How to set up a scratch location persistent using PowerCLI 5.1

Similar Questions

• How to set the timeout of read when using channelReader.ReadWaveform?

  I'm using a USB-6210/a. data acquisition, and it works fine until I have to take a longer than 10 s waveform.

  When I take a longer than wave form, I get the error 200284, "some or all of the requested samples are not yet acquired.  To wait for the samples become available use longer read timeout... »

  No problem, I thought, I'll just put a longer period.  I searched through the documentation, and the timeout only I found was the watchdog timeout.  When I wanted a longer value, I get code 200452 State - specific property is not supported by the device or is not applicable to the task.

  I use the code in the example AcqVoltageSamples_IntClk.2008 .net with c# in Visual Studio 2008, .net 3.5 sp1.

  How to set the timeout so that ReadWaveform() is not the time?

  Here is the code:

  privateAnalogMultiChannelReaderchannelReader;

  privateAnalogWaveform awf;

  publicList GetWaveForm()

  {

  Try

  {

  Task getWaveform = newTask();

  getWaveform.AIChannels.CreateVoltageChannel (Channel,"", TerminalConfiguration, RangeMinimum,

  RangeMaximum, AIVoltageUnits.Volts);

  getWaveform.Timing.ConfigureSampleClock ("", SampleRate, SampleClockActiveEdge.Rising,)

  SampleQuantityMode.FiniteSamples, NumSamples);

  getWaveform.Control (TaskAction.Verify);

  channelReader = new AnalogMultiChannelReader (getWaveform.Stream);

  AnalogWaveformdata = channelReader.ReadWaveform (NumSamples);

  AWF = data [0];

  samples As new List();

  for (inti = 0; i)

  returnsamples;

  }

  catch (DaqExceptionexception)

  {

  MessageBox.Show (exception. (Message);

  }

  List of l = newList();

  return l;

  }

  Thank you

  Curt

  Hi Curt,.

  Here is a Knowledge Base that can help you to set the timeout setting in your code:

  The property using Timeout of DAQmx task in Visual Studio

• How to identify the Protocol of network storage using PowerCli

  Hi all

  Does anyone know how to identify the network storage protocol using Powercli? If you do could you please point me in the right direction and appropriate controls to be used.

  Thank you.

  See you soon

  With the Get-EsxCli cmdlet, you get to many of the features esxcli.

  Something like that

  $esxcli = Get-EsxCli -VMHost MyEsx$esxcli.storage.core.path.list()
  

  You can use Select-Object to choose the specific properties of the returned objects.

  For example

  $esxcli = Get-EsxCli -VMHost MyEsx$esxcli.storage.core.path.list() | Select RuntimeName,Transport
  

• How to set up the default location in FF?

  So whenever I check on the 10 day weather, default FF is a good location about 25 miles away. I don't find a way to set MY real in FF position while he is the default one. We live in the foothills and weather is very different from the other city, which is on its shore.

  Questions about the Forecastfox add-on has been published frequently these last time and since you don't mention Google weather 10 day specifically I guessed wrong - so shoot me.

  That said this page on your site?
  http://whatismyipaddress.com/

  Your IP address is usually used to determine your physical location. If you are in a rural area, it may be shifted many miles depending on your ISP and how well they "report" your location on the network to their service. And it can sometimes be misleading many miles when their network is being upgrades; usually just temporarily.

• How to set the dynamic download location?

  I need to set the location of default download as x:\downloads\2012_07 if the current month is July and x:\downloads\2012_08 if the current month is August but not manually, therefore automatically, what can I do with prefs.js (i.e.) user_pref ("browser.download.dir"?),
  Your help will be very appreciated.

  prefs.js alone cannot do what you want. You would need an addon with these characteristics "date" to actively change this pref Windows calendar-based. Try this addon and see how it works for you - don't use it myself.

  https://addons.Mozilla.org/en-us/Firefox/addon/automatic-save-folder/

• How to set up a new email account using the same e-mail address of my old computer?

  How can I configure sup a new email account using the same e-mail address of my old computer?

  Hi Melanie,

  Are you referring to the Mail app or user login account?

  If you are referring to the Mail application, you can consult the following link: Set up Mail and add contacts

  If you are referring to the user login account, you can consult the following link: create a user account

  It will be useful.

  Keep us informed on the status of the issue.

