How to set up DAQ devices to send data line by line

Similar Questions

• How to set up a chart and store data points in a table to allow me to do the analysis with him

  Hello

  I am relatively inexperienced, with the help of labview and I try to do the following with the help of an oscilloscope Tektronix TDS 2001 C but have no idea how start.

  (1) load a previously saved regarding the volts/div and setting s/div on oscilloscope

  (2) pass everything that appears on the o-scope on my computer screen

  (3) save the data table so that I can do a scan with it

  I watched some of the diagrams of block of example provided with the driver I downloaded for this particular unit but am still very confused.  Any help would be greatly appreciated

  Hello Chron0,

  I know I guess a little here, but have you downloaded a specific device of ni.com/idnet driver?  This is a good place to find the built-in drivers for third-party devices, and there is one for this particular model.  That being said, when I looked at the examples in the downloaded zip file, I saw a couple of predefined options that look like they should satisfy question #2 of your project based on the method to use to acquire a waveform (permanently, several waveforms, etc.).  Similarly, in the Public folder is a configuration of channel VI which I think should satisfy what you are wanting to do to the #1 question.

  Depending on what you are willing to do data analysis, with regard to the software used, functions, etc., there are several reporting tools in LabVIEW which will allow you to save the table and manipulate later. A good place to begin with, it will be to search for "File i/o" in the search bar helps LabVIEW and select the option under the heading "Palette."  There are several options here that I think might be useful, including writing in the file.vi worksheet.

  It will be also good to be familiar with the Finder example OR in LabVIEW.  There are examples of spreadsheets / saving data, as well as VISA, which you can do some reading on, because the interface VISA, it's how you communicate with this device (Fortunately, the driver already download it!)

  Good luck to go ahead and keep us informed here on your project!

  -Dave C

  Technical sales engineer

  National Instruments

• How to set a text index in the Data Modeler

  Hello
  
  How to set a text index (indextype is ctxsys.context) in data maker?
  
  The SQL command would be:
  
  create index P1_TEXT_BESCHR_SPRACHE on indextype P1_PDM_MODUL_SPRACHE (DESCRIPTION) is ctxsys.context
  parameters ("lexer global_lexer language format column FORMAT STORAGE PDMSTORE")
  Online
  /
  
  
  Thanks in advance for any help.
  
  Monika

  Hi Monika,

  After you create the relational model, you create a physical. In the physical model there is dialog box properties index, where you can set the properties of context index.

• How to set the content of the column for lines of automatic separation

  Hello guys,.
  
  I have a problem with the column width and the content of column in a standard report. In the report are hugh entries that are not interrupted by a space character. I put my column width to a special value by usingen "style css: display block; Width: 300px; ». Now the problem is that some of the entries in the column with a longer width that the column width is set. Then they overlock the entries in the column next to them.
  
  My question is: How to set the column lines of automatic content break after a certain number of characters?
  
  After searching for a couple of websites and discussion thread, I found maybe a reference to the solution. I hope that it helps you to give me an answer.
  
  A4 FORMAT LAST_NAME COLUMN
  */*
  
  concerning
  
  wderr

  Wderr,

  It is more a matter of HTML as a matter of APEX... You can start by looking here:
  http://www.456bereastreet.com/archive/200704/how_to_prevent_html_tables_from_becoming_too_wide/

  Kind regards
  Dan

  Blog: http://DanielMcGhan.us/
  Work: http://SkillBuilders.com/

• How to set the interval of validation after n lines when generating insert statements?

  Hello
  
  I'm trying to script sql insert with a few lines of million using SQL Developer 1.5.4.
  
  I can generate scripts insert ok, but can not see anywhere to set the interval of validation.
  
  In the form of preferences in respect of migration, I see that you can set the interval of validation under data move options, but I guess that's something different.
  
  I know we could use sql loader, but this insert is part of the deployment package that has a series of sql scripts that we run together. So I don't want to run a series of sql scripts, and then run sql loader and then go back to sql scripts.
  
  Am I missing something, or is it simply not possible with SQL Developer?
  
  Thanks in advance for your help,
  
  Pete

  Assuming that you create the insert using the export as Insert feature script, so no way to to do.

