How to set the value of the point of application using pl/sql in the application process

Similar Questions

• How to set the value of a field from the LOV of another field.

  I'm trying to figure out how to set the value of a field (P_PROGRAM) to the value of another field of based lov (P_STATE).
  
  The P_PROGRAM field is a hidden field. The P_STATE field is a required field and is based on a list of values for the State Codes.
  
  When a user selects the State to P_STATE, the field of the P_PROGRAM should be set to this value, as well.
  
  I tried different ways to get there via a function call on the post for the calculation of the field P_STATE, defining the source P_PROGRAM to the value of the page item P_STATE put varialbles, creating a process before SENDING, and they all still come back as having a NULL value for P_PROGRAM, therefore impossible to create the file in the db as the PROGRAM is a mandatory field in the table.
  
  Can you please help? Thank you, Laura

  Laura,

  It is always helpful if you provide information about the Apex version you are using. The Apex 4 you can use Dynamic Actions to achieve this. In earlier versions is possible using processes to submit or javacsripts, as well.

  Heres how you do in 3.x with treatment to submit, to make it work in 4.0 as well.

  1 do the P_STATE ' select list submits the Page.
  2. Add a calculation on the point P_PROGRAM, or write to him assign a value based on a process. The treatment should be OnLoad after the header
  3. If the page does not have an unconditional branch that loops on itself, add a. NOTE: The direction must be the last branch (larger sequence number) and should have checked "Save Session State".

  This is what will happen
  a. when the State is selected Page will be submitted
  (b) it will take the unconditional branch to himself and save the value of P_STATE
  c. the calculation process / fills the value of the P_PROGRAM element when the page reloads

  Kind regards

• How to set the value of a variable in a cluster in LabVIEW to c#?

  Hi guys, I'm working on a small c# program, which by using the interface provided by LabVIEW.  And I know that, with the help of lv. SetControlValue (name, value) can set a variable just on the front panel. But in my case, there are several groups on the front panel. Then it confused me how to set the variables in these groups. For example, there is a cluster named clusterA and a variable named a., I tried something like this:

  lv.SetControlValue("clusterA.valueA",1);
  

  but it totally inoperable. Everyone has some experience with this sort of thing? Thank you very much!!

  Hey guys, thanks a lot for all your response. I just found a simple way to solve this problem. For example, there is a cluster named "ClusterA", and there are only two witnesses, who are: an int value named "IntA" (default = 10 IntA value) and a string value named "StringA" (by default the StringA = 'abc'). In c#, if you call the method:

  var clusterA is vi (Array). GetControlValue ("ClusterA");

  you will get a table looks like: clusterA = {10, 'abc'}; So if you want to change IntA 123, you simply do:

  clusterA.SetValue (123, 0); 123 the value, 0 is the index of IntA in clusterA, after this clusterA table = {123, 'abc'}

  After that, simply to make the table in LabVIEW using:

  VI. SetControlValue ("ClusterA", clusterA);

  and now you see the LabVIEW, IntA is changed.

• How to set the default value of the attribute with a sequence number? Is it possible to add a string to seq.no. like abc0001?

  Mr President.

  How to set the default value of the attribute with a sequence number? Is it possible to add a string to seq.no. like abc0001?

  Concerning

  For the date, you can use groovy expression adf.currentDate to set the current date. reference http://adfgouravtkiet.blogspot.in/2012/11/how-to-set-default-values-for-entity.html

  You already have ways to use the sequence.

  How do you add a new value in the form. You're creating a new line of your page (user interface) and by engaging with validation operation? Unless you commit you will not be able to see anything in the table.

  Thank you

• How get/set the value of the DataObject object in the task of the API?

  How get/set the value of the DataObject object in the task of the API?

  Are there examples of code availible?

  Hello

  You are here: http://docs.oracle.com/cd/E23943_01/dev.1111/e10224/bp_worklistcust.htm

  Antonis

• How to set the initial value programmatically in af:selectOneChoice

  Hi all

  How to set the initial value programmatically in af:selectOneChoice

  filled with view object instance, but I want to show the value initial programmactically

  This can help you: Re: how to set the default value of the component selectOneChoice in ADF

  and the default af:selectOneChoice programmatically from backing bean

• How to set the color for background ChoiceBox point to ChoiceBox with css?

  How to set the color for background ChoiceBox point to ChoiceBox with css?

  I need to change the backgound color list items.

  I tried with the following code, but it's not help to:

  {.context-menu .choice-box

  -fx-background-color: Red;

  }

  .choice-box .menu-item {}

  -fx-background-color: red;

  }

  In Java 8, either of your selectors should work.

  In Java 7 (JavaFX 2.2), you need of the following workaround:

  #choice-box-menu-item {
       -fx-background-color: red ;
  }
  

• How to set the value of QUERY using PL/SQL process?

  Hello
  
  I use APEX 4.2...
  How to set the value of the REQUEST using process of PL/SQL which lies before the header - where the value of the REQUEST should appear on the URL?
  