• How to set up a rotating banner ad using DWCS4

  I'm new to DW CS4, I think I'm getting the hang of it, but I'm really having a hard time trying to figure out how to do something rather simple and common.

  I have three pictures, all the same size and I would have show them on my homepage one after another in the same location, then repeat. Change to say every 5 seconds and fade out / in as a transition. I searched the web, using DW and have not found the solution. I found a script that toggles the images, but has no effect of transition. I found that I have to use diapers, but they are now called AP div tags, but it is not obvious to me how I stack these DIVs each on the others or how to say DW how long between transitions. If someone could point me in the right direction I would really appreciate it.

  On a related note, can anyone suggest a complete reference to DW4, CSS, HTML and JAVA maybe? There are many sources on the web of different utility that climbing the learning curve makes me nuts!

  Thank you

  You can do with jquery/php. May take a little reading, but look at the 'demo' page (link below). Its exactly what you need:

  http://www.linein.org/blog/2008/01/10/roate-image-using-jQuery-with-plugin/

  The demo link

  http://www.linein.org/examples/jquery_image_rotate.php

• How to set master password, but do not use it whenever I log on

  I am trying to set master password for administrator, but I don't want to type it every time that I log on computer that Suggestions would be greatly appreciated.

  Hi sangeez2005

   

  It is not possible to have a master password for which you can have a choice. You can have a single specific to a password account you will need to provide or enter it each time you connect to this account.

   

  I hope this helps.

• How to set the password to the PDF using acrobat 11

  Hello

  I use Acrobat 11 and can't find the password setting procedure. I followed the guidelines of support of acrobat, but I can't reach the Encrypt button. Can someone help me solve the problem? Thank you

  Hello

  Tools > protection > encrypt > then choose encrypt with password.

                  

  I hope your problem will be solve.

  Thank you

  Parvez.

• How to set http headers when you are using the BridgeTalk HttpConnection object?

  Hello

  I'm doing http post requests from Illustrator ExtendScript (via BridgeTalk) and most of the time it works. However, the documentation on the use of HttpConnection is nonexistent and trying to find a way to set http headers. The HttpConnection object have once requestheaders and responseheaders property so I suspect it's possible.

  
  

  By default, post requests are sent with the header Content-Type "text/html", and I would like to replace so that I can use "application/x-www-formulaires-urlencoded" or "multipart/form-data".

  Here's what I have so far:

  var http = function (callback) {}

  var bt = new BridgeTalk();

  BT. Target = "bridge."

  var s = ";

  s += "if (!.). ExternalObject.webaccesslib) {\n";

  s += "ExternalObject.webaccesslib = new ExternalObject ('lib: webaccesslib');" \n » ;

  s += "}\n";

  s += "var html =" "; \n » ;

  s += "http var = new HttpConnection ('http://requestb.in/1mo0r1z1'); \n ";

  s += "http.method = 'POST'; \n » ;

  s += "http.requestheaders ="Content-Type, application/x-www-formulaires-urlencoded,"\n";

  s += "http.request = 'abc = 123 & def = 456'; \n » ;

  s += "var c = 0, t =" "; for (var i in http) {& t = (i +': ' + http [i] +'* '); c ++ ;} t =' FRONT ('+ c +):'+ t;} alert (t); \n » ; Debug: to see what properties and values exist on the http object

  s += "http.response = html; \n » ;

  s += "http.execute (); \n » ;

  s += "http.response; \n";

  s += ' var t =' AFTER:'; for (var i in http) {t += (i +': ' + http [i] +'* ') ;} alert (t);} \n » ; Debug: to see the properties and the values have been set after the execution of

  BT. Body = s;

  bt.onResult = function (evt) {}

  callback (evt);

  };

  bt.onError = function (evt) {}

  callback (evt);

  };

  BT. Send();

  };

  Things to note:

  1. If I try to set the property requestheaders as in my code above, the request fails. If I comment on him, the request succeeds. The default value for requestheaders is not set.

  2 looking at the http after a successful request object, displays the properties of reponseheaders to be on: "KeepAlive, connection, Content-Length, 2, Content-Type, text/html;" "charset = utf-8, Date, Wednesday, June 24, 2015 09:45:40 GMT, server, gunicorn/18.0, sponsored by, https://www.runscope.com, Via, vegur 1.1. Before the query runs, the responseheaders has the value undefined to.