  However, once you have generated the SQL to insert script, it is quite easy to add a line at the top that says "set autocommit ", who will then commit automatically after the DML statements successfully . It would probably have a commit and disable autocommit at the end of the script, in the case where the following script awaits undertakes to behave differently.

  theFurryOne

• How to set up a backup to send emails with smtp server when Exchange is hosted

  How can I go on the definition of the Task Scheduler to send the paper with the smtp server, when our Exchange is hosted by Microsoft 365?

  Hi Jay,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Exchange Server on TechNet forum. Please post your question in the Forums TechNet in Exchange Server.

• How to set up the device external bluetooth laptop G62

  My G62 64 GB came with bluetooth already installed. Where and how to do this?

  Hello

  Check the specifications of your model here.

  This notebook is without bluetooth module.

  You can buy usb micro Bluetooth adapter.

  With this kind of device you don't need to even remember then it is plugged.

  A few proposals on Newegg: here, here, here, here and here.

• How to set static IP on Verizon iPad data Plan?

  Hello

  We strive to set up a static IP address on several iPads so they can access a secure on a Verizon data plan Web site. I watched all the videos and went through all the directions I can google and I'm still without a solution. For each solution, in my opinion, it is said to go into the settings > cellular/cell data > cellular data network and click the APN tab to add the information. There is no option cellular data on any of our Verizon data devices.

  

  I called Verizon and Apple support to see how to get this option appears and it was transferred blame game back two hours. In the end, I was told that we need to create a profile of AFN via Apple Configurator 2 or AirWatch. I tried to create the two and to my knowledge, neither work. Or I do not know where the APN tab appears with the profile of the AFN. The only information provided to AFN by Verizon is "MW01. VZWSTATIC ". The ipads are on iOS 9.2.1.

  So here's what I have for our profile Apple Configurator 2 APN.

  

  If anyone has had this problem before and knows a solution you'd make my year!

  Thank you!

  * There is no cellular data network option

• How to set up the single instance of data of high availability and disaster tolerance

  Hi Experts,

  I have unique database and instance need to configure for high availability and disaster tolerance

  What are the DR options available for synchronization of database at a remote site with a delay of 5 to 10 minutes.

  Application connects to the local site and DR site should be the remote site.

  1 oracle FailSafe with SAN?

  2. What is the security integrated on linux centos/oel solution?

  3. If the storage is on the San (for example) then is it possible to set up a shell script

  which detects if the source database is down for 5 minutes, ride the SAN stored the files of database on the remote computer and

  change the ip in the application, so it will never connect to the source ip address

  Thank you and best regards,

  IVW

  Hello

  Rupture can occur in any level

  1 oracle FailSafe with SAN?

  --> Do check if you have failure in storage, your security will do nothing to bring back data

  --> Seen failsafe, will be only the insurance when MS cluster moving the disc and services to different node, configured services starts.

  2. What is the security integrated on linux centos/oel solution?

  --> Under linux, you need to set the scripts to run, and you can check the option on the cluster OS

  3. If the storage is on the San (for example) then it is possible to configure a shell script that detects if data source is down for 5 minutes, mount SAN stored the files of database on the remote computer and

  change the ip in the application, so it will never connect to the source ip address

  --> This you will get a cluster of BONES...

  Points to note:

  ================

  --> If there is power failure sudden, we can expect there may be lost writing in your data block, which will bring the inconsistency to your data file and redo

  --> Here, there is problem with your drive?

  --> If there is problem with your complete domain controller (how will you mount FS to a remote server?)

  Note what we are discussing was HA and you try to keep an idle server all the time (you have a server with more RAM & CPU)

  Why you can't check an option of CARS, can also have the cluster extension...

  And to avoid the loss of data and to meet the RPO and RTO in all time (same DC came down, storage failure, server crash), you may need to use Oracle data guard...

  Ask questions if you have

  Thank you

• How to set the time difference between each data when using keithley 2400 scanning

  Hello friends,

  I use scanning Keithley vi the extent of SCANNING and acquire vi. I want to measure the voltage for each step and a pause between each two data, so I need a delay between each I step.