  Kind regards
  Fateh

  You cannot set a value of demand in a PL/SQL block. You can run a PL/SQL block on a request which is the id of a button for example.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Apress.com/9781430235125
  http://Apex.Oracle.com/pls/Apex/f?p=31517:1
  http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
  -------------------------------------------------------------------

• How to set the value of something in a component of the main application?

  Hello
  
  Maybe I've worked on it too long, but I can't understand how to set the value of the text property of a text entry field in my main application component in a block of mx:Script. I have a component called Login in the components folder, and I need to set the text value of empNum. In my statement of mxml up there, I said these components such as xmlns = "components.*" so, logically, the property, I'm putting a c.Login.empNum.text. I can't understand the correct syntax to make this work, and I've tried everything I can think of. Does anyone have any suggestions? I think this should be easy, and there is just something missing me.
  
  Thank you!
  Holli

  Have you tried to give him an id?

  If later you can make the loginScreen. empNum.text = "my text".

  Laurent,

• How to set the path of the report in a plugin for model

  I'm trying to figure out how to set the path of the report in a plugin process model. I can't find a way to have access to it. It seems this would be a reasonable thing to do since the plug-ins are for the treatment of the results. Does anyone know how to do this? We generally use the sequential process model, but I try to keep my plug-in as independent as possible.

  Thank you.

  If I understand correctly, you want your plug-in, when enabled, change the settings of all other instances of the report OR plugin as their reports share the same directory that your plug-in is configured to use.

  If so, your plug-in can access and change the settings of all other instances of plugin. All instances are passed to all the points of plugin entries in the subproperty of the plugins of the ModelConfiguration parameter table. You can browse this table. Any element of the array with an equal to "NI_ReportGenerator.seq" Base.SequenceFilename is an instance of the report OR plugin. Its report options are stored in the element under PluginSpecific.Options.

  You can change the report options to what you want. Note that the recall of the ReportOptions model is called from template-plugin Initialize entry point, then you might want to ensure that your changes are applied after that, so they are not replaced. To do this, you could make your changes in the Initialize entry point of your plugin and make sure your plugin runs last. To rotate the last, you can set the FileGlobals.ModelPluginComponentDescription.Default.Base.RunOrder in your file of plug-in with a value greater than 0, for example 1.0 (see Help for TestStand > Fundamentals > process template Architecture > plug-in for the model process Architecture > Structure of the plugin sequence files > plugin model of entry Points > Order Execution of Point of entry at run time).

• How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  I found a solution! -Set the size and position of the façade with the help of the

  File > VI properties > window running Position (in category list) > custom (in position of menu drop-down).

  then just accept the current position and size (leave the boxes checked) or set values you want directly (uncheck the boxes and fill in the numbers), or physically position and size the façade and use, the "set to current location" button and press "set size" current All that is easier for you.

  OK so it does not make use of the method VI Methods (Active X) FPRunTimePosRunCustom ([Position], [Size]) but if labview want to make him difficult to use then other means must be found.

• How to set the voltage on a 3.3 volt NI 9237 module?

  Hello

  How to set the voltage on a 3.3 volt NI 9237 module?

  The voltage is now at 2.5 volts.

  This is my first time with this camera.

  This set of MAX or are there jumpers?

  I want the value of the excitation voltage at 3.3 Volts and do not change.

  The NI 9237 is a NEITHER cDAQ-9172.

  Thank you

  Bill

  Hi POBA,.

  This can be set to your programming environment.  For example, LabVIEW Signal Express, a task of MAX, or a DLL call in a text-based environment.  You want to create a strain, tension Custom with excitement, or any bridge based task in any environment.

  "" "In MAX, right-click on your device and choose create a task" acquire signals "analog input"...

  "" "In LabVIEW, place a DAQ Assistant" acquire signals "analog input"...

  "" "In Signal Express, add a step for Acquire" DAQmx Acquire"analog input"...

  In any C language based, you will want to call a function such as: DAQmxCreateAIVoltageChanWithExcit, DAQmxCreateAIStrainGageChan, DAQmxCreateAIBridgeChan

  You can then specify the Source of Exictation to be internal to 3.3V.

  Best,

• How to set the properties of the EOS in the IVI driver

  I am coding a compatible driver IVI (in LabWindows/CVI) for an old GPIB instrument that does not support the EOI. To read the response device, I need to define the character of the EOS and terminate read on EOS. MAX I can correctly set the properties of communication and communicate with the device, but I do not know how to set these values in my driver. I tried if various attributes (for example with viSetAttribute (io, VI_ATTR_TERMCHAR_EN, VI_TRUE)), but still get errors (I guess I should use the incorrect session handles). How to set these properties inside the device IVI driver properly? These parameters must be active for this specific device only - all other devices on the bus use EDI. So I think that I can not just in the world, set this property on the map.

  Any help is appreciated. Thanks in advance,

  Martin

  To change VISA attributes as parameters EOS via the pilot of the IVI, your application must first acquire the handle valid VISA (VISA session) or the IVisaSession interface. The first is applied when the uses of pilot IVI VISA - C API and the latest is applied to when the IVI driver uses VISA COM API. Session handle of the IVI - C (that was returned by the function _init() ) is * NO * a VISA manage so you cannot call the API C VISA with the session handle.

