How to set the resolution in Windows Vista?

Similar Questions

• Windows vista Home premium recovery question - how to get the source for windows vista home edition premium as the recovery does not work since the recovery partition

  How to get the source to windows vista Home premium recovery is not from the recovery partition and gives me an error message

  Hello

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How to set the resolution on in my XP operating system installation.

  I have a computer that had a copy pirated XP, I bought a genuine copy of XP for the computer I built, however, I was unaware that I could use it only for a computer, and I tried to install it on the computer with the pirated XP operating system.  Then, I was unable to adapt to the resolution on the computer that has the OS piriated.  I then bought another windows XP OS, installed on the computer including the resolution and nine I couldn't settle, (who had the OS piriated), however, I still have the same problem of not being able to set the resolution from 600x400dpi. My attempt to use the first copy of XP on my second computer was planting a virus on it?  What should I do to solve the problem?

  After doing a clean install of the operating system, you must then install the drivers for all your hardware. In your case, install the video card drivers will allow you to change the resolution.

  Never get the drivers from Windows Update. Bring:

  1. site of the device mftr. ; OR
  2. site of the card mother mftr. If the material is on board; OR
  3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

  Read the installation instructions on the Web site where you get the drivers.

  To find out what hardware is in your computer:

  1. read all documentation that you got when you purchased the computer.
  2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
  3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

  http://www.belarc.com/free_download.html - Belarc Advisor
  http://www.gtopala.com/ - system information for Windows MS - MVP - Elephant Boy computers - Don ' t Panic!

• How to set the resolution to a VI (NOR-IMAQdx)?

  Hello.

  I can set the resolution very well with the video Mode able & Automation Explorer, but I will in my VI as well.

  I found the property node named 'vidéo Mode' and the problem is that I don't really know, what I have to write in it? I want to reduce my resolution to

  160 x 120

  Thanks in advance

  When I run the VI list of video Modes, it shows me 0(160x120), 1(320x240)... If you run that first of all, it should show you. You could also count what position it is in the list of Max (start at 0). I'd stabbed to 0.

  Mike

• How to increase the rate on windows vista

  my rate to refreash on windows vista needs to increase... looked at solutions and it seems that vista is no longar supported by microsoft can anyone help

  Hello

  Why are you trying to increase the refresh rate? What exactly is the problem?

  You can see the steps in the following article on how to change the refresh rate.

  Flicker of the correct monitor (refresh rate).

  http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

• How to set the clock of Windows 7 computer?

  Original title: want to syncrynize times.

  I have wamt to put my computer on my new time

  Hi Harry,.

  You can follow these links:

  Set the clock

  Note: Article applies to Windows Vista however, it remains valid for Windows 7 as well.

  Change the display of dates, times, currencies, and measures

  Hope the helps of information.

• How to set the resolution of a sequence in first?

  I built a sequence that looked like, it was full frame (at least in width) in the window of the program, but when I export to Youtube to 720HD, its got a large black border on all sides. This particular sequence contains a lot of still images, with splashes of color used to show the video in a part of the image. I don't mind a small black border at the top and bottom, but there must be a way to export it where he resumed all of the horizontal resolution.

  Ideally, I start the project to a friendly resolution of YouTube and conform to the media by the scale, so that I may fill the screen. What tools am I missing here?

  In general, the CC of PrPro versions, we choose the main type of media for rates/image size that will be in the removal project just a clip from that on the blank/empty box sequence. PrPro then sets the parameters of the sequence according to this clip. If your export to YouTube in a format 720HD is your main concern, you can click on the "new item" icon at the bottom right of the project Panel and choose 'new sequence' and set it to a 1280 x 720 at the frame rate used by key video clips that you use.

  Then, when you add media to other sizes, you can select 'set to size of the image' or balance-for or whether you need to apply in an optimal way.

  Neil

• How to format the disk with Windows Vista to install Windows XP

  Hi, I would like to format my laptop and put Windows XP, but when I tried to start using the XP cd does not recognize the HARD drive, the type of my HARD disk is SATA
  I think that I need to download specific drivers, but I found no drivers on the toshiba Web page
  Thank you

  Hi Bertoni

  Sorry, but I must be honest now: I am ready to help, but I hate it when someone write about problems, but not write a which model of laptop. How to check the download page and you give any information when nobody knows what model of laptop you have?

  Let us know what model of laptop you have and we can continue the discussion. Otherwise visit category where your laptop and I am 100% sure that you will find the right answer it?

• How can get the keys to windows vista for my computer laptop elitebook 8530w c

  Hello

  I bought a computer laptop elitebook 8530w sn 2CE94100GR with vista installed windows. the laptop has collapsed, and now I need the keys to re - install windows vista back. The windows sticker is not there. kindly advice. Thank you.

  Hello

  I bought a computer laptop elitebook 8530w sn 2CE94100GR with vista installed windows. the laptop has collapsed, and now I need the keys to re - install windows vista back. The windows sticker is not there. kindly advice. Thank you.

  ===================================================
  For OEM support software... Check with your computer manufacturer.

• How to make the banner with Windows Vista.

  Is there a program on Windows Vista home 64 to make banners?

  Thank you, redcarousel

  A banner could translate into words that scroll on your screen, or it could mean a banner you wave a flag pole, if the latter then no.

• How to set the resolution of rendering?

  Hello. I'm not finding where I can put the resolution of my work. I would like to control, if possible, the resolution of the 'paper' in the display, print or export for photos and the effects of rasterization (as the shadows).

  Also when I import a picture, the dimensions of the placed object are enormous, far superior to the size of a sheet A4. I think that the dimensions are calculated in accordance with the resolution of the document which must be very low (such as 75 dpi).

  Effects > effects of rasterization of the Document settings.

• How to change the language of windows vista in English?

  I brought a laptop from the Germany and its Dutch language. I want to change it to English. Please be so kind enough to help me. Thanks in advance...

  You forgot to tell us what version of Vista you have. If you have Home Basic/Premium you can't do this and you will need to buy an English Vista and do a clean install. Otherwise:

  How can I get additional language files? - http://windowshelp.microsoft.com/Windows/en-US/help/35a1b021-d96c-49a5-8d8f-5e9d64ab5ecc1033.mspx#E3

  http://tinyurl.com/lnqmkf

  Note: Only Ultimate and Business supported the Pack of MUI (MUI)
  MS - MVP - Elephant Boy computers - don't panic!

• How to remove the password in Windows Vista?

  Hello!
  Maybe someone can help me... I have a laptop - Satellite L300-11 q. Windows does not correctly load, and when I try to run the recovery it asks password administrator... But I never put this password. What should I do?

  Can you please tell me how you try to install the recovery image and when you ask for password?

  Sorry for this question but the story sounds strange for me. I got several different Toshiba notebooks with DVD recovery and HARD disk image, but I have never seen anything like it.

• How to set the resolution on my screen Dell

  original title: my game is too big for my screen. I do not see the screen.  How can I adjust the size? I have a large flat-screen Dell

  My game screen is too large for my screen (wide flat screen, Dell), I can't see the objects at the top of the screen. How can I adjust it?

  My game screen is too large for my screen (wide flat screen, Dell), I can't see the objects at the top of the screen. How can I adjust it?

  I solved the problem.  I found a control on the right side of my screen, menu selected, display. vertical and sail, set, thanks for trying. Maybe this will help someone else, Dell could not help me either. I found the solution while I was waiting for their technology to find an answer.

• How to set the resolution of the screen to zoom full size?

  I have a monitor with resolution of ppi 109 and I already put this resolution in photoshop and acrobat preferences, but I can't find where in illustrator cs5 it can be implemented, I would be able to get a glimpse of my works in good real print size.

  109/72 = 151,3% to get the screen display to be set to 151% print size.