  I'm a starter to use Labview, thank you very much for your answers.

  Perry

  As Dennis says, if you use the built-in scan function, you will need to consult the manual. See Section 10-16 (this is page 10 of article 16, only paragraphs not but 10, 16) for the manual Keithley 2400.

  The Keithley 24xx series has a speed of measurement in units called PLC (Power Line Cycles). The default speed is 1PLC, which means a measure is taken with each cycle of line 1 power supply or 1/60th of a second (16.67ms). 24XX can range from 0.01 PLC (all 0.16ms) 10 PLC (all 166.6ms). The faster you measure, the less accuracy you get.

  To programmatically set this value, the command is

  ENSe:CURRent:NPLCycles

  ENSe:VOLTage:NPLCycles

  Depending on what you are sensing and where is the number of controllers from 0.01 to 10.

  Another factor that will determine the time between data points is the cycle SDM. These are more complicated, look at your Keithley manual for more information. Look at article 6 and article 11 for more information.

  Note:

  PLC times are based on a cycle of 60 Hz US.

• How to set up the filter to provide data for the last 7 days

  Hello
  
  In our environment of BAM Oracle 11 g, we have a data object that stores a date with the datatime data type field. In the report of BAM, we want to display data only for the last 7 days. Not sure how we can configure the filter to "during the" last 7 days
  
  Can someone help how to achieve this requirement?
  
  Thank you.

  Please try the following-
  (1) open the chart bar in edit mode.
  (2) in the editor view, click on the button 'Properties', then go to the tab "Format of the value.
  (3) in the tab "Format of the value", to "apply to" drop-down list, select your datetime field.
  (4) in the contiguous list of 'Catégories', select 'TimeUnit' as the category.
  (5) in the following list of 'Type', select 'day of the week.
  6) click OK/application to see the relevant changes.

  Now you should be able to see the day of the week on the horizontal axis 'Thursday', 'Saturday', etc.

• How to set the waveform table to start data since the beginning of the race

  
  

  Create a property of the graph node.  The property you are looking for is history.  This property, you can clear the table.

• How to set a dashboard to view daily data?

  Hi all
  
  It is possiable to create a dashboard and displays data only for today?
  I found that I can not use a filter to do.
  
  Kind regards
  Kerr

  Go to filters, choose the filter as: "your datetime/timestamp field"is in the current period"and choose the unit as 'Days'. It will show you the data only for the current day.

• How do I know the difference between level data line in 2 dump files.

  Hello
  I had 2 dump files export different databases (to which I have access).
  They got the same tables and the same number of lines.
  How to compare data in tables (in the dump files).
  
  See you soon,.
  Malika

  user9131570 wrote:
  Hello
  I had 2 dump files export different databases (to which I have access).
  They got the same tables and the same number of lines.
  How to compare data in tables (in the dump files).

  See you soon,.
  Malika

  Why you want to do? What the company need? Without import it, it's not not possible to read the dump file *.

  Aman...

  * If you are using Data pump, you can make a sql file and can see items from the dump file.

• Send data to MySQL localhost

  Hello

  Is there a way to create a submit button to submit the data to the MySQL database on localhost - not via HTML, XML, or another web method. I created a form to fill out on the local client system - each form is properly installed in the binding to the right MySQL table (work of connections). When I looked the submit button, it is XML, XML, PDF, URL. Also in the meantime each field, I could create only the mandatory defauly, the Import/Export link (Execute), as it would allow only a connection of WSDL, not a DB OLEDB connection files, like I did in the default value for each field. In the view data, I can see the correct field and assignment - so I know it would work if I could send the data.

  .... How to create a submit button to send data ffrom the PDF to the local MySQL database? \

  Thanks a lot guys.

  Your attachment has not come through. You can join only through the user interface on the forum, he'll go get no attachments in the mail.

  You would have good orders to assign to each data connection that you want to order. So you can have 4 commands on the button, each maintaining a different database. Don't forget the format indicates that you are dealing with the dataconnection name:

  xfa.sourceSet.dataconnectionName.operation)

  Hope that helps

  Paul