  I don't know if the IVI driver you are using has such a property or attribute allowing to access the handle VISA or IVisaSession interface, but for example, driver Agilent IVI COM "IO" property, which returns the reference to IVisaSession or any good VISA com interface.

  Makoto

• How to set the timeout of read when using channelReader.ReadWaveform?

  I'm using a USB-6210/a. data acquisition, and it works fine until I have to take a longer than 10 s waveform.

  When I take a longer than wave form, I get the error 200284, "some or all of the requested samples are not yet acquired.  To wait for the samples become available use longer read timeout... »

  No problem, I thought, I'll just put a longer period.  I searched through the documentation, and the timeout only I found was the watchdog timeout.  When I wanted a longer value, I get code 200452 State - specific property is not supported by the device or is not applicable to the task.

  I use the code in the example AcqVoltageSamples_IntClk.2008 .net with c# in Visual Studio 2008, .net 3.5 sp1.

  How to set the timeout so that ReadWaveform() is not the time?

  Here is the code:

  privateAnalogMultiChannelReaderchannelReader;

  privateAnalogWaveform awf;

  publicList GetWaveForm()

  {

  Try

  {

  Task getWaveform = newTask();

  getWaveform.AIChannels.CreateVoltageChannel (Channel,"", TerminalConfiguration, RangeMinimum,

  RangeMaximum, AIVoltageUnits.Volts);

  getWaveform.Timing.ConfigureSampleClock ("", SampleRate, SampleClockActiveEdge.Rising,)

  SampleQuantityMode.FiniteSamples, NumSamples);

  getWaveform.Control (TaskAction.Verify);

  channelReader = new AnalogMultiChannelReader (getWaveform.Stream);

  AnalogWaveformdata = channelReader.ReadWaveform (NumSamples);

  AWF = data [0];

  samples As new List();

  for (inti = 0; i)

  returnsamples;

  }

  catch (DaqExceptionexception)

  {

  MessageBox.Show (exception. (Message);

  }

  List of l = newList();

  return l;

  }

  Thank you

  Curt

  Hi Curt,.

  Here is a Knowledge Base that can help you to set the timeout setting in your code:

  The property using Timeout of DAQmx task in Visual Studio

• How to set the zoom settings menu for lecroywaverunner 6050A

  Hello

  I am trying to initialize the zoom settings of a track of the labview on a Lecroy WaveRunner 6050 A fft. I found how to set the parameters of the fft with the manual of the remote control for LeCroy scopes  http://cdn.lecroy.com/files/manuals/wm-rcm-e_rev_d.pdf ) but I have not found how to set the menu zoom settings.

  I also tried with find command using the command of automation of Lecroy. ( http://cdn.lecroy.com/files/manuals/automation_command_ref_manual_wr.pdf ). but I think that there is a problem with the settings of the commands I send to the scope.

  I just need to put the horizontal and vertical centers and scales.

  If anyone can help,

  Thank you.

  Hello

  I use F1 as my FFT here track.

  Commands to change the scales are:

  Vertical Center: VBS ' app. Math.F1.Zoom.VerCenter = XXXX"

  Portrait/div scale: VBS ' app. Math.F1.Zoom.VerScale = XXXX"

  Horizontal at the Center: VBS ' app. Math.F1.Zoom.HorCenter = XXXX"

  Horzontal scale/div: VBS ' app. Math.F1.Zoom.HorScale = XXXX"

  I also want to point you to an application on the scope that will help you.

  If you go to the file menu and select cut, to the office, there is a shortcut to an application called "XStream Browser"

  The browser is an interactive application that will present all automation methods and properties that are available on the scope.  He acually connects to the scope of the request, so you can use it to test various components to see what they do on the scope.  It is very intuitive and I use it exclusively. (this is where I went looking for the commands above for you).

  Here is a link to Chapter 1 of the manual of automation: http://cdn.lecroy.com/files/manuals/04_xstreamautomation_ch1.pdf

  Page 1 - 5 has a quick introduction to the browser and its use.

  I hope that it becomes operational.

  Kind regards

  Leonard Brown

  LeCroy sales engineer

  1-800-5LeCroy

• How to set the parameter of the BIOS under XP?

  I'm trying to boot into the recovery console windows using a bootable XP Recovery console CD. But I do not know how to set the BIOS to achieve this. Can someone give me instructions step by step? Thanks in advance.

  A quick search on Google for

  For Lenovo 3000 change boot sequence

  .. .finds a message in the forum of the Lenovo users who said you choose Start and adjust it.

  I can't check it works, but maybe someone who knows the Lenovo will verify that or tell you what to do.

  It seems like a simple process, but some of the discussions on how to boot from a CD are ridiculously long and full of trail and error.  When you get your job, let know us the good way that works and I'll put it in my notes!

  Here is a link to the Lenovo's Support Page:

  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do?country=us

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!