How to activate the resolutions of wide screen on Satellite Pro A10

Similar Questions

• How to add the internal card card wifi pci Satellite Pro A10

  Hello

  I want to add a mini PCI wireless network.
  How to install this. This card is in the slot next to the battery on the bottom of the laptop. (slot number: 4).

  Concerning

  Hello

  Each series of notebook Toshiba supports different hardware specifications.
  This means that some units can be improved with internal miniPCI WLan and some computers laptops don't support this feature.

  I put t know what series of notebook you that an internal card may be placed either in the slot located at the bottom of the device or hidden under the keyboard.

  See you soon

• How to activate the resolution wide on external monitor on Satellite A40-261

  Hi all
  I have a Satellite A40 laptop and just bought an external display. I find only normal resolutions in the area of comprehensive property. Is it possible to expand the range of wide screen resolutions?

  Best regards, Leander

  Hello guys.

  First of all, I would like to say a few words on the screen resolutions.
  Mainly the resolution of certain is not available because the resolution is not listed in the graphics driver. In other words, if the driver doesn't support this resolution so you will not be able to choose.

  We try to look at a few:
  @BKV
  You have a Satellite M100. As you say that this laptop is equipped with an ATI card.
  Have you checked the settings in the ATI catalyst? Go to display properties and choose Advanced Options. Here, you choose the tab of ATI catalyst.

  New window should open, and you should see the ATU catalyst control center.
  Check the option display the Advanced view display. Check this area. Maybe the resolution is available here.

  @Lea
  This unit uses the graphics card Intel, but Intel tab should also appear in the advanced properties of the graphics card.
  If you n t found the right resolution, so I guess that the driver does not support!

• How to activate the S-video port on a satellite M30X 154?

  Hey does anyone know how to activate the S-video port on your laptop by Satellite SM30X-154?

  If I press the FN + 5 keys the only options I get is LCD and no S-VHS option. My TV is set up for this I have Watch DVD through the cable.

  When I connect the cable to the laptop, nothing happens!
  Help

  Hello

  Sorry, my A100 Tosh has a Geforce 7600, I don't know what is your GA.

  But on mine, I have a NVidia Control Panel, where I can configure dualview,
  normally, which allows me to choose between the builtin LCD and the external monitor (VGA Port).

  When a TV is plugged and not recognized, I can apply recognition there.
  Relative to the opening of the Panel, the TV is also available.

  Maybe I could help you.
  If this isn't the case, note that the settings of windows your TV is not available.
  Try to go to the User Interface of your graphics card...

  Matz

• Need to know the model of display driver for Satellite Pro A10

  Hello! I'll try to find the exact display on my satellite pro A10 chipset model. The driver on the toshiba site is not updated, and I can't use the correct resolution (19 "Wide or 1440 x 900) on my external display.
  At the same time before I was able to update the driver correctly, just the search for generic driver "Intel 82852/82855 GM/GME" and software "extreme graphics" at the Intel Web site.
  But now, on the Intel site that they ask the exact model, which means that, if she is 82852 or 82855, and if it is GM or GME...
  Can U give the specific model please?
  My computer is a celeron 2500 MHz with 1 GB RAM and 30 GB HARD drive (standard)

  Thanks in advance...

  I found some details on this device and it seems that the laptop was equipped with the internal graphics controller Intel 852GM; code name: Montara GML

• How to activate the resolution wide screen to external monitor on Equium A60?

  Hello

  I had an Equium A60 with an ATI Radion 7000 mobility grahpics chip in it. Earlier the LCD is dead and has decided to use an external monitor rather than replace it. However, the external monitor is a monitor 22 '' widescreen computer does not provide a display suitable for resolution. Is it possible to update the graphics driver to provide the wide screen formats. I looked on the toshiba updates, but there is nothing new there, and ATI are not ready to support offer it on a laptop.

  Any ideas?

  Hello

  You can't choose your preferred resolution because the graphics driver does not support.
  Eventually the 3rd party driver support your favorite display resolution, but to be honest I wouldn't use these drivers because it could cause serious difficulties for laptop.
  The point is that these 3 third-party drivers are untested and not certified by Toshiba.
  Therefore, the use is at your own risk.

  Good bye

• How to activate the Intel GPU of 4000 on Satellite L850-10J

  Hello

  I would like to know how to activate my graphic card intel 4000.
  On the Device Manager in the graphics card menu I can not see the 4000 graphics card intel, shows me only HD 7670 M Ati graphic card.

  I did an update of my bios version 1.60.
  What is supposed to do?

  Thank you.