  
  

  If someone could help me configure the request (in particular the Content-Type header) headers, I would be eternally grateful!

  
  

  Thank you
  

  
  

  UPDATE:

  Using the ExtendScript SDK, I discovered the responseheaders property is an array of this format: ['Connection', 'keep-alive', 'Content-Length', 2, 'Content-Type', ' text/html'...]

  I tried to put the requestheaders for the same format (I've tried both ['Content-Type', "application/x-www-formulaires-urlencoded"] and ['Connection', 'keep-alive', 'Content-Length', 2, 'Content-Type', "application/x-www-formulaires-urlencoded"...]) with no luck
  

  
  

  
  

  It solved!

  The key to set the content-type header is set the property http.mime as follows:

  s += "http.mime =" application/x-www-formulaires-urlencoded '; \n » ;

  Also to be complete, you can add your own custom steps headers:

  s += "http.requestheaders = ["My-sample-Header","some value"]; \n » ;

• How to set up an alert for cpu use > 90% on a processor Intel Pentium 4 cpu solaris box

  I would like to set up an alert to warn me if the CPU usage is greater than 90%. The problem is there are 4 processors. I can create an alert for each of them to the cpu separately, but I would like to
  usr auto-regroupement CPU and have the fire alert if all 4 processors reach a level of 90%. Is it
  what I would do for the cpu monitoring.  I know that in the past our mysql service would get in a loop and use 90% or more of all processors.
  
  You must use the "CPU usage" metric platform rather every CPU indicator.

  German Laullon
  Web: http://www.laullon.com/
  PhotBlog: http://photoblog.laullon.com/

  On Monday, July 7, 2008 at 17:08, mike monczynski [email protected]> wrote:

  I would like to set up an alert to warn me if the CPU usage is greater than 90%. The problem is there are 4 processors. I can create an alert for each of them to the cpu separately, but I would like to

  usr auto-regroupement CPU and have the fire alert if all 4 processors reach a level of 90%. Is it

  what I would do for the cpu monitoring.  I know that in the past our mysql service would get in a loop and use 90% or more of all processors.

• M-30 series: how to set the fast CD keys in use?

  Hi people, I have formatted the hard drive of M - 30 my friend. Everything is very good, except that I can't put the buttons for fast CD use in function (front left). Are there missing drivers?

  Hello

  you installed the Toshiba software utility CD & tools or have you downloaded these files of Toshiba home page?

  AFAIK you need Toshiba, Toshiba easy keys and Toshiba console controls.

  If you have problems again!

  Rudi Bye

• How to set the partition active windows 7 using the command line

  I activated the system recovery partition, so the windows partition is disabled and I can't start Windows

  Partition Wizard Home Edition:
  (There is also a CD bootable version, this allows to change the partition 'Active')
  http://www.partitionwizard.com/free-partition-manager.html
  Some of the features and functions include: resize and move partitions, Partition recovery after an accidental deletion, Create partition, Delete partition, format partition, convert partition, partition Explore, Hide partition, change the drive letter, the active value partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• How to set the cursor to TextField type uses

  Hello, hope someone can help. I am importing HTML into a TextField called "webText_htm". I also called CSS and it strives to the text style. Player 8 and ActionScript 2
  
  When I mouseover TextField, the cursor changes to I the bar.
  Second problem is that < a href = "" > the hand cursor not report and does nothing when I click on it.
  
  Thanks in advance
  Greg
  
  
  
  

  Eureka! The source of the problem was that if you call createTextField, I don't have to also have another instance of the TextField object on its own layer.

  Maybe this will help someone else.

  Shrinktight

• How can I determine if a virtual server using PowerCLI (powershell)

  Hello

  I'm looking for a way to use PowerCLI to check if a Windows Server is virtual or physical.  What I want to do is the following.  When I apply the patches to Windows I want to run a powershell script to check if the server is virtual or physical.  If the server is a virtual server so I would like to take a snapshot of the server and then apply patches.

  Any help appreciated,

  Dean

  Dean,

  You can use the cmdlet Get - VM PowerCLI to check if the server virtual or physical. If the server is virtual the cmdlet returns an object. If the server is physical the cmdlet will give an error and returns nothing. Something like:

  $vm = Get-VM YourVmName
  If ($vm) {
    New-Snapshot -VM $vm -Name "Before Patch"
  }
  

  Robert