions?

  Thank you

  Naushad

  Hello

  What operating system do you use?
  I checked Toshiba driver download page and looked for the driver for Satellite L10. Here, I can only find a driver Intel WLAN for Vista and the driver InProComm for XP but I can t find a Realtek WLAN driver.
  It seems that your laptop is equipped with an Intel card check so the Toshiba site again:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Before you install the driver WLAN make sure that WIFI is turned on with the hardware switch on the computer laptop and FN + F8.

  Good bye

• Re: Satellite A40 - can I get a wireless network card?

  Anyone know if I can get a wireless card for the A40 Satellite?

  Thank you

  Hi calibra,

  Before you buy a wireless network card, you should check if your laptop is already equipped with WLAN antennas. The antennas are installed as part of the screen and are necessary for the wireless network adapter. If you n t have it your WLAN card will find not all networks.

  By the why: you can get a compatible WLAN card to an authorized service provider. Do you know how to contact the guys?

• Satellite L100 - connection problems with a wireless internet connection

  Hello

  I had some of my Satellite L100 connection problems to my sky wireless broadband connection. My laptop detects the connection and I have a bubble appears confirming that the wireless connection is connected. However, when I open internet explore it appears with 'cannot display the page'.

  Now, the wireless works with our other non-Toshiba laptop so I know that the connection is ok but it does not connect with my Satellite. Is there something I can do?

  Try reboot you the router. In many similar situations, it helps me.