  Hello

  You want to switch between the internal and dedicated GPU. Right?
  You said that you have an ATI graphics card.
  For laptops that are equipped with the graphic chipset ATI something like that is not possible because not supported

  As far as I know, you can do so with the nVidia GPU support the Optimus technology.

• How to set the resolution on my screen Dell

  original title: my game is too big for my screen. I do not see the screen.  How can I adjust the size? I have a large flat-screen Dell

  My game screen is too large for my screen (wide flat screen, Dell), I can't see the objects at the top of the screen. How can I adjust it?

  My game screen is too large for my screen (wide flat screen, Dell), I can't see the objects at the top of the screen. How can I adjust it?

  I solved the problem.  I found a control on the right side of my screen, menu selected, display. vertical and sail, set, thanks for trying. Maybe this will help someone else, Dell could not help me either. I found the solution while I was waiting for their technology to find an answer.

• How to get the resolution of all screens

  Hello, I am trying to get the screen resolution and the position (display two left or right of a display) all connected screens (normally two) of LabView 8.6. My idea was to take the .net 'system.windows.forms.screen' class, but there is no public constructor.

  Can someone help me?

  Best regards, Nicolas

  Hey,.

  You can use a propertynode on the class of application with the property "Display.AllMontiors".

  Christian

• How to activate the Ricoh SD/xD/MMC in Satellite A300 @ Ubuntu Intrepid Linux?

  Hello

  I have a laptop Toshiba Satellite A300 PSAGCE 1 1 M
  and I installed Ubuntu Intrepid with kernel 2.6.27.11 (I did not
  because Linux is better and faster than Vista and free... I did it
  because I'm working with simulation of calculation, and I need Linux in this
  machine).

  Unfortunately does not have a single resource: Ricoh SD/xD device.
  But he is identified by the Linux kernel and it has loaded modules to be controlled (I guess).

  That I have to do to run my xD/SD/MultiMedia Card? (I put an xD card, and there is no message in the newspaper).

  My paper, hardware and modules are:
  _ # SDHCI connect messagens: _

  Bq. + $ dmesg | grep-i sdhci + \\+sdhci: Secure Digital Host Controller Interface driver +------+ sdhci: Copyright (c) Pierre Ossman +------+ 0000:04:06.1 pci sdhci: controller SDHCI found [1180:0822 | http://forums.computers.toshiba-europe.com/forums/] (rev 22) +------+ 0000:04:06.1 sdhci-pci: PCI INT B-> GSI 17 (low)-> IRQ 17 +------+ 0000:04:06.1 pci sdhci: will use DMA mode even if HW does not fully support it. +------+ mmc0: controller PCI - 0000:04:06.1 - using DMA + SDHCI

  # Modules SDHCI _: _

  Bq. + $ lsmod | grep-i sdhci +------+ sdhci_pci 17024 0 +------+ sdhci 27396 1 sdhci_pci +------+ 67168 1 sdhci mmc_core +.

  Information of pci RICOH _ #: _______

  Bq. + $ lspci | grep-i \\+04:06.0 ricoh + FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 controller (rev 05) + \\+04:06.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) + \\+04:06.2 system peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) + \\+04:06.3 system peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12) +.

  _ # 04.06.X pci information newspaper: _

  Bq. + $ dmesg | grep-i '04:06 ' +------+ PCI: 0000:04:06.0 reg 10 32 bit mmio: [d3100000, d31007ff] +------+ pci 0000:04:06.0: supports D1 +------+ pci 0000:04:06.0: supports the D2 +------+ pci 0000:04:06.0: SME # D0 D1 D2 D3hot D3cold supported +------+ pci 0000:04:06.0: SME # disabled +------+ PCI: 0000:04:06.1 reg 10 32 bit mmio: [d3100a00, d3100aff] +------+ pci 0000:04:06.1: supports D1 +------+ pci 0000:04:06.1: supports the D2 +------+ pci 0000:04:06.1 : SME # D0 D1 D2 D3hot D3cold supported +------+ pci 0000:04:06.1: SME # disabled +------+ PCI: 0000:04:06.2 reg 10 32 bit mmio: [d3100900, d31009ff] +------+ pci 0000:04:06.2: brackets D1 +------+ pci 0000:04:06.2: supports D2 +------+ pci 0000:04:06.2: SME # supported from D0 D1 D2 D3hot D3cold +------+ pci 0000:04:06.2: SME # disabled +------+ PCI: 0000:04:06.3 reg 10 32 bit mmio: [d3100800, d31008ff] +------+ pci 0000:04:06.3: media D1 +------+ pci 0000:04:06.3: supports D2 +------+ pci 0000:04:06.3 : SME # supported from D0 D1 D2 D3hot D3cold +------+ pci 0000:04:06.3: SME # disabled +------+ ohci1394 0000:04:06.0: PCI INT B-> GSI 17 (low)-> IRQ 17 +------+ ohci1394 0000:04:06.0: 64 latency timer setting +------+ 0000:04:06.1 pci sdhci: SDHCI controller found [1180:0822] (rev 22) +------+ 0000:04:06.1 sdhci-pci: PCI INT B-> GSI 17 (low)-> IRQ 17 +------+ 0000:04:06.1 sdhci-pci: will use DMA mode even if HW does not fully support it. +------+ mmc0 : controller on PCI [0000:04:06.1] SDHCI using DMA.

  Thank you for your attention.

  Post edited by: RafaelBarreto

  Hello

  Have you tried to find the answer on some Linux forum?
  Toshiba doesn't support Linux for this model of laptop and I don't think that anyone here can help you.
  If you will find some useful info please post it here.

  Good luck!

• How to extend the memory of card display for Satellite Pro A120?

  I would like to expand the memory used by the graphics card because its at this stage only 8 MB, I want to make this 64 MB. Total memory in the computer laptop AI 512 MB. Normally you can do this in the BIOS but I can't find any option to do this.

  Someone at - it an idea how to proceed?

  What graphics card you have?
  What is a processor ATI or nVidia GPU?

  Graphics memory of my knowledge depends on the size of the main memory.
  The larger main memory, the largest memory GPU.

  However, if your graphics card supports shared memory and then the graphics card driver controls the amount of GPU automatically.
  In other words, if the GPU memory is not required then shared the GPU memory is set to a lower value.

• Error blue screen on Satellite Pro A10

  Hello

  I try to help my in-laws with their SPA10 Pro Satellite. I had set this up for them a few months ago and it was working fine.
  Now it reboots about two seconds after the "use last good configuration ' screen etc, gets to the screen again then restarts immediately to infinity, never a break on error message for long enough to see what he says.
  I managed to boot from the Windows XP home and got disc with respect to the repair or continue with the installation screen. When I asked the computer don't either TI stuck on blue screen almost immediately. The error message is
  STOP: 0X000000C5 (0X00000002, 0X00000001, 0X00000000, 0X8082B98B)

  This is beyond my skill level, someone can help?
  Thank you

  Hello

  It is not easy to tell what the problem is here and what your in-laws have made with this device. Try to start the machine in safe mode by pressing F8 at the beginning upward. What unit starts check a bit if some strange software is installed.

  If there is no important data, I advise you to install the new OS. On this way, you will be sure that it is not because of software. If the problem persists then is the question is more complicated and there may be a hardware failure.

  At the moment I can't tell you more. Try to make the clean OS install and post again on the results.

• How to activate the icon of speaker on the CONNECTED screen selection?

  How to activate the icon of speaker on the CONNECTED screen selection?

  Hi leross,.

  I don't know what app you ask on the sound settings for your Apple Watch.  But, in general, you choose your Apple Watch as a source for your music.  Once you pair your Apple Watch with a bluetooth headset, you will be able to adjust the volume.

  Listen to music on your Apple Watch

  Play music from your Apple Watch

  You can also enjoy the music on your Apple Watch without your iPhone when you pair with a Bluetooth headset. Open the music application, scroll up, then on your Apple Watch to choose it as a source. Then scroll down and tap one of these options:

  • Playback in progress. Play / pause what is currently playing on your Apple Watch.
  • My music. After a sync a playlist to your Apple Watch, you can browse your music by Albums, artists and songs.
  • Playlists. Follow the steps below to sync a playlist to your Apple Watch.

  Take care

• How to activate the screen of welcome and fast user switch client services for netware

  How to activate the screen of welcome and fast user switch client Services for NetWare...

  How to restore and step to uninstall client services for netware

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link: http://social.technet.microsoft.com/Forums/en-US/winserverPN

• How to activate the touch screen on Windows 8.

  Original title: How can I activate this touch screen of toa

  How can I make my computer a touch screen

  Hey Cindy.

  Thanks for posting your question in the Microsoft Community forums.

  The description of the problem, I see you want to how to activate the touch screen on Windows 8.

  I've surely you will help solve this problem. Let's try a few steps that will help you solve the problem.

  If the computer has the features for touch screen computer and you want to enable you can try the procedure described in the article and check.

  a. press on the key Windows + Q.

  b. type Control Panel.
  c. go to the Sound and material.
  d. click on Pen and touch.
  e. click the contact tab .
  f. Enabthe use your finger as an input.

  For more information, please see the link.

  Contact: call, tap and beyond
  http://Windows.Microsoft.com/en-in/Windows-8/touch-swipe-tap-beyond

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.