How to set the resolution on in my XP operating system installation.

Similar Questions

• How to set the resolution to a VI (NOR-IMAQdx)?

  Hello.

  I can set the resolution very well with the video Mode able & Automation Explorer, but I will in my VI as well.

  I found the property node named 'vidéo Mode' and the problem is that I don't really know, what I have to write in it? I want to reduce my resolution to

  160 x 120

  Thanks in advance

  When I run the VI list of video Modes, it shows me 0(160x120), 1(320x240)... If you run that first of all, it should show you. You could also count what position it is in the list of Max (start at 0). I'd stabbed to 0.

  Mike

• How to set the resolution of a sequence in first?

  I built a sequence that looked like, it was full frame (at least in width) in the window of the program, but when I export to Youtube to 720HD, its got a large black border on all sides. This particular sequence contains a lot of still images, with splashes of color used to show the video in a part of the image. I don't mind a small black border at the top and bottom, but there must be a way to export it where he resumed all of the horizontal resolution.

  Ideally, I start the project to a friendly resolution of YouTube and conform to the media by the scale, so that I may fill the screen. What tools am I missing here?

  In general, the CC of PrPro versions, we choose the main type of media for rates/image size that will be in the removal project just a clip from that on the blank/empty box sequence. PrPro then sets the parameters of the sequence according to this clip. If your export to YouTube in a format 720HD is your main concern, you can click on the "new item" icon at the bottom right of the project Panel and choose 'new sequence' and set it to a 1280 x 720 at the frame rate used by key video clips that you use.

  Then, when you add media to other sizes, you can select 'set to size of the image' or balance-for or whether you need to apply in an optimal way.

  Neil

• How to set the resolution in Windows Vista?

  My data entry boxes are too small and when I type something in I don't even see what it says its so small. I tried to go into the tools and nothing helped and I even changed my skin

  You can try to right click on the desktop and go to personalize. Display | Adjust the resolution and then change the screen resolution and see if that helps.
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  My data entry boxes are too small and when I type something in I don't even see what it says its so small. I tried to go into the tools and nothing helped and I even changed my skin

• How to set the resolution of rendering?

  Hello. I'm not finding where I can put the resolution of my work. I would like to control, if possible, the resolution of the 'paper' in the display, print or export for photos and the effects of rasterization (as the shadows).

  Also when I import a picture, the dimensions of the placed object are enormous, far superior to the size of a sheet A4. I think that the dimensions are calculated in accordance with the resolution of the document which must be very low (such as 75 dpi).

  Effects > effects of rasterization of the Document settings.

• How to set the wake-up or rest or notification system

  Hello

  Recently, I have found that unlike android there is no background for BB10 service yet. Is it possible to set the alarm system or the rest for notification?

  fireball003, it seems so far we have no way to set up a call automated our applications based on date and time, unless we do using the push service, which also requires set up a remote server to manage things. This will probably be something that comes when we have substantive service capacity, in a future update? They have never said anything on these things officially, beyond to confirm that we do not yet have them.

• How to set the power management settings to prevent my system mode sleep?

  computer stopped at the fast

  How to stop the computer after shutdown if you mount a way for only 30 to 40 seconds

  Type the word power in your Start menu, then choose "change when the computer sleeps."

• How to set the resolution on my screen Dell

  original title: my game is too big for my screen. I do not see the screen.  How can I adjust the size? I have a large flat-screen Dell

  My game screen is too large for my screen (wide flat screen, Dell), I can't see the objects at the top of the screen. How can I adjust it?

  My game screen is too large for my screen (wide flat screen, Dell), I can't see the objects at the top of the screen. How can I adjust it?

  I solved the problem.  I found a control on the right side of my screen, menu selected, display. vertical and sail, set, thanks for trying. Maybe this will help someone else, Dell could not help me either. I found the solution while I was waiting for their technology to find an answer.

• How to set the resolution of the screen to zoom full size?

  I have a monitor with resolution of ppi 109 and I already put this resolution in photoshop and acrobat preferences, but I can't find where in illustrator cs5 it can be implemented, I would be able to get a glimpse of my works in good real print size.

  109/72 = 151,3% to get the screen display to be set to 151% print size.

• How to set the resolution of the Viewsonic VX2235wm monitor with Pavilion a420n desktop computer?

  1 HP Pavilion A420N

  2 Win XP

  3 Control Panel-> display, does not have the optimal screen resolution, 1680 x 1050 at 60 Hz. The selections available only for a lower resolution without the proportions appropriate for this monitor and the screen image is severely distorted.

  4. installed latest version of the BIOS, video drivers, drivers latest installed monitor, the monitor is a Viewsonic VX2235WM

  Can someone help me out?

  Thank you

  Here are the specifications of your HP a420n desktop and its card mother A7V8X - LA Kamet2-GL6E. The edge VIA Unichrome graphics adapter is old and does not support the extensions on the big screen. 800 x 600, 1024 x 768 and 1280 x 1024 resolutions are more likely that will support the computer, which are all the 4:3 aspect ratios. Based on the above specifications, I would say that after buying and installing a AGP 8 X / 4 X (1.5V) graphics card, your system must manage a 16:10 ratio width / Monitor wide screen without problem.

  Frank

• How to set the resolution of TV connected to the computer via HDMI?

  original title: new brand lenovo PC, windows 7, connected to my samsung tv with HDMI, screen too large, can not see the button to start clock, icons, etc what do I do?

  I have a new computer Lenovo with Wwhat to do? indows 7; I use a Samsung LED tv for a monitor, HDMI connection.  The screen is too big for the monitor, I don't see the button start, icons, clock, etc.

  Hello

  You can see the following article for more information on monitor display problems:

   

  Get the best display on your monitor

  http://Windows.Microsoft.com/en-us/Windows7/getting-the-best-display-on-your-monitor

   

  Ways to improve display quality

  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-display-quality

  Let us know if that helps.

• How to set the 6.5 digit resolution

  I am using Agilent 34970 A data acquisition and switching unit. I tried to set the resolution 6.5 digit in the confEZ.vi of HP34970A, but every time that I vi 5.5 resolution numbers. I don't know how to change 6.5 digit.

  Hello France,

  What happens if you set 5.5 digit resolution.  You get more than 5.5 the resolution?

  Please be sure to set the accuracy before you run the vi.

  The manual of the device tells you that you can get 6.5 digit resolution?

  Kind regards

  Sammy Z.

• How to activate the resolutions of wide screen on Satellite Pro A10

  Hello

  I looked through various positions through the forums, but have not found how to activate the wide screen on a Toshiba Satellite Pro A10 resolutions.
  The 2 following wires offer partial answers:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19570
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19677

  The solution in the 2nd post won't work because the A10 has an Intel graphics card, not a Nvidia. He suggested also, modify the INF of the graphics driver, but to extract the driver (SA10B2DP.exe) file includes an installer, but no INF.

  Just look to see if anyone has any advice on how to activate the resolutions such as 1440 x 900 or 1680 x 1050.

  Thank you

  Hello

  you mean on the external screen, Don t you? If you have an intel chipset graphic why Don t you download the drivers from the website of intel.
  Maybe it offers a resolution of the external display.

  I don't know if the res external can be set to widescreen on this chipset as the drivers are somewhat limited...
  Can you describe what monitor you have and how you connect it to your machine. (d-sub or DVI)?

  Would appreciate some reactions :)

  Welcome them

• My window size is about 1/4 "wider than my monitor screen. How to set the size of the window?

  My window size is about 1/4 "wider than my monitor screen. How to set the size of the window?

  Hello

  ·        You did it changes on your machine before this problem?

  ·        You have a LCD or TFT monitor?

  Usually in LCDs, there will be an option to set the button of the screen on the monitor resolution.

  You can also follow these links for the resolution of the monitor & check if it helps.

  Change the resolution of your monitor

  To change your screen resolution

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to set the size of my screen?

  Original title: maintenance

  How to set the size of the screen

  Norm 21

  How to set the standard for screen size 21

  Resolution:
  Right-click on a free space of the desktop > Personalize > Display Setings > move the slider to the left or right to set the resolution. Check your user manual, see if she tells you what resolution is for your computer. My laptop is using 1280 x 800 pixels.

  Here is a table of the guide line:

  

  You can also try this method...
  Re - set DPI:
  Right-click on a free space of the desktop > customize > column to the left, adjust the size of police (in PPP) > uac prompt > click default scale (96 DPI).